drm/nv04/disp: hide all the cruft away in its own little hole

It'd be pretty awesome if someone would care enough to port this all
properly to a class interface, perhaps submitting a command stream to
the core via a sw object on PFIFO (emulating how EVO works basically,
and also what nvidia have done forever..)..

But, this seems unlikely given how old this hardware is now, so, lets
just hide it away.

There's a heap of other bits and pieces laying around that are still
tangled.  I'll (re)move them in pieces.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

1 files changed, 720 insertions, 0 deletions

diff --git a/drivers/gpu/drm/nouveau/dispnv04/dfp.c b/drivers/gpu/drm/nouveau/dispnv04/dfp.c
new file mode 100644
index 00000000000..93dd23ff009
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/dispnv04/dfp.c
@@ -0,0 +1,720 @@
+/*
+ * Copyright 2003 NVIDIA, Corporation
+ * Copyright 2006 Dave Airlie
+ * Copyright 2007 Maarten Maathuis
+ * Copyright 2007-2009 Stuart Bennett
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "nouveau_drm.h"
+#include "nouveau_reg.h"
+#include "nouveau_encoder.h"
+#include "nouveau_connector.h"
+#include "nouveau_crtc.h"
+#include "hw.h"
+#include "nvreg.h"
+
+#include <drm/i2c/sil164.h>
+
+#include <subdev/i2c.h>
+
+#define FP_TG_CONTROL_ON  (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS |		\
+			   NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS)
+#define FP_TG_CONTROL_OFF (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_DISABLE |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_HSYNC_DISABLE |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_VSYNC_DISABLE)
+
+static inline bool is_fpc_off(uint32_t fpc)
+{
+	return ((fpc & (FP_TG_CONTROL_ON | FP_TG_CONTROL_OFF)) ==
+			FP_TG_CONTROL_OFF);
+}
+
+int nv04_dfp_get_bound_head(struct drm_device *dev, struct dcb_output *dcbent)
+{
+	/* special case of nv_read_tmds to find crtc associated with an output.
+	 * this does not give a correct answer for off-chip dvi, but there's no
+	 * use for such an answer anyway
+	 */
+	int ramdac = (dcbent->or & DCB_OUTPUT_C) >> 2;
+
+	NVWriteRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_CONTROL,
+	NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE | 0x4);
+	return ((NVReadRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_DATA) & 0x8) >> 3) ^ ramdac;
+}
+
+void nv04_dfp_bind_head(struct drm_device *dev, struct dcb_output *dcbent,
+			int head, bool dl)
+{
+	/* The BIOS scripts don't do this for us, sadly
+	 * Luckily we do know the values ;-)
+	 *
+	 * head < 0 indicates we wish to force a setting with the overrideval
+	 * (for VT restore etc.)
+	 */
+
+	int ramdac = (dcbent->or & DCB_OUTPUT_C) >> 2;
+	uint8_t tmds04 = 0x80;
+
+	if (head != ramdac)
+		tmds04 = 0x88;
+
+	if (dcbent->type == DCB_OUTPUT_LVDS)
+		tmds04 |= 0x01;
+
+	nv_write_tmds(dev, dcbent->or, 0, 0x04, tmds04);
+
+	if (dl)	/* dual link */
+		nv_write_tmds(dev, dcbent->or, 1, 0x04, tmds04 ^ 0x08);
+}
+
+void nv04_dfp_disable(struct drm_device *dev, int head)
+{
+	struct nv04_crtc_reg *crtcstate = nv04_display(dev)->mode_reg.crtc_reg;
+
+	if (NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL) &
+	    FP_TG_CONTROL_ON) {
+		/* digital remnants must be cleaned before new crtc
+		 * values programmed.  delay is time for the vga stuff
+		 * to realise it's in control again
+		 */
+		NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL,
+			      FP_TG_CONTROL_OFF);
+		msleep(50);
+	}
+	/* don't inadvertently turn it on when state written later */
+	crtcstate[head].fp_control = FP_TG_CONTROL_OFF;
+	crtcstate[head].CRTC[NV_CIO_CRE_LCD__INDEX] &=
+		~NV_CIO_CRE_LCD_ROUTE_MASK;
+}
+
+void nv04_dfp_update_fp_control(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc;
+	struct nouveau_crtc *nv_crtc;
+	uint32_t *fpc;
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		nv_crtc = nouveau_crtc(encoder->crtc);
+		fpc = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index].fp_control;
+
+		if (is_fpc_off(*fpc)) {
+			/* using saved value is ok, as (is_digital && dpms_on &&
+			 * fp_control==OFF) is (at present) *only* true when
+			 * fpc's most recent change was by below "off" code
+			 */
+			*fpc = nv_crtc->dpms_saved_fp_control;
+		}
+
+		nv_crtc->fp_users |= 1 << nouveau_encoder(encoder)->dcb->index;
+		NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_FP_TG_CONTROL, *fpc);
+	} else {
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+			nv_crtc = nouveau_crtc(crtc);
+			fpc = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index].fp_control;
+
+			nv_crtc->fp_users &= ~(1 << nouveau_encoder(encoder)->dcb->index);
+			if (!is_fpc_off(*fpc) && !nv_crtc->fp_users) {
+				nv_crtc->dpms_saved_fp_control = *fpc;
+				/* cut the FP output */
+				*fpc &= ~FP_TG_CONTROL_ON;
+				*fpc |= FP_TG_CONTROL_OFF;
+				NVWriteRAMDAC(dev, nv_crtc->index,
+					      NV_PRAMDAC_FP_TG_CONTROL, *fpc);
+			}
+		}
+	}
+}
+
+static struct drm_encoder *get_tmds_slave(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct dcb_output *dcb = nouveau_encoder(encoder)->dcb;
+	struct drm_encoder *slave;
+
+	if (dcb->type != DCB_OUTPUT_TMDS || dcb->location == DCB_LOC_ON_CHIP)
+		return NULL;
+
+	/* Some BIOSes (e.g. the one in a Quadro FX1000) report several
+	 * TMDS transmitters at the same I2C address, in the same I2C
+	 * bus. This can still work because in that case one of them is
+	 * always hard-wired to a reasonable configuration using straps,
+	 * and the other one needs to be programmed.
+	 *
+	 * I don't think there's a way to know which is which, even the
+	 * blob programs the one exposed via I2C for *both* heads, so
+	 * let's do the same.
+	 */
+	list_for_each_entry(slave, &dev->mode_config.encoder_list, head) {
+		struct dcb_output *slave_dcb = nouveau_encoder(slave)->dcb;
+
+		if (slave_dcb->type == DCB_OUTPUT_TMDS && get_slave_funcs(slave) &&
+		    slave_dcb->tmdsconf.slave_addr == dcb->tmdsconf.slave_addr)
+			return slave;
+	}
+
+	return NULL;
+}
+
+static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
+				const struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
+
+	if (!nv_connector->native_mode ||
+	    nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
+	    mode->hdisplay > nv_connector->native_mode->hdisplay ||
+	    mode->vdisplay > nv_connector->native_mode->vdisplay) {
+		nv_encoder->mode = *adjusted_mode;
+
+	} else {
+		nv_encoder->mode = *nv_connector->native_mode;
+		adjusted_mode->clock = nv_connector->native_mode->clock;
+	}
+
+	return true;
+}
+
+static void nv04_dfp_prepare_sel_clk(struct drm_device *dev,
+				     struct nouveau_encoder *nv_encoder, int head)
+{
+	struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
+	uint32_t bits1618 = nv_encoder->dcb->or & DCB_OUTPUT_A ? 0x10000 : 0x40000;
+
+	if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP)
+		return;
+
+	/* SEL_CLK is only used on the primary ramdac
+	 * It toggles spread spectrum PLL output and sets the bindings of PLLs
+	 * to heads on digital outputs
+	 */
+	if (head)
+		state->sel_clk |= bits1618;
+	else
+		state->sel_clk &= ~bits1618;
+
+	/* nv30:
+	 *	bit 0		NVClk spread spectrum on/off
+	 *	bit 2		MemClk spread spectrum on/off
+	 * 	bit 4		PixClk1 spread spectrum on/off toggle
+	 * 	bit 6		PixClk2 spread spectrum on/off toggle
+	 *
+	 * nv40 (observations from bios behaviour and mmio traces):
+	 * 	bits 4&6	as for nv30
+	 * 	bits 5&7	head dependent as for bits 4&6, but do not appear with 4&6;
+	 * 			maybe a different spread mode
+	 * 	bits 8&10	seen on dual-link dvi outputs, purpose unknown (set by POST scripts)
+	 * 	The logic behind turning spread spectrum on/off in the first place,
+	 * 	and which bit-pair to use, is unclear on nv40 (for earlier cards, the fp table
+	 * 	entry has the necessary info)
+	 */
+	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS && nv04_display(dev)->saved_reg.sel_clk & 0xf0) {
+		int shift = (nv04_display(dev)->saved_reg.sel_clk & 0x50) ? 0 : 1;
+
+		state->sel_clk &= ~0xf0;
+		state->sel_clk |= (head ? 0x40 : 0x10) << shift;
+	}
+}
+
+static void nv04_dfp_prepare(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_encoder_helper_funcs *helper = encoder->helper_private;
+	struct drm_device *dev = encoder->dev;
+	int head = nouveau_crtc(encoder->crtc)->index;
+	struct nv04_crtc_reg *crtcstate = nv04_display(dev)->mode_reg.crtc_reg;
+	uint8_t *cr_lcd = &crtcstate[head].CRTC[NV_CIO_CRE_LCD__INDEX];
+	uint8_t *cr_lcd_oth = &crtcstate[head ^ 1].CRTC[NV_CIO_CRE_LCD__INDEX];
+
+	helper->dpms(encoder, DRM_MODE_DPMS_OFF);
+
+	nv04_dfp_prepare_sel_clk(dev, nv_encoder, head);
+
+	*cr_lcd = (*cr_lcd & ~NV_CIO_CRE_LCD_ROUTE_MASK) | 0x3;
+
+	if (nv_two_heads(dev)) {
+		if (nv_encoder->dcb->location == DCB_LOC_ON_CHIP)
+			*cr_lcd |= head ? 0x0 : 0x8;
+		else {
+			*cr_lcd |= (nv_encoder->dcb->or << 4) & 0x30;
+			if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS)
+				*cr_lcd |= 0x30;
+			if ((*cr_lcd & 0x30) == (*cr_lcd_oth & 0x30)) {
+				/* avoid being connected to both crtcs */
+				*cr_lcd_oth &= ~0x30;
+				NVWriteVgaCrtc(dev, head ^ 1,
+					       NV_CIO_CRE_LCD__INDEX,
+					       *cr_lcd_oth);
+			}
+		}
+	}
+}
+
+
+static void nv04_dfp_mode_set(struct drm_encoder *encoder,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct nouveau_device *device = nouveau_dev(dev);
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+	struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
+	struct nv04_crtc_reg *savep = &nv04_display(dev)->saved_reg.crtc_reg[nv_crtc->index];
+	struct nouveau_connector *nv_connector = nouveau_crtc_connector_get(nv_crtc);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_display_mode *output_mode = &nv_encoder->mode;
+	struct drm_connector *connector = &nv_connector->base;
+	uint32_t mode_ratio, panel_ratio;
+
+	NV_DEBUG(drm, "Output mode on CRTC %d:\n", nv_crtc->index);
+	drm_mode_debug_printmodeline(output_mode);
+
+	/* Initialize the FP registers in this CRTC. */
+	regp->fp_horiz_regs[FP_DISPLAY_END] = output_mode->hdisplay - 1;
+	regp->fp_horiz_regs[FP_TOTAL] = output_mode->htotal - 1;
+	if (!nv_gf4_disp_arch(dev) ||
+	    (output_mode->hsync_start - output_mode->hdisplay) >=
+					drm->vbios.digital_min_front_porch)
+		regp->fp_horiz_regs[FP_CRTC] = output_mode->hdisplay;
+	else
+		regp->fp_horiz_regs[FP_CRTC] = output_mode->hsync_start - drm->vbios.digital_min_front_porch - 1;
+	regp->fp_horiz_regs[FP_SYNC_START] = output_mode->hsync_start - 1;
+	regp->fp_horiz_regs[FP_SYNC_END] = output_mode->hsync_end - 1;
+	regp->fp_horiz_regs[FP_VALID_START] = output_mode->hskew;
+	regp->fp_horiz_regs[FP_VALID_END] = output_mode->hdisplay - 1;
+
+	regp->fp_vert_regs[FP_DISPLAY_END] = output_mode->vdisplay - 1;
+	regp->fp_vert_regs[FP_TOTAL] = output_mode->vtotal - 1;
+	regp->fp_vert_regs[FP_CRTC] = output_mode->vtotal - 5 - 1;
+	regp->fp_vert_regs[FP_SYNC_START] = output_mode->vsync_start - 1;
+	regp->fp_vert_regs[FP_SYNC_END] = output_mode->vsync_end - 1;
+	regp->fp_vert_regs[FP_VALID_START] = 0;
+	regp->fp_vert_regs[FP_VALID_END] = output_mode->vdisplay - 1;
+
+	/* bit26: a bit seen on some g7x, no as yet discernable purpose */
+	regp->fp_control = NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |
+			   (savep->fp_control & (1 << 26 | NV_PRAMDAC_FP_TG_CONTROL_READ_PROG));
+	/* Deal with vsync/hsync polarity */
+	/* LVDS screens do set this, but modes with +ve syncs are very rare */
+	if (output_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS;
+	if (output_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS;
+	/* panel scaling first, as native would get set otherwise */
+	if (nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
+	    nv_connector->scaling_mode == DRM_MODE_SCALE_CENTER)	/* panel handles it */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_CENTER;
+	else if (adjusted_mode->hdisplay == output_mode->hdisplay &&
+		 adjusted_mode->vdisplay == output_mode->vdisplay) /* native mode */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_NATIVE;
+	else /* gpu needs to scale */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_SCALE;
+	if (nv_rd32(device, NV_PEXTDEV_BOOT_0) & NV_PEXTDEV_BOOT_0_STRAP_FP_IFACE_12BIT)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12;
+	if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP &&
+	    output_mode->clock > 165000)
+		regp->fp_control |= (2 << 24);
+	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS) {
+		bool duallink = false, dummy;
+		if (nv_connector->edid &&
+		    nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) {
+			duallink = (((u8 *)nv_connector->edid)[121] == 2);
+		} else {
+			nouveau_bios_parse_lvds_table(dev, output_mode->clock,
+						      &duallink, &dummy);
+		}
+
+		if (duallink)
+			regp->fp_control |= (8 << 28);
+	} else
+	if (output_mode->clock > 165000)
+		regp->fp_control |= (8 << 28);
+
+	regp->fp_debug_0 = NV_PRAMDAC_FP_DEBUG_0_YWEIGHT_ROUND |
+			   NV_PRAMDAC_FP_DEBUG_0_XWEIGHT_ROUND |
+			   NV_PRAMDAC_FP_DEBUG_0_YINTERP_BILINEAR |
+			   NV_PRAMDAC_FP_DEBUG_0_XINTERP_BILINEAR |
+			   NV_RAMDAC_FP_DEBUG_0_TMDS_ENABLED |
+			   NV_PRAMDAC_FP_DEBUG_0_YSCALE_ENABLE |
+			   NV_PRAMDAC_FP_DEBUG_0_XSCALE_ENABLE;
+
+	/* We want automatic scaling */
+	regp->fp_debug_1 = 0;
+	/* This can override HTOTAL and VTOTAL */
+	regp->fp_debug_2 = 0;
+
+	/* Use 20.12 fixed point format to avoid floats */
+	mode_ratio = (1 << 12) * adjusted_mode->hdisplay / adjusted_mode->vdisplay;
+	panel_ratio = (1 << 12) * output_mode->hdisplay / output_mode->vdisplay;
+	/* if ratios are equal, SCALE_ASPECT will automatically (and correctly)
+	 * get treated the same as SCALE_FULLSCREEN */
+	if (nv_connector->scaling_mode == DRM_MODE_SCALE_ASPECT &&
+	    mode_ratio != panel_ratio) {
+		uint32_t diff, scale;
+		bool divide_by_2 = nv_gf4_disp_arch(dev);
+
+		if (mode_ratio < panel_ratio) {
+			/* vertical needs to expand to glass size (automatic)
+			 * horizontal needs to be scaled at vertical scale factor
+			 * to maintain aspect */
+
+			scale = (1 << 12) * adjusted_mode->vdisplay / output_mode->vdisplay;
+			regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_XSCALE_TESTMODE_ENABLE |
+					   XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE);
+
+			/* restrict area of screen used, horizontally */
+			diff = output_mode->hdisplay -
+			       output_mode->vdisplay * mode_ratio / (1 << 12);
+			regp->fp_horiz_regs[FP_VALID_START] += diff / 2;
+			regp->fp_horiz_regs[FP_VALID_END] -= diff / 2;
+		}
+
+		if (mode_ratio > panel_ratio) {
+			/* horizontal needs to expand to glass size (automatic)
+			 * vertical needs to be scaled at horizontal scale factor
+			 * to maintain aspect */
+
+			scale = (1 << 12) * adjusted_mode->hdisplay / output_mode->hdisplay;
+			regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_YSCALE_TESTMODE_ENABLE |
+					   XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_YSCALE_VALUE);
+
+			/* restrict area of screen used, vertically */
+			diff = output_mode->vdisplay -
+			       (1 << 12) * output_mode->hdisplay / mode_ratio;
+			regp->fp_vert_regs[FP_VALID_START] += diff / 2;
+			regp->fp_vert_regs[FP_VALID_END] -= diff / 2;
+		}
+	}
+
+	/* Output property. */
+	if ((nv_connector->dithering_mode == DITHERING_MODE_ON) ||
+	    (nv_connector->dithering_mode == DITHERING_MODE_AUTO &&
+	     encoder->crtc->fb->depth > connector->display_info.bpc * 3)) {
+		if (nv_device(drm->device)->chipset == 0x11)
+			regp->dither = savep->dither | 0x00010000;
+		else {
+			int i;
+			regp->dither = savep->dither | 0x00000001;
+			for (i = 0; i < 3; i++) {
+				regp->dither_regs[i] = 0xe4e4e4e4;
+				regp->dither_regs[i + 3] = 0x44444444;
+			}
+		}
+	} else {
+		if (nv_device(drm->device)->chipset != 0x11) {
+			/* reset them */
+			int i;
+			for (i = 0; i < 3; i++) {
+				regp->dither_regs[i] = savep->dither_regs[i];
+				regp->dither_regs[i + 3] = savep->dither_regs[i + 3];
+			}
+		}
+		regp->dither = savep->dither;
+	}
+
+	regp->fp_margin_color = 0;
+}
+
+static void nv04_dfp_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct drm_encoder_helper_funcs *helper = encoder->helper_private;
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct dcb_output *dcbe = nv_encoder->dcb;
+	int head = nouveau_crtc(encoder->crtc)->index;
+	struct drm_encoder *slave_encoder;
+
+	if (dcbe->type == DCB_OUTPUT_TMDS)
+		run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock);
+	else if (dcbe->type == DCB_OUTPUT_LVDS)
+		call_lvds_script(dev, dcbe, head, LVDS_RESET, nv_encoder->mode.clock);
+
+	/* update fp_control state for any changes made by scripts,
+	 * so correct value is written at DPMS on */
+	nv04_display(dev)->mode_reg.crtc_reg[head].fp_control =
+		NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL);
+
+	/* This could use refinement for flatpanels, but it should work this way */
+	if (nv_device(drm->device)->chipset < 0x44)
+		NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0xf0000000);
+	else
+		NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0x00100000);
+
+	/* Init external transmitters */
+	slave_encoder = get_tmds_slave(encoder);
+	if (slave_encoder)
+		get_slave_funcs(slave_encoder)->mode_set(
+			slave_encoder, &nv_encoder->mode, &nv_encoder->mode);
+
+	helper->dpms(encoder, DRM_MODE_DPMS_ON);
+
+	NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+		 drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
+		 nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+}
+
+static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode)
+{
+#ifdef __powerpc__
+	struct drm_device *dev = encoder->dev;
+	struct nouveau_device *device = nouveau_dev(dev);
+
+	/* BIOS scripts usually take care of the backlight, thanks
+	 * Apple for your consistency.
+	 */
+	if (dev->pci_device == 0x0174 || dev->pci_device == 0x0179 ||
+	    dev->pci_device == 0x0189 || dev->pci_device == 0x0329) {
+		if (mode == DRM_MODE_DPMS_ON) {
+			nv_mask(device, NV_PBUS_DEBUG_DUALHEAD_CTL, 0, 1 << 31);
+			nv_mask(device, NV_PCRTC_GPIO_EXT, 3, 1);
+		} else {
+			nv_mask(device, NV_PBUS_DEBUG_DUALHEAD_CTL, 1 << 31, 0);
+			nv_mask(device, NV_PCRTC_GPIO_EXT, 3, 0);
+		}
+	}
+#endif
+}
+
+static inline bool is_powersaving_dpms(int mode)
+{
+	return mode != DRM_MODE_DPMS_ON && mode != NV_DPMS_CLEARED;
+}
+
+static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	bool was_powersaving = is_powersaving_dpms(nv_encoder->last_dpms);
+
+	if (nv_encoder->last_dpms == mode)
+		return;
+	nv_encoder->last_dpms = mode;
+
+	NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
+		 mode, nv_encoder->dcb->index);
+
+	if (was_powersaving && is_powersaving_dpms(mode))
+		return;
+
+	if (nv_encoder->dcb->lvdsconf.use_power_scripts) {
+		/* when removing an output, crtc may not be set, but PANEL_OFF
+		 * must still be run
+		 */
+		int head = crtc ? nouveau_crtc(crtc)->index :
+			   nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
+
+		if (mode == DRM_MODE_DPMS_ON) {
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_ON, nv_encoder->mode.clock);
+		} else
+			/* pxclk of 0 is fine for PANEL_OFF, and for a
+			 * disconnected LVDS encoder there is no native_mode
+			 */
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_OFF, 0);
+	}
+
+	nv04_dfp_update_backlight(encoder, mode);
+	nv04_dfp_update_fp_control(encoder, mode);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		nv04_dfp_prepare_sel_clk(dev, nv_encoder, nouveau_crtc(crtc)->index);
+	else {
+		nv04_display(dev)->mode_reg.sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK);
+		nv04_display(dev)->mode_reg.sel_clk &= ~0xf0;
+	}
+	NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, nv04_display(dev)->mode_reg.sel_clk);
+}
+
+static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct nouveau_drm *drm = nouveau_drm(encoder->dev);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+	if (nv_encoder->last_dpms == mode)
+		return;
+	nv_encoder->last_dpms = mode;
+
+	NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
+		 mode, nv_encoder->dcb->index);
+
+	nv04_dfp_update_backlight(encoder, mode);
+	nv04_dfp_update_fp_control(encoder, mode);
+}
+
+static void nv04_dfp_save(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+
+	if (nv_two_heads(dev))
+		nv_encoder->restore.head =
+			nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
+}
+
+static void nv04_dfp_restore(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+	int head = nv_encoder->restore.head;
+
+	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS) {
+		struct nouveau_connector *connector =
+			nouveau_encoder_connector_get(nv_encoder);
+
+		if (connector && connector->native_mode)
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_ON,
+					 connector->native_mode->clock);
+
+	} else if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS) {
+		int clock = nouveau_hw_pllvals_to_clk
+					(&nv04_display(dev)->saved_reg.crtc_reg[head].pllvals);
+
+		run_tmds_table(dev, nv_encoder->dcb, head, clock);
+	}
+
+	nv_encoder->last_dpms = NV_DPMS_CLEARED;
+}
+
+static void nv04_dfp_destroy(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+	if (get_slave_funcs(encoder))
+		get_slave_funcs(encoder)->destroy(encoder);
+
+	drm_encoder_cleanup(encoder);
+	kfree(nv_encoder);
+}
+
+static void nv04_tmds_slave_init(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct dcb_output *dcb = nouveau_encoder(encoder)->dcb;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nouveau_i2c *i2c = nouveau_i2c(drm->device);
+	struct nouveau_i2c_port *port = i2c->find(i2c, 2);
+	struct i2c_board_info info[] = {
+		{
+			.type = "sil164",
+			.addr = (dcb->tmdsconf.slave_addr == 0x7 ? 0x3a : 0x38),
+			.platform_data = &(struct sil164_encoder_params) {
+				SIL164_INPUT_EDGE_RISING
+			}
+		},
+		{ }
+	};
+	int type;
+
+	if (!nv_gf4_disp_arch(dev) || !port ||
+	    get_tmds_slave(encoder))
+		return;
+
+	type = i2c->identify(i2c, 2, "TMDS transmitter", info, NULL);
+	if (type < 0)
+		return;
+
+	drm_i2c_encoder_init(dev, to_encoder_slave(encoder),
+			     &port->adapter, &info[type]);
+}
+
+static const struct drm_encoder_helper_funcs nv04_lvds_helper_funcs = {
+	.dpms = nv04_lvds_dpms,
+	.save = nv04_dfp_save,
+	.restore = nv04_dfp_restore,
+	.mode_fixup = nv04_dfp_mode_fixup,
+	.prepare = nv04_dfp_prepare,
+	.commit = nv04_dfp_commit,
+	.mode_set = nv04_dfp_mode_set,
+	.detect = NULL,
+};
+
+static const struct drm_encoder_helper_funcs nv04_tmds_helper_funcs = {
+	.dpms = nv04_tmds_dpms,
+	.save = nv04_dfp_save,
+	.restore = nv04_dfp_restore,
+	.mode_fixup = nv04_dfp_mode_fixup,
+	.prepare = nv04_dfp_prepare,
+	.commit = nv04_dfp_commit,
+	.mode_set = nv04_dfp_mode_set,
+	.detect = NULL,
+};
+
+static const struct drm_encoder_funcs nv04_dfp_funcs = {
+	.destroy = nv04_dfp_destroy,
+};
+
+int
+nv04_dfp_create(struct drm_connector *connector, struct dcb_output *entry)
+{
+	const struct drm_encoder_helper_funcs *helper;
+	struct nouveau_encoder *nv_encoder = NULL;
+	struct drm_encoder *encoder;
+	int type;
+
+	switch (entry->type) {
+	case DCB_OUTPUT_TMDS:
+		type = DRM_MODE_ENCODER_TMDS;
+		helper = &nv04_tmds_helper_funcs;
+		break;
+	case DCB_OUTPUT_LVDS:
+		type = DRM_MODE_ENCODER_LVDS;
+		helper = &nv04_lvds_helper_funcs;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
+	if (!nv_encoder)
+		return -ENOMEM;
+
+	encoder = to_drm_encoder(nv_encoder);
+
+	nv_encoder->dcb = entry;
+	nv_encoder->or = ffs(entry->or) - 1;
+
+	drm_encoder_init(connector->dev, encoder, &nv04_dfp_funcs, type);
+	drm_encoder_helper_add(encoder, helper);
+
+	encoder->possible_crtcs = entry->heads;
+	encoder->possible_clones = 0;
+
+	if (entry->type == DCB_OUTPUT_TMDS &&
+	    entry->location != DCB_LOC_ON_CHIP)
+		nv04_tmds_slave_init(encoder);
+
+	drm_mode_connector_attach_encoder(connector, encoder);
+	return 0;
+}