gpio: make gpiod_direction_output take a logical value

The documentation was not clear about whether
gpio_direction_output should take a logical value or the physical
level on the output line, i.e. whether the ACTIVE_LOW status
would be taken into account.

This converts gpiod_direction_output to use the logical level
and adds a new gpiod_direction_output_raw for the raw value.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 48 insertions, 19 deletions

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 50c4922fe53..80da9f1940c 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -350,9 +350,9 @@ static ssize_t gpio_direction_store(struct device *dev,
 	if (!test_bit(FLAG_EXPORT, &desc->flags))
 		status = -EIO;
 	else if (sysfs_streq(buf, "high"))
-		status = gpiod_direction_output(desc, 1);
+		status = gpiod_direction_output_raw(desc, 1);
 	else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low"))
-		status = gpiod_direction_output(desc, 0);
+		status = gpiod_direction_output_raw(desc, 0);
 	else if (sysfs_streq(buf, "in"))
 		status = gpiod_direction_input(desc);
 	else
@@ -1590,7 +1590,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
 	if (flags & GPIOF_DIR_IN)
 		err = gpiod_direction_input(desc);
 	else
-		err = gpiod_direction_output(desc,
+		err = gpiod_direction_output_raw(desc,
 				(flags & GPIOF_INIT_HIGH) ? 1 : 0);
 
 	if (err)
@@ -1756,28 +1756,13 @@ fail:
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_input);
 
-/**
- * gpiod_direction_output - set the GPIO direction to input
- * @desc:	GPIO to set to output
- * @value:	initial output value of the GPIO
- *
- * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
- * be called safely on it. The initial value of the output must be specified.
- *
- * Return 0 in case of success, else an error code.
- */
-int gpiod_direction_output(struct gpio_desc *desc, int value)
+static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 {
 	unsigned long		flags;
 	struct gpio_chip	*chip;
 	int			status = -EINVAL;
 	int offset;
 
-	if (!desc || !desc->chip) {
-		pr_warn("%s: invalid GPIO\n", __func__);
-		return -EINVAL;
-	}
-
 	/* GPIOs used for IRQs shall not be set as output */
 	if (test_bit(FLAG_USED_AS_IRQ, &desc->flags)) {
 		gpiod_err(desc,
@@ -1840,6 +1825,50 @@ fail:
 		gpiod_dbg(desc, "%s: gpio status %d\n", __func__, status);
 	return status;
 }
+
+/**
+ * gpiod_direction_output_raw - set the GPIO direction to output
+ * @desc:	GPIO to set to output
+ * @value:	initial output value of the GPIO
+ *
+ * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
+ * be called safely on it. The initial value of the output must be specified
+ * as raw value on the physical line without regard for the ACTIVE_LOW status.
+ *
+ * Return 0 in case of success, else an error code.
+ */
+int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
+{
+	if (!desc || !desc->chip) {
+		pr_warn("%s: invalid GPIO\n", __func__);
+		return -EINVAL;
+	}
+	return _gpiod_direction_output_raw(desc, value);
+}
+EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
+
+/**
+ * gpiod_direction_output - set the GPIO direction to input
+ * @desc:	GPIO to set to output
+ * @value:	initial output value of the GPIO
+ *
+ * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
+ * be called safely on it. The initial value of the output must be specified
+ * as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
+ * account.
+ *
+ * Return 0 in case of success, else an error code.
+ */
+int gpiod_direction_output(struct gpio_desc *desc, int value)
+{
+	if (!desc || !desc->chip) {
+		pr_warn("%s: invalid GPIO\n", __func__);
+		return -EINVAL;
+	}
+	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
+		value = !value;
+	return _gpiod_direction_output_raw(desc, value);
+}
 EXPORT_SYMBOL_GPL(gpiod_direction_output);
 
 /**