Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

1 files changed, 54 insertions, 38 deletions

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 2ea33eebf01..b0dd4ea8133 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -54,6 +54,7 @@
 #define DRIVER_DATE		"20080730"
 
 enum pipe {
+	INVALID_PIPE = -1,
 	PIPE_A = 0,
 	PIPE_B,
 	PIPE_C,
@@ -98,14 +99,25 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_TRANSCODER_A,
 	POWER_DOMAIN_TRANSCODER_B,
 	POWER_DOMAIN_TRANSCODER_C,
-	POWER_DOMAIN_TRANSCODER_EDP = POWER_DOMAIN_TRANSCODER_A + 0xF,
+	POWER_DOMAIN_TRANSCODER_EDP,
 	POWER_DOMAIN_VGA,
+	POWER_DOMAIN_INIT,
+
+	POWER_DOMAIN_NUM,
 };
 
+#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
+
 #define POWER_DOMAIN_PIPE(pipe) ((pipe) + POWER_DOMAIN_PIPE_A)
 #define POWER_DOMAIN_PIPE_PANEL_FITTER(pipe) \
 		((pipe) + POWER_DOMAIN_PIPE_A_PANEL_FITTER)
-#define POWER_DOMAIN_TRANSCODER(tran) ((tran) + POWER_DOMAIN_TRANSCODER_A)
+#define POWER_DOMAIN_TRANSCODER(tran) \
+	((tran) == TRANSCODER_EDP ? POWER_DOMAIN_TRANSCODER_EDP : \
+	 (tran) + POWER_DOMAIN_TRANSCODER_A)
+
+#define HSW_ALWAYS_ON_POWER_DOMAINS (		\
+	BIT(POWER_DOMAIN_PIPE_A) |		\
+	BIT(POWER_DOMAIN_TRANSCODER_EDP))
 
 enum hpd_pin {
 	HPD_NONE = 0,
@@ -231,6 +243,7 @@ struct intel_opregion {
 	struct opregion_asle __iomem *asle;
 	void __iomem *vbt;
 	u32 __iomem *lid_state;
+	struct work_struct asle_work;
 };
 #define OPREGION_SIZE            (8*1024)
 
@@ -288,6 +301,7 @@ struct drm_i915_error_state {
 	u32 cpu_ring_tail[I915_NUM_RINGS];
 	u32 error; /* gen6+ */
 	u32 err_int; /* gen7 */
+	u32 bbstate[I915_NUM_RINGS];
 	u32 instpm[I915_NUM_RINGS];
 	u32 instps[I915_NUM_RINGS];
 	u32 extra_instdone[I915_NUM_INSTDONE_REG];
@@ -516,10 +530,12 @@ struct i915_address_space {
 
 	/* FIXME: Need a more generic return type */
 	gen6_gtt_pte_t (*pte_encode)(dma_addr_t addr,
-				     enum i915_cache_level level);
+				     enum i915_cache_level level,
+				     bool valid); /* Create a valid PTE */
 	void (*clear_range)(struct i915_address_space *vm,
 			    unsigned int first_entry,
-			    unsigned int num_entries);
+			    unsigned int num_entries,
+			    bool use_scratch);
 	void (*insert_entries)(struct i915_address_space *vm,
 			       struct sg_table *st,
 			       unsigned int first_entry,
@@ -729,6 +745,9 @@ struct i915_suspend_saved_registers {
 	u32 saveBLC_HIST_CTL;
 	u32 saveBLC_PWM_CTL;
 	u32 saveBLC_PWM_CTL2;
+	u32 saveBLC_HIST_CTL_B;
+	u32 saveBLC_PWM_CTL_B;
+	u32 saveBLC_PWM_CTL2_B;
 	u32 saveBLC_CPU_PWM_CTL;
 	u32 saveBLC_CPU_PWM_CTL2;
 	u32 saveFPB0;
@@ -898,11 +917,21 @@ struct intel_ilk_power_mgmt {
 
 /* Power well structure for haswell */
 struct i915_power_well {
-	struct drm_device *device;
-	spinlock_t lock;
 	/* power well enable/disable usage count */
 	int count;
-	int i915_request;
+};
+
+#define I915_MAX_POWER_WELLS 1
+
+struct i915_power_domains {
+	/*
+	 * Power wells needed for initialization at driver init and suspend
+	 * time are on. They are kept on until after the first modeset.
+	 */
+	bool init_power_on;
+
+	struct mutex lock;
+	struct i915_power_well power_wells[I915_MAX_POWER_WELLS];
 };
 
 struct i915_dri1_state {
@@ -1224,6 +1253,12 @@ enum intel_pipe_crc_source {
 	INTEL_PIPE_CRC_SOURCE_PLANE2,
 	INTEL_PIPE_CRC_SOURCE_PF,
 	INTEL_PIPE_CRC_SOURCE_PIPE,
+	/* TV/DP on pre-gen5/vlv can't use the pipe source. */
+	INTEL_PIPE_CRC_SOURCE_TV,
+	INTEL_PIPE_CRC_SOURCE_DP_B,
+	INTEL_PIPE_CRC_SOURCE_DP_C,
+	INTEL_PIPE_CRC_SOURCE_DP_D,
+	INTEL_PIPE_CRC_SOURCE_AUTO,
 	INTEL_PIPE_CRC_SOURCE_MAX,
 };
 
@@ -1234,10 +1269,11 @@ struct intel_pipe_crc_entry {
 
 #define INTEL_PIPE_CRC_ENTRIES_NR	128
 struct intel_pipe_crc {
-	atomic_t available;		/* exclusive access to the device */
+	spinlock_t lock;
+	bool opened;		/* exclusive access to the result file */
 	struct intel_pipe_crc_entry *entries;
 	enum intel_pipe_crc_source source;
-	atomic_t head, tail;
+	int head, tail;
 	wait_queue_head_t wq;
 };
 
@@ -1365,6 +1401,10 @@ typedef struct drm_i915_private {
 	struct drm_crtc *pipe_to_crtc_mapping[3];
 	wait_queue_head_t pending_flip_queue;
 
+#ifdef CONFIG_DEBUG_FS
+	struct intel_pipe_crc pipe_crc[I915_MAX_PIPES];
+#endif
+
 	int num_shared_dpll;
 	struct intel_shared_dpll shared_dplls[I915_NUM_PLLS];
 	struct intel_ddi_plls ddi_plls;
@@ -1390,8 +1430,7 @@ typedef struct drm_i915_private {
 	 * mchdev_lock in intel_pm.c */
 	struct intel_ilk_power_mgmt ips;
 
-	/* Haswell power well */
-	struct i915_power_well power_well;
+	struct i915_power_domains power_domains;
 
 	struct i915_psr psr;
 
@@ -1445,10 +1484,6 @@ typedef struct drm_i915_private {
 	struct i915_dri1_state dri1;
 	/* Old ums support infrastructure, same warning applies. */
 	struct i915_ums_state ums;
-
-#ifdef CONFIG_DEBUG_FS
-	struct intel_pipe_crc pipe_crc[I915_MAX_PIPES];
-#endif
 } drm_i915_private_t;
 
 static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
@@ -1784,27 +1819,6 @@ struct drm_i915_file_private {
 
 #include "i915_trace.h"
 
-/**
- * RC6 is a special power stage which allows the GPU to enter an very
- * low-voltage mode when idle, using down to 0V while at this stage.  This
- * stage is entered automatically when the GPU is idle when RC6 support is
- * enabled, and as soon as new workload arises GPU wakes up automatically as well.
- *
- * There are different RC6 modes available in Intel GPU, which differentiate
- * among each other with the latency required to enter and leave RC6 and
- * voltage consumed by the GPU in different states.
- *
- * The combination of the following flags define which states GPU is allowed
- * to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and
- * RC6pp is deepest RC6. Their support by hardware varies according to the
- * GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one
- * which brings the most power savings; deeper states save more power, but
- * require higher latency to switch to and wake up.
- */
-#define INTEL_RC6_ENABLE			(1<<0)
-#define INTEL_RC6p_ENABLE			(1<<1)
-#define INTEL_RC6pp_ENABLE			(1<<2)
-
 extern const struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
 extern unsigned int i915_fbpercrtc __always_unused;
@@ -1878,10 +1892,10 @@ extern void intel_uncore_check_errors(struct drm_device *dev);
 extern void intel_uncore_fini(struct drm_device *dev);
 
 void
-i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+i915_enable_pipestat(drm_i915_private_t *dev_priv, enum pipe pipe, u32 mask);
 
 void
-i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+i915_disable_pipestat(drm_i915_private_t *dev_priv, enum pipe pipe, u32 mask);
 
 /* i915_gem.c */
 int i915_gem_init_ioctl(struct drm_device *dev, void *data,
@@ -2175,6 +2189,8 @@ void i915_ppgtt_bind_object(struct i915_hw_ppgtt *ppgtt,
 void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt,
 			      struct drm_i915_gem_object *obj);
 
+void i915_check_and_clear_faults(struct drm_device *dev);
+void i915_gem_suspend_gtt_mappings(struct drm_device *dev);
 void i915_gem_restore_gtt_mappings(struct drm_device *dev);
 int __must_check i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj);
 void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj,