Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 6 insertions, 13 deletions

diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
index 26405efe0f9..6d0feb234d3 100644
--- a/drivers/gpio/gpio-ucb1400.c
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -12,8 +12,6 @@
 #include <linux/module.h>
 #include <linux/ucb1400.h>
 
-struct ucb1400_gpio_data *ucbdata;
-
 static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
 {
 	struct ucb1400_gpio *gpio;
@@ -50,7 +48,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	struct ucb1400_gpio *ucb = dev->dev.platform_data;
 	int err = 0;
 
-	if (!(ucbdata && ucbdata->gpio_offset)) {
+	if (!(ucb && ucb->gpio_offset)) {
 		err = -EINVAL;
 		goto err;
 	}
@@ -58,7 +56,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, ucb);
 
 	ucb->gc.label = "ucb1400_gpio";
-	ucb->gc.base = ucbdata->gpio_offset;
+	ucb->gc.base = ucb->gpio_offset;
 	ucb->gc.ngpio = 10;
 	ucb->gc.owner = THIS_MODULE;
 
@@ -72,8 +70,8 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	if (err)
 		goto err;
 
-	if (ucbdata && ucbdata->gpio_setup)
-		err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
+	if (ucb && ucb->gpio_setup)
+		err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio);
 
 err:
 	return err;
@@ -85,8 +83,8 @@ static int ucb1400_gpio_remove(struct platform_device *dev)
 	int err = 0;
 	struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
 
-	if (ucbdata && ucbdata->gpio_teardown) {
-		err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
+	if (ucb && ucb->gpio_teardown) {
+		err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio);
 		if (err)
 			return err;
 	}
@@ -103,11 +101,6 @@ static struct platform_driver ucb1400_gpio_driver = {
 	},
 };
 
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
-{
-	ucbdata = data;
-}
-
 module_platform_driver(ucb1400_gpio_driver);
 
 MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");