drm/udl: initial UDL driver (v4)

This is an initial drm/kms driver for the displaylink devices.

Supports fb_defio,
supports KMS dumb interface
supports 24bpp via conversion to 16bpp, hw can do this better.
supports hot unplug using new drm core features.

On an unplug, it disables connector polling, unplugs connectors
from sysfs, unplugs fbdev layer (using Kay's API), drops all the
USB device URBs, and call the drm core to unplug the device.

This driver is based in large parts on udlfb.c so I've licensed
it under GPLv2.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 414 insertions, 0 deletions

diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c
new file mode 100644
index 00000000000..b3ecb3d12a1
--- /dev/null
+++ b/drivers/gpu/drm/udl/udl_modeset.c
@@ -0,0 +1,414 @@
+/*
+ * Copyright (C) 2012 Red Hat
+ *
+ * based in parts on udlfb.c:
+ * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it>
+ * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com>
+ * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com>
+
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include "drmP.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "udl_drv.h"
+
+/*
+ * All DisplayLink bulk operations start with 0xAF, followed by specific code
+ * All operations are written to buffers which then later get sent to device
+ */
+static char *udl_set_register(char *buf, u8 reg, u8 val)
+{
+	*buf++ = 0xAF;
+	*buf++ = 0x20;
+	*buf++ = reg;
+	*buf++ = val;
+	return buf;
+}
+
+static char *udl_vidreg_lock(char *buf)
+{
+	return udl_set_register(buf, 0xFF, 0x00);
+}
+
+static char *udl_vidreg_unlock(char *buf)
+{
+	return udl_set_register(buf, 0xFF, 0xFF);
+}
+
+/*
+ * On/Off for driving the DisplayLink framebuffer to the display
+ *  0x00 H and V sync on
+ *  0x01 H and V sync off (screen blank but powered)
+ *  0x07 DPMS powerdown (requires modeset to come back)
+ */
+static char *udl_enable_hvsync(char *buf, bool enable)
+{
+	if (enable)
+		return udl_set_register(buf, 0x1F, 0x00);
+	else
+		return udl_set_register(buf, 0x1F, 0x07);
+}
+
+static char *udl_set_color_depth(char *buf, u8 selection)
+{
+	return udl_set_register(buf, 0x00, selection);
+}
+
+static char *udl_set_base16bpp(char *wrptr, u32 base)
+{
+	/* the base pointer is 16 bits wide, 0x20 is hi byte. */
+	wrptr = udl_set_register(wrptr, 0x20, base >> 16);
+	wrptr = udl_set_register(wrptr, 0x21, base >> 8);
+	return udl_set_register(wrptr, 0x22, base);
+}
+
+/*
+ * DisplayLink HW has separate 16bpp and 8bpp framebuffers.
+ * In 24bpp modes, the low 323 RGB bits go in the 8bpp framebuffer
+ */
+static char *udl_set_base8bpp(char *wrptr, u32 base)
+{
+	wrptr = udl_set_register(wrptr, 0x26, base >> 16);
+	wrptr = udl_set_register(wrptr, 0x27, base >> 8);
+	return udl_set_register(wrptr, 0x28, base);
+}
+
+static char *udl_set_register_16(char *wrptr, u8 reg, u16 value)
+{
+	wrptr = udl_set_register(wrptr, reg, value >> 8);
+	return udl_set_register(wrptr, reg+1, value);
+}
+
+/*
+ * This is kind of weird because the controller takes some
+ * register values in a different byte order than other registers.
+ */
+static char *udl_set_register_16be(char *wrptr, u8 reg, u16 value)
+{
+	wrptr = udl_set_register(wrptr, reg, value);
+	return udl_set_register(wrptr, reg+1, value >> 8);
+}
+
+/*
+ * LFSR is linear feedback shift register. The reason we have this is
+ * because the display controller needs to minimize the clock depth of
+ * various counters used in the display path. So this code reverses the
+ * provided value into the lfsr16 value by counting backwards to get
+ * the value that needs to be set in the hardware comparator to get the
+ * same actual count. This makes sense once you read above a couple of
+ * times and think about it from a hardware perspective.
+ */
+static u16 udl_lfsr16(u16 actual_count)
+{
+	u32 lv = 0xFFFF; /* This is the lfsr value that the hw starts with */
+
+	while (actual_count--) {
+		lv =	 ((lv << 1) |
+			(((lv >> 15) ^ (lv >> 4) ^ (lv >> 2) ^ (lv >> 1)) & 1))
+			& 0xFFFF;
+	}
+
+	return (u16) lv;
+}
+
+/*
+ * This does LFSR conversion on the value that is to be written.
+ * See LFSR explanation above for more detail.
+ */
+static char *udl_set_register_lfsr16(char *wrptr, u8 reg, u16 value)
+{
+	return udl_set_register_16(wrptr, reg, udl_lfsr16(value));
+}
+
+/*
+ * This takes a standard fbdev screeninfo struct and all of its monitor mode
+ * details and converts them into the DisplayLink equivalent register commands.
+  ERR(vreg(dev,               0x00, (color_depth == 16) ? 0 : 1));
+  ERR(vreg_lfsr16(dev,        0x01, xDisplayStart));
+  ERR(vreg_lfsr16(dev,        0x03, xDisplayEnd));
+  ERR(vreg_lfsr16(dev,        0x05, yDisplayStart));
+  ERR(vreg_lfsr16(dev,        0x07, yDisplayEnd));
+  ERR(vreg_lfsr16(dev,        0x09, xEndCount));
+  ERR(vreg_lfsr16(dev,        0x0B, hSyncStart));
+  ERR(vreg_lfsr16(dev,        0x0D, hSyncEnd));
+  ERR(vreg_big_endian(dev,    0x0F, hPixels));
+  ERR(vreg_lfsr16(dev,        0x11, yEndCount));
+  ERR(vreg_lfsr16(dev,        0x13, vSyncStart));
+  ERR(vreg_lfsr16(dev,        0x15, vSyncEnd));
+  ERR(vreg_big_endian(dev,    0x17, vPixels));
+  ERR(vreg_little_endian(dev, 0x1B, pixelClock5KHz));
+
+  ERR(vreg(dev,               0x1F, 0));
+
+  ERR(vbuf(dev, WRITE_VIDREG_UNLOCK, DSIZEOF(WRITE_VIDREG_UNLOCK)));
+ */
+static char *udl_set_vid_cmds(char *wrptr, struct drm_display_mode *mode)
+{
+	u16 xds, yds;
+	u16 xde, yde;
+	u16 yec;
+
+	/* x display start */
+	xds = mode->crtc_htotal - mode->crtc_hsync_start;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x01, xds);
+	/* x display end */
+	xde = xds + mode->crtc_hdisplay;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x03, xde);
+
+	/* y display start */
+	yds = mode->crtc_vtotal - mode->crtc_vsync_start;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x05, yds);
+	/* y display end */
+	yde = yds + mode->crtc_vdisplay;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x07, yde);
+
+	/* x end count is active + blanking - 1 */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x09,
+					mode->crtc_htotal - 1);
+
+	/* libdlo hardcodes hsync start to 1 */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x0B, 1);
+
+	/* hsync end is width of sync pulse + 1 */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x0D,
+					mode->crtc_hsync_end - mode->crtc_hsync_start + 1);
+
+	/* hpixels is active pixels */
+	wrptr = udl_set_register_16(wrptr, 0x0F, mode->hdisplay);
+
+	/* yendcount is vertical active + vertical blanking */
+	yec = mode->crtc_vtotal;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x11, yec);
+
+	/* libdlo hardcodes vsync start to 0 */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x13, 0);
+
+	/* vsync end is width of vsync pulse */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x15, mode->crtc_vsync_end - mode->crtc_vsync_start);
+
+	/* vpixels is active pixels */
+	wrptr = udl_set_register_16(wrptr, 0x17, mode->crtc_vdisplay);
+
+	wrptr = udl_set_register_16be(wrptr, 0x1B,
+				      mode->clock / 5);
+
+	return wrptr;
+}
+
+static int udl_crtc_write_mode_to_hw(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct udl_device *udl = dev->dev_private;
+	struct urb *urb;
+	char *buf;
+	int retval;
+
+	urb = udl_get_urb(dev);
+	if (!urb)
+		return -ENOMEM;
+
+	buf = (char *)urb->transfer_buffer;
+
+	memcpy(buf, udl->mode_buf, udl->mode_buf_len);
+	retval = udl_submit_urb(dev, urb, udl->mode_buf_len);
+	DRM_INFO("write mode info %d\n", udl->mode_buf_len);
+	return retval;
+}
+
+
+static void udl_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct udl_device *udl = dev->dev_private;
+	int retval;
+
+	if (mode == DRM_MODE_DPMS_OFF) {
+		char *buf;
+		struct urb *urb;
+		urb = udl_get_urb(dev);
+		if (!urb)
+			return;
+
+		buf = (char *)urb->transfer_buffer;
+		buf = udl_vidreg_lock(buf);
+		buf = udl_enable_hvsync(buf, false);
+		buf = udl_vidreg_unlock(buf);
+
+		retval = udl_submit_urb(dev, urb, buf - (char *)
+					urb->transfer_buffer);
+	} else {
+		if (udl->mode_buf_len == 0) {
+			DRM_ERROR("Trying to enable DPMS with no mode\n");
+			return;
+		}
+		udl_crtc_write_mode_to_hw(crtc);
+	}
+
+}
+
+static bool udl_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+
+{
+	return true;
+}
+
+#if 0
+static int
+udl_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			   int x, int y, enum mode_set_atomic state)
+{
+	return 0;
+}
+
+static int
+udl_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+		    struct drm_framebuffer *old_fb)
+{
+	return 0;
+}
+#endif
+
+static int udl_crtc_mode_set(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode,
+			       int x, int y,
+			       struct drm_framebuffer *old_fb)
+
+{
+	struct drm_device *dev = crtc->dev;
+	struct udl_framebuffer *ufb = to_udl_fb(crtc->fb);
+	struct udl_device *udl = dev->dev_private;
+	char *buf;
+	char *wrptr;
+	int color_depth = 0;
+
+	buf = (char *)udl->mode_buf;
+
+	/* for now we just clip 24 -> 16 - if we fix that fix this */
+	/*if  (crtc->fb->bits_per_pixel != 16)
+	  color_depth = 1; */
+
+	/* This first section has to do with setting the base address on the
+	* controller * associated with the display. There are 2 base
+	* pointers, currently, we only * use the 16 bpp segment.
+	*/
+	wrptr = udl_vidreg_lock(buf);
+	wrptr = udl_set_color_depth(wrptr, color_depth);
+	/* set base for 16bpp segment to 0 */
+	wrptr = udl_set_base16bpp(wrptr, 0);
+	/* set base for 8bpp segment to end of fb */
+	wrptr = udl_set_base8bpp(wrptr, 2 * mode->vdisplay * mode->hdisplay);
+
+	wrptr = udl_set_vid_cmds(wrptr, adjusted_mode);
+	wrptr = udl_enable_hvsync(wrptr, true);
+	wrptr = udl_vidreg_unlock(wrptr);
+
+	ufb->active_16 = true;
+	if (old_fb) {
+		struct udl_framebuffer *uold_fb = to_udl_fb(old_fb);
+		uold_fb->active_16 = false;
+	}
+	udl->mode_buf_len = wrptr - buf;
+
+	/* damage all of it */
+	udl_handle_damage(ufb, 0, 0, ufb->base.width, ufb->base.height);
+	return 0;
+}
+
+
+static void udl_crtc_disable(struct drm_crtc *crtc)
+{
+
+
+}
+
+static void udl_crtc_destroy(struct drm_crtc *crtc)
+{
+	drm_crtc_cleanup(crtc);
+	kfree(crtc);
+}
+
+static void udl_load_lut(struct drm_crtc *crtc)
+{
+}
+
+static void udl_crtc_prepare(struct drm_crtc *crtc)
+{
+}
+
+static void udl_crtc_commit(struct drm_crtc *crtc)
+{
+	udl_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+static struct drm_crtc_helper_funcs udl_helper_funcs = {
+	.dpms = udl_crtc_dpms,
+	.mode_fixup = udl_crtc_mode_fixup,
+	.mode_set = udl_crtc_mode_set,
+	.prepare = udl_crtc_prepare,
+	.commit = udl_crtc_commit,
+	.disable = udl_crtc_disable,
+	.load_lut = udl_load_lut,
+};
+
+static const struct drm_crtc_funcs udl_crtc_funcs = {
+	.set_config = drm_crtc_helper_set_config,
+	.destroy = udl_crtc_destroy,
+};
+
+int udl_crtc_init(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+
+	crtc = kzalloc(sizeof(struct drm_crtc) + sizeof(struct drm_connector *), GFP_KERNEL);
+	if (crtc == NULL)
+		return -ENOMEM;
+
+	drm_crtc_init(dev, crtc, &udl_crtc_funcs);
+	drm_crtc_helper_add(crtc, &udl_helper_funcs);
+
+	return 0;
+}
+
+static const struct drm_mode_config_funcs udl_mode_funcs = {
+	.fb_create = udl_fb_user_fb_create,
+	.output_poll_changed = NULL,
+};
+
+int udl_modeset_init(struct drm_device *dev)
+{
+	struct drm_encoder *encoder;
+	drm_mode_config_init(dev);
+
+	dev->mode_config.min_width = 640;
+	dev->mode_config.min_height = 480;
+
+	dev->mode_config.max_width = 2048;
+	dev->mode_config.max_height = 2048;
+
+	dev->mode_config.prefer_shadow = 0;
+	dev->mode_config.preferred_depth = 24;
+
+	dev->mode_config.funcs = (void *)&udl_mode_funcs;
+
+	drm_mode_create_dirty_info_property(dev);
+
+	udl_crtc_init(dev);
+
+	encoder = udl_encoder_init(dev);
+
+	udl_connector_init(dev, encoder);
+
+	return 0;
+}
+
+void udl_modeset_cleanup(struct drm_device *dev)
+{
+	drm_mode_config_cleanup(dev);
+}