HID: usbhid: add always-poll quirk

Add quirk to make sure that a device is always polled for input events
even if it hasn't been opened.

This is needed for devices that disconnects from the bus unless the
interrupt endpoint has been polled at least once or when not responding
to an input event (e.g. after having shut down X).

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

1 files changed, 23 insertions, 3 deletions

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 79cf503e37b..ddd547ad6d7 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -82,7 +82,7 @@ static int hid_start_in(struct hid_device *hid)
 	struct usbhid_device *usbhid = hid->driver_data;
 
 	spin_lock_irqsave(&usbhid->lock, flags);
-	if (hid->open > 0 &&
+	if ((hid->open > 0 || hid->quirks & HID_QUIRK_ALWAYS_POLL) &&
 			!test_bit(HID_DISCONNECTED, &usbhid->iofl) &&
 			!test_bit(HID_SUSPENDED, &usbhid->iofl) &&
 			!test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
@@ -292,6 +292,8 @@ static void hid_irq_in(struct urb *urb)
 	case 0:			/* success */
 		usbhid_mark_busy(usbhid);
 		usbhid->retry_delay = 0;
+		if ((hid->quirks & HID_QUIRK_ALWAYS_POLL) && !hid->open)
+			break;
 		hid_input_report(urb->context, HID_INPUT_REPORT,
 				 urb->transfer_buffer,
 				 urb->actual_length, 1);
@@ -735,8 +737,10 @@ void usbhid_close(struct hid_device *hid)
 	if (!--hid->open) {
 		spin_unlock_irq(&usbhid->lock);
 		hid_cancel_delayed_stuff(usbhid);
-		usb_kill_urb(usbhid->urbin);
-		usbhid->intf->needs_remote_wakeup = 0;
+		if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) {
+			usb_kill_urb(usbhid->urbin);
+			usbhid->intf->needs_remote_wakeup = 0;
+		}
 	} else {
 		spin_unlock_irq(&usbhid->lock);
 	}
@@ -1134,6 +1138,19 @@ static int usbhid_start(struct hid_device *hid)
 
 	set_bit(HID_STARTED, &usbhid->iofl);
 
+	if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
+		ret = usb_autopm_get_interface(usbhid->intf);
+		if (ret)
+			goto fail;
+		usbhid->intf->needs_remote_wakeup = 1;
+		ret = hid_start_in(hid);
+		if (ret) {
+			dev_err(&hid->dev,
+				"failed to start in urb: %d\n", ret);
+		}
+		usb_autopm_put_interface(usbhid->intf);
+	}
+
 	/* Some keyboards don't work until their LEDs have been set.
 	 * Since BIOSes do set the LEDs, it must be safe for any device
 	 * that supports the keyboard boot protocol.
@@ -1166,6 +1183,9 @@ static void usbhid_stop(struct hid_device *hid)
 	if (WARN_ON(!usbhid))
 		return;
 
+	if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
+		usbhid->intf->needs_remote_wakeup = 0;
+
 	clear_bit(HID_STARTED, &usbhid->iofl);
 	spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);