Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	arch/x86/kernel/io_apic.c

1 files changed, 442 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
new file mode 100644
index 00000000000..0c8d375e8e3
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -0,0 +1,442 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#include "dvo.h"
+
+/*
+ * register definitions for the i82807aa.
+ *
+ * Documentation on this chipset can be found in datasheet #29069001 at
+ * intel.com.
+ */
+
+/*
+ * VCH Revision & GMBus Base Addr
+ */
+#define VR00		0x00
+# define VR00_BASE_ADDRESS_MASK		0x007f
+
+/*
+ * Functionality Enable
+ */
+#define VR01		0x01
+
+/*
+ * Enable the panel fitter
+ */
+# define VR01_PANEL_FIT_ENABLE		(1 << 3)
+/*
+ * Enables the LCD display.
+ *
+ * This must not be set while VR01_DVO_BYPASS_ENABLE is set.
+ */
+# define VR01_LCD_ENABLE		(1 << 2)
+/** Enables the DVO repeater. */
+# define VR01_DVO_BYPASS_ENABLE		(1 << 1)
+/** Enables the DVO clock */
+# define VR01_DVO_ENABLE		(1 << 0)
+
+/*
+ * LCD Interface Format
+ */
+#define VR10		0x10
+/** Enables LVDS output instead of CMOS */
+# define VR10_LVDS_ENABLE		(1 << 4)
+/** Enables 18-bit LVDS output. */
+# define VR10_INTERFACE_1X18		(0 << 2)
+/** Enables 24-bit LVDS or CMOS output */
+# define VR10_INTERFACE_1X24		(1 << 2)
+/** Enables 2x18-bit LVDS or CMOS output. */
+# define VR10_INTERFACE_2X18		(2 << 2)
+/** Enables 2x24-bit LVDS output */
+# define VR10_INTERFACE_2X24		(3 << 2)
+
+/*
+ * VR20 LCD Horizontal Display Size
+ */
+#define VR20	0x20
+
+/*
+ * LCD Vertical Display Size
+ */
+#define VR21	0x20
+
+/*
+ * Panel power down status
+ */
+#define VR30		0x30
+/** Read only bit indicating that the panel is not in a safe poweroff state. */
+# define VR30_PANEL_ON			(1 << 15)
+
+#define VR40		0x40
+# define VR40_STALL_ENABLE		(1 << 13)
+# define VR40_VERTICAL_INTERP_ENABLE	(1 << 12)
+# define VR40_ENHANCED_PANEL_FITTING	(1 << 11)
+# define VR40_HORIZONTAL_INTERP_ENABLE	(1 << 10)
+# define VR40_AUTO_RATIO_ENABLE		(1 << 9)
+# define VR40_CLOCK_GATING_ENABLE	(1 << 8)
+
+/*
+ * Panel Fitting Vertical Ratio
+ * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2
+ */
+#define VR41		0x41
+
+/*
+ * Panel Fitting Horizontal Ratio
+ * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2
+ */
+#define VR42		0x42
+
+/*
+ * Horizontal Image Size
+ */
+#define VR43		0x43
+
+/* VR80 GPIO 0
+ */
+#define VR80	    0x80
+#define VR81	    0x81
+#define VR82	    0x82
+#define VR83	    0x83
+#define VR84	    0x84
+#define VR85	    0x85
+#define VR86	    0x86
+#define VR87	    0x87
+
+/* VR88 GPIO 8
+ */
+#define VR88	    0x88
+
+/* Graphics BIOS scratch 0
+ */
+#define VR8E	    0x8E
+# define VR8E_PANEL_TYPE_MASK		(0xf << 0)
+# define VR8E_PANEL_INTERFACE_CMOS	(0 << 4)
+# define VR8E_PANEL_INTERFACE_LVDS	(1 << 4)
+# define VR8E_FORCE_DEFAULT_PANEL	(1 << 5)
+
+/* Graphics BIOS scratch 1
+ */
+#define VR8F	    0x8F
+# define VR8F_VCH_PRESENT		(1 << 0)
+# define VR8F_DISPLAY_CONN		(1 << 1)
+# define VR8F_POWER_MASK		(0x3c)
+# define VR8F_POWER_POS			(2)
+
+
+struct ivch_priv {
+	bool quiet;
+
+	uint16_t width, height;
+
+	uint16_t save_VR01;
+	uint16_t save_VR40;
+};
+
+
+static void ivch_dump_regs(struct intel_dvo_device *dvo);
+
+/**
+ * Reads a register on the ivch.
+ *
+ * Each of the 256 registers are 16 bits long.
+ */
+static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	u8 out_buf[1];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 0,
+		},
+		{
+			.addr = 0,
+			.flags = I2C_M_NOSTART,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = I2C_M_RD | I2C_M_NOSTART,
+			.len = 2,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+
+	if (i2c_transfer(&i2cbus->adapter, msgs, 3) == 3) {
+		*data = (in_buf[1] << 8) | in_buf[0];
+		return true;
+	};
+
+	if (!priv->quiet) {
+		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+	return false;
+}
+
+/** Writes a 16-bit register on the ivch */
+static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	u8 out_buf[3];
+	struct i2c_msg msg = {
+		.addr = i2cbus->slave_addr,
+		.flags = 0,
+		.len = 3,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = data & 0xff;
+	out_buf[2] = data >> 8;
+
+	if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+		return true;
+
+	if (!priv->quiet) {
+		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+
+	return false;
+}
+
+/** Probes the given bus and slave address for an ivch */
+static bool ivch_init(struct intel_dvo_device *dvo,
+		      struct intel_i2c_chan *i2cbus)
+{
+	struct ivch_priv *priv;
+	uint16_t temp;
+
+	priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return false;
+
+	dvo->i2c_bus = i2cbus;
+	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->dev_priv = priv;
+	priv->quiet = true;
+
+	if (!ivch_read(dvo, VR00, &temp))
+		goto out;
+	priv->quiet = false;
+
+	/* Since the identification bits are probably zeroes, which doesn't seem
+	 * very unique, check that the value in the base address field matches
+	 * the address it's responding on.
+	 */
+	if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) {
+		DRM_DEBUG("ivch detect failed due to address mismatch "
+			  "(%d vs %d)\n",
+			  (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr);
+		goto out;
+	}
+
+	ivch_read(dvo, VR20, &priv->width);
+	ivch_read(dvo, VR21, &priv->height);
+
+	return true;
+
+out:
+	kfree(priv);
+	return false;
+}
+
+static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo)
+{
+	return connector_status_connected;
+}
+
+static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo,
+					    struct drm_display_mode *mode)
+{
+	if (mode->clock > 112000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+/** Sets the power state of the panel connected to the ivch */
+static void ivch_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	int i;
+	uint16_t vr01, vr30, backlight;
+
+	/* Set the new power state of the panel. */
+	if (!ivch_read(dvo, VR01, &vr01))
+		return;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		backlight = 1;
+	else
+		backlight = 0;
+	ivch_write(dvo, VR80, backlight);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE;
+	else
+		vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE);
+
+	ivch_write(dvo, VR01, vr01);
+
+	/* Wait for the panel to make its state transition */
+	for (i = 0; i < 100; i++) {
+		if (!ivch_read(dvo, VR30, &vr30))
+			break;
+
+		if (((vr30 & VR30_PANEL_ON) != 0) == (mode == DRM_MODE_DPMS_ON))
+			break;
+		udelay(1000);
+	}
+	/* wait some more; vch may fail to resync sometimes without this */
+	udelay(16 * 1000);
+}
+
+static void ivch_mode_set(struct intel_dvo_device *dvo,
+			  struct drm_display_mode *mode,
+			  struct drm_display_mode *adjusted_mode)
+{
+	uint16_t vr40 = 0;
+	uint16_t vr01;
+
+	vr01 = 0;
+	vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE |
+		VR40_HORIZONTAL_INTERP_ENABLE);
+
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay) {
+		uint16_t x_ratio, y_ratio;
+
+		vr01 |= VR01_PANEL_FIT_ENABLE;
+		vr40 |= VR40_CLOCK_GATING_ENABLE;
+		x_ratio = (((mode->hdisplay - 1) << 16) /
+			   (adjusted_mode->hdisplay - 1)) >> 2;
+		y_ratio = (((mode->vdisplay - 1) << 16) /
+			   (adjusted_mode->vdisplay - 1)) >> 2;
+		ivch_write (dvo, VR42, x_ratio);
+		ivch_write (dvo, VR41, y_ratio);
+	} else {
+		vr01 &= ~VR01_PANEL_FIT_ENABLE;
+		vr40 &= ~VR40_CLOCK_GATING_ENABLE;
+	}
+	vr40 &= ~VR40_AUTO_RATIO_ENABLE;
+
+	ivch_write(dvo, VR01, vr01);
+	ivch_write(dvo, VR40, vr40);
+
+	ivch_dump_regs(dvo);
+}
+
+static void ivch_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint16_t val;
+
+	ivch_read(dvo, VR00, &val);
+	DRM_DEBUG("VR00: 0x%04x\n", val);
+	ivch_read(dvo, VR01, &val);
+	DRM_DEBUG("VR01: 0x%04x\n", val);
+	ivch_read(dvo, VR30, &val);
+	DRM_DEBUG("VR30: 0x%04x\n", val);
+	ivch_read(dvo, VR40, &val);
+	DRM_DEBUG("VR40: 0x%04x\n", val);
+
+	/* GPIO registers */
+	ivch_read(dvo, VR80, &val);
+	DRM_DEBUG("VR80: 0x%04x\n", val);
+	ivch_read(dvo, VR81, &val);
+	DRM_DEBUG("VR81: 0x%04x\n", val);
+	ivch_read(dvo, VR82, &val);
+	DRM_DEBUG("VR82: 0x%04x\n", val);
+	ivch_read(dvo, VR83, &val);
+	DRM_DEBUG("VR83: 0x%04x\n", val);
+	ivch_read(dvo, VR84, &val);
+	DRM_DEBUG("VR84: 0x%04x\n", val);
+	ivch_read(dvo, VR85, &val);
+	DRM_DEBUG("VR85: 0x%04x\n", val);
+	ivch_read(dvo, VR86, &val);
+	DRM_DEBUG("VR86: 0x%04x\n", val);
+	ivch_read(dvo, VR87, &val);
+	DRM_DEBUG("VR87: 0x%04x\n", val);
+	ivch_read(dvo, VR88, &val);
+	DRM_DEBUG("VR88: 0x%04x\n", val);
+
+	/* Scratch register 0 - AIM Panel type */
+	ivch_read(dvo, VR8E, &val);
+	DRM_DEBUG("VR8E: 0x%04x\n", val);
+
+	/* Scratch register 1 - Status register */
+	ivch_read(dvo, VR8F, &val);
+	DRM_DEBUG("VR8F: 0x%04x\n", val);
+}
+
+static void ivch_save(struct intel_dvo_device *dvo)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+
+	ivch_read(dvo, VR01, &priv->save_VR01);
+	ivch_read(dvo, VR40, &priv->save_VR40);
+}
+
+static void ivch_restore(struct intel_dvo_device *dvo)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+
+	ivch_write(dvo, VR01, priv->save_VR01);
+	ivch_write(dvo, VR40, priv->save_VR40);
+}
+
+static void ivch_destroy(struct intel_dvo_device *dvo)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+
+	if (priv) {
+		kfree(priv);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops ivch_ops= {
+	.init = ivch_init,
+	.dpms = ivch_dpms,
+	.save = ivch_save,
+	.restore = ivch_restore,
+	.mode_valid = ivch_mode_valid,
+	.mode_set = ivch_mode_set,
+	.detect = ivch_detect,
+	.dump_regs = ivch_dump_regs,
+	.destroy = ivch_destroy,
+};