summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_i2c.c
diff options
context:
space:
mode:
authorChris Wilson <chris@chris-wilson.co.uk>2010-09-24 12:52:03 +0100
committerChris Wilson <chris@chris-wilson.co.uk>2010-09-28 13:29:10 +0100
commite957d7720a2797b31231616014b68f4f6203145e (patch)
tree07fd5eb66781405b408830381c99b45c26d34f85 /drivers/gpu/drm/i915/intel_i2c.c
parenta56ba56c275b1c2b982c8901ab92bf5a0fd0b757 (diff)
drm/i915/sdvo: Fix GMBUSification
Besides a couple of bugs when writing more than a single byte along the GMBUS, SDVO was completely failing whilst trying to use GMBUS, so use bit banging instead. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Diffstat (limited to 'drivers/gpu/drm/i915/intel_i2c.c')
-rw-r--r--drivers/gpu/drm/i915/intel_i2c.c181
1 files changed, 124 insertions, 57 deletions
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 6f4d128935a..91920247d4f 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -38,6 +38,12 @@
#define I2C_RISEFALL_TIME 20
+static inline struct intel_gmbus *
+to_intel_gmbus(struct i2c_adapter *i2c)
+{
+ return container_of(i2c, struct intel_gmbus, adapter);
+}
+
struct intel_gpio {
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
@@ -71,10 +77,27 @@ static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
I915_WRITE(DSPCLK_GATE_D, val);
}
+static u32 get_reserved(struct intel_gpio *gpio)
+{
+ struct drm_i915_private *dev_priv = gpio->dev_priv;
+ struct drm_device *dev = dev_priv->dev;
+ u32 reserved = 0;
+
+ /* On most chips, these bits must be preserved in software. */
+ if (!IS_I830(dev) && !IS_845G(dev))
+ reserved = I915_READ(gpio->reg) & (GPIO_DATA_PULLUP_DISABLE |
+ GPIO_CLOCK_PULLUP_DISABLE);
+
+ return reserved;
+}
+
static int get_clock(void *data)
{
struct intel_gpio *gpio = data;
struct drm_i915_private *dev_priv = gpio->dev_priv;
+ u32 reserved = get_reserved(gpio);
+ I915_WRITE(gpio->reg, reserved | GPIO_CLOCK_DIR_MASK);
+ I915_WRITE(gpio->reg, reserved);
return (I915_READ(gpio->reg) & GPIO_CLOCK_VAL_IN) != 0;
}
@@ -82,6 +105,9 @@ static int get_data(void *data)
{
struct intel_gpio *gpio = data;
struct drm_i915_private *dev_priv = gpio->dev_priv;
+ u32 reserved = get_reserved(gpio);
+ I915_WRITE(gpio->reg, reserved | GPIO_DATA_DIR_MASK);
+ I915_WRITE(gpio->reg, reserved);
return (I915_READ(gpio->reg) & GPIO_DATA_VAL_IN) != 0;
}
@@ -89,13 +115,8 @@ static void set_clock(void *data, int state_high)
{
struct intel_gpio *gpio = data;
struct drm_i915_private *dev_priv = gpio->dev_priv;
- struct drm_device *dev = dev_priv->dev;
- u32 reserved = 0, clock_bits;
-
- /* On most chips, these bits must be preserved in software. */
- if (!IS_I830(dev) && !IS_845G(dev))
- reserved = I915_READ(gpio->reg) & (GPIO_DATA_PULLUP_DISABLE |
- GPIO_CLOCK_PULLUP_DISABLE);
+ u32 reserved = get_reserved(gpio);
+ u32 clock_bits;
if (state_high)
clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
@@ -111,13 +132,8 @@ static void set_data(void *data, int state_high)
{
struct intel_gpio *gpio = data;
struct drm_i915_private *dev_priv = gpio->dev_priv;
- struct drm_device *dev = dev_priv->dev;
- u32 reserved = 0, data_bits;
-
- /* On most chips, these bits must be preserved in software. */
- if (!IS_I830(dev) && !IS_845G(dev))
- reserved = I915_READ(gpio->reg) & (GPIO_DATA_PULLUP_DISABLE |
- GPIO_CLOCK_PULLUP_DISABLE);
+ u32 reserved = get_reserved(gpio);
+ u32 data_bits;
if (state_high)
data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
@@ -155,7 +171,7 @@ intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)
gpio->reg += PCH_GPIOA - GPIOA;
gpio->dev_priv = dev_priv;
- snprintf(gpio->adapter.name, I2C_NAME_SIZE, "GPIO %d", pin);
+ snprintf(gpio->adapter.name, I2C_NAME_SIZE, "GPIO%c", "?BACDEF?"[pin]);
gpio->adapter.owner = THIS_MODULE;
gpio->adapter.algo_data = &gpio->algo;
gpio->adapter.dev.parent = &dev_priv->dev->pdev->dev;
@@ -170,16 +186,6 @@ intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)
if (i2c_bit_add_bus(&gpio->adapter))
goto out_free;
- intel_i2c_reset(dev_priv->dev);
-
- /* JJJ: raise SCL and SDA? */
- intel_i2c_quirk_set(dev_priv, true);
- set_data(gpio, 1);
- udelay(I2C_RISEFALL_TIME);
- set_clock(gpio, 1);
- udelay(I2C_RISEFALL_TIME);
- intel_i2c_quirk_set(dev_priv, false);
-
return &gpio->adapter;
out_free:
@@ -188,17 +194,27 @@ out_free:
}
static int
-quirk_i2c_transfer(struct drm_i915_private *dev_priv,
- struct i2c_adapter *adapter,
- struct i2c_msg *msgs,
- int num)
+intel_i2c_quirk_xfer(struct drm_i915_private *dev_priv,
+ struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
{
+ struct intel_gpio *gpio = container_of(adapter,
+ struct intel_gpio,
+ adapter);
int ret;
intel_i2c_reset(dev_priv->dev);
intel_i2c_quirk_set(dev_priv, true);
- ret = i2c_transfer(adapter, msgs, num);
+ set_data(gpio, 1);
+ set_clock(gpio, 1);
+ udelay(I2C_RISEFALL_TIME);
+
+ ret = adapter->algo->master_xfer(adapter, msgs, num);
+
+ set_data(gpio, 1);
+ set_clock(gpio, 1);
intel_i2c_quirk_set(dev_priv, false);
return ret;
@@ -213,21 +229,15 @@ gmbus_xfer(struct i2c_adapter *adapter,
struct intel_gmbus,
adapter);
struct drm_i915_private *dev_priv = adapter->algo_data;
- int i, speed, reg_offset;
+ int i, reg_offset;
- if (bus->force_bitbanging)
- return quirk_i2c_transfer(dev_priv, bus->force_bitbanging, msgs, num);
+ if (bus->force_bit)
+ return intel_i2c_quirk_xfer(dev_priv,
+ bus->force_bit, msgs, num);
reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;
- speed = GMBUS_RATE_100KHZ;
- if (INTEL_INFO(dev_priv->dev)->gen > 4 || IS_G4X(dev_priv->dev)) {
- if (bus->pin == GMBUS_PORT_DPB) /* SDVO only? */
- speed = GMBUS_RATE_1MHZ;
- else
- speed = GMBUS_RATE_400KHZ;
- }
- I915_WRITE(GMBUS0 + reg_offset, speed | bus->pin);
+ I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
for (i = 0; i < num; i++) {
u16 len = msgs[i].len;
@@ -239,6 +249,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
(len << GMBUS_BYTE_COUNT_SHIFT) |
(msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
+ POSTING_READ(GMBUS2+reg_offset);
do {
u32 val, loop = 0;
@@ -254,20 +265,35 @@ gmbus_xfer(struct i2c_adapter *adapter,
} while (--len && ++loop < 4);
} while (len);
} else {
- u32 val = 0, loop = 0;
-
- BUG_ON(msgs[i].len > 4);
+ u32 val, loop;
+ val = loop = 0;
do {
- val |= *buf++ << (loop*8);
- } while (--len && +loop < 4);
+ val |= *buf++ << (8 * loop);
+ } while (--len && ++loop < 4);
I915_WRITE(GMBUS3 + reg_offset, val);
I915_WRITE(GMBUS1 + reg_offset,
- (i + 1 == num ? GMBUS_CYCLE_STOP : GMBUS_CYCLE_WAIT ) |
+ (i + 1 == num ? GMBUS_CYCLE_STOP : GMBUS_CYCLE_WAIT) |
(msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |
(msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
+ POSTING_READ(GMBUS2+reg_offset);
+
+ while (len) {
+ if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
+ goto timeout;
+ if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ return 0;
+
+ val = loop = 0;
+ do {
+ val |= *buf++ << (8 * loop);
+ } while (--len && ++loop < 4);
+
+ I915_WRITE(GMBUS3 + reg_offset, val);
+ POSTING_READ(GMBUS2+reg_offset);
+ }
}
if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
@@ -279,17 +305,25 @@ gmbus_xfer(struct i2c_adapter *adapter,
return num;
timeout:
- DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d\n", bus->pin);
+ DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
+ bus->reg0 & 0xff, bus->adapter.name);
/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
- bus->force_bitbanging = intel_gpio_create(dev_priv, bus->pin);
- if (!bus->force_bitbanging)
+ bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff);
+ if (!bus->force_bit)
return -ENOMEM;
- return quirk_i2c_transfer(dev_priv, bus->force_bitbanging, msgs, num);
+ return intel_i2c_quirk_xfer(dev_priv, bus->force_bit, msgs, num);
}
static u32 gmbus_func(struct i2c_adapter *adapter)
{
+ struct intel_gmbus *bus = container_of(adapter,
+ struct intel_gmbus,
+ adapter);
+
+ if (bus->force_bit)
+ bus->force_bit->algo->functionality(bus->force_bit);
+
return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
/* I2C_FUNC_10BIT_ADDR | */
I2C_FUNC_SMBUS_READ_BLOCK_DATA |
@@ -307,15 +341,15 @@ static const struct i2c_algorithm gmbus_algorithm = {
*/
int intel_setup_gmbus(struct drm_device *dev)
{
- static const char *names[] = {
+ static const char *names[GMBUS_NUM_PORTS] = {
"disabled",
"ssc",
"vga",
"panel",
"dpc",
"dpb",
- "dpd",
"reserved"
+ "dpd",
};
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i;
@@ -343,7 +377,8 @@ int intel_setup_gmbus(struct drm_device *dev)
if (ret)
goto err;
- bus->pin = i;
+ /* By default use a conservative clock rate */
+ bus->reg0 = i | GMBUS_RATE_100KHZ;
}
intel_i2c_reset(dev_priv->dev);
@@ -360,6 +395,38 @@ err:
return ret;
}
+void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
+{
+ struct intel_gmbus *bus = to_intel_gmbus(adapter);
+
+ /* speed:
+ * 0x0 = 100 KHz
+ * 0x1 = 50 KHz
+ * 0x2 = 400 KHz
+ * 0x3 = 1000 Khz
+ */
+ bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | (speed << 8);
+}
+
+void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
+{
+ struct intel_gmbus *bus = to_intel_gmbus(adapter);
+
+ if (force_bit) {
+ if (bus->force_bit == NULL) {
+ struct drm_i915_private *dev_priv = adapter->algo_data;
+ bus->force_bit = intel_gpio_create(dev_priv,
+ bus->reg0 & 0xff);
+ }
+ } else {
+ if (bus->force_bit) {
+ i2c_del_adapter(bus->force_bit);
+ kfree(bus->force_bit);
+ bus->force_bit = NULL;
+ }
+ }
+}
+
void intel_teardown_gmbus(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -370,9 +437,9 @@ void intel_teardown_gmbus(struct drm_device *dev)
for (i = 0; i < GMBUS_NUM_PORTS; i++) {
struct intel_gmbus *bus = &dev_priv->gmbus[i];
- if (bus->force_bitbanging) {
- i2c_del_adapter(bus->force_bitbanging);
- kfree(bus->force_bitbanging);
+ if (bus->force_bit) {
+ i2c_del_adapter(bus->force_bit);
+ kfree(bus->force_bit);
}
i2c_del_adapter(&bus->adapter);
}