summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
diff options
context:
space:
mode:
authorZhao Yakui <yakui.zhao@intel.com>2009-10-10 10:42:37 +0800
committerEric Anholt <eric@anholt.net>2009-10-13 10:13:19 -0700
commita3e17eb8f4080a79738a938abe718be255247a44 (patch)
tree8778fe5730ef478477c300207bfece4ea347e598 /drivers/gpu
parent9216d44dc13b5e858253f06d83ceea25a9b72f4f (diff)
drm/i915: Set the LVDS_BORDER when using LVDS scaling mode
According to the spec the LVDS_BORDER_ENABLE bit decides whether the border data should be included in the active display and data sent to the panel. Border should be used when in VGA centered (un-scaled) mode or when scaling a 4:3 source image to a wide screen panel (typical 16:9). So when the LVDS scaling is used, decide whether the LVDS_BORDER should be enabled or not according to the current scaling mode. At the same time fix the typo error in LVDS center scaling mode. https://bugs.freedesktop.org/show_bug.cgi?id=23789 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> tested-by: Zhao Jian <jian.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Diffstat (limited to 'drivers/gpu')
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h2
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h2
-rw-r--r--drivers/gpu/drm/i915/intel_display.c2
-rw-r--r--drivers/gpu/drm/i915/intel_lvds.c10
4 files changed, 15 insertions, 1 deletions
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0094f185e17..17be01e351b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -492,6 +492,8 @@ typedef struct drm_i915_private {
struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
} mm;
struct sdvo_device_mapping sdvo_mappings[2];
+ /* indicate whether the LVDS_BORDER should be enabled or not */
+ unsigned int lvds_border_bits;
/* Reclocking support */
bool render_reclock_avail;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0466ddbeba3..5f9272459b7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -968,6 +968,8 @@
#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
+/* Enable border for unscaled (or aspect-scaled) display */
+#define LVDS_BORDER_ENABLE (1 << 15)
/*
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
* pixel.
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3c14240cc00..9efe11761be 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2936,6 +2936,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
lvds = I915_READ(lvds_reg);
lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
+ /* set the corresponsding LVDS_BORDER bit */
+ lvds |= dev_priv->lvds_border_bits;
/* Set the B0-B3 data pairs corresponding to whether we're going to
* set the DPLLs for dual-channel mode or not.
*/
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 98ae3d73577..089f18c66dd 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -380,7 +380,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
adjusted_mode->crtc_vblank_start + vsync_pos;
/* keep the vsync width constant */
adjusted_mode->crtc_vsync_end =
- adjusted_mode->crtc_vblank_start + vsync_width;
+ adjusted_mode->crtc_vsync_start + vsync_width;
border = 1;
break;
case DRM_MODE_SCALE_ASPECT:
@@ -526,6 +526,14 @@ out:
lvds_priv->pfit_control = pfit_control;
lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
/*
+ * When there exists the border, it means that the LVDS_BORDR
+ * should be enabled.
+ */
+ if (border)
+ dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE;
+ else
+ dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE);
+ /*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
* user's requested refresh rate.