drm/vblank: Add support for precise vblank timestamping.

The DRI2 swap & sync implementation needs precise
vblank counts and precise timestamps corresponding
to those vblank counts. For conformance to the OpenML
OML_sync_control extension specification the DRM
timestamp associated with a vblank count should
correspond to the start of video scanout of the first
scanline of the video frame following the vblank
interval for that vblank count.

Therefore we need to carry around precise timestamps
for vblanks. Currently the DRM and KMS drivers generate
timestamps ad-hoc via do_gettimeofday() in some
places. The resulting timestamps are sometimes not
very precise due to interrupt handling delays, they
don't conform to OML_sync_control and some are wrong,
as they aren't taken synchronized to the vblank.

This patch implements support inside the drm core
for precise and robust timestamping. It consists
of the following interrelated pieces.

1. Vblank timestamp caching:

A per-crtc ringbuffer stores the most recent vblank
timestamps corresponding to vblank counts.

The ringbuffer can be read out lock-free via the
accessor function:

struct timeval timestamp;
vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp).

The function returns the current vblank count and
the corresponding timestamp for start of video
scanout following the vblank interval. It can be
used anywhere between enclosing drm_vblank_get(dev, crtcid)
and drm_vblank_put(dev,crtcid) statements. It is used
inside the drmWaitVblank ioctl and in the vblank event
queueing and handling. It should be used by kms drivers for
timestamping of bufferswap completion.

The timestamp ringbuffer is reinitialized each time
vblank irq's get reenabled in drm_vblank_get()/
drm_update_vblank_count(). It is invalidated when
vblank irq's get disabled.

The ringbuffer is updated inside drm_handle_vblank()
at each vblank irq.

2. Calculation of precise vblank timestamps:

drm_get_last_vbltimestamp() is used to compute the
timestamp for the end of the most recent vblank (if
inside active scanout), or the expected end of the
current vblank interval (if called inside a vblank
interval). The function calls into a new optional kms
driver entry point dev->driver->get_vblank_timestamp()
which is supposed to provide the precise timestamp.
If a kms driver doesn't implement the entry point or
if the call fails, a simple do_gettimeofday() timestamp
is returned as crude approximation of the true vblank time.

A new drm module parameter drm.timestamp_precision_usec
allows to disable high precision timestamps (if set to
zero) or to specify the maximum acceptable error in
the timestamps in microseconds.

Kms drivers could implement their get_vblank_timestamp()
function in a gpu specific way, as long as returned
timestamps conform to OML_sync_control, e.g., by use
of gpu specific hardware timestamps.

Optionally, kms drivers can simply wrap and use the new
utility function drm_calc_vbltimestamp_from_scanoutpos().
This function calls a new optional kms driver function
dev->driver->get_scanout_position() which returns the
current horizontal and vertical video scanout position
of the crtc. The scanout position together with the
drm_display_timing of the current video mode is used
to calculate elapsed time relative to start of active scanout
for the current video frame. This elapsed time is subtracted
from the current do_gettimeofday() time to get the timestamp
corresponding to start of video scanout. Currently
non-interlaced, non-doublescan video modes, with or
without panel scaling are handled correctly. Interlaced/
doublescan modes are tbd in a future patch.

3. Filtering of redundant vblank irq's and removal of
some race-conditions in the vblank irq enable/disable path:

Some gpu's (e.g., Radeon R500/R600) send spurious vblank
irq's outside the vblank if vblank irq's get reenabled.
These get detected by use of the vblank timestamps and
filtered out to avoid miscounting of vblanks.

Some race-conditions between the vblank irq enable/disable
functions, the vblank irq handler and the gpu itself (updating
its hardware vblank counter in the "wrong" moment) are
fixed inside vblank_disable_and_save() and
drm_update_vblank_count() by use of the vblank timestamps and
a new spinlock dev->vblank_time_lock.

The time until vblank irq disable is now configurable via
a new drm module parameter drm.vblankoffdelay to allow
experimentation with timeouts that are much shorter than
the current 5 seconds and should allow longer vblank off
periods for better power savings.

Followup patches will use these new functions to
implement precise timestamping for the intel and radeon
kms drivers.

Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 12 insertions, 1 deletions

diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index f7af91cb273..4c200931a6b 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -336,7 +336,7 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 			      struct drm_framebuffer *old_fb)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_display_mode *adjusted_mode, saved_mode;
+	struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
 	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 	struct drm_encoder_helper_funcs *encoder_funcs;
 	int saved_x, saved_y;
@@ -350,6 +350,7 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	if (!crtc->enabled)
 		return true;
 
+	saved_hwmode = crtc->hwmode;
 	saved_mode = crtc->mode;
 	saved_x = crtc->x;
 	saved_y = crtc->y;
@@ -427,11 +428,21 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 
 	}
 
+	/* Store real post-adjustment hardware mode. */
+	crtc->hwmode = *adjusted_mode;
+
+	/* Calculate and store various constants which
+	 * are later needed by vblank and swap-completion
+	 * timestamping. They are derived from true hwmode.
+	 */
+	drm_calc_timestamping_constants(crtc);
+
 	/* XXX free adjustedmode */
 	drm_mode_destroy(dev, adjusted_mode);
 	/* FIXME: add subpixel order */
 done:
 	if (!ret) {
+		crtc->hwmode = saved_hwmode;
 		crtc->mode = saved_mode;
 		crtc->x = saved_x;
 		crtc->y = saved_y;