diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-05-24 12:06:40 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-05-24 12:06:40 -0700 |
| commit | 98b98d316349e9a028e632629fe813d07fa5afdd (patch) | |
| tree | caaf6a662a86c5e2a418f0929ca05f0748803ac5 /drivers/gpu/drm/i915/intel_display.c | |
| parent | 0d66cba1ac3ad38614077443d604d6a09cec99de (diff) | |
| parent | 931474c4c30633400ff0dff8fb452ae20e01d067 (diff) | |
Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits)
drivers/gpu/drm/radeon/atom.c: fix warning
drm/radeon/kms: bump kms version number
drm/radeon/kms: properly set num banks for fusion asics
drm/radeon/kms/atom: move dig phy init out of modesetting
drm/radeon/kms/cayman: fix typo in register mask
drm/radeon/kms: fix typo in spread spectrum code
drm/radeon/kms: fix tile_config value reported to userspace on cayman.
drm/radeon/kms: fix incorrect comparison in cayman setup code.
drm/radeon/kms: add wait idle ioctl for eg->cayman
drm/radeon/cayman: setup hdp to invalidate and flush when asked
drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked
agp/uninorth: Fix lockups with radeon KMS and >1x.
drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only
drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices
drm/radeon/kms: fixup eDP connector handling
drm/radeon/kms: bail early for eDP in hotplug callback
drm/radeon/kms: simplify hotplug handler logic
drm/radeon/kms: rewrite DP handling
drm/radeon/kms/atom: add support for setting DP panel mode
drm/radeon/kms: atombios.h updates for DP panel mode
...
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 2303 |
1 files changed, 1344 insertions, 959 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2166ee071dd..f553ddfdc16 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -76,255 +76,6 @@ struct intel_limit { int, int, intel_clock_t *); }; -#define I8XX_DOT_MIN 25000 -#define I8XX_DOT_MAX 350000 -#define I8XX_VCO_MIN 930000 -#define I8XX_VCO_MAX 1400000 -#define I8XX_N_MIN 3 -#define I8XX_N_MAX 16 -#define I8XX_M_MIN 96 -#define I8XX_M_MAX 140 -#define I8XX_M1_MIN 18 -#define I8XX_M1_MAX 26 -#define I8XX_M2_MIN 6 -#define I8XX_M2_MAX 16 -#define I8XX_P_MIN 4 -#define I8XX_P_MAX 128 -#define I8XX_P1_MIN 2 -#define I8XX_P1_MAX 33 -#define I8XX_P1_LVDS_MIN 1 -#define I8XX_P1_LVDS_MAX 6 -#define I8XX_P2_SLOW 4 -#define I8XX_P2_FAST 2 -#define I8XX_P2_LVDS_SLOW 14 -#define I8XX_P2_LVDS_FAST 7 -#define I8XX_P2_SLOW_LIMIT 165000 - -#define I9XX_DOT_MIN 20000 -#define I9XX_DOT_MAX 400000 -#define I9XX_VCO_MIN 1400000 -#define I9XX_VCO_MAX 2800000 -#define PINEVIEW_VCO_MIN 1700000 -#define PINEVIEW_VCO_MAX 3500000 -#define I9XX_N_MIN 1 -#define I9XX_N_MAX 6 -/* Pineview's Ncounter is a ring counter */ -#define PINEVIEW_N_MIN 3 -#define PINEVIEW_N_MAX 6 -#define I9XX_M_MIN 70 -#define I9XX_M_MAX 120 -#define PINEVIEW_M_MIN 2 -#define PINEVIEW_M_MAX 256 -#define I9XX_M1_MIN 10 -#define I9XX_M1_MAX 22 -#define I9XX_M2_MIN 5 -#define I9XX_M2_MAX 9 -/* Pineview M1 is reserved, and must be 0 */ -#define PINEVIEW_M1_MIN 0 -#define PINEVIEW_M1_MAX 0 -#define PINEVIEW_M2_MIN 0 -#define PINEVIEW_M2_MAX 254 -#define I9XX_P_SDVO_DAC_MIN 5 -#define I9XX_P_SDVO_DAC_MAX 80 -#define I9XX_P_LVDS_MIN 7 -#define I9XX_P_LVDS_MAX 98 -#define PINEVIEW_P_LVDS_MIN 7 -#define PINEVIEW_P_LVDS_MAX 112 -#define I9XX_P1_MIN 1 -#define I9XX_P1_MAX 8 -#define I9XX_P2_SDVO_DAC_SLOW 10 -#define I9XX_P2_SDVO_DAC_FAST 5 -#define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 -#define I9XX_P2_LVDS_SLOW 14 -#define I9XX_P2_LVDS_FAST 7 -#define I9XX_P2_LVDS_SLOW_LIMIT 112000 - -/*The parameter is for SDVO on G4x platform*/ -#define G4X_DOT_SDVO_MIN 25000 -#define G4X_DOT_SDVO_MAX 270000 -#define G4X_VCO_MIN 1750000 -#define G4X_VCO_MAX 3500000 -#define G4X_N_SDVO_MIN 1 -#define G4X_N_SDVO_MAX 4 -#define G4X_M_SDVO_MIN 104 -#define G4X_M_SDVO_MAX 138 -#define G4X_M1_SDVO_MIN 17 -#define G4X_M1_SDVO_MAX 23 -#define G4X_M2_SDVO_MIN 5 -#define G4X_M2_SDVO_MAX 11 -#define G4X_P_SDVO_MIN 10 -#define G4X_P_SDVO_MAX 30 -#define G4X_P1_SDVO_MIN 1 -#define G4X_P1_SDVO_MAX 3 -#define G4X_P2_SDVO_SLOW 10 -#define G4X_P2_SDVO_FAST 10 -#define G4X_P2_SDVO_LIMIT 270000 - -/*The parameter is for HDMI_DAC on G4x platform*/ -#define G4X_DOT_HDMI_DAC_MIN 22000 -#define G4X_DOT_HDMI_DAC_MAX 400000 -#define G4X_N_HDMI_DAC_MIN 1 -#define G4X_N_HDMI_DAC_MAX 4 -#define G4X_M_HDMI_DAC_MIN 104 -#define G4X_M_HDMI_DAC_MAX 138 -#define G4X_M1_HDMI_DAC_MIN 16 -#define G4X_M1_HDMI_DAC_MAX 23 -#define G4X_M2_HDMI_DAC_MIN 5 -#define G4X_M2_HDMI_DAC_MAX 11 -#define G4X_P_HDMI_DAC_MIN 5 -#define G4X_P_HDMI_DAC_MAX 80 -#define G4X_P1_HDMI_DAC_MIN 1 -#define G4X_P1_HDMI_DAC_MAX 8 -#define G4X_P2_HDMI_DAC_SLOW 10 -#define G4X_P2_HDMI_DAC_FAST 5 -#define G4X_P2_HDMI_DAC_LIMIT 165000 - -/*The parameter is for SINGLE_CHANNEL_LVDS on G4x platform*/ -#define G4X_DOT_SINGLE_CHANNEL_LVDS_MIN 20000 -#define G4X_DOT_SINGLE_CHANNEL_LVDS_MAX 115000 -#define G4X_N_SINGLE_CHANNEL_LVDS_MIN 1 -#define G4X_N_SINGLE_CHANNEL_LVDS_MAX 3 -#define G4X_M_SINGLE_CHANNEL_LVDS_MIN 104 -#define G4X_M_SINGLE_CHANNEL_LVDS_MAX 138 -#define G4X_M1_SINGLE_CHANNEL_LVDS_MIN 17 -#define G4X_M1_SINGLE_CHANNEL_LVDS_MAX 23 -#define G4X_M2_SINGLE_CHANNEL_LVDS_MIN 5 -#define G4X_M2_SINGLE_CHANNEL_LVDS_MAX 11 -#define G4X_P_SINGLE_CHANNEL_LVDS_MIN 28 -#define G4X_P_SINGLE_CHANNEL_LVDS_MAX 112 -#define G4X_P1_SINGLE_CHANNEL_LVDS_MIN 2 -#define G4X_P1_SINGLE_CHANNEL_LVDS_MAX 8 -#define G4X_P2_SINGLE_CHANNEL_LVDS_SLOW 14 -#define G4X_P2_SINGLE_CHANNEL_LVDS_FAST 14 -#define G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT 0 - -/*The parameter is for DUAL_CHANNEL_LVDS on G4x platform*/ -#define G4X_DOT_DUAL_CHANNEL_LVDS_MIN 80000 -#define G4X_DOT_DUAL_CHANNEL_LVDS_MAX 224000 -#define G4X_N_DUAL_CHANNEL_LVDS_MIN 1 -#define G4X_N_DUAL_CHANNEL_LVDS_MAX 3 -#define G4X_M_DUAL_CHANNEL_LVDS_MIN 104 -#define G4X_M_DUAL_CHANNEL_LVDS_MAX 138 -#define G4X_M1_DUAL_CHANNEL_LVDS_MIN 17 -#define G4X_M1_DUAL_CHANNEL_LVDS_MAX 23 -#define G4X_M2_DUAL_CHANNEL_LVDS_MIN 5 -#define G4X_M2_DUAL_CHANNEL_LVDS_MAX 11 -#define G4X_P_DUAL_CHANNEL_LVDS_MIN 14 -#define G4X_P_DUAL_CHANNEL_LVDS_MAX 42 -#define G4X_P1_DUAL_CHANNEL_LVDS_MIN 2 -#define G4X_P1_DUAL_CHANNEL_LVDS_MAX 6 -#define G4X_P2_DUAL_CHANNEL_LVDS_SLOW 7 -#define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7 -#define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0 - -/*The parameter is for DISPLAY PORT on G4x platform*/ -#define G4X_DOT_DISPLAY_PORT_MIN 161670 -#define G4X_DOT_DISPLAY_PORT_MAX 227000 -#define G4X_N_DISPLAY_PORT_MIN 1 -#define G4X_N_DISPLAY_PORT_MAX 2 -#define G4X_M_DISPLAY_PORT_MIN 97 -#define G4X_M_DISPLAY_PORT_MAX 108 -#define G4X_M1_DISPLAY_PORT_MIN 0x10 -#define G4X_M1_DISPLAY_PORT_MAX 0x12 -#define G4X_M2_DISPLAY_PORT_MIN 0x05 -#define G4X_M2_DISPLAY_PORT_MAX 0x06 -#define G4X_P_DISPLAY_PORT_MIN 10 -#define G4X_P_DISPLAY_PORT_MAX 20 -#define G4X_P1_DISPLAY_PORT_MIN 1 -#define G4X_P1_DISPLAY_PORT_MAX 2 -#define G4X_P2_DISPLAY_PORT_SLOW 10 -#define G4X_P2_DISPLAY_PORT_FAST 10 -#define G4X_P2_DISPLAY_PORT_LIMIT 0 - -/* Ironlake / Sandybridge */ -/* as we calculate clock using (register_value + 2) for - N/M1/M2, so here the range value for them is (actual_value-2). - */ -#define IRONLAKE_DOT_MIN 25000 -#define IRONLAKE_DOT_MAX 350000 -#define IRONLAKE_VCO_MIN 1760000 -#define IRONLAKE_VCO_MAX 3510000 -#define IRONLAKE_M1_MIN 12 -#define IRONLAKE_M1_MAX 22 -#define IRONLAKE_M2_MIN 5 -#define IRONLAKE_M2_MAX 9 -#define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */ - -/* We have parameter ranges for different type of outputs. */ - -/* DAC & HDMI Refclk 120Mhz */ -#define IRONLAKE_DAC_N_MIN 1 -#define IRONLAKE_DAC_N_MAX 5 -#define IRONLAKE_DAC_M_MIN 79 -#define IRONLAKE_DAC_M_MAX 127 -#define IRONLAKE_DAC_P_MIN 5 -#define IRONLAKE_DAC_P_MAX 80 -#define IRONLAKE_DAC_P1_MIN 1 -#define IRONLAKE_DAC_P1_MAX 8 -#define IRONLAKE_DAC_P2_SLOW 10 -#define IRONLAKE_DAC_P2_FAST 5 - -/* LVDS single-channel 120Mhz refclk */ -#define IRONLAKE_LVDS_S_N_MIN 1 -#define IRONLAKE_LVDS_S_N_MAX 3 -#define IRONLAKE_LVDS_S_M_MIN 79 -#define IRONLAKE_LVDS_S_M_MAX 118 -#define IRONLAKE_LVDS_S_P_MIN 28 -#define IRONLAKE_LVDS_S_P_MAX 112 -#define IRONLAKE_LVDS_S_P1_MIN 2 -#define IRONLAKE_LVDS_S_P1_MAX 8 -#define IRONLAKE_LVDS_S_P2_SLOW 14 -#define IRONLAKE_LVDS_S_P2_FAST 14 - -/* LVDS dual-channel 120Mhz refclk */ -#define IRONLAKE_LVDS_D_N_MIN 1 -#define IRONLAKE_LVDS_D_N_MAX 3 -#define IRONLAKE_LVDS_D_M_MIN 79 -#define IRONLAKE_LVDS_D_M_MAX 127 -#define IRONLAKE_LVDS_D_P_MIN 14 -#define IRONLAKE_LVDS_D_P_MAX 56 -#define IRONLAKE_LVDS_D_P1_MIN 2 -#define IRONLAKE_LVDS_D_P1_MAX 8 -#define IRONLAKE_LVDS_D_P2_SLOW 7 -#define IRONLAKE_LVDS_D_P2_FAST 7 - -/* LVDS single-channel 100Mhz refclk */ -#define IRONLAKE_LVDS_S_SSC_N_MIN 1 -#define IRONLAKE_LVDS_S_SSC_N_MAX 2 -#define IRONLAKE_LVDS_S_SSC_M_MIN 79 -#define IRONLAKE_LVDS_S_SSC_M_MAX 126 -#define IRONLAKE_LVDS_S_SSC_P_MIN 28 -#define IRONLAKE_LVDS_S_SSC_P_MAX 112 -#define IRONLAKE_LVDS_S_SSC_P1_MIN 2 -#define IRONLAKE_LVDS_S_SSC_P1_MAX 8 -#define IRONLAKE_LVDS_S_SSC_P2_SLOW 14 -#define IRONLAKE_LVDS_S_SSC_P2_FAST 14 - -/* LVDS dual-channel 100Mhz refclk */ -#define IRONLAKE_LVDS_D_SSC_N_MIN 1 -#define IRONLAKE_LVDS_D_SSC_N_MAX 3 -#define IRONLAKE_LVDS_D_SSC_M_MIN 79 -#define IRONLAKE_LVDS_D_SSC_M_MAX 126 -#define IRONLAKE_LVDS_D_SSC_P_MIN 14 -#define IRONLAKE_LVDS_D_SSC_P_MAX 42 -#define IRONLAKE_LVDS_D_SSC_P1_MIN 2 -#define IRONLAKE_LVDS_D_SSC_P1_MAX 6 -#define IRONLAKE_LVDS_D_SSC_P2_SLOW 7 -#define IRONLAKE_LVDS_D_SSC_P2_FAST 7 - -/* DisplayPort */ -#define IRONLAKE_DP_N_MIN 1 -#define IRONLAKE_DP_N_MAX 2 -#define IRONLAKE_DP_M_MIN 81 -#define IRONLAKE_DP_M_MAX 90 -#define IRONLAKE_DP_P_MIN 10 -#define IRONLAKE_DP_P_MAX 20 -#define IRONLAKE_DP_P2_FAST 10 -#define IRONLAKE_DP_P2_SLOW 10 -#define IRONLAKE_DP_P2_LIMIT 0 -#define IRONLAKE_DP_P1_MIN 1 -#define IRONLAKE_DP_P1_MAX 2 - /* FDI */ #define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */ @@ -353,292 +104,253 @@ intel_fdi_link_freq(struct drm_device *dev) } static const intel_limit_t intel_limits_i8xx_dvo = { - .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, - .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, - .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, - .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, - .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, - .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, - .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, - .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX }, - .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, - .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 930000, .max = 1400000 }, + .n = { .min = 3, .max = 16 }, + .m = { .min = 96, .max = 140 }, + .m1 = { .min = 18, .max = 26 }, + .m2 = { .min = 6, .max = 16 }, + .p = { .min = 4, .max = 128 }, + .p1 = { .min = 2, .max = 33 }, + .p2 = { .dot_limit = 165000, + .p2_slow = 4, .p2_fast = 2 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i8xx_lvds = { - .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, - .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, - .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, - .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, - .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, - .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, - .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, - .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX }, - .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, - .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 930000, .max = 1400000 }, + .n = { .min = 3, .max = 16 }, + .m = { .min = 96, .max = 140 }, + .m1 = { .min = 18, .max = 26 }, + .m2 = { .min = 6, .max = 16 }, + .p = { .min = 4, .max = 128 }, + .p1 = { .min = 1, .max = 6 }, + .p2 = { .dot_limit = 165000, + .p2_slow = 14, .p2_fast = 7 }, .find_pll = intel_find_best_PLL, }; - + static const intel_limit_t intel_limits_i9xx_sdvo = { - .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, - .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, - .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, - .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, - .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, - .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, - .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, - .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, - .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, - .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, + .dot = { .min = 20000, .max = 400000 }, + .vco = { .min = 1400000, .max = 2800000 }, + .n = { .min = 1, .max = 6 }, + .m = { .min = 70, .max = 120 }, + .m1 = { .min = 10, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 5, .max = 80 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 200000, + .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_lvds = { - .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, - .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, - .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, - .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, - .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, - .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, - .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX }, - .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, - /* The single-channel range is 25-112Mhz, and dual-channel - * is 80-224Mhz. Prefer single channel as much as possible. - */ - .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, - .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, + .dot = { .min = 20000, .max = 400000 }, + .vco = { .min = 1400000, .max = 2800000 }, + .n = { .min = 1, .max = 6 }, + .m = { .min = 70, .max = 120 }, + .m1 = { .min = 10, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 7, .max = 98 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 112000, + .p2_slow = 14, .p2_fast = 7 }, .find_pll = intel_find_best_PLL, }; - /* below parameter and function is for G4X Chipset Family*/ + static const intel_limit_t intel_limits_g4x_sdvo = { - .dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX }, - .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, - .n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX }, - .m = { .min = G4X_M_SDVO_MIN, .max = G4X_M_SDVO_MAX }, - .m1 = { .min = G4X_M1_SDVO_MIN, .max = G4X_M1_SDVO_MAX }, - .m2 = { .min = G4X_M2_SDVO_MIN, .max = G4X_M2_SDVO_MAX }, - .p = { .min = G4X_P_SDVO_MIN, .max = G4X_P_SDVO_MAX }, - .p1 = { .min = G4X_P1_SDVO_MIN, .max = G4X_P1_SDVO_MAX}, - .p2 = { .dot_limit = G4X_P2_SDVO_LIMIT, - .p2_slow = G4X_P2_SDVO_SLOW, - .p2_fast = G4X_P2_SDVO_FAST + .dot = { .min = 25000, .max = 270000 }, + .vco = { .min = 1750000, .max = 3500000}, + .n = { .min = 1, .max = 4 }, + .m = { .min = 104, .max = 138 }, + .m1 = { .min = 17, .max = 23 }, + .m2 = { .min = 5, .max = 11 }, + .p = { .min = 10, .max = 30 }, + .p1 = { .min = 1, .max = 3}, + .p2 = { .dot_limit = 270000, + .p2_slow = 10, + .p2_fast = 10 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_hdmi = { - .dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX }, - .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, - .n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX }, - .m = { .min = G4X_M_HDMI_DAC_MIN, .max = G4X_M_HDMI_DAC_MAX }, - .m1 = { .min = G4X_M1_HDMI_DAC_MIN, .max = G4X_M1_HDMI_DAC_MAX }, - .m2 = { .min = G4X_M2_HDMI_DAC_MIN, .max = G4X_M2_HDMI_DAC_MAX }, - .p = { .min = G4X_P_HDMI_DAC_MIN, .max = G4X_P_HDMI_DAC_MAX }, - .p1 = { .min = G4X_P1_HDMI_DAC_MIN, .max = G4X_P1_HDMI_DAC_MAX}, - .p2 = { .dot_limit = G4X_P2_HDMI_DAC_LIMIT, - .p2_slow = G4X_P2_HDMI_DAC_SLOW, - .p2_fast = G4X_P2_HDMI_DAC_FAST - }, + .dot = { .min = 22000, .max = 400000 }, + .vco = { .min = 1750000, .max = 3500000}, + .n = { .min = 1, .max = 4 }, + .m = { .min = 104, .max = 138 }, + .m1 = { .min = 16, .max = 23 }, + .m2 = { .min = 5, .max = 11 }, + .p = { .min = 5, .max = 80 }, + .p1 = { .min = 1, .max = 8}, + .p2 = { .dot_limit = 165000, + .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_single_channel_lvds = { - .dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN, - .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX }, - .vco = { .min = G4X_VCO_MIN, - .max = G4X_VCO_MAX }, - .n = { .min = G4X_N_SINGLE_CHANNEL_LVDS_MIN, - .max = G4X_N_SINGLE_CHANNEL_LVDS_MAX }, - .m = { .min = G4X_M_SINGLE_CHANNEL_LVDS_MIN, - .max = G4X_M_SINGLE_CHANNEL_LVDS_MAX }, - .m1 = { .min = G4X_M1_SINGLE_CHANNEL_LVDS_MIN, - .max = G4X_M1_SINGLE_CHANNEL_LVDS_MAX }, - .m2 = { .min = G4X_M2_SINGLE_CHANNEL_LVDS_MIN, - .max = G4X_M2_SINGLE_CHANNEL_LVDS_MAX }, - .p = { .min = G4X_P_SINGLE_CHANNEL_LVDS_MIN, - .max = G4X_P_SINGLE_CHANNEL_LVDS_MAX }, - .p1 = { .min = G4X_P1_SINGLE_CHANNEL_LVDS_MIN, - .max = G4X_P1_SINGLE_CHANNEL_LVDS_MAX }, - .p2 = { .dot_limit = G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT, - .p2_slow = G4X_P2_SINGLE_CHANNEL_LVDS_SLOW, - .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST + .dot = { .min = 20000, .max = 115000 }, + .vco = { .min = 1750000, .max = 3500000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 104, .max = 138 }, + .m1 = { .min = 17, .max = 23 }, + .m2 = { .min = 5, .max = 11 }, + .p = { .min = 28, .max = 112 }, + .p1 = { .min = 2, .max = 8 }, + .p2 = { .dot_limit = 0, + .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { - .dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN, - .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX }, - .vco = { .min = G4X_VCO_MIN, - .max = G4X_VCO_MAX }, - .n = { .min = G4X_N_DUAL_CHANNEL_LVDS_MIN, - .max = G4X_N_DUAL_CHANNEL_LVDS_MAX }, - .m = { .min = G4X_M_DUAL_CHANNEL_LVDS_MIN, - .max = G4X_M_DUAL_CHANNEL_LVDS_MAX }, - .m1 = { .min = G4X_M1_DUAL_CHANNEL_LVDS_MIN, - .max = G4X_M1_DUAL_CHANNEL_LVDS_MAX }, - .m2 = { .min = G4X_M2_DUAL_CHANNEL_LVDS_MIN, - .max = G4X_M2_DUAL_CHANNEL_LVDS_MAX }, - .p = { .min = G4X_P_DUAL_CHANNEL_LVDS_MIN, - .max = G4X_P_DUAL_CHANNEL_LVDS_MAX }, - .p1 = { .min = G4X_P1_DUAL_CHANNEL_LVDS_MIN, - .max = G4X_P1_DUAL_CHANNEL_LVDS_MAX }, - .p2 = { .dot_limit = G4X_P2_DUAL_CHANNEL_LVDS_LIMIT, - .p2_slow = G4X_P2_DUAL_CHANNEL_LVDS_SLOW, - .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST + .dot = { .min = 80000, .max = 224000 }, + .vco = { .min = 1750000, .max = 3500000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 104, .max = 138 }, + .m1 = { .min = 17, .max = 23 }, + .m2 = { .min = 5, .max = 11 }, + .p = { .min = 14, .max = 42 }, + .p1 = { .min = 2, .max = 6 }, + .p2 = { .dot_limit = 0, + .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_display_port = { - .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN, - .max = G4X_DOT_DISPLAY_PORT_MAX }, - .vco = { .min = G4X_VCO_MIN, - .max = G4X_VCO_MAX}, - .n = { .min = G4X_N_DISPLAY_PORT_MIN, - .max = G4X_N_DISPLAY_PORT_MAX }, - .m = { .min = G4X_M_DISPLAY_PORT_MIN, - .max = G4X_M_DISPLAY_PORT_MAX }, - .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN, - .max = G4X_M1_DISPLAY_PORT_MAX }, - .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN, - .max = G4X_M2_DISPLAY_PORT_MAX }, - .p = { .min = G4X_P_DISPLAY_PORT_MIN, - .max = G4X_P_DISPLAY_PORT_MAX }, - .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN, - .max = G4X_P1_DISPLAY_PORT_MAX}, - .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT, - .p2_slow = G4X_P2_DISPLAY_PORT_SLOW, - .p2_fast = G4X_P2_DISPLAY_PORT_FAST }, + .dot = { .min = 161670, .max = 227000 }, + .vco = { .min = 1750000, .max = 3500000}, + .n = { .min = 1, .max = 2 }, + .m = { .min = 97, .max = 108 }, + .m1 = { .min = 0x10, .max = 0x12 }, + .m2 = { .min = 0x05, .max = 0x06 }, + .p = { .min = 10, .max = 20 }, + .p1 = { .min = 1, .max = 2}, + .p2 = { .dot_limit = 0, + .p2_slow = 10, .p2_fast = 10 }, .find_pll = intel_find_pll_g4x_dp, }; static const intel_limit_t intel_limits_pineview_sdvo = { - .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, - .vco = { .min = PINEVIEW_VCO_MIN, .max = PINEVIEW_VCO_MAX }, - .n = { .min = PINEVIEW_N_MIN, .max = PINEVIEW_N_MAX }, - .m = { .min = PINEVIEW_M_MIN, .max = PINEVIEW_M_MAX }, - .m1 = { .min = PINEVIEW_M1_MIN, .max = PINEVIEW_M1_MAX }, - .m2 = { .min = PINEVIEW_M2_MIN, .max = PINEVIEW_M2_MAX }, - .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, - .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, - .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, - .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, + .dot = { .min = 20000, .max = 400000}, + .vco = { .min = 1700000, .max = 3500000 }, + /* Pineview's Ncounter is a ring counter */ + .n = { .min = 3, .max = 6 }, + .m = { .min = 2, .max = 256 }, + /* Pineview only has one combined m divider, which we treat as m2. */ + .m1 = { .min = 0, .max = 0 }, + .m2 = { .min = 0, .max = 254 }, + .p = { .min = 5, .max = 80 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 200000, + .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_pineview_lvds = { - .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, - .vco = { .min = PINEVIEW_VCO_MIN, .max = PINEVIEW_VCO_MAX }, - .n = { .min = PINEVIEW_N_MIN, .max = PINEVIEW_N_MAX }, - .m = { .min = PINEVIEW_M_MIN, .max = PINEVIEW_M_MAX }, - .m1 = { .min = PINEVIEW_M1_MIN, .max = PINEVIEW_M1_MAX }, - .m2 = { .min = PINEVIEW_M2_MIN, .max = PINEVIEW_M2_MAX }, - .p = { .min = PINEVIEW_P_LVDS_MIN, .max = PINEVIEW_P_LVDS_MAX }, - .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, - /* Pineview only supports single-channel mode. */ - .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, - .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, + .dot = { .min = 20000, .max = 400000 }, + .vco = { .min = 1700000, .max = 3500000 }, + .n = { .min = 3, .max = 6 }, + .m = { .min = 2, .max = 256 }, + .m1 = { .min = 0, .max = 0 }, + .m2 = { .min = 0, .max = 254 }, + .p = { .min = 7, .max = 112 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 112000, + .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_find_best_PLL, }; +/* Ironlake / Sandybridge + * + * We calculate clock using (register_value + 2) for N/M1/M2, so here + * the range value for them is (actual_value - 2). + */ static const intel_limit_t intel_limits_ironlake_dac = { - .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, - .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, - .n = { .min = IRONLAKE_DAC_N_MIN, .max = IRONLAKE_DAC_N_MAX }, - .m = { .min = IRONLAKE_DAC_M_MIN, .max = IRONLAKE_DAC_M_MAX }, - .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, - .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_DAC_P_MIN, .max = IRONLAKE_DAC_P_MAX }, - .p1 = { .min = IRONLAKE_DAC_P1_MIN, .max = IRONLAKE_DAC_P1_MAX }, - .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, - .p2_slow = IRONLAKE_DAC_P2_SLOW, - .p2_fast = IRONLAKE_DAC_P2_FAST }, + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 5 }, + .m = { .min = 79, .max = 127 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 5, .max = 80 }, + .p1 = { .min = 1, .max = 8 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_single_lvds = { - .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, - .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, - .n = { .min = IRONLAKE_LVDS_S_N_MIN, .max = IRONLAKE_LVDS_S_N_MAX }, - .m = { .min = IRONLAKE_LVDS_S_M_MIN, .max = IRONLAKE_LVDS_S_M_MAX }, - .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, - .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_LVDS_S_P_MIN, .max = IRONLAKE_LVDS_S_P_MAX }, - .p1 = { .min = IRONLAKE_LVDS_S_P1_MIN, .max = IRONLAKE_LVDS_S_P1_MAX }, - .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, - .p2_slow = IRONLAKE_LVDS_S_P2_SLOW, - .p2_fast = IRONLAKE_LVDS_S_P2_FAST }, + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 79, .max = 118 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 28, .max = 112 }, + .p1 = { .min = 2, .max = 8 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds = { - .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, - .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, - .n = { .min = IRONLAKE_LVDS_D_N_MIN, .max = IRONLAKE_LVDS_D_N_MAX }, - .m = { .min = IRONLAKE_LVDS_D_M_MIN, .max = IRONLAKE_LVDS_D_M_MAX }, - .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, - .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_LVDS_D_P_MIN, .max = IRONLAKE_LVDS_D_P_MAX }, - .p1 = { .min = IRONLAKE_LVDS_D_P1_MIN, .max = IRONLAKE_LVDS_D_P1_MAX }, - .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, - .p2_slow = IRONLAKE_LVDS_D_P2_SLOW, - .p2_fast = IRONLAKE_LVDS_D_P2_FAST }, + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 79, .max = 127 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 14, .max = 56 }, + .p1 = { .min = 2, .max = 8 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; +/* LVDS 100mhz refclk limits. */ static const intel_limit_t intel_limits_ironlake_single_lvds_100m = { - .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, - .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, - .n = { .min = IRONLAKE_LVDS_S_SSC_N_MIN, .max = IRONLAKE_LVDS_S_SSC_N_MAX }, - .m = { .min = IRONLAKE_LVDS_S_SSC_M_MIN, .max = IRONLAKE_LVDS_S_SSC_M_MAX }, - .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, - .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_LVDS_S_SSC_P_MIN, .max = IRONLAKE_LVDS_S_SSC_P_MAX }, - .p1 = { .min = IRONLAKE_LVDS_S_SSC_P1_MIN,.max = IRONLAKE_LVDS_S_SSC_P1_MAX }, - .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, - .p2_slow = IRONLAKE_LVDS_S_SSC_P2_SLOW, - .p2_fast = IRONLAKE_LVDS_S_SSC_P2_FAST }, + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 2 }, + .m = { .min = 79, .max = 126 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 28, .max = 112 }, + .p1 = { .min = 2,.max = 8 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { - .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, - .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, - .n = { .min = IRONLAKE_LVDS_D_SSC_N_MIN, .max = IRONLAKE_LVDS_D_SSC_N_MAX }, - .m = { .min = IRONLAKE_LVDS_D_SSC_M_MIN, .max = IRONLAKE_LVDS_D_SSC_M_MAX }, - .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, - .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_LVDS_D_SSC_P_MIN, .max = IRONLAKE_LVDS_D_SSC_P_MAX }, - .p1 = { .min = IRONLAKE_LVDS_D_SSC_P1_MIN,.max = IRONLAKE_LVDS_D_SSC_P1_MAX }, - .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, - .p2_slow = IRONLAKE_LVDS_D_SSC_P2_SLOW, - .p2_fast = IRONLAKE_LVDS_D_SSC_P2_FAST }, + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000 }, + .n = { .min = 1, .max = 3 }, + .m = { .min = 79, .max = 126 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 14, .max = 42 }, + .p1 = { .min = 2,.max = 6 }, + .p2 = { .dot_limit = 225000, + .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_display_port = { - .dot = { .min = IRONLAKE_DOT_MIN, - .max = IRONLAKE_DOT_MAX }, - .vco = { .min = IRONLAKE_VCO_MIN, - .max = IRONLAKE_VCO_MAX}, - .n = { .min = IRONLAKE_DP_N_MIN, - .max = IRONLAKE_DP_N_MAX }, - .m = { .min = IRONLAKE_DP_M_MIN, - .max = IRONLAKE_DP_M_MAX }, - .m1 = { .min = IRONLAKE_M1_MIN, - .max = IRONLAKE_M1_MAX }, - .m2 = { .min = IRONLAKE_M2_MIN, - .max = IRONLAKE_M2_MAX }, - .p = { .min = IRONLAKE_DP_P_MIN, - .max = IRONLAKE_DP_P_MAX }, - .p1 = { .min = IRONLAKE_DP_P1_MIN, - .max = IRONLAKE_DP_P1_MAX}, - .p2 = { .dot_limit = IRONLAKE_DP_P2_LIMIT, - .p2_slow = IRONLAKE_DP_P2_SLOW, - .p2_fast = IRONLAKE_DP_P2_FAST }, + .dot = { .min = 25000, .max = 350000 }, + .vco = { .min = 1760000, .max = 3510000}, + .n = { .min = 1, .max = 2 }, + .m = { .min = 81, .max = 90 }, + .m1 = { .min = 12, .max = 22 }, + .m2 = { .min = 5, .max = 9 }, + .p = { .min = 10, .max = 20 }, + .p1 = { .min = 1, .max = 2}, + .p2 = { .dot_limit = 0, + .p2_slow = 10, .p2_fast = 10 }, .find_pll = intel_find_pll_ironlake_dp, }; @@ -1828,7 +1540,7 @@ static void sandybridge_blit_fbc_update(struct drm_device *dev) u32 blt_ecoskpd; /* Make sure blitter notifies FBC of writes */ - __gen6_gt_force_wake_get(dev_priv); + gen6_gt_force_wake_get(dev_priv); blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD); blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY << GEN6_BLITTER_LOCK_SHIFT; @@ -1839,7 +1551,7 @@ static void sandybridge_blit_fbc_update(struct drm_device *dev) GEN6_BLITTER_LOCK_SHIFT); I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); POSTING_READ(GEN6_BLITTER_ECOSKPD); - __gen6_gt_force_wake_put(dev_priv); + gen6_gt_force_wake_put(dev_priv); } static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) @@ -2019,6 +1731,11 @@ static void intel_update_fbc(struct drm_device *dev) intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; + if (!i915_enable_fbc) { + DRM_DEBUG_KMS("fbc disabled per module param (default off)\n"); + dev_priv->no_fbc_reason = FBC_MODULE_PARAM; + goto out_disable; + } if (intel_fb->obj->base.size > dev_priv->cfb_size) { DRM_DEBUG_KMS("framebuffer too large, disabling " "compression\n"); @@ -2339,8 +2056,13 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc) /* enable normal train */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; + if (IS_IVYBRIDGE(dev)) { + temp &= ~FDI_LINK_TRAIN_NONE_IVB; + temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; + } I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); @@ -2357,6 +2079,11 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc) /* wait one idle pattern time */ POSTING_READ(reg); udelay(1000); + + /* IVB wants error correction enabled */ + if (IS_IVYBRIDGE(dev)) + I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE | + FDI_FE_ERRC_ENABLE); } /* The FDI link training functions for ILK/Ibexpeak. */ @@ -2584,7 +2311,116 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) DRM_DEBUG_KMS("FDI train done.\n"); } -static void ironlake_fdi_enable(struct drm_crtc *crtc) +/* Manual link training for Ivy Bridge A0 parts */ +static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 reg, temp, i; + + /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit + for train result */ + reg = FDI_RX_IMR(pipe); + temp = I915_READ(reg); + temp &= ~FDI_RX_SYMBOL_LOCK; + temp &= ~FDI_RX_BIT_LOCK; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(150); + + /* enable CPU FDI TX and PCH FDI RX */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(7 << 19); + temp |= (intel_crtc->fdi_lanes - 1) << 19; + temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB); + temp |= FDI_LINK_TRAIN_PATTERN_1_IVB; + temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; + temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; + I915_WRITE(reg, temp | FDI_TX_ENABLE); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_AUTO; + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + I915_WRITE(reg, temp | FDI_RX_ENABLE); + + POSTING_READ(reg); + udelay(150); + + for (i = 0; i < 4; i++ ) { + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; + temp |= snb_b_fdi_train_param[i]; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(500); + + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); + DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); + + if (temp & FDI_RX_BIT_LOCK || + (I915_READ(reg) & FDI_RX_BIT_LOCK)) { + I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); + DRM_DEBUG_KMS("FDI train 1 done.\n"); + break; + } + } + if (i == 4) + DRM_ERROR("FDI train 1 fail!\n"); + + /* Train 2 */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE_IVB; + temp |= FDI_LINK_TRAIN_PATTERN_2_IVB; + temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; + temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(150); + + for (i = 0; i < 4; i++ ) { + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; + temp |= snb_b_fdi_train_param[i]; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(500); + + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); + DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); + + if (temp & FDI_RX_SYMBOL_LOCK) { + I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); + DRM_DEBUG_KMS("FDI train 2 done.\n"); + break; + } + } + if (i == 4) + DRM_ERROR("FDI train 2 fail!\n"); + + DRM_DEBUG_KMS("FDI train done.\n"); +} + +static void ironlake_fdi_pll_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -2757,10 +2593,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) u32 reg, temp; /* For PCH output, training FDI link */ - if (IS_GEN6(dev)) - gen6_fdi_link_train(crtc); - else - ironlake_fdi_link_train(crtc); + dev_priv->display.fdi_link_train(crtc); intel_enable_pch_pll(dev_priv, pipe); @@ -2850,7 +2683,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) is_pch_port = intel_crtc_driving_pch(crtc); if (is_pch_port) - ironlake_fdi_enable(crtc); + ironlake_fdi_pll_enable(crtc); else ironlake_fdi_disable(crtc); @@ -2873,7 +2706,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) ironlake_pch_enable(crtc); intel_crtc_load_lut(crtc); + + mutex_lock(&dev->struct_mutex); intel_update_fbc(dev); + mutex_unlock(&dev->struct_mutex); + intel_crtc_update_cursor(crtc, true); } @@ -2969,8 +2806,11 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) intel_crtc->active = false; intel_update_watermarks(dev); + + mutex_lock(&dev->struct_mutex); intel_update_fbc(dev); intel_clear_scanline_wait(dev); + mutex_unlock(&dev->struct_mutex); } static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) @@ -3497,11 +3337,11 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz, 1000; entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size); - DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries_required); + DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required); wm_size = fifo_size - (entries_required + wm->guard_size); - DRM_DEBUG_KMS("FIFO watermark level: %d\n", wm_size); + DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size); /* Don't promote wm_size to unsigned... */ if (wm_size > (long)wm->max_wm) @@ -3823,13 +3663,13 @@ static bool g4x_check_srwm(struct drm_device *dev, display_wm, cursor_wm); if (display_wm > display->max_wm) { - DRM_DEBUG_KMS("display watermark is too large(%d), disabling\n", + DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n", display_wm, display->max_wm); return false; } if (cursor_wm > cursor->max_wm) { - DRM_DEBUG_KMS("cursor watermark is too large(%d), disabling\n", + DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n", cursor_wm, cursor->max_wm); return false; } @@ -4516,34 +4356,28 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) return dev_priv->lvds_use_ssc && i915_panel_use_ssc; } -static int intel_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) +static int i9xx_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - u32 fp_reg, dpll_reg; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; - struct intel_encoder *has_edp_encoder = NULL; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; const intel_limit_t *limit; int ret; - struct fdi_m_n m_n = {0}; - u32 reg, temp; + u32 temp; u32 lvds_sync = 0; - int target_clock; - - drm_vblank_pre_modeset(dev, pipe); list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) @@ -4571,9 +4405,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; - case INTEL_OUTPUT_EDP: - has_edp_encoder = encoder; - break; } num_connectors++; @@ -4585,9 +4416,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, refclk / 1000); } else if (!IS_GEN2(dev)) { refclk = 96000; - if (HAS_PCH_SPLIT(dev) && - (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base))) - refclk = 120000; /* 120Mhz refclk */ } else { refclk = 48000; } @@ -4601,7 +4429,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); - drm_vblank_post_modeset(dev, pipe); return -EINVAL; } @@ -4645,143 +4472,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } - /* FDI link */ - if (HAS_PCH_SPLIT(dev)) { - int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); - int lane = 0, link_bw, bpp; - /* CPU eDP doesn't require FDI link, so just set DP M/N - according to current link config */ - if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { - target_clock = mode->clock; - intel_edp_link_config(has_edp_encoder, - &lane, &link_bw); - } else { - /* [e]DP over FDI requires target mode clock - instead of link clock */ - if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) - target_clock = mode->clock; - else - target_clock = adjusted_mode->clock; - - /* FDI is a binary signal running at ~2.7GHz, encoding - * each output octet as 10 bits. The actual frequency - * is stored as a divider into a 100MHz clock, and the - * mode pixel clock is stored in units of 1KHz. - * Hence the bw of each lane in terms of the mode signal - * is: - */ - link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; - } - - /* determine panel color depth */ - temp = I915_READ(PIPECONF(pipe)); - temp &= ~PIPE_BPC_MASK; - if (is_lvds) { - /* the BPC will be 6 if it is 18-bit LVDS panel */ - if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) - temp |= PIPE_8BPC; - else - temp |= PIPE_6BPC; - } else if (has_edp_encoder) { - switch (dev_priv->edp.bpp/3) { - case 8: - temp |= PIPE_8BPC; - break; - case 10: - temp |= PIPE_10BPC; - break; - case 6: - temp |= PIPE_6BPC; - break; - case 12: - temp |= PIPE_12BPC; - break; - } - } else - temp |= PIPE_8BPC; - I915_WRITE(PIPECONF(pipe), temp); - - switch (temp & PIPE_BPC_MASK) { - case PIPE_8BPC: - bpp = 24; - break; - case PIPE_10BPC: - bpp = 30; - break; - case PIPE_6BPC: - bpp = 18; - break; - case PIPE_12BPC: - bpp = 36; - break; - default: - DRM_ERROR("unknown pipe bpc value\n"); - bpp = 24; - } - - if (!lane) { - /* - * Account for spread spectrum to avoid - * oversubscribing the link. Max center spread - * is 2.5%; use 5% for safety's sake. - */ - u32 bps = target_clock * bpp * 21 / 20; - lane = bps / (link_bw * 8) + 1; - } - - intel_crtc->fdi_lanes = lane; - - if (pixel_multiplier > 1) - link_bw *= pixel_multiplier; - ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); - } - - /* Ironlake: try to setup display ref clock before DPLL - * enabling. This is only under driver's control after - * PCH B stepping, previous chipset stepping should be - * ignoring this setting. - */ - if (HAS_PCH_SPLIT(dev)) { - temp = I915_READ(PCH_DREF_CONTROL); - /* Always enable nonspread source */ - temp &= ~DREF_NONSPREAD_SOURCE_MASK; - temp |= DREF_NONSPREAD_SOURCE_ENABLE; - temp &= ~DREF_SSC_SOURCE_MASK; - temp |= DREF_SSC_SOURCE_ENABLE; - I915_WRITE(PCH_DREF_CONTROL, temp); - - POSTING_READ(PCH_DREF_CONTROL); - udelay(200); - - if (has_edp_encoder) { - if (intel_panel_use_ssc(dev_priv)) { - temp |= DREF_SSC1_ENABLE; - I915_WRITE(PCH_DREF_CONTROL, temp); - - POSTING_READ(PCH_DREF_CONTROL); - udelay(200); - } - temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; - - /* Enable CPU source on CPU attached eDP */ - if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) { - if (intel_panel_use_ssc(dev_priv)) - temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; - else - temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; - } else { - /* Enable SSC on PCH eDP if needed */ - if (intel_panel_use_ssc(dev_priv)) { - DRM_ERROR("enabling SSC on PCH\n"); - temp |= DREF_SUPERSPREAD_SOURCE_ENABLE; - } - } - I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); - udelay(200); - } - } - if (IS_PINEVIEW(dev)) { fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) @@ -4794,25 +4484,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, reduced_clock.m2; } - /* Enable autotuning of the PLL clock (if permissible) */ - if (HAS_PCH_SPLIT(dev)) { - int factor = 21; - - if (is_lvds) { - if ((intel_panel_use_ssc(dev_priv) && - dev_priv->lvds_ssc_freq == 100) || - (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) - factor = 25; - } else if (is_sdvo && is_tv) - factor = 20; - - if (clock.m1 < factor * clock.n) - fp |= FP_CB_TUNE; - } - - dpll = 0; - if (!HAS_PCH_SPLIT(dev)) - dpll = DPLL_VGA_MODE_DIS; + dpll = DPLL_VGA_MODE_DIS; if (!IS_GEN2(dev)) { if (is_lvds) @@ -4824,12 +4496,10 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, if (pixel_multiplier > 1) { if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; - else if (HAS_PCH_SPLIT(dev)) - dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } dpll |= DPLL_DVO_HIGH_SPEED; } - if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) + if (is_dp) dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ @@ -4837,9 +4507,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; else { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; - /* also FPA1 */ - if (HAS_PCH_SPLIT(dev)) - dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; if (IS_G4X(dev) && has_reduced_clock) dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; } @@ -4857,7 +4524,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } - if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) + if (INTEL_INFO(dev)->gen >= 4) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { if (is_lvds) { @@ -4891,12 +4558,10 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Ironlake's plane is forced to pipe, bit 24 is to enable color space conversion */ - if (!HAS_PCH_SPLIT(dev)) { - if (pipe == 0) - dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; - else - dspcntr |= DISPPLANE_SEL_PIPE_B; - } + if (pipe == 0) + dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; if (pipe == 0 && INTEL_INFO(dev)->gen < 4) { /* Enable pixel doubling when the dot clock is > 90% of the (display) @@ -4912,27 +4577,506 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DOUBLE_WIDE; } - if (!HAS_PCH_SPLIT(dev)) - dpll |= DPLL_VCO_ENABLE; + dpll |= DPLL_VCO_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); - /* assign to Ironlake registers */ - if (HAS_PCH_SPLIT(dev)) { - fp_reg = PCH_FP0(pipe); - dpll_reg = PCH_DPLL(pipe); + I915_WRITE(FP0(pipe), fp); + I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); + + POSTING_READ(DPLL(pipe)); + udelay(150); + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) { + temp = I915_READ(LVDS); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + if (pipe == 1) { + temp |= LVDS_PIPEB_SELECT; + } else { + temp &= ~LVDS_PIPEB_SELECT; + } + /* set the corresponsding LVDS_BORDER bit */ + temp |= dev_priv->lvds_border_bits; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock.p2 == 7) + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + /* set the dithering flag on LVDS as needed */ + if (INTEL_INFO(dev)->gen >= 4) { + if (dev_priv->lvds_dither) + temp |= LVDS_ENABLE_DITHER; + else + temp &= ~LVDS_ENABLE_DITHER; + } + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) + lvds_sync |= LVDS_HSYNC_POLARITY; + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) + lvds_sync |= LVDS_VSYNC_POLARITY; + if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) + != lvds_sync) { + char flags[2] = "-+"; + DRM_INFO("Changing LVDS panel from " + "(%chsync, %cvsync) to (%chsync, %cvsync)\n", + flags[!(temp & LVDS_HSYNC_POLARITY)], + flags[!(temp & LVDS_VSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + temp |= lvds_sync; + } + I915_WRITE(LVDS, temp); + } + + if (is_dp) { + intel_dp_set_m_n(crtc, mode, adjusted_mode); + } + + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + + if (INTEL_INFO(dev)->gen >= 4) { + temp = 0; + if (is_sdvo) { + temp = intel_mode_get_pixel_multiplier(adjusted_mode); + if (temp > 1) + temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; + else + temp = 0; + } + I915_WRITE(DPLL_MD(pipe), temp); + } else { + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(DPLL(pipe), dpll); + } + + intel_crtc->lowfreq_avail = false; + if (is_lvds && has_reduced_clock && i915_powersave) { + I915_WRITE(FP1(pipe), fp2); + intel_crtc->lowfreq_avail = true; + if (HAS_PIPE_CXSR(dev)) { + DRM_DEBUG_KMS("enabling CxSR downclocking\n"); + pipeconf |= PIPECONF_CXSR_DOWNCLOCK; + } + } else { + I915_WRITE(FP1(pipe), fp); + if (HAS_PIPE_CXSR(dev)) { + DRM_DEBUG_KMS("disabling CxSR downclocking\n"); + pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; + } + } + + if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { + pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; + /* the chip adds 2 halflines automatically */ + adjusted_mode->crtc_vdisplay -= 1; + adjusted_mode->crtc_vtotal -= 1; + adjusted_mode->crtc_vblank_start -= 1; + adjusted_mode->crtc_vblank_end -= 1; + adjusted_mode->crtc_vsync_end -= 1; + adjusted_mode->crtc_vsync_start -= 1; + } else + pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */ + + I915_WRITE(HTOTAL(pipe), + (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + I915_WRITE(HBLANK(pipe), + (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + I915_WRITE(HSYNC(pipe), + (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + + I915_WRITE(VTOTAL(pipe), + (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + I915_WRITE(VBLANK(pipe), + (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + I915_WRITE(VSYNC(pipe), + (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + + /* pipesrc and dspsize control the size that is scaled from, + * which should always be the user's requested size. + */ + I915_WRITE(DSPSIZE(plane), + ((mode->vdisplay - 1) << 16) | + (mode->hdisplay - 1)); + I915_WRITE(DSPPOS(plane), 0); + I915_WRITE(PIPESRC(pipe), + ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + + I915_WRITE(PIPECONF(pipe), pipeconf); + POSTING_READ(PIPECONF(pipe)); + intel_enable_pipe(dev_priv, pipe, false); + + intel_wait_for_vblank(dev, pipe); + + I915_WRITE(DSPCNTR(plane), dspcntr); + POSTING_READ(DSPCNTR(plane)); + + ret = intel_pipe_set_base(crtc, x, y, old_fb); + + intel_update_watermarks(dev); + + return ret; +} + +static int ironlake_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + int refclk, num_connectors = 0; + intel_clock_t clock, reduced_clock; + u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; + bool ok, has_reduced_clock = false, is_sdvo = false; + bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; + struct intel_encoder *has_edp_encoder = NULL; + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *encoder; + const intel_limit_t *limit; + int ret; + struct fdi_m_n m_n = {0}; + u32 temp; + u32 lvds_sync = 0; + int target_clock, pixel_multiplier, lane, link_bw, bpp, factor; + + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { + if (encoder->base.crtc != crtc) + continue; + + switch (encoder->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_SDVO: + case INTEL_OUTPUT_HDMI: + is_sdvo = true; + if (encoder->needs_tv_clock) + is_tv = true; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = true; + break; + case INTEL_OUTPUT_ANALOG: + is_crt = true; + break; + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; + case INTEL_OUTPUT_EDP: + has_edp_encoder = encoder; + break; + } + + num_connectors++; + } + + if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { + refclk = dev_priv->lvds_ssc_freq * 1000; + DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", + refclk / 1000); + } else { + refclk = 96000; + if (!has_edp_encoder || + intel_encoder_is_pch_edp(&has_edp_encoder->base)) + refclk = 120000; /* 120Mhz refclk */ + } + + /* + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. The returned values represent the clock equation: + * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. + */ + limit = intel_limit(crtc, refclk); + ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode!\n"); + return -EINVAL; + } + + /* Ensure that the cursor is valid for the new mode before changing... */ + intel_crtc_update_cursor(crtc, true); + + if (is_lvds && dev_priv->lvds_downclock_avail) { + has_reduced_clock = limit->find_pll(limit, crtc, + dev_priv->lvds_downclock, + refclk, + &reduced_clock); + if (has_reduced_clock && (clock.p != reduced_clock.p)) { + /* + * If the different P is found, it means that we can't + * switch the display clock by using the FP0/FP1. + * In such case we will disable the LVDS downclock + * feature. + */ + DRM_DEBUG_KMS("Different P is found for " + "LVDS clock/downclock\n"); + has_reduced_clock = 0; + } + } + /* SDVO TV has fixed PLL values depend on its clock range, + this mirrors vbios setting. */ + if (is_sdvo && is_tv) { + if (adjusted_mode->clock >= 100000 + && adjusted_mode->clock < 140500) { + clock.p1 = 2; + clock.p2 = 10; + clock.n = 3; + clock.m1 = 16; + clock.m2 = 8; + } else if (adjusted_mode->clock >= 140500 + && adjusted_mode->clock <= 200000) { + clock.p1 = 1; + clock.p2 = 10; + clock.n = 6; + clock.m1 = 12; + clock.m2 = 8; + } + } + + /* FDI link */ + pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); + lane = 0; + /* CPU eDP doesn't require FDI link, so just set DP M/N + according to current link config */ + if (has_edp_encoder && + !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + target_clock = mode->clock; + intel_edp_link_config(has_edp_encoder, + &lane, &link_bw); } else { - fp_reg = FP0(pipe); - dpll_reg = DPLL(pipe); + /* [e]DP over FDI requires target mode clock + instead of link clock */ + if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) + target_clock = mode->clock; + else + target_clock = adjusted_mode->clock; + + /* FDI is a binary signal running at ~2.7GHz, encoding + * each output octet as 10 bits. The actual frequency + * is stored as a divider into a 100MHz clock, and the + * mode pixel clock is stored in units of 1KHz. + * Hence the bw of each lane in terms of the mode signal + * is: + */ + link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; + } + + /* determine panel color depth */ + temp = I915_READ(PIPECONF(pipe)); + temp &= ~PIPE_BPC_MASK; + if (is_lvds) { + /* the BPC will be 6 if it is 18-bit LVDS panel */ + if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + temp |= PIPE_8BPC; + else + temp |= PIPE_6BPC; + } else if (has_edp_encoder) { + switch (dev_priv->edp.bpp/3) { + case 8: + temp |= PIPE_8BPC; + break; + case 10: + temp |= PIPE_10BPC; + break; + case 6: + temp |= PIPE_6BPC; + break; + case 12: + temp |= PIPE_12BPC; + break; + } + } else + temp |= PIPE_8BPC; + I915_WRITE(PIPECONF(pipe), temp); + + switch (temp & PIPE_BPC_MASK) { + case PIPE_8BPC: + bpp = 24; + break; + case PIPE_10BPC: + bpp = 30; + break; + case PIPE_6BPC: + bpp = 18; + break; + case PIPE_12BPC: + bpp = 36; + break; + default: + DRM_ERROR("unknown pipe bpc value\n"); + bpp = 24; + } + + if (!lane) { + /* + * Account for spread spectrum to avoid + * oversubscribing the link. Max center spread + * is 2.5%; use 5% for safety's sake. + */ + u32 bps = target_clock * bpp * 21 / 20; + lane = bps / (link_bw * 8) + 1; } + intel_crtc->fdi_lanes = lane; + + if (pixel_multiplier > 1) + link_bw *= pixel_multiplier; + ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); + + /* Ironlake: try to setup display ref clock before DPLL + * enabling. This is only under driver's control after + * PCH B stepping, previous chipset stepping should be + * ignoring this setting. + */ + temp = I915_READ(PCH_DREF_CONTROL); + /* Always enable nonspread source */ + temp &= ~DREF_NONSPREAD_SOURCE_MASK; + temp |= DREF_NONSPREAD_SOURCE_ENABLE; + temp &= ~DREF_SSC_SOURCE_MASK; + temp |= DREF_SSC_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + + POSTING_READ(PCH_DREF_CONTROL); + udelay(200); + + if (has_edp_encoder) { + if (intel_panel_use_ssc(dev_priv)) { + temp |= DREF_SSC1_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + + POSTING_READ(PCH_DREF_CONTROL); + udelay(200); + } + temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + + /* Enable CPU source on CPU attached eDP */ + if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + if (intel_panel_use_ssc(dev_priv)) + temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; + else + temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; + } else { + /* Enable SSC on PCH eDP if needed */ + if (intel_panel_use_ssc(dev_priv)) { + DRM_ERROR("enabling SSC on PCH\n"); + temp |= DREF_SUPERSPREAD_SOURCE_ENABLE; + } + } + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + udelay(200); + } + + fp = clock.n << 16 | clock.m1 << 8 | clock.m2; + if (has_reduced_clock) + fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | + reduced_clock.m2; + + /* Enable autotuning of the PLL clock (if permissible) */ + factor = 21; + if (is_lvds) { + if ((intel_panel_use_ssc(dev_priv) && + dev_priv->lvds_ssc_freq == 100) || + (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) + factor = 25; + } else if (is_sdvo && is_tv) + factor = 20; + + if (clock.m1 < factor * clock.n) + fp |= FP_CB_TUNE; + + dpll = 0; + + if (is_lvds) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + if (is_sdvo) { + int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); + if (pixel_multiplier > 1) { + dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; + } + dpll |= DPLL_DVO_HIGH_SPEED; + } + if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) + dpll |= DPLL_DVO_HIGH_SPEED; + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + /* also FPA1 */ + dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; + + switch (clock.p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + + if (is_sdvo && is_tv) + dpll |= PLL_REF_INPUT_TVCLKINBC; + else if (is_tv) + /* XXX: just matching BIOS for now */ + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + else + dpll |= PLL_REF_INPUT_DREFCLK; + + /* setup pipeconf */ + pipeconf = I915_READ(PIPECONF(pipe)); + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + drm_mode_debug_printmodeline(mode); + /* PCH eDP needs FDI, but CPU eDP does not */ if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { - I915_WRITE(fp_reg, fp); - I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); + I915_WRITE(PCH_FP0(pipe), fp); + I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); - POSTING_READ(dpll_reg); + POSTING_READ(PCH_DPLL(pipe)); udelay(150); } @@ -4964,11 +5108,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * things on. */ if (is_lvds) { - reg = LVDS; - if (HAS_PCH_SPLIT(dev)) - reg = PCH_LVDS; - - temp = I915_READ(reg); + temp = I915_READ(PCH_LVDS); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; if (pipe == 1) { if (HAS_PCH_CPT(dev)) @@ -4995,13 +5135,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ - /* set the dithering flag on non-PCH LVDS as needed */ - if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { - if (dev_priv->lvds_dither) - temp |= LVDS_ENABLE_DITHER; - else - temp &= ~LVDS_ENABLE_DITHER; - } if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) lvds_sync |= LVDS_HSYNC_POLARITY; if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) @@ -5018,22 +5151,20 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); temp |= lvds_sync; } - I915_WRITE(reg, temp); + I915_WRITE(PCH_LVDS, temp); } /* set the dithering flag and clear for anything other than a panel. */ - if (HAS_PCH_SPLIT(dev)) { - pipeconf &= ~PIPECONF_DITHER_EN; - pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; - if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) { - pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_ST1; - } + pipeconf &= ~PIPECONF_DITHER_EN; + pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; + if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) { + pipeconf |= PIPECONF_DITHER_EN; + pipeconf |= PIPECONF_DITHER_TYPE_ST1; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); - } else if (HAS_PCH_SPLIT(dev)) { + } else { /* For non-DP output, clear any trans DP clock recovery setting.*/ I915_WRITE(TRANSDATA_M1(pipe), 0); I915_WRITE(TRANSDATA_N1(pipe), 0); @@ -5041,43 +5172,32 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(TRANSDPLINK_N1(pipe), 0); } - if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { - I915_WRITE(dpll_reg, dpll); + if (!has_edp_encoder || + intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + I915_WRITE(PCH_DPLL(pipe), dpll); /* Wait for the clocks to stabilize. */ - POSTING_READ(dpll_reg); + POSTING_READ(PCH_DPLL(pipe)); udelay(150); - if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { - temp = 0; - if (is_sdvo) { - temp = intel_mode_get_pixel_multiplier(adjusted_mode); - if (temp > 1) - temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; - else - temp = 0; - } - I915_WRITE(DPLL_MD(pipe), temp); - } else { - /* The pixel multiplier can only be updated once the - * DPLL is enabled and the clocks are stable. - * - * So write it again. - */ - I915_WRITE(dpll_reg, dpll); - } + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(PCH_DPLL(pipe), dpll); } intel_crtc->lowfreq_avail = false; if (is_lvds && has_reduced_clock && i915_powersave) { - I915_WRITE(fp_reg + 4, fp2); + I915_WRITE(PCH_FP1(pipe), fp2); intel_crtc->lowfreq_avail = true; if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("enabling CxSR downclocking\n"); pipeconf |= PIPECONF_CXSR_DOWNCLOCK; } } else { - I915_WRITE(fp_reg + 4, fp); + I915_WRITE(PCH_FP1(pipe), fp); if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; @@ -5116,33 +5236,24 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); - /* pipesrc and dspsize control the size that is scaled from, - * which should always be the user's requested size. + /* pipesrc controls the size that is scaled from, which should + * always be the user's requested size. */ - if (!HAS_PCH_SPLIT(dev)) { - I915_WRITE(DSPSIZE(plane), - ((mode->vdisplay - 1) << 16) | - (mode->hdisplay - 1)); - I915_WRITE(DSPPOS(plane), 0); - } I915_WRITE(PIPESRC(pipe), ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); - if (HAS_PCH_SPLIT(dev)) { - I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); - I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); - I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); - I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); + I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); + I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); + I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); + I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); - if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { - ironlake_set_pll_edp(crtc, adjusted_mode->clock); - } + if (has_edp_encoder && + !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + ironlake_set_pll_edp(crtc, adjusted_mode->clock); } I915_WRITE(PIPECONF(pipe), pipeconf); POSTING_READ(PIPECONF(pipe)); - if (!HAS_PCH_SPLIT(dev)) - intel_enable_pipe(dev_priv, pipe, false); intel_wait_for_vblank(dev, pipe); @@ -5161,6 +5272,26 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_update_watermarks(dev); + return ret; +} + +static int intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int ret; + + drm_vblank_pre_modeset(dev, pipe); + + ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode, + x, y, old_fb); + drm_vblank_post_modeset(dev, pipe); return ret; @@ -5483,43 +5614,140 @@ static struct drm_display_mode load_detect_mode = { 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), }; -struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, - struct drm_connector *connector, - struct drm_display_mode *mode, - int *dpms_mode) +static struct drm_framebuffer * +intel_framebuffer_create(struct drm_device *dev, + struct drm_mode_fb_cmd *mode_cmd, + struct drm_i915_gem_object *obj) +{ + struct intel_framebuffer *intel_fb; + int ret; + + intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); + if (!intel_fb) { + drm_gem_object_unreference_unlocked(&obj->base); + return ERR_PTR(-ENOMEM); + } + + ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj); + if (ret) { + drm_gem_object_unreference_unlocked(&obj->base); + kfree(intel_fb); + return ERR_PTR(ret); + } + + return &intel_fb->base; +} + +static u32 +intel_framebuffer_pitch_for_width(int width, int bpp) +{ + u32 pitch = DIV_ROUND_UP(width * bpp, 8); + return ALIGN(pitch, 64); +} + +static u32 +intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp) +{ + u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp); + return ALIGN(pitch * mode->vdisplay, PAGE_SIZE); +} + +static struct drm_framebuffer * +intel_framebuffer_create_for_mode(struct drm_device *dev, + struct drm_display_mode *mode, + int depth, int bpp) +{ + struct drm_i915_gem_object *obj; + struct drm_mode_fb_cmd mode_cmd; + + obj = i915_gem_alloc_object(dev, + intel_framebuffer_size_for_mode(mode, bpp)); + if (obj == NULL) + return ERR_PTR(-ENOMEM); + + mode_cmd.width = mode->hdisplay; + mode_cmd.height = mode->vdisplay; + mode_cmd.depth = depth; + mode_cmd.bpp = bpp; + mode_cmd.pitch = intel_framebuffer_pitch_for_width(mode_cmd.width, bpp); + + return intel_framebuffer_create(dev, &mode_cmd, obj); +} + +static struct drm_framebuffer * +mode_fits_in_fbdev(struct drm_device *dev, + struct drm_display_mode *mode) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj; + struct drm_framebuffer *fb; + + if (dev_priv->fbdev == NULL) + return NULL; + + obj = dev_priv->fbdev->ifb.obj; + if (obj == NULL) + return NULL; + + fb = &dev_priv->fbdev->ifb.base; + if (fb->pitch < intel_framebuffer_pitch_for_width(mode->hdisplay, + fb->bits_per_pixel)) + return NULL; + + if (obj->base.size < mode->vdisplay * fb->pitch) + return NULL; + + return fb; +} + +bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, + struct drm_connector *connector, + struct drm_display_mode *mode, + struct intel_load_detect_pipe *old) { struct intel_crtc *intel_crtc; struct drm_crtc *possible_crtc; - struct drm_crtc *supported_crtc =NULL; struct drm_encoder *encoder = &intel_encoder->base; struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; - struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; - struct drm_crtc_helper_funcs *crtc_funcs; + struct drm_framebuffer *old_fb; int i = -1; + DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", + connector->base.id, drm_get_connector_name(connector), + encoder->base.id, drm_get_encoder_name(encoder)); + /* * Algorithm gets a little messy: + * * - if the connector already has an assigned crtc, use it (but make * sure it's on first) + * * - try to find the first unused crtc that can drive this connector, * and use that if we find one - * - if there are no unused crtcs available, try to use the first - * one we found that supports the connector */ /* See if we already have a CRTC for this connector */ if (encoder->crtc) { crtc = encoder->crtc; - /* Make sure the crtc and connector are running */ + intel_crtc = to_intel_crtc(crtc); - *dpms_mode = intel_crtc->dpms_mode; + old->dpms_mode = intel_crtc->dpms_mode; + old->load_detect_temp = false; + + /* Make sure the crtc and connector are running */ if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_crtc_helper_funcs *crtc_funcs; + crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); + + encoder_funcs = encoder->helper_private; encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } - return crtc; + + return true; } /* Find an unused one (if possible) */ @@ -5531,46 +5759,66 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, crtc = possible_crtc; break; } - if (!supported_crtc) - supported_crtc = possible_crtc; } /* * If we didn't find an unused CRTC, don't use any. */ if (!crtc) { - return NULL; + DRM_DEBUG_KMS("no pipe available for load-detect\n"); + return false; } encoder->crtc = crtc; connector->encoder = encoder; - intel_encoder->load_detect_temp = true; intel_crtc = to_intel_crtc(crtc); - *dpms_mode = intel_crtc->dpms_mode; + old->dpms_mode = intel_crtc->dpms_mode; + old->load_detect_temp = true; + old->release_fb = NULL; - if (!crtc->enabled) { - if (!mode) - mode = &load_detect_mode; - drm_crtc_helper_set_mode(crtc, mode, 0, 0, crtc->fb); - } else { - if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { - crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); - } + if (!mode) + mode = &load_detect_mode; - /* Add this connector to the crtc */ - encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode); - encoder_funcs->commit(encoder); + old_fb = crtc->fb; + + /* We need a framebuffer large enough to accommodate all accesses + * that the plane may generate whilst we perform load detection. + * We can not rely on the fbcon either being present (we get called + * during its initialisation to detect all boot displays, or it may + * not even exist) or that it is large enough to satisfy the + * requested mode. + */ + crtc->fb = mode_fits_in_fbdev(dev, mode); + if (crtc->fb == NULL) { + DRM_DEBUG_KMS("creating tmp fb for load-detection\n"); + crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32); + old->release_fb = crtc->fb; + } else + DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n"); + if (IS_ERR(crtc->fb)) { + DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n"); + crtc->fb = old_fb; + return false; + } + + if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) { + DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n"); + if (old->release_fb) + old->release_fb->funcs->destroy(old->release_fb); + crtc->fb = old_fb; + return false; } + /* let the connector get through one full cycle before testing */ intel_wait_for_vblank(dev, intel_crtc->pipe); - return crtc; + return true; } void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, - struct drm_connector *connector, int dpms_mode) + struct drm_connector *connector, + struct intel_load_detect_pipe *old) { struct drm_encoder *encoder = &intel_encoder->base; struct drm_device *dev = encoder->dev; @@ -5578,19 +5826,24 @@ void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - if (intel_encoder->load_detect_temp) { - encoder->crtc = NULL; + DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", + connector->base.id, drm_get_connector_name(connector), + encoder->base.id, drm_get_encoder_name(encoder)); + + if (old->load_detect_temp) { connector->encoder = NULL; - intel_encoder->load_detect_temp = false; - crtc->enabled = drm_helper_crtc_in_use(crtc); drm_helper_disable_unused_functions(dev); + + if (old->release_fb) + old->release_fb->funcs->destroy(old->release_fb); + + return; } /* Switch crtc and encoder back off if necessary */ - if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) { - if (encoder->crtc == crtc) - encoder_funcs->dpms(encoder, dpms_mode); - crtc_funcs->dpms(crtc, dpms_mode); + if (old->dpms_mode != DRM_MODE_DPMS_ON) { + encoder_funcs->dpms(encoder, old->dpms_mode); + crtc_funcs->dpms(crtc, old->dpms_mode); } } @@ -6185,6 +6438,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, break; case 6: + case 7: OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch | obj->tiling_mode); @@ -6504,6 +6758,9 @@ static void intel_setup_outputs(struct drm_device *dev) } intel_panel_setup_backlight(dev); + + /* disable all the possible outputs/crtcs before entering KMS mode */ + drm_helper_disable_unused_functions(dev); } static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) @@ -6571,27 +6828,12 @@ intel_user_framebuffer_create(struct drm_device *dev, struct drm_mode_fb_cmd *mode_cmd) { struct drm_i915_gem_object *obj; - struct intel_framebuffer *intel_fb; - int ret; obj = to_intel_bo(drm_gem_object_lookup(dev, filp, mode_cmd->handle)); if (&obj->base == NULL) return ERR_PTR(-ENOENT); - intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); - if (!intel_fb) { - drm_gem_object_unreference_unlocked(&obj->base); - return ERR_PTR(-ENOMEM); - } - - ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj); - if (ret) { - drm_gem_object_unreference_unlocked(&obj->base); - kfree(intel_fb); - return ERR_PTR(ret); - } - - return &intel_fb->base; + return intel_framebuffer_create(dev, mode_cmd, obj); } static const struct drm_mode_config_funcs intel_mode_funcs = { @@ -6605,13 +6847,14 @@ intel_alloc_context_page(struct drm_device *dev) struct drm_i915_gem_object *ctx; int ret; + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + ctx = i915_gem_alloc_object(dev, 4096); if (!ctx) { DRM_DEBUG("failed to alloc power context, RC6 disabled\n"); return NULL; } - mutex_lock(&dev->struct_mutex); ret = i915_gem_object_pin(ctx, 4096, true); if (ret) { DRM_ERROR("failed to pin power context: %d\n", ret); @@ -6623,7 +6866,6 @@ intel_alloc_context_page(struct drm_device *dev) DRM_ERROR("failed to set-domain on power context: %d\n", ret); goto err_unpin; } - mutex_unlock(&dev->struct_mutex); return ctx; @@ -6758,6 +7000,11 @@ void gen6_disable_rps(struct drm_device *dev) I915_WRITE(GEN6_RPNSWREQ, 1 << 31); I915_WRITE(GEN6_PMINTRMSK, 0xffffffff); I915_WRITE(GEN6_PMIER, 0); + + spin_lock_irq(&dev_priv->rps_lock); + dev_priv->pm_iir = 0; + spin_unlock_irq(&dev_priv->rps_lock); + I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR)); } @@ -6851,7 +7098,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) { u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); - u32 pcu_mbox; + u32 pcu_mbox, rc6_mask = 0; int cur_freq, min_freq, max_freq; int i; @@ -6862,7 +7109,8 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) * userspace... */ I915_WRITE(GEN6_RC_STATE, 0); - __gen6_gt_force_wake_get(dev_priv); + mutex_lock(&dev_priv->dev->struct_mutex); + gen6_gt_force_wake_get(dev_priv); /* disable the counters and set deterministic thresholds */ I915_WRITE(GEN6_RC_CONTROL, 0); @@ -6882,9 +7130,12 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6p_THRESHOLD, 100000); I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ + if (i915_enable_rc6) + rc6_mask = GEN6_RC_CTL_RC6p_ENABLE | + GEN6_RC_CTL_RC6_ENABLE; + I915_WRITE(GEN6_RC_CONTROL, - GEN6_RC_CTL_RC6p_ENABLE | - GEN6_RC_CTL_RC6_ENABLE | + rc6_mask | GEN6_RC_CTL_EI_MODE(1) | GEN6_RC_CTL_HW_ENABLE); @@ -6956,168 +7207,237 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_DOWN_EI_EXPIRED); + spin_lock_irq(&dev_priv->rps_lock); + WARN_ON(dev_priv->pm_iir != 0); I915_WRITE(GEN6_PMIMR, 0); + spin_unlock_irq(&dev_priv->rps_lock); /* enable all PM interrupts */ I915_WRITE(GEN6_PMINTRMSK, 0); - __gen6_gt_force_wake_put(dev_priv); + gen6_gt_force_wake_put(dev_priv); + mutex_unlock(&dev_priv->dev->struct_mutex); } -void intel_enable_clock_gating(struct drm_device *dev) +static void ironlake_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; + + /* Required for FBC */ + dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE | + DPFCRUNIT_CLOCK_GATE_DISABLE | + DPFDUNIT_CLOCK_GATE_DISABLE; + /* Required for CxSR */ + dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE; + + I915_WRITE(PCH_3DCGDIS0, + MARIUNIT_CLOCK_GATE_DISABLE | + SVSMUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(PCH_3DCGDIS1, + VFMUNIT_CLOCK_GATE_DISABLE); + + I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); + + /* + * According to the spec the following bits should be set in + * order to enable memory self-refresh + * The bit 22/21 of 0x42004 + * The bit 5 of 0x42020 + * The bit 15 of 0x45000 + */ + I915_WRITE(ILK_DISPLAY_CHICKEN2, + (I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE | ILK_VSDPFD_FULL)); + I915_WRITE(ILK_DSPCLK_GATE, + (I915_READ(ILK_DSPCLK_GATE) | + ILK_DPARB_CLK_GATE)); + I915_WRITE(DISP_ARB_CTL, + (I915_READ(DISP_ARB_CTL) | + DISP_FBC_WM_DIS)); + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); + + /* + * Based on the document from hardware guys the following bits + * should be set unconditionally in order to enable FBC. + * The bit 22 of 0x42000 + * The bit 22 of 0x42004 + * The bit 7,8,9 of 0x42020. + */ + if (IS_IRONLAKE_M(dev)) { + I915_WRITE(ILK_DISPLAY_CHICKEN1, + I915_READ(ILK_DISPLAY_CHICKEN1) | + ILK_FBCQ_DIS); + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE); + I915_WRITE(ILK_DSPCLK_GATE, + I915_READ(ILK_DSPCLK_GATE) | + ILK_DPFC_DIS1 | + ILK_DPFC_DIS2 | + ILK_CLK_FBC); + } + + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_ELPIN_409_SELECT); + I915_WRITE(_3D_CHICKEN2, + _3D_CHICKEN2_WM_READ_PIPELINED << 16 | + _3D_CHICKEN2_WM_READ_PIPELINED); +} + +static void gen6_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int pipe; + uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; + + I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); + + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_ELPIN_409_SELECT); + + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); /* - * Disable clock gating reported to work incorrectly according to the - * specs, but enable as much else as we can. + * According to the spec the following bits should be + * set in order to enable memory self-refresh and fbc: + * The bit21 and bit22 of 0x42000 + * The bit21 and bit22 of 0x42004 + * The bit5 and bit7 of 0x42020 + * The bit14 of 0x70180 + * The bit14 of 0x71180 */ - if (HAS_PCH_SPLIT(dev)) { - uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(ILK_DISPLAY_CHICKEN1, + I915_READ(ILK_DISPLAY_CHICKEN1) | + ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS); + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE | ILK_VSDPFD_FULL); + I915_WRITE(ILK_DSPCLK_GATE, + I915_READ(ILK_DSPCLK_GATE) | + ILK_DPARB_CLK_GATE | + ILK_DPFD_CLK_GATE); - if (IS_GEN5(dev)) { - /* Required for FBC */ - dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE | - DPFCRUNIT_CLOCK_GATE_DISABLE | - DPFDUNIT_CLOCK_GATE_DISABLE; - /* Required for CxSR */ - dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE; - - I915_WRITE(PCH_3DCGDIS0, - MARIUNIT_CLOCK_GATE_DISABLE | - SVSMUNIT_CLOCK_GATE_DISABLE); - I915_WRITE(PCH_3DCGDIS1, - VFMUNIT_CLOCK_GATE_DISABLE); - } + for_each_pipe(pipe) + I915_WRITE(DSPCNTR(pipe), + I915_READ(DSPCNTR(pipe)) | + DISPPLANE_TRICKLE_FEED_DISABLE); +} - I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); +static void ivybridge_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe; + uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; - /* - * On Ibex Peak and Cougar Point, we need to disable clock - * gating for the panel power sequencer or it will fail to - * start up when no ports are active. - */ - I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); - /* - * According to the spec the following bits should be set in - * order to enable memory self-refresh - * The bit 22/21 of 0x42004 - * The bit 5 of 0x42020 - * The bit 15 of 0x45000 - */ - if (IS_GEN5(dev)) { - I915_WRITE(ILK_DISPLAY_CHICKEN2, - (I915_READ(ILK_DISPLAY_CHICKEN2) | - ILK_DPARB_GATE | ILK_VSDPFD_FULL)); - I915_WRITE(ILK_DSPCLK_GATE, - (I915_READ(ILK_DSPCLK_GATE) | - ILK_DPARB_CLK_GATE)); - I915_WRITE(DISP_ARB_CTL, - (I915_READ(DISP_ARB_CTL) | - DISP_FBC_WM_DIS)); - I915_WRITE(WM3_LP_ILK, 0); - I915_WRITE(WM2_LP_ILK, 0); - I915_WRITE(WM1_LP_ILK, 0); - } - /* - * Based on the document from hardware guys the following bits - * should be set unconditionally in order to enable FBC. - * The bit 22 of 0x42000 - * The bit 22 of 0x42004 - * The bit 7,8,9 of 0x42020. - */ - if (IS_IRONLAKE_M(dev)) { - I915_WRITE(ILK_DISPLAY_CHICKEN1, - I915_READ(ILK_DISPLAY_CHICKEN1) | - ILK_FBCQ_DIS); - I915_WRITE(ILK_DISPLAY_CHICKEN2, - I915_READ(ILK_DISPLAY_CHICKEN2) | - ILK_DPARB_GATE); - I915_WRITE(ILK_DSPCLK_GATE, - I915_READ(ILK_DSPCLK_GATE) | - ILK_DPFC_DIS1 | - ILK_DPFC_DIS2 | - ILK_CLK_FBC); - } + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); - I915_WRITE(ILK_DISPLAY_CHICKEN2, - I915_READ(ILK_DISPLAY_CHICKEN2) | - ILK_ELPIN_409_SELECT); + I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE); - if (IS_GEN5(dev)) { - I915_WRITE(_3D_CHICKEN2, - _3D_CHICKEN2_WM_READ_PIPELINED << 16 | - _3D_CHICKEN2_WM_READ_PIPELINED); - } + for_each_pipe(pipe) + I915_WRITE(DSPCNTR(pipe), + I915_READ(DSPCNTR(pipe)) | + DISPPLANE_TRICKLE_FEED_DISABLE); +} - if (IS_GEN6(dev)) { - I915_WRITE(WM3_LP_ILK, 0); - I915_WRITE(WM2_LP_ILK, 0); - I915_WRITE(WM1_LP_ILK, 0); +static void g4x_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dspclk_gate; - /* - * According to the spec the following bits should be - * set in order to enable memory self-refresh and fbc: - * The bit21 and bit22 of 0x42000 - * The bit21 and bit22 of 0x42004 - * The bit5 and bit7 of 0x42020 - * The bit14 of 0x70180 - * The bit14 of 0x71180 - */ - I915_WRITE(ILK_DISPLAY_CHICKEN1, - I915_READ(ILK_DISPLAY_CHICKEN1) | - ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS); - I915_WRITE(ILK_DISPLAY_CHICKEN2, - I915_READ(ILK_DISPLAY_CHICKEN2) | - ILK_DPARB_GATE | ILK_VSDPFD_FULL); - I915_WRITE(ILK_DSPCLK_GATE, - I915_READ(ILK_DSPCLK_GATE) | - ILK_DPARB_CLK_GATE | - ILK_DPFD_CLK_GATE); - - for_each_pipe(pipe) - I915_WRITE(DSPCNTR(pipe), - I915_READ(DSPCNTR(pipe)) | - DISPPLANE_TRICKLE_FEED_DISABLE); - } - } else if (IS_G4X(dev)) { - uint32_t dspclk_gate; - I915_WRITE(RENCLK_GATE_D1, 0); - I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | - GS_UNIT_CLOCK_GATE_DISABLE | - CL_UNIT_CLOCK_GATE_DISABLE); - I915_WRITE(RAMCLK_GATE_D, 0); - dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | - OVRUNIT_CLOCK_GATE_DISABLE | - OVCUNIT_CLOCK_GATE_DISABLE; - if (IS_GM45(dev)) - dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; - I915_WRITE(DSPCLK_GATE_D, dspclk_gate); - } else if (IS_CRESTLINE(dev)) { - I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); - I915_WRITE(RENCLK_GATE_D2, 0); - I915_WRITE(DSPCLK_GATE_D, 0); - I915_WRITE(RAMCLK_GATE_D, 0); - I915_WRITE16(DEUC, 0); - } else if (IS_BROADWATER(dev)) { - I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | - I965_RCC_CLOCK_GATE_DISABLE | - I965_RCPB_CLOCK_GATE_DISABLE | - I965_ISC_CLOCK_GATE_DISABLE | - I965_FBC_CLOCK_GATE_DISABLE); - I915_WRITE(RENCLK_GATE_D2, 0); - } else if (IS_GEN3(dev)) { - u32 dstate = I915_READ(D_STATE); + I915_WRITE(RENCLK_GATE_D1, 0); + I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | + GS_UNIT_CLOCK_GATE_DISABLE | + CL_UNIT_CLOCK_GATE_DISABLE); + I915_WRITE(RAMCLK_GATE_D, 0); + dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | + OVRUNIT_CLOCK_GATE_DISABLE | + OVCUNIT_CLOCK_GATE_DISABLE; + if (IS_GM45(dev)) + dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, dspclk_gate); +} - dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | - DSTATE_DOT_CLOCK_GATING; - I915_WRITE(D_STATE, dstate); - } else if (IS_I85X(dev) || IS_I865G(dev)) { - I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); - } else if (IS_I830(dev)) { - I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); - } +static void crestline_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); + I915_WRITE(RENCLK_GATE_D2, 0); + I915_WRITE(DSPCLK_GATE_D, 0); + I915_WRITE(RAMCLK_GATE_D, 0); + I915_WRITE16(DEUC, 0); +} + +static void broadwater_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | + I965_RCC_CLOCK_GATE_DISABLE | + I965_RCPB_CLOCK_GATE_DISABLE | + I965_ISC_CLOCK_GATE_DISABLE | + I965_FBC_CLOCK_GATE_DISABLE); + I915_WRITE(RENCLK_GATE_D2, 0); +} + +static void gen3_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 dstate = I915_READ(D_STATE); + + dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | + DSTATE_DOT_CLOCK_GATING; + I915_WRITE(D_STATE, dstate); +} + +static void i85x_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); +} + +static void i830_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); +} + +static void ibx_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* + * On Ibex Peak and Cougar Point, we need to disable clock + * gating for the panel power sequencer or it will fail to + * start up when no ports are active. + */ + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); +} + +static void cpt_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* + * On Ibex Peak and Cougar Point, we need to disable clock + * gating for the panel power sequencer or it will fail to + * start up when no ports are active. + */ + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) | + DPLS_EDP_PPS_FIX_DIS); } static void ironlake_teardown_rc6(struct drm_device *dev) @@ -7187,9 +7507,12 @@ void ironlake_enable_rc6(struct drm_device *dev) if (!i915_enable_rc6) return; + mutex_lock(&dev->struct_mutex); ret = ironlake_setup_rc6(dev); - if (ret) + if (ret) { + mutex_unlock(&dev->struct_mutex); return; + } /* * GPU can automatically power down the render unit if given a page @@ -7198,6 +7521,7 @@ void ironlake_enable_rc6(struct drm_device *dev) ret = BEGIN_LP_RING(6); if (ret) { ironlake_teardown_rc6(dev); + mutex_unlock(&dev->struct_mutex); return; } @@ -7213,10 +7537,33 @@ void ironlake_enable_rc6(struct drm_device *dev) OUT_RING(MI_FLUSH); ADVANCE_LP_RING(); + /* + * Wait for the command parser to advance past MI_SET_CONTEXT. The HW + * does an implicit flush, combined with MI_FLUSH above, it should be + * safe to assume that renderctx is valid + */ + ret = intel_wait_ring_idle(LP_RING(dev_priv)); + if (ret) { + DRM_ERROR("failed to enable ironlake power power savings\n"); + ironlake_teardown_rc6(dev); + mutex_unlock(&dev->struct_mutex); + return; + } + I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN); I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT); + mutex_unlock(&dev->struct_mutex); } +void intel_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->display.init_clock_gating(dev); + + if (dev_priv->display.init_pch_clock_gating) + dev_priv->display.init_pch_clock_gating(dev); +} /* Set up chip specific display functions */ static void intel_init_display(struct drm_device *dev) @@ -7224,10 +7571,13 @@ static void intel_init_display(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; /* We always want a DPMS function */ - if (HAS_PCH_SPLIT(dev)) + if (HAS_PCH_SPLIT(dev)) { dev_priv->display.dpms = ironlake_crtc_dpms; - else + dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; + } else { dev_priv->display.dpms = i9xx_crtc_dpms; + dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; + } if (I915_HAS_FBC(dev)) { if (HAS_PCH_SPLIT(dev)) { @@ -7271,6 +7621,11 @@ static void intel_init_display(struct drm_device *dev) /* For FIFO watermark updates */ if (HAS_PCH_SPLIT(dev)) { + if (HAS_PCH_IBX(dev)) + dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating; + else if (HAS_PCH_CPT(dev)) + dev_priv->display.init_pch_clock_gating = cpt_init_clock_gating; + if (IS_GEN5(dev)) { if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK) dev_priv->display.update_wm = ironlake_update_wm; @@ -7279,6 +7634,8 @@ static void intel_init_display(struct drm_device *dev) "Disable CxSR\n"); dev_priv->display.update_wm = NULL; } + dev_priv->display.fdi_link_train = ironlake_fdi_link_train; + dev_priv->display.init_clock_gating = ironlake_init_clock_gating; } else if (IS_GEN6(dev)) { if (SNB_READ_WM0_LATENCY()) { dev_priv->display.update_wm = sandybridge_update_wm; @@ -7287,6 +7644,20 @@ static void intel_init_display(struct drm_device *dev) "Disable CxSR\n"); dev_priv->display.update_wm = NULL; } + dev_priv->display.fdi_link_train = gen6_fdi_link_train; + dev_priv->display.init_clock_gating = gen6_init_clock_gating; + } else if (IS_IVYBRIDGE(dev)) { + /* FIXME: detect B0+ stepping and use auto training */ + dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; + if (SNB_READ_WM0_LATENCY()) { + dev_priv->display.update_wm = sandybridge_update_wm; + } else { + DRM_DEBUG_KMS("Failed to read display plane latency. " + "Disable CxSR\n"); + dev_priv->display.update_wm = NULL; + } + dev_priv->display.init_clock_gating = ivybridge_init_clock_gating; + } else dev_priv->display.update_wm = NULL; } else if (IS_PINEVIEW(dev)) { @@ -7304,18 +7675,30 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.update_wm = NULL; } else dev_priv->display.update_wm = pineview_update_wm; - } else if (IS_G4X(dev)) + } else if (IS_G4X(dev)) { dev_priv->display.update_wm = g4x_update_wm; - else if (IS_GEN4(dev)) + dev_priv->display.init_clock_gating = g4x_init_clock_gating; + } else if (IS_GEN4(dev)) { dev_priv->display.update_wm = i965_update_wm; - else if (IS_GEN3(dev)) { + if (IS_CRESTLINE(dev)) + dev_priv->display.init_clock_gating = crestline_init_clock_gating; + else if (IS_BROADWATER(dev)) + dev_priv->display.init_clock_gating = broadwater_init_clock_gating; + } else if (IS_GEN3(dev)) { dev_priv->display.update_wm = i9xx_update_wm; dev_priv->display.get_fifo_size = i9xx_get_fifo_size; + dev_priv->display.init_clock_gating = gen3_init_clock_gating; + } else if (IS_I865G(dev)) { + dev_priv->display.update_wm = i830_update_wm; + dev_priv->display.init_clock_gating = i85x_init_clock_gating; + dev_priv->display.get_fifo_size = i830_get_fifo_size; } else if (IS_I85X(dev)) { dev_priv->display.update_wm = i9xx_update_wm; dev_priv->display.get_fifo_size = i85x_get_fifo_size; + dev_priv->display.init_clock_gating = i85x_init_clock_gating; } else { dev_priv->display.update_wm = i830_update_wm; + dev_priv->display.init_clock_gating = i830_init_clock_gating; if (IS_845G(dev)) dev_priv->display.get_fifo_size = i845_get_fifo_size; else @@ -7441,12 +7824,11 @@ void intel_modeset_init(struct drm_device *dev) intel_crtc_init(dev, i); } - intel_setup_outputs(dev); - - intel_enable_clock_gating(dev); - /* Just disable it once at startup */ i915_disable_vga(dev); + intel_setup_outputs(dev); + + intel_init_clock_gating(dev); if (IS_IRONLAKE_M(dev)) { ironlake_enable_drps(dev); @@ -7456,12 +7838,15 @@ void intel_modeset_init(struct drm_device *dev) if (IS_GEN6(dev)) gen6_enable_rps(dev_priv); - if (IS_IRONLAKE_M(dev)) - ironlake_enable_rc6(dev); - INIT_WORK(&dev_priv->idle_work, intel_idle_update); setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer, (unsigned long)dev); +} + +void intel_modeset_gem_init(struct drm_device *dev) +{ + if (IS_IRONLAKE_M(dev)) + ironlake_enable_rc6(dev); intel_setup_overlay(dev); } |