gma500: Add Oaktrail support

Oaktrail (GMA600) is found on some tablet/slate PC type systems. It's a bit
different to the GMA500 but similar enough it makes sense to plug it into
the same driver.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 406 insertions, 0 deletions

diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
new file mode 100644
index 00000000000..a552226a08f
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -0,0 +1,406 @@
+/*
+ * Copyright © 2006-2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Dave Airlie <airlied@linux.ie>
+ *	Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <drm/drmP.h>
+#include <asm/mrst.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+
+/* The max/min PWM frequency in BPCR[31:17] - */
+/* The smallest number is 1 (not 0) that can fit in the
+ * 15-bit field of the and then*/
+/* shifts to the left by one bit to get the actual 16-bit
+ * value that the 15-bits correspond to.*/
+#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
+#define BRIGHTNESS_MAX_LEVEL 100
+
+/**
+ * Sets the power state for the panel.
+ */
+static void oaktrail_lvds_set_power(struct drm_device *dev,
+				struct psb_intel_output *output, bool on)
+{
+	u32 pp_status;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	if (on) {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+			  POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
+		dev_priv->is_lvds_on = true;
+		if (dev_priv->ops->lvds_bl_power)
+			dev_priv->ops->lvds_bl_power(dev, true);
+	} else {
+		if (dev_priv->ops->lvds_bl_power)
+			dev_priv->ops->lvds_bl_power(dev, false);
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+			  ~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+		dev_priv->is_lvds_on = false;
+		pm_request_idle(&dev->pdev->dev);
+	}
+	gma_power_end(dev);
+}
+
+static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		oaktrail_lvds_set_power(dev, output, true);
+	else
+		oaktrail_lvds_set_power(dev, output, false);
+
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void oaktrail_lvds_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct psb_intel_mode_device *mode_dev =
+				enc_to_psb_intel_output(encoder)->mode_dev;
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 lvds_port;
+	uint64_t v = DRM_MODE_SCALE_FULLSCREEN;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * psb_intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+	lvds_port = (REG_READ(LVDS) &
+		    (~LVDS_PIPEB_SELECT)) |
+		    LVDS_PORT_EN |
+		    LVDS_BORDER_EN;
+
+	/* If the firmware says dither on Moorestown, or the BIOS does
+	   on Oaktrail then enable dithering */
+	if (mode_dev->panel_wants_dither || dev_priv->lvds_dither)
+		lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE;
+
+	REG_WRITE(LVDS, lvds_port);
+
+	drm_connector_property_get_value(
+		&enc_to_psb_intel_output(encoder)->base,
+		dev->mode_config.scaling_mode_property,
+		&v);
+
+	if (v == DRM_MODE_SCALE_NO_SCALE)
+		REG_WRITE(PFIT_CONTROL, 0);
+	else if (v == DRM_MODE_SCALE_ASPECT) {
+		if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) ||
+		    (mode->hdisplay != adjusted_mode->crtc_hdisplay)) {
+			if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) ==
+			    (mode->hdisplay * adjusted_mode->crtc_vdisplay))
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+			else if ((adjusted_mode->crtc_hdisplay *
+				mode->vdisplay) > (mode->hdisplay *
+				adjusted_mode->crtc_vdisplay))
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
+					  PFIT_SCALING_MODE_PILLARBOX);
+			else
+				REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
+					  PFIT_SCALING_MODE_LETTERBOX);
+		} else
+			REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+	} else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/
+		REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+
+	gma_power_end(dev);
+}
+
+static void oaktrail_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
+					  BACKLIGHT_DUTY_CYCLE_MASK);
+	oaktrail_lvds_set_power(dev, output, false);
+	gma_power_end(dev);
+}
+
+static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 ret;
+
+	if (gma_power_begin(dev, false)) {
+		ret = ((REG_READ(BLC_PWM_CTL) &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+		gma_power_end(dev);
+	} else
+		ret = ((dev_priv->saveBLC_PWM_CTL &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+	return ret;
+}
+
+static void oaktrail_lvds_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (mode_dev->backlight_duty_cycle == 0)
+		mode_dev->backlight_duty_cycle =
+					oaktrail_lvds_get_max_backlight(dev);
+	oaktrail_lvds_set_power(dev, output, true);
+}
+
+static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = {
+	.dpms = oaktrail_lvds_dpms,
+	.mode_fixup = psb_intel_lvds_mode_fixup,
+	.prepare = oaktrail_lvds_prepare,
+	.mode_set = oaktrail_lvds_mode_set,
+	.commit = oaktrail_lvds_commit,
+};
+
+static struct drm_display_mode lvds_configuration_modes[] = {
+	/* hard coded fixed mode for TPO LTPS LPJ040K001A */
+	{ DRM_MODE("800x480",  DRM_MODE_TYPE_DRIVER, 33264, 800, 836,
+		   846, 1056, 0, 480, 489, 491, 525, 0, 0) },
+	/* hard coded fixed mode for LVDS 800x480 */
+	{ DRM_MODE("800x480",  DRM_MODE_TYPE_DRIVER, 30994, 800, 801,
+		   802, 1024, 0, 480, 481, 482, 525, 0, 0) },
+	/* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */
+	{ DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072,
+		   1104, 1184, 0, 600, 603, 604, 608, 0, 0) },
+	/* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */
+	{ DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104,
+		   1136, 1184, 0, 600, 603, 604, 608, 0, 0) },
+	/* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */
+	{ DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124,
+		   1204, 1312, 0, 600, 607, 610, 621, 0, 0) },
+	/* hard coded fixed mode for LVDS 1024x768 */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+		   1184, 1344, 0, 768, 771, 777, 806, 0, 0) },
+	/* hard coded fixed mode for LVDS 1366x768 */
+	{ DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430,
+		   1558, 1664, 0, 768, 769, 770, 776, 0, 0) },
+};
+
+/* Returns the panel fixed mode from configuration. */
+
+static struct drm_display_mode *
+oaktrail_lvds_get_configuration_mode(struct drm_device *dev)
+{
+	struct drm_display_mode *mode = NULL;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD;
+
+	if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/
+		mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+		if (!mode)
+			return NULL;
+
+		mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
+		mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
+		mode->hsync_start = mode->hdisplay + \
+				((ti->hsync_offset_hi << 8) | \
+				ti->hsync_offset_lo);
+		mode->hsync_end = mode->hsync_start + \
+				((ti->hsync_pulse_width_hi << 8) | \
+				ti->hsync_pulse_width_lo);
+		mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
+							ti->hblank_lo);
+		mode->vsync_start = \
+			mode->vdisplay + ((ti->vsync_offset_hi << 4) | \
+						ti->vsync_offset_lo);
+		mode->vsync_end = \
+			mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \
+						ti->vsync_pulse_width_lo);
+		mode->vtotal = mode->vdisplay + \
+				((ti->vblank_hi << 8) | ti->vblank_lo);
+		mode->clock = ti->pixel_clock * 10;
+#if 0
+		printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay);
+		printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay);
+		printk(KERN_INFO "HSS is %d\n", mode->hsync_start);
+		printk(KERN_INFO "HSE is %d\n", mode->hsync_end);
+		printk(KERN_INFO "htotal is %d\n", mode->htotal);
+		printk(KERN_INFO "VSS is %d\n", mode->vsync_start);
+		printk(KERN_INFO "VSE is %d\n", mode->vsync_end);
+		printk(KERN_INFO "vtotal is %d\n", mode->vtotal);
+		printk(KERN_INFO "clock is %d\n", mode->clock);
+#endif
+	} else
+		mode = drm_mode_duplicate(dev, &lvds_configuration_modes[2]);
+
+	drm_mode_set_name(mode);
+	drm_mode_set_crtcinfo(mode, 0);
+
+	return mode;
+}
+
+/**
+ * oaktrail_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void oaktrail_lvds_init(struct drm_device *dev,
+		    struct psb_intel_mode_device *mode_dev)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_psb_private *dev_priv =
+				(struct drm_psb_private *) dev->dev_private;
+	struct edid *edid;
+	int ret = 0;
+	struct i2c_adapter *i2c_adap;
+	struct drm_display_mode *scan;	/* *modes, *bios_mode; */
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+	dev_priv->is_lvds_on = true;
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &psb_intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	psb_intel_output->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &psb_intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	drm_connector_attach_property(connector,
+					dev->mode_config.scaling_mode_property,
+					DRM_MODE_SCALE_FULLSCREEN);
+	drm_connector_attach_property(connector,
+					dev_priv->backlight_property,
+					BRIGHTNESS_MAX_LEVEL);
+
+	mode_dev->panel_wants_dither = false;
+	if (dev_priv->vbt_data.size != 0x00)
+		mode_dev->panel_wants_dither = (dev_priv->gct_data.
+			Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE);
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
+	if (i2c_adap == NULL)
+		dev_err(dev->dev, "No ddc adapter available!\n");
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	if (i2c_adap) {
+		edid = drm_get_edid(connector, i2c_adap);
+		if (edid) {
+			drm_mode_connector_update_edid_property(connector,
+									edid);
+			ret = drm_add_edid_modes(connector, edid);
+			kfree(edid);
+		}
+
+		list_for_each_entry(scan, &connector->probed_modes, head) {
+			if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+				mode_dev->panel_fixed_mode =
+				    drm_mode_duplicate(dev, scan);
+				goto out;	/* FIXME: check for quirks */
+			}
+		}
+	}
+	/*
+	 * If we didn't get EDID, try geting panel timing
+	 * from configuration data
+	 */
+	mode_dev->panel_fixed_mode = oaktrail_lvds_get_configuration_mode(dev);
+
+	if (mode_dev->panel_fixed_mode) {
+		mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
+		goto out;	/* FIXME: check for quirks */
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!mode_dev->panel_fixed_mode) {
+		dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
+		goto failed_find;
+	}
+
+out:
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed_find:
+	dev_dbg(dev->dev, "No LVDS modes found, disabling.\n");
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+
+/* failed_ddc: */
+
+	drm_encoder_cleanup(encoder);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+