Merge tag 'drm-intel-next-2013-12-13' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

- fbc1 improvements from Ville (pre-gm45).
- vlv forcewake improvements from Deepak S.
- Some corner-cases fixes from Mika for the context hang stat code.
- pc8 improvements and prep work for runtime D3 from Paulo, almost ready for
  primetime.
- gen2 dpll fixes from Ville.
- DSI improvements from Shobhit Kumar.
- A few smaller fixes and improvements all over.

[airlied: intel_ddi.c conflict fixed up]

* tag 'drm-intel-next-2013-12-13' of git://people.freedesktop.org/~danvet/drm-intel: (61 commits)
  drm/i915/bdw: Implement ff workarounds
  drm/i915/bdw: Force all Data Cache Data Port access to be Non-Coherent
  drm/i915/bdw: Don't use forcewake needlessly
  drm/i915: Clear out old GT FIFO errors in intel_uncore_early_sanitize()
  drm/i915: dont call irq_put when irq test is on
  drm/i915: Rework the FBC interval/stall stuff a bit
  drm/i915: Enable FBC for all mobile gen2 and gen3 platforms
  drm/i915: FBC_CONTROL2 is gen4 only
  drm/i915: Gen2 FBC1 CFB pitch wants 32B units
  drm/i915: split intel_ddi_pll_mode_set in 2 pieces
  drm/i915: Fix timeout with missed interrupts in __wait_seqno
  drm/i915: touch VGA MSR after we enable the power well
  drm/i915: extract hsw_power_well_post_{enable, disable}
  drm/i915: remove i915_disable_vga_mem declaration
  drm/i915: Parametrize the dphy and other spec specific parameters
  drm/i915: Remove redundant DSI PLL enabling
  drm/i915: Reorganize the DSI enable/disable sequence
  drm/i915: Try harder to get best m, n, p values with minimal error
  drm/i915: Compute dsi_clk from pixel clock
  drm/i915: Use FLISDSI interface for band gap reset
  ...

Conflicts:
	drivers/gpu/drm/i915/intel_ddi.c

1 files changed, 91 insertions, 22 deletions

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index c8382f55870..d7d2683b89d 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -73,7 +73,7 @@ static const u32 hsw_ddi_translations_hdmi[] = {
 };
 
 static const u32 bdw_ddi_translations_edp[] = {
-	0x00FFFFFF, 0x00000012,		/* DP parameters */
+	0x00FFFFFF, 0x00000012,		/* eDP parameters */
 	0x00EBAFFF, 0x00020011,
 	0x00C71FFF, 0x0006000F,
 	0x00FFFFFF, 0x00020011,
@@ -696,21 +696,23 @@ intel_ddi_calculate_wrpll(int clock /* in Hz */,
 	*n2_out = best.n2;
 	*p_out = best.p;
 	*r2_out = best.r2;
-
-	DRM_DEBUG_KMS("WRPLL: %dHz refresh rate with p=%d, n2=%d r2=%d\n",
-		      clock, *p_out, *n2_out, *r2_out);
 }
 
-bool intel_ddi_pll_mode_set(struct drm_crtc *crtc)
+/*
+ * Tries to find a PLL for the CRTC. If it finds, it increases the refcount and
+ * stores it in intel_crtc->ddi_pll_sel, so other mode sets won't be able to
+ * steal the selected PLL. You need to call intel_ddi_pll_enable to actually
+ * enable the PLL.
+ */
+bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
 {
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_crtc *crtc = &intel_crtc->base;
 	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
 	struct drm_encoder *encoder = &intel_encoder->base;
 	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
 	struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
 	int type = intel_encoder->type;
 	enum pipe pipe = intel_crtc->pipe;
-	uint32_t reg, val;
 	int clock = intel_crtc->config.port_clock;
 
 	intel_ddi_put_crtc_pll(crtc);
@@ -734,10 +736,8 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc)
 			return false;
 		}
 
-		/* We don't need to turn any PLL on because we'll use LCPLL. */
-		return true;
-
 	} else if (type == INTEL_OUTPUT_HDMI) {
+		uint32_t reg, val;
 		unsigned p, n2, r2;
 
 		intel_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p);
@@ -767,6 +767,9 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc)
 			return false;
 		}
 
+		DRM_DEBUG_KMS("WRPLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n",
+			      clock, p, n2, r2);
+
 		if (reg == WRPLL_CTL1) {
 			plls->wrpll1_refcount++;
 			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL1;
@@ -780,29 +783,98 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc)
 			DRM_DEBUG_KMS("Using SPLL on pipe %c\n",
 				      pipe_name(pipe));
 			plls->spll_refcount++;
-			reg = SPLL_CTL;
 			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_SPLL;
 		} else {
 			DRM_ERROR("SPLL already in use\n");
 			return false;
 		}
 
-		WARN(I915_READ(reg) & SPLL_PLL_ENABLE,
-		     "SPLL already enabled\n");
-
-		val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;
-
 	} else {
 		WARN(1, "Invalid DDI encoder type %d\n", type);
 		return false;
 	}
 
-	I915_WRITE(reg, val);
-	udelay(20);
-
 	return true;
 }
 
+/*
+ * To be called after intel_ddi_pll_select(). That one selects the PLL to be
+ * used, this one actually enables the PLL.
+ */
+void intel_ddi_pll_enable(struct intel_crtc *crtc)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
+	int clock = crtc->config.port_clock;
+	uint32_t reg, cur_val, new_val;
+	int refcount;
+	const char *pll_name;
+	uint32_t enable_bit = (1 << 31);
+	unsigned int p, n2, r2;
+
+	BUILD_BUG_ON(enable_bit != SPLL_PLL_ENABLE);
+	BUILD_BUG_ON(enable_bit != WRPLL_PLL_ENABLE);
+
+	switch (crtc->ddi_pll_sel) {
+	case PORT_CLK_SEL_LCPLL_2700:
+	case PORT_CLK_SEL_LCPLL_1350:
+	case PORT_CLK_SEL_LCPLL_810:
+		/*
+		 * LCPLL should always be enabled at this point of the mode set
+		 * sequence, so nothing to do.
+		 */
+		return;
+
+	case PORT_CLK_SEL_SPLL:
+		pll_name = "SPLL";
+		reg = SPLL_CTL;
+		refcount = plls->spll_refcount;
+		new_val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz |
+			  SPLL_PLL_SSC;
+		break;
+
+	case PORT_CLK_SEL_WRPLL1:
+	case PORT_CLK_SEL_WRPLL2:
+		if (crtc->ddi_pll_sel == PORT_CLK_SEL_WRPLL1) {
+			pll_name = "WRPLL1";
+			reg = WRPLL_CTL1;
+			refcount = plls->wrpll1_refcount;
+		} else {
+			pll_name = "WRPLL2";
+			reg = WRPLL_CTL2;
+			refcount = plls->wrpll2_refcount;
+		}
+
+		intel_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p);
+
+		new_val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 |
+			  WRPLL_DIVIDER_REFERENCE(r2) |
+			  WRPLL_DIVIDER_FEEDBACK(n2) | WRPLL_DIVIDER_POST(p);
+
+		break;
+
+	case PORT_CLK_SEL_NONE:
+		WARN(1, "Bad selected pll: PORT_CLK_SEL_NONE\n");
+		return;
+	default:
+		WARN(1, "Bad selected pll: 0x%08x\n", crtc->ddi_pll_sel);
+		return;
+	}
+
+	cur_val = I915_READ(reg);
+
+	WARN(refcount < 1, "Bad %s refcount: %d\n", pll_name, refcount);
+	if (refcount == 1) {
+		WARN(cur_val & enable_bit, "%s already enabled\n", pll_name);
+		I915_WRITE(reg, new_val);
+		POSTING_READ(reg);
+		udelay(20);
+	} else {
+		WARN((cur_val & enable_bit) == 0, "%s disabled\n", pll_name);
+	}
+}
+
 void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
@@ -1122,9 +1194,7 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
 
 	if (type == INTEL_OUTPUT_EDP) {
 		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-		ironlake_edp_panel_vdd_on(intel_dp);
 		ironlake_edp_panel_on(intel_dp);
-		ironlake_edp_panel_vdd_off(intel_dp, true);
 	}
 
 	WARN_ON(intel_crtc->ddi_pll_sel == PORT_CLK_SEL_NONE);
@@ -1167,7 +1237,6 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
 
 	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
 		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-		ironlake_edp_panel_vdd_on(intel_dp);
 		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
 		ironlake_edp_panel_off(intel_dp);
 	}