Add Intel ACPI IGD OpRegion support

This adds the support necessary for allowing ACPI backlight control to
work on some newer Intel-based graphics systems. Tested on Thinkpad T61
and HP 2510p hardware.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>

1 files changed, 371 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
new file mode 100644
index 00000000000..1787a0c7e3a
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -0,0 +1,371 @@
+/*
+ * Copyright 2008 Intel Corporation <hong.liu@intel.com>
+ * Copyright 2008 Red Hat <mjg@redhat.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT.  IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/acpi.h>
+
+#include "drmP.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+#define PCI_ASLE 0xe4
+#define PCI_LBPC 0xf4
+#define PCI_ASLS 0xfc
+
+#define OPREGION_SZ            (8*1024)
+#define OPREGION_HEADER_OFFSET 0
+#define OPREGION_ACPI_OFFSET   0x100
+#define OPREGION_SWSCI_OFFSET  0x200
+#define OPREGION_ASLE_OFFSET   0x300
+#define OPREGION_VBT_OFFSET    0x1000
+
+#define OPREGION_SIGNATURE "IntelGraphicsMem"
+#define MBOX_ACPI      (1<<0)
+#define MBOX_SWSCI     (1<<1)
+#define MBOX_ASLE      (1<<2)
+
+struct opregion_header {
+       u8 signature[16];
+       u32 size;
+       u32 opregion_ver;
+       u8 bios_ver[32];
+       u8 vbios_ver[16];
+       u8 driver_ver[16];
+       u32 mboxes;
+       u8 reserved[164];
+} __attribute__((packed));
+
+/* OpRegion mailbox #1: public ACPI methods */
+struct opregion_acpi {
+       u32 drdy;       /* driver readiness */
+       u32 csts;       /* notification status */
+       u32 cevt;       /* current event */
+       u8 rsvd1[20];
+       u32 didl[8];    /* supported display devices ID list */
+       u32 cpdl[8];    /* currently presented display list */
+       u32 cadl[8];    /* currently active display list */
+       u32 nadl[8];    /* next active devices list */
+       u32 aslp;       /* ASL sleep time-out */
+       u32 tidx;       /* toggle table index */
+       u32 chpd;       /* current hotplug enable indicator */
+       u32 clid;       /* current lid state*/
+       u32 cdck;       /* current docking state */
+       u32 sxsw;       /* Sx state resume */
+       u32 evts;       /* ASL supported events */
+       u32 cnot;       /* current OS notification */
+       u32 nrdy;       /* driver status */
+       u8 rsvd2[60];
+} __attribute__((packed));
+
+/* OpRegion mailbox #2: SWSCI */
+struct opregion_swsci {
+       u32 scic;       /* SWSCI command|status|data */
+       u32 parm;       /* command parameters */
+       u32 dslp;       /* driver sleep time-out */
+       u8 rsvd[244];
+} __attribute__((packed));
+
+/* OpRegion mailbox #3: ASLE */
+struct opregion_asle {
+       u32 ardy;       /* driver readiness */
+       u32 aslc;       /* ASLE interrupt command */
+       u32 tche;       /* technology enabled indicator */
+       u32 alsi;       /* current ALS illuminance reading */
+       u32 bclp;       /* backlight brightness to set */
+       u32 pfit;       /* panel fitting state */
+       u32 cblv;       /* current brightness level */
+       u16 bclm[20];   /* backlight level duty cycle mapping table */
+       u32 cpfm;       /* current panel fitting mode */
+       u32 epfm;       /* enabled panel fitting modes */
+       u8 plut[74];    /* panel LUT and identifier */
+       u32 pfmb;       /* PWM freq and min brightness */
+       u8 rsvd[102];
+} __attribute__((packed));
+
+/* ASLE irq request bits */
+#define ASLE_SET_ALS_ILLUM     (1 << 0)
+#define ASLE_SET_BACKLIGHT     (1 << 1)
+#define ASLE_SET_PFIT          (1 << 2)
+#define ASLE_SET_PWM_FREQ      (1 << 3)
+#define ASLE_REQ_MSK           0xf
+
+/* response bits of ASLE irq request */
+#define ASLE_ALS_ILLUM_FAIL    (2<<10)
+#define ASLE_BACKLIGHT_FAIL    (2<<12)
+#define ASLE_PFIT_FAIL         (2<<14)
+#define ASLE_PWM_FREQ_FAIL     (2<<16)
+
+/* ASLE backlight brightness to set */
+#define ASLE_BCLP_VALID                (1<<31)
+#define ASLE_BCLP_MSK          (~(1<<31))
+
+/* ASLE panel fitting request */
+#define ASLE_PFIT_VALID         (1<<31)
+#define ASLE_PFIT_CENTER (1<<0)
+#define ASLE_PFIT_STRETCH_TEXT (1<<1)
+#define ASLE_PFIT_STRETCH_GFX (1<<2)
+
+/* PWM frequency and minimum brightness */
+#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
+#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
+#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
+#define ASLE_PFMB_PWM_VALID (1<<31)
+
+#define ASLE_CBLV_VALID         (1<<31)
+
+static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct opregion_asle *asle = dev_priv->opregion.asle;
+	u32 blc_pwm_ctl, blc_pwm_ctl2;
+
+	if (!(bclp & ASLE_BCLP_VALID))
+		return ASLE_BACKLIGHT_FAIL;
+
+	bclp &= ASLE_BCLP_MSK;
+	if (bclp < 0 || bclp > 255)
+		return ASLE_BACKLIGHT_FAIL;
+
+	blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
+	blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
+	blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2);
+
+	if (blc_pwm_ctl2 & BLM_COMBINATION_MODE)
+		pci_write_config_dword(dev->pdev, PCI_LBPC, bclp);
+	else
+		I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | ((bclp * 0x101)-1));
+
+	asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
+
+	return 0;
+}
+
+static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
+{
+	/* alsi is the current ALS reading in lux. 0 indicates below sensor
+	   range, 0xffff indicates above sensor range. 1-0xfffe are valid */
+	return 0;
+}
+
+static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	if (pfmb & ASLE_PFMB_PWM_VALID) {
+		u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
+		u32 pwm = pfmb & ASLE_PFMB_PWM_MASK;
+		blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK;
+		pwm = pwm >> 9;
+		/* FIXME - what do we do with the PWM? */
+	}
+	return 0;
+}
+
+static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
+{
+	/* Panel fitting is currently controlled by the X code, so this is a
+	   noop until modesetting support works fully */
+	if (!(pfit & ASLE_PFIT_VALID))
+		return ASLE_PFIT_FAIL;
+	return 0;
+}
+
+void opregion_asle_intr(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct opregion_asle *asle = dev_priv->opregion.asle;
+	u32 asle_stat = 0;
+	u32 asle_req;
+
+	if (!asle)
+		return;
+
+	asle_req = asle->aslc & ASLE_REQ_MSK;
+
+	if (!asle_req) {
+		DRM_DEBUG("non asle set request??\n");
+		return;
+	}
+
+	if (asle_req & ASLE_SET_ALS_ILLUM)
+		asle_stat |= asle_set_als_illum(dev, asle->alsi);
+
+	if (asle_req & ASLE_SET_BACKLIGHT)
+		asle_stat |= asle_set_backlight(dev, asle->bclp);
+
+	if (asle_req & ASLE_SET_PFIT)
+		asle_stat |= asle_set_pfit(dev, asle->pfit);
+
+	if (asle_req & ASLE_SET_PWM_FREQ)
+		asle_stat |= asle_set_pwm_freq(dev, asle->pfmb);
+
+	asle->aslc = asle_stat;
+}
+
+#define ASLE_ALS_EN    (1<<0)
+#define ASLE_BLC_EN    (1<<1)
+#define ASLE_PFIT_EN   (1<<2)
+#define ASLE_PFMB_EN   (1<<3)
+
+void opregion_enable_asle(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct opregion_asle *asle = dev_priv->opregion.asle;
+
+	if (asle) {
+		u32 pipeb_stats = I915_READ(PIPEBSTAT);
+		if (IS_MOBILE(dev)) {
+			/* Many devices trigger events with a write to the
+			   legacy backlight controller, so we need to ensure
+			   that it's able to generate interrupts */
+			I915_WRITE(PIPEBSTAT, pipeb_stats |=
+				   I915_LEGACY_BLC_EVENT_ENABLE);
+			i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT |
+					I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
+		} else
+			i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT);
+
+		asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
+			ASLE_PFMB_EN;
+		asle->ardy = 1;
+	}
+}
+
+#define ACPI_EV_DISPLAY_SWITCH (1<<0)
+#define ACPI_EV_LID            (1<<1)
+#define ACPI_EV_DOCK           (1<<2)
+
+static struct intel_opregion *system_opregion;
+
+int intel_opregion_video_event(struct notifier_block *nb, unsigned long val,
+			       void *data)
+{
+	/* The only video events relevant to opregion are 0x80. These indicate
+	   either a docking event, lid switch or display switch request. In
+	   Linux, these are handled by the dock, button and video drivers.
+	   We might want to fix the video driver to be opregion-aware in
+	   future, but right now we just indicate to the firmware that the
+	   request has been handled */
+
+	struct opregion_acpi *acpi;
+
+	if (!system_opregion)
+		return NOTIFY_DONE;
+
+	acpi = system_opregion->acpi;
+	acpi->csts = 0;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block intel_opregion_notifier = {
+	.notifier_call = intel_opregion_video_event,
+};
+
+int intel_opregion_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	void *base;
+	u32 asls, mboxes;
+	int err = 0;
+
+	pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
+	DRM_DEBUG("graphic opregion physical addr: 0x%x\n", asls);
+	if (asls == 0) {
+		DRM_DEBUG("ACPI OpRegion not supported!\n");
+		return -ENOTSUPP;
+	}
+
+	base = ioremap(asls, OPREGION_SZ);
+	if (!base)
+		return -ENOMEM;
+
+	opregion->header = base;
+	if (memcmp(opregion->header->signature, OPREGION_SIGNATURE, 16)) {
+		DRM_DEBUG("opregion signature mismatch\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	mboxes = opregion->header->mboxes;
+	if (mboxes & MBOX_ACPI) {
+		DRM_DEBUG("Public ACPI methods supported\n");
+		opregion->acpi = base + OPREGION_ACPI_OFFSET;
+	} else {
+		DRM_DEBUG("Public ACPI methods not supported\n");
+		err = -ENOTSUPP;
+		goto err_out;
+	}
+	opregion->enabled = 1;
+
+	if (mboxes & MBOX_SWSCI) {
+		DRM_DEBUG("SWSCI supported\n");
+		opregion->swsci = base + OPREGION_SWSCI_OFFSET;
+	}
+	if (mboxes & MBOX_ASLE) {
+		DRM_DEBUG("ASLE supported\n");
+		opregion->asle = base + OPREGION_ASLE_OFFSET;
+	}
+
+	/* Notify BIOS we are ready to handle ACPI video ext notifs.
+	 * Right now, all the events are handled by the ACPI video module.
+	 * We don't actually need to do anything with them. */
+	opregion->acpi->csts = 0;
+	opregion->acpi->drdy = 1;
+
+	system_opregion = opregion;
+	register_acpi_notifier(&intel_opregion_notifier);
+
+	return 0;
+
+err_out:
+	iounmap(opregion->header);
+	opregion->header = NULL;
+	return err;
+}
+
+void intel_opregion_free(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+
+	if (!opregion->enabled)
+		return;
+
+	opregion->acpi->drdy = 0;
+
+	system_opregion = NULL;
+	unregister_acpi_notifier(&intel_opregion_notifier);
+
+	/* just clear all opregion memory pointers now */
+	iounmap(opregion->header);
+	opregion->header = NULL;
+	opregion->acpi = NULL;
+	opregion->swsci = NULL;
+	opregion->asle = NULL;
+
+	opregion->enabled = 0;
+}