drm/i915: Rename intel_output to intel_encoder.

The intel_output naming is inherited from the UMS code, which had a
structure of screen -> CRTC -> output.  The DRM code has an additional
notion of encoder/connector, so the structure is screen -> CRTC ->
encoder -> connector.  This is a useful structure for SDVO encoders
which can support multiple connectors (each of which requires
different programming in the one encoder and could be connected to
different CRTCs), or for DVI-I, where multiple encoders feed into the
connector for whether it's used for digital or analog.  Most of our
code is encoder-related, so transition it to talking about encoders
before we start trying to distinguish connectors.

This patch is produced by sed s/intel_output/intel_encoder/ over the
driver.

Signed-off-by: Eric Anholt <eric@anholt.net>

1 files changed, 46 insertions, 46 deletions

diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index a4d2606de77..62282f34eba 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -79,8 +79,8 @@ static struct intel_dvo_device intel_dvo_devices[] = {
 static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
-	struct intel_output *intel_output = enc_to_intel_output(encoder);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 	u32 dvo_reg = dvo->dvo_reg;
 	u32 temp = I915_READ(dvo_reg);
 
@@ -98,8 +98,8 @@ static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
 static void intel_dvo_save(struct drm_connector *connector)
 {
 	struct drm_i915_private *dev_priv = connector->dev->dev_private;
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 
 	/* Each output should probably just save the registers it touches,
 	 * but for now, use more overkill.
@@ -114,8 +114,8 @@ static void intel_dvo_save(struct drm_connector *connector)
 static void intel_dvo_restore(struct drm_connector *connector)
 {
 	struct drm_i915_private *dev_priv = connector->dev->dev_private;
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 
 	dvo->dev_ops->restore(dvo);
 
@@ -127,8 +127,8 @@ static void intel_dvo_restore(struct drm_connector *connector)
 static int intel_dvo_mode_valid(struct drm_connector *connector,
 				struct drm_display_mode *mode)
 {
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
@@ -149,8 +149,8 @@ static bool intel_dvo_mode_fixup(struct drm_encoder *encoder,
 				 struct drm_display_mode *mode,
 				 struct drm_display_mode *adjusted_mode)
 {
-	struct intel_output *intel_output = enc_to_intel_output(encoder);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 
 	/* If we have timings from the BIOS for the panel, put them in
 	 * to the adjusted mode.  The CRTC will be set up for this mode,
@@ -185,8 +185,8 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	struct intel_output *intel_output = enc_to_intel_output(encoder);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 	int pipe = intel_crtc->pipe;
 	u32 dvo_val;
 	u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg;
@@ -240,23 +240,23 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
  */
 static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector)
 {
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 
 	return dvo->dev_ops->detect(dvo);
 }
 
 static int intel_dvo_get_modes(struct drm_connector *connector)
 {
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 
 	/* We should probably have an i2c driver get_modes function for those
 	 * devices which will have a fixed set of modes determined by the chip
 	 * (TV-out, for example), but for now with just TMDS and LVDS,
 	 * that's not the case.
 	 */
-	intel_ddc_get_modes(intel_output);
+	intel_ddc_get_modes(intel_encoder);
 	if (!list_empty(&connector->probed_modes))
 		return 1;
 
@@ -274,8 +274,8 @@ static int intel_dvo_get_modes(struct drm_connector *connector)
 
 static void intel_dvo_destroy (struct drm_connector *connector)
 {
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 
 	if (dvo) {
 		if (dvo->dev_ops->destroy)
@@ -285,13 +285,13 @@ static void intel_dvo_destroy (struct drm_connector *connector)
 		/* no need, in i830_dvoices[] now */
 		//kfree(dvo);
 	}
-	if (intel_output->i2c_bus)
-		intel_i2c_destroy(intel_output->i2c_bus);
-	if (intel_output->ddc_bus)
-		intel_i2c_destroy(intel_output->ddc_bus);
+	if (intel_encoder->i2c_bus)
+		intel_i2c_destroy(intel_encoder->i2c_bus);
+	if (intel_encoder->ddc_bus)
+		intel_i2c_destroy(intel_encoder->ddc_bus);
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
-	kfree(intel_output);
+	kfree(intel_encoder);
 }
 
 #ifdef RANDR_GET_CRTC_INTERFACE
@@ -299,8 +299,8 @@ static struct drm_crtc *intel_dvo_get_crtc(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 	int pipe = !!(I915_READ(dvo->dvo_reg) & SDVO_PIPE_B_SELECT);
 
 	return intel_pipe_to_crtc(pScrn, pipe);
@@ -351,8 +351,8 @@ intel_dvo_get_current_mode (struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+	struct intel_dvo_device *dvo = intel_encoder->dev_priv;
 	uint32_t dvo_reg = dvo->dvo_reg;
 	uint32_t dvo_val = I915_READ(dvo_reg);
 	struct drm_display_mode *mode = NULL;
@@ -382,24 +382,24 @@ intel_dvo_get_current_mode (struct drm_connector *connector)
 
 void intel_dvo_init(struct drm_device *dev)
 {
-	struct intel_output *intel_output;
+	struct intel_encoder *intel_encoder;
 	struct intel_dvo_device *dvo;
 	struct i2c_adapter *i2cbus = NULL;
 	int ret = 0;
 	int i;
 	int encoder_type = DRM_MODE_ENCODER_NONE;
-	intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
-	if (!intel_output)
+	intel_encoder = kzalloc (sizeof(struct intel_encoder), GFP_KERNEL);
+	if (!intel_encoder)
 		return;
 
 	/* Set up the DDC bus */
-	intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D");
-	if (!intel_output->ddc_bus)
+	intel_encoder->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D");
+	if (!intel_encoder->ddc_bus)
 		goto free_intel;
 
 	/* Now, try to find a controller */
 	for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
-		struct drm_connector *connector = &intel_output->base;
+		struct drm_connector *connector = &intel_encoder->base;
 		int gpio;
 
 		dvo = &intel_dvo_devices[i];
@@ -434,11 +434,11 @@ void intel_dvo_init(struct drm_device *dev)
 		if (!ret)
 			continue;
 
-		intel_output->type = INTEL_OUTPUT_DVO;
-		intel_output->crtc_mask = (1 << 0) | (1 << 1);
+		intel_encoder->type = INTEL_OUTPUT_DVO;
+		intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
 		switch (dvo->type) {
 		case INTEL_DVO_CHIP_TMDS:
-			intel_output->clone_mask =
+			intel_encoder->clone_mask =
 				(1 << INTEL_DVO_TMDS_CLONE_BIT) |
 				(1 << INTEL_ANALOG_CLONE_BIT);
 			drm_connector_init(dev, connector,
@@ -447,7 +447,7 @@ void intel_dvo_init(struct drm_device *dev)
 			encoder_type = DRM_MODE_ENCODER_TMDS;
 			break;
 		case INTEL_DVO_CHIP_LVDS:
-			intel_output->clone_mask =
+			intel_encoder->clone_mask =
 				(1 << INTEL_DVO_LVDS_CLONE_BIT);
 			drm_connector_init(dev, connector,
 					   &intel_dvo_connector_funcs,
@@ -462,16 +462,16 @@ void intel_dvo_init(struct drm_device *dev)
 		connector->interlace_allowed = false;
 		connector->doublescan_allowed = false;
 
-		intel_output->dev_priv = dvo;
-		intel_output->i2c_bus = i2cbus;
+		intel_encoder->dev_priv = dvo;
+		intel_encoder->i2c_bus = i2cbus;
 
-		drm_encoder_init(dev, &intel_output->enc,
+		drm_encoder_init(dev, &intel_encoder->enc,
 				 &intel_dvo_enc_funcs, encoder_type);
-		drm_encoder_helper_add(&intel_output->enc,
+		drm_encoder_helper_add(&intel_encoder->enc,
 				       &intel_dvo_helper_funcs);
 
-		drm_mode_connector_attach_encoder(&intel_output->base,
-						  &intel_output->enc);
+		drm_mode_connector_attach_encoder(&intel_encoder->base,
+						  &intel_encoder->enc);
 		if (dvo->type == INTEL_DVO_CHIP_LVDS) {
 			/* For our LVDS chipsets, we should hopefully be able
 			 * to dig the fixed panel mode out of the BIOS data.
@@ -489,10 +489,10 @@ void intel_dvo_init(struct drm_device *dev)
 		return;
 	}
 
-	intel_i2c_destroy(intel_output->ddc_bus);
+	intel_i2c_destroy(intel_encoder->ddc_bus);
 	/* Didn't find a chip, so tear down. */
 	if (i2cbus != NULL)
 		intel_i2c_destroy(i2cbus);
 free_intel:
-	kfree(intel_output);
+	kfree(intel_encoder);
 }