Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (coretemp) Fix checkpatch errors
  hwmon: Remove pkgtemp driver
  hwmon: (coretemp) Merge pkgtemp with coretemp
  hwmon: (pmbus) Add support for Analog Devices ADM1275
  hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers
  hwmon: (pmbus) Add support for TI UCD9200 series of PWM System Controllers
  hwmon: (pmbus) Use device specific function to read fan configuration
  hwmon: (pmbus) Expand scope of device specific get_status function
  hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers
  hwmon: Driver for MAX16065 System Manager and compatibles
  hwmon: (sht15) add support for CRC validation
  hwmon: (sht15) add support for the status register
  hwmon: (sht15) clean-up the probe function
  hwmon: (sht15) general code clean-up
  hwmon: Add support for MAX6642

1 files changed, 59 insertions, 7 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 50e40dbd8bb..43221beb9e9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -408,13 +408,6 @@ config SENSORS_CORETEMP
 	  sensor inside your CPU. Most of the family 6 CPUs
 	  are supported. Check Documentation/hwmon/coretemp for details.
 
-config SENSORS_PKGTEMP
-	tristate "Intel processor package temperature sensor"
-	depends on X86 && EXPERIMENTAL
-	help
-	  If you say yes here you get support for the package level temperature
-	  sensor inside your CPU. Check documentation/driver for details.
-
 config SENSORS_IBMAEM
 	tristate "IBM Active Energy Manager temperature/power sensors and control"
 	select IPMI_SI
@@ -708,6 +701,22 @@ config SENSORS_MAX1111
 	  This driver can also be built as a module.  If so, the module
 	  will be called max1111.
 
+config SENSORS_MAX16065
+	tristate "Maxim MAX16065 System Manager and compatibles"
+	depends on I2C
+	help
+	  If you say yes here you get support for hardware monitoring
+	  capabilities of the following Maxim System Manager chips.
+	    MAX16065
+	    MAX16066
+	    MAX16067
+	    MAX16068
+	    MAX16070
+	    MAX16071
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max16065.
+
 config SENSORS_MAX1619
 	tristate "Maxim MAX1619 sensor chip"
 	depends on I2C
@@ -727,6 +736,17 @@ config SENSORS_MAX6639
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6639.
 
+config SENSORS_MAX6642
+	tristate "Maxim MAX6642 sensor chip"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for MAX6642 sensor chip.
+	  MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
+	  with Overtemperature Alarm from Maxim.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max6642.
+
 config SENSORS_MAX6650
 	tristate "Maxim MAX6650 sensor chip"
 	depends on I2C && EXPERIMENTAL
@@ -800,6 +820,16 @@ config SENSORS_PMBUS
 	  This driver can also be built as a module. If so, the module will
 	  be called pmbus.
 
+config SENSORS_ADM1275
+	tristate "Analog Devices ADM1275"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Analog
+	  Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called adm1275.
+
 config SENSORS_MAX16064
 	tristate "Maxim MAX16064"
 	default n
@@ -830,6 +860,28 @@ config SENSORS_MAX8688
 	  This driver can also be built as a module. If so, the module will
 	  be called max8688.
 
+config SENSORS_UCD9000
+	tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
+	  Controllers.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ucd9000.
+
+config SENSORS_UCD9200
+	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+	  Digital PWM System Controllers.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ucd9200.
+
 endif # PMBUS
 
 config SENSORS_SHT15