Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
  hwmon: Remove the deprecated adt7473 driver
  hwmon: Fix off-by-one kind values
  hwmon: (tmp421) Fix temperature conversions
  hwmon: (tmp421) Restore missing inputs
  hwmon: Driver for Andigilog aSC7621 family monitoring chips
  hwmon: (adt7411) Improve locking
  hwmon: Add driver for ADT7411 voltage and temperature sensor
  hwmon: (w83793) Add watchdog functionality
  hwmon: (g760a) Make rpm_from_cnt static
  hwmon: (it87) Validate auto pwm settings
  hwmon: (it87) Add support for old automatic fan speed control
  hwmon: (it87) Drop dead web links in documentation
  hwmon: (it87) Add an entry in MAINTAINERS
  hwmon: (it87) Use strict_strtol instead of simple_strtol
  hwmon: (it87) Fix many checkpatch errors and warnings
  hwmon: (it87) Add support for beep on alarm
  hwmon: (it87) Create vid attributes by group
  hwmon: (it87) Refactor attributes creation and removal
  hwmon: (it87) Expose the PWM/temperature mappings
  hwmon: (it87) Display fan outputs in automatic mode as such
  ...

12 files changed, 2923 insertions, 1484 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 68cf87749a4..e4595e6147b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -170,6 +170,16 @@ config SENSORS_ADM9240
 	  This driver can also be built as a module.  If so, the module
 	  will be called adm9240.
 
+config SENSORS_ADT7411
+	tristate "Analog Devices ADT7411"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  ADT7411 voltage and temperature monitoring chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called adt7411.
+
 config SENSORS_ADT7462
 	tristate "Analog Devices ADT7462"
 	depends on I2C && EXPERIMENTAL
@@ -190,20 +200,6 @@ config SENSORS_ADT7470
 	  This driver can also be built as a module. If so, the module
 	  will be called adt7470.
 
-config SENSORS_ADT7473
-	tristate "Analog Devices ADT7473 (DEPRECATED)"
-	depends on I2C && EXPERIMENTAL
-	select SENSORS_ADT7475
-	help
-	  If you say yes here you get support for the Analog Devices
-	  ADT7473 temperature monitoring chips.
-
-	  This driver is deprecated, you should use the adt7475 driver
-	  instead.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called adt7473.
-
 config SENSORS_ADT7475
 	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 	depends on I2C && EXPERIMENTAL
@@ -216,6 +212,19 @@ config SENSORS_ADT7475
 	  This driver can also be build as a module.  If so, the module
 	  will be called adt7475.
 
+config SENSORS_ASC7621
+	tristate "Andigilog aSC7621"
+	depends on HWMON && I2C
+	help
+	  If you say yes here you get support for the aSC7621
+	  family of SMBus sensors chip found on most Intel X48, X38, 975,
+	  965 and 945 desktop boards.  Currently supported chips:
+	  aSC7621
+	  aSC7621a
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called asc7621.
+
 config SENSORS_K8TEMP
 	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 	depends on X86 && PCI && EXPERIMENTAL
@@ -563,9 +572,10 @@ config SENSORS_LM90
 	depends on I2C
 	help
 	  If you say yes here you get support for National Semiconductor LM90,
-	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
 	  MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
-	  MAX6680, MAX6681 and MAX6692 sensor chips.
+	  MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
+	  sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
@@ -909,7 +919,8 @@ config SENSORS_W83793
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the Winbond W83793
-	  hardware monitoring chip.
+	  hardware monitoring chip, including support for the integrated
+	  watchdog.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83793.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 4bc215c0953..4aa1a3d112a 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -29,12 +29,13 @@ obj-$(CONFIG_SENSORS_ADM1029)	+= adm1029.o
 obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
 obj-$(CONFIG_SENSORS_ADS7828)	+= ads7828.o
+obj-$(CONFIG_SENSORS_ADT7411)	+= adt7411.o
 obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
-obj-$(CONFIG_SENSORS_ADT7473)	+= adt7473.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
+obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
new file mode 100644
index 00000000000..3471884e42d
--- /dev/null
+++ b/drivers/hwmon/adt7411.c
@@ -0,0 +1,366 @@
+/*
+ *  Driver for the ADT7411 (I2C/SPI 8 channel 10 bit ADC & temperature-sensor)
+ *
+ *  Copyright (C) 2008, 2010 Pengutronix
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  TODO: SPI, support for external temperature sensor
+ * 	  use power-down mode for suspend?, interrupt handling?
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#define ADT7411_REG_INT_TEMP_VDD_LSB		0x03
+#define ADT7411_REG_EXT_TEMP_AIN14_LSB		0x04
+#define ADT7411_REG_VDD_MSB			0x06
+#define ADT7411_REG_INT_TEMP_MSB		0x07
+#define ADT7411_REG_EXT_TEMP_AIN1_MSB		0x08
+
+#define ADT7411_REG_CFG1			0x18
+#define ADT7411_CFG1_START_MONITOR		(1 << 0)
+
+#define ADT7411_REG_CFG2			0x19
+#define ADT7411_CFG2_DISABLE_AVG		(1 << 5)
+
+#define ADT7411_REG_CFG3			0x1a
+#define ADT7411_CFG3_ADC_CLK_225		(1 << 0)
+#define ADT7411_CFG3_REF_VDD			(1 << 4)
+
+#define ADT7411_REG_DEVICE_ID			0x4d
+#define ADT7411_REG_MANUFACTURER_ID		0x4e
+
+#define ADT7411_DEVICE_ID			0x2
+#define ADT7411_MANUFACTURER_ID			0x41
+
+static const unsigned short normal_i2c[] = { 0x48, 0x4a, 0x4b, I2C_CLIENT_END };
+
+struct adt7411_data {
+	struct mutex device_lock;	/* for "atomic" device accesses */
+	struct mutex update_lock;
+	unsigned long next_update;
+	int vref_cached;
+	struct device *hwmon_dev;
+};
+
+/*
+ * When reading a register containing (up to 4) lsb, all associated
+ * msb-registers get locked by the hardware. After _one_ of those msb is read,
+ * _all_ are unlocked. In order to use this locking correctly, reading lsb/msb
+ * is protected here with a mutex, too.
+ */
+static int adt7411_read_10_bit(struct i2c_client *client, u8 lsb_reg,
+				u8 msb_reg, u8 lsb_shift)
+{
+	struct adt7411_data *data = i2c_get_clientdata(client);
+	int val, tmp;
+
+	mutex_lock(&data->device_lock);
+
+	val = i2c_smbus_read_byte_data(client, lsb_reg);
+	if (val < 0)
+		goto exit_unlock;
+
+	tmp = (val >> lsb_shift) & 3;
+	val = i2c_smbus_read_byte_data(client, msb_reg);
+
+	if (val >= 0)
+		val = (val << 2) | tmp;
+
+ exit_unlock:
+	mutex_unlock(&data->device_lock);
+
+	return val;
+}
+
+static int adt7411_modify_bit(struct i2c_client *client, u8 reg, u8 bit,
+				bool flag)
+{
+	struct adt7411_data *data = i2c_get_clientdata(client);
+	int ret, val;
+
+	mutex_lock(&data->device_lock);
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		goto exit_unlock;
+
+	if (flag)
+		val = ret | bit;
+	else
+		val = ret & ~bit;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ exit_unlock:
+	mutex_unlock(&data->device_lock);
+	return ret;
+}
+
+static ssize_t adt7411_show_vdd(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = adt7411_read_10_bit(client, ADT7411_REG_INT_TEMP_VDD_LSB,
+			ADT7411_REG_VDD_MSB, 2);
+
+	return ret < 0 ? ret : sprintf(buf, "%u\n", ret * 7000 / 1024);
+}
+
+static ssize_t adt7411_show_temp(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val = adt7411_read_10_bit(client, ADT7411_REG_INT_TEMP_VDD_LSB,
+			ADT7411_REG_INT_TEMP_MSB, 0);
+
+	if (val < 0)
+		return val;
+
+	val = val & 0x200 ? val - 0x400 : val; /* 10 bit signed */
+
+	return sprintf(buf, "%d\n", val * 250);
+}
+
+static ssize_t adt7411_show_input(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7411_data *data = i2c_get_clientdata(client);
+	int val;
+	u8 lsb_reg, lsb_shift;
+
+	mutex_lock(&data->update_lock);
+	if (time_after_eq(jiffies, data->next_update)) {
+		val = i2c_smbus_read_byte_data(client, ADT7411_REG_CFG3);
+		if (val < 0)
+			goto exit_unlock;
+
+		if (val & ADT7411_CFG3_REF_VDD) {
+			val = adt7411_read_10_bit(client,
+					ADT7411_REG_INT_TEMP_VDD_LSB,
+					ADT7411_REG_VDD_MSB, 2);
+			if (val < 0)
+				goto exit_unlock;
+
+			data->vref_cached = val * 7000 / 1024;
+		} else {
+			data->vref_cached = 2250;
+		}
+
+		data->next_update = jiffies + HZ;
+	}
+
+	lsb_reg = ADT7411_REG_EXT_TEMP_AIN14_LSB + (nr >> 2);
+	lsb_shift = 2 * (nr & 0x03);
+	val = adt7411_read_10_bit(client, lsb_reg,
+			ADT7411_REG_EXT_TEMP_AIN1_MSB + nr, lsb_shift);
+	if (val < 0)
+		goto exit_unlock;
+
+	val = sprintf(buf, "%u\n", val * data->vref_cached / 1024);
+ exit_unlock:
+	mutex_unlock(&data->update_lock);
+	return val;
+}
+
+static ssize_t adt7411_show_bit(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = i2c_smbus_read_byte_data(client, attr2->index);
+
+	return ret < 0 ? ret : sprintf(buf, "%u\n", !!(ret & attr2->nr));
+}
+
+static ssize_t adt7411_set_bit(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct sensor_device_attribute_2 *s_attr2 = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7411_data *data = i2c_get_clientdata(client);
+	int ret;
+	unsigned long flag;
+
+	ret = strict_strtoul(buf, 0, &flag);
+	if (ret || flag > 1)
+		return -EINVAL;
+
+	ret = adt7411_modify_bit(client, s_attr2->index, s_attr2->nr, flag);
+
+	/* force update */
+	mutex_lock(&data->update_lock);
+	data->next_update = jiffies;
+	mutex_unlock(&data->update_lock);
+
+	return ret < 0 ? ret : count;
+}
+
+#define ADT7411_BIT_ATTR(__name, __reg, __bit) \
+	SENSOR_DEVICE_ATTR_2(__name, S_IRUGO | S_IWUSR, adt7411_show_bit, \
+	adt7411_set_bit, __bit, __reg)
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, adt7411_show_temp, NULL);
+static DEVICE_ATTR(in0_input, S_IRUGO, adt7411_show_vdd, NULL);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, adt7411_show_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, adt7411_show_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, adt7411_show_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, adt7411_show_input, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, adt7411_show_input, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, adt7411_show_input, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, adt7411_show_input, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, adt7411_show_input, NULL, 7);
+static ADT7411_BIT_ATTR(no_average, ADT7411_REG_CFG2, ADT7411_CFG2_DISABLE_AVG);
+static ADT7411_BIT_ATTR(fast_sampling, ADT7411_REG_CFG3, ADT7411_CFG3_ADC_CLK_225);
+static ADT7411_BIT_ATTR(adc_ref_vdd, ADT7411_REG_CFG3, ADT7411_CFG3_REF_VDD);
+
+static struct attribute *adt7411_attrs[] = {
+	&dev_attr_temp1_input.attr,
+	&dev_attr_in0_input.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in8_input.dev_attr.attr,
+	&sensor_dev_attr_no_average.dev_attr.attr,
+	&sensor_dev_attr_fast_sampling.dev_attr.attr,
+	&sensor_dev_attr_adc_ref_vdd.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group adt7411_attr_grp = {
+	.attrs = adt7411_attrs,
+};
+
+static int adt7411_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	int val;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	val = i2c_smbus_read_byte_data(client, ADT7411_REG_MANUFACTURER_ID);
+	if (val < 0 || val != ADT7411_MANUFACTURER_ID) {
+		dev_dbg(&client->dev, "Wrong manufacturer ID. Got %d, "
+			"expected %d\n", val, ADT7411_MANUFACTURER_ID);
+		return -ENODEV;
+	}
+
+	val = i2c_smbus_read_byte_data(client, ADT7411_REG_DEVICE_ID);
+	if (val < 0 || val != ADT7411_DEVICE_ID) {
+		dev_dbg(&client->dev, "Wrong device ID. Got %d, "
+			"expected %d\n", val, ADT7411_DEVICE_ID);
+		return -ENODEV;
+	}
+
+	strlcpy(info->type, "adt7411", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int __devinit adt7411_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct adt7411_data *data;
+	int ret;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->device_lock);
+	mutex_init(&data->update_lock);
+
+	ret = adt7411_modify_bit(client, ADT7411_REG_CFG1,
+				 ADT7411_CFG1_START_MONITOR, 1);
+	if (ret < 0)
+		goto exit_free;
+
+	/* force update on first occasion */
+	data->next_update = jiffies;
+
+	ret = sysfs_create_group(&client->dev.kobj, &adt7411_attr_grp);
+	if (ret)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	dev_info(&client->dev, "successfully registered\n");
+
+	return 0;
+
+ exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &adt7411_attr_grp);
+ exit_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return ret;
+}
+
+static int __devexit adt7411_remove(struct i2c_client *client)
+{
+	struct adt7411_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &adt7411_attr_grp);
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id adt7411_id[] = {
+	{ "adt7411", 0 },
+	{ }
+};
+
+static struct i2c_driver adt7411_driver = {
+	.driver		= {
+		.name		= "adt7411",
+	},
+	.probe  = adt7411_probe,
+	.remove	= __devexit_p(adt7411_remove),
+	.id_table = adt7411_id,
+	.detect = adt7411_detect,
+	.address_list = normal_i2c,
+	.class = I2C_CLASS_HWMON,
+};
+
+static int __init sensors_adt7411_init(void)
+{
+	return i2c_add_driver(&adt7411_driver);
+}
+module_init(sensors_adt7411_init)
+
+static void __exit sensors_adt7411_exit(void)
+{
+	i2c_del_driver(&adt7411_driver);
+}
+module_exit(sensors_adt7411_exit)
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de> and "
+	"Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_DESCRIPTION("ADT7411 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
deleted file mode 100644
index 434576f61c8..00000000000
--- a/drivers/hwmon/adt7473.c
+++ /dev/null
@@ -1,1180 +0,0 @@
-/*
- * A hwmon driver for the Analog Devices ADT7473
- * Copyright (C) 2007 IBM
- *
- * Author: Darrick J. Wong <djwong@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/log2.h>
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x2C, 0x2D, 0x2E, I2C_CLIENT_END };
-
-/* ADT7473 registers */
-#define ADT7473_REG_BASE_ADDR			0x20
-
-#define ADT7473_REG_VOLT_BASE_ADDR		0x21
-#define ADT7473_REG_VOLT_MIN_BASE_ADDR		0x46
-
-#define ADT7473_REG_TEMP_BASE_ADDR		0x25
-#define ADT7473_REG_TEMP_LIMITS_BASE_ADDR	0x4E
-#define ADT7473_REG_TEMP_TMIN_BASE_ADDR		0x67
-#define ADT7473_REG_TEMP_TMAX_BASE_ADDR		0x6A
-
-#define ADT7473_REG_FAN_BASE_ADDR		0x28
-#define ADT7473_REG_FAN_MIN_BASE_ADDR		0x54
-
-#define ADT7473_REG_PWM_BASE_ADDR		0x30
-#define	ADT7473_REG_PWM_MIN_BASE_ADDR		0x64
-#define ADT7473_REG_PWM_MAX_BASE_ADDR		0x38
-#define ADT7473_REG_PWM_BHVR_BASE_ADDR		0x5C
-#define		ADT7473_PWM_BHVR_MASK		0xE0
-#define		ADT7473_PWM_BHVR_SHIFT		5
-
-#define ADT7473_REG_CFG1			0x40
-#define 	ADT7473_CFG1_START		0x01
-#define		ADT7473_CFG1_READY		0x04
-#define ADT7473_REG_CFG2			0x73
-#define ADT7473_REG_CFG3			0x78
-#define ADT7473_REG_CFG4			0x7D
-#define		ADT7473_CFG4_MAX_DUTY_AT_OVT	0x08
-#define ADT7473_REG_CFG5			0x7C
-#define		ADT7473_CFG5_TEMP_TWOS		0x01
-#define		ADT7473_CFG5_TEMP_OFFSET	0x02
-
-#define ADT7473_REG_DEVICE			0x3D
-#define 	ADT7473_VENDOR			0x41
-#define ADT7473_REG_VENDOR			0x3E
-#define 	ADT7473_DEVICE			0x73
-#define ADT7473_REG_REVISION			0x3F
-#define 	ADT7473_REV_68			0x68
-#define 	ADT7473_REV_69			0x69
-
-#define ADT7473_REG_ALARM1			0x41
-#define		ADT7473_VCCP_ALARM		0x02
-#define		ADT7473_VCC_ALARM		0x04
-#define		ADT7473_R1T_ALARM		0x10
-#define		ADT7473_LT_ALARM		0x20
-#define		ADT7473_R2T_ALARM		0x40
-#define		ADT7473_OOL			0x80
-#define ADT7473_REG_ALARM2			0x42
-#define		ADT7473_OVT_ALARM		0x02
-#define		ADT7473_FAN1_ALARM		0x04
-#define		ADT7473_FAN2_ALARM		0x08
-#define		ADT7473_FAN3_ALARM		0x10
-#define		ADT7473_FAN4_ALARM		0x20
-#define		ADT7473_R1T_SHORT		0x40
-#define		ADT7473_R2T_SHORT		0x80
-
-#define ALARM2(x)	((x) << 8)
-
-#define ADT7473_VOLT_COUNT	2
-#define ADT7473_REG_VOLT(x)	(ADT7473_REG_VOLT_BASE_ADDR + (x))
-#define ADT7473_REG_VOLT_MIN(x)	(ADT7473_REG_VOLT_MIN_BASE_ADDR + ((x) * 2))
-#define ADT7473_REG_VOLT_MAX(x)	(ADT7473_REG_VOLT_MIN_BASE_ADDR + \
-				((x) * 2) + 1)
-
-#define ADT7473_TEMP_COUNT	3
-#define ADT7473_REG_TEMP(x)	(ADT7473_REG_TEMP_BASE_ADDR + (x))
-#define ADT7473_REG_TEMP_MIN(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2))
-#define ADT7473_REG_TEMP_MAX(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + \
-				((x) * 2) + 1)
-#define ADT7473_REG_TEMP_TMIN(x)	(ADT7473_REG_TEMP_TMIN_BASE_ADDR + (x))
-#define ADT7473_REG_TEMP_TMAX(x)	(ADT7473_REG_TEMP_TMAX_BASE_ADDR + (x))
-
-#define ADT7473_FAN_COUNT	4
-#define ADT7473_REG_FAN(x)	(ADT7473_REG_FAN_BASE_ADDR + ((x) * 2))
-#define ADT7473_REG_FAN_MIN(x)	(ADT7473_REG_FAN_MIN_BASE_ADDR + ((x) * 2))
-
-#define ADT7473_PWM_COUNT	3
-#define ADT7473_REG_PWM(x)	(ADT7473_REG_PWM_BASE_ADDR + (x))
-#define ADT7473_REG_PWM_MAX(x)	(ADT7473_REG_PWM_MAX_BASE_ADDR + (x))
-#define ADT7473_REG_PWM_MIN(x)	(ADT7473_REG_PWM_MIN_BASE_ADDR + (x))
-#define ADT7473_REG_PWM_BHVR(x)	(ADT7473_REG_PWM_BHVR_BASE_ADDR + (x))
-
-/* How often do we reread sensors values? (In jiffies) */
-#define SENSOR_REFRESH_INTERVAL	(2 * HZ)
-
-/* How often do we reread sensor limit values? (In jiffies) */
-#define LIMIT_REFRESH_INTERVAL	(60 * HZ)
-
-/* datasheet says to divide this number by the fan reading to get fan rpm */
-#define FAN_PERIOD_TO_RPM(x)	((90000 * 60) / (x))
-#define FAN_RPM_TO_PERIOD	FAN_PERIOD_TO_RPM
-#define FAN_PERIOD_INVALID	65535
-#define FAN_DATA_VALID(x)	((x) && (x) != FAN_PERIOD_INVALID)
-
-struct adt7473_data {
-	struct device		*hwmon_dev;
-	struct attribute_group	attrs;
-	struct mutex		lock;
-	char			sensors_valid;
-	char			limits_valid;
-	unsigned long		sensors_last_updated;	/* In jiffies */
-	unsigned long		limits_last_updated;	/* In jiffies */
-
-	u8			volt[ADT7473_VOLT_COUNT];
-	s8			volt_min[ADT7473_VOLT_COUNT];
-	s8			volt_max[ADT7473_VOLT_COUNT];
-
-	s8			temp[ADT7473_TEMP_COUNT];
-	s8			temp_min[ADT7473_TEMP_COUNT];
-	s8			temp_max[ADT7473_TEMP_COUNT];
-	s8			temp_tmin[ADT7473_TEMP_COUNT];
-	/* This is called the !THERM limit in the datasheet */
-	s8			temp_tmax[ADT7473_TEMP_COUNT];
-
-	u16			fan[ADT7473_FAN_COUNT];
-	u16			fan_min[ADT7473_FAN_COUNT];
-
-	u8			pwm[ADT7473_PWM_COUNT];
-	u8			pwm_max[ADT7473_PWM_COUNT];
-	u8			pwm_min[ADT7473_PWM_COUNT];
-	u8			pwm_behavior[ADT7473_PWM_COUNT];
-
-	u8			temp_twos_complement;
-	u8			temp_offset;
-
-	u16			alarm;
-	u8			max_duty_at_overheat;
-};
-
-static int adt7473_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id);
-static int adt7473_detect(struct i2c_client *client,
-			  struct i2c_board_info *info);
-static int adt7473_remove(struct i2c_client *client);
-
-static const struct i2c_device_id adt7473_id[] = {
-	{ "adt7473", 0 },
-	{ }
-};
-
-static struct i2c_driver adt7473_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "adt7473",
-	},
-	.probe		= adt7473_probe,
-	.remove		= adt7473_remove,
-	.id_table	= adt7473_id,
-	.detect		= adt7473_detect,
-	.address_list	= normal_i2c,
-};
-
-/*
- * 16-bit registers on the ADT7473 are low-byte first.  The data sheet says
- * that the low byte must be read before the high byte.
- */
-static inline int adt7473_read_word_data(struct i2c_client *client, u8 reg)
-{
-	u16 foo;
-	foo = i2c_smbus_read_byte_data(client, reg);
-	foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
-	return foo;
-}
-
-static inline int adt7473_write_word_data(struct i2c_client *client, u8 reg,
-					  u16 value)
-{
-	return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
-	       && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
-}
-
-static void adt7473_init_client(struct i2c_client *client)
-{
-	int reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG1);
-
-	if (!(reg & ADT7473_CFG1_READY)) {
-		dev_err(&client->dev, "Chip not ready.\n");
-	} else {
-		/* start monitoring */
-		i2c_smbus_write_byte_data(client, ADT7473_REG_CFG1,
-					  reg | ADT7473_CFG1_START);
-	}
-}
-
-static struct adt7473_data *adt7473_update_device(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	unsigned long local_jiffies = jiffies;
-	u8 cfg;
-	int i;
-
-	mutex_lock(&data->lock);
-	if (time_before(local_jiffies, data->sensors_last_updated +
-		SENSOR_REFRESH_INTERVAL)
-		&& data->sensors_valid)
-		goto no_sensor_update;
-
-	for (i = 0; i < ADT7473_VOLT_COUNT; i++)
-		data->volt[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_VOLT(i));
-
-	/* Determine temperature encoding */
-	cfg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG5);
-	data->temp_twos_complement = (cfg & ADT7473_CFG5_TEMP_TWOS);
-
-	/*
-	 * What does this do? it implies a variable temperature sensor
-	 * offset, but the datasheet doesn't say anything about this bit
-	 * and other parts of the datasheet imply that "offset64" mode
-	 * means that you shift temp values by -64 if the above bit was set.
-	 */
-	data->temp_offset = (cfg & ADT7473_CFG5_TEMP_OFFSET);
-
-	for (i = 0; i < ADT7473_TEMP_COUNT; i++)
-		data->temp[i] = i2c_smbus_read_byte_data(client,
-							 ADT7473_REG_TEMP(i));
-
-	for (i = 0; i < ADT7473_FAN_COUNT; i++)
-		data->fan[i] = adt7473_read_word_data(client,
-						ADT7473_REG_FAN(i));
-
-	for (i = 0; i < ADT7473_PWM_COUNT; i++)
-		data->pwm[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_PWM(i));
-
-	data->alarm = i2c_smbus_read_byte_data(client, ADT7473_REG_ALARM1);
-	if (data->alarm & ADT7473_OOL)
-		data->alarm |= ALARM2(i2c_smbus_read_byte_data(client,
-							 ADT7473_REG_ALARM2));
-
-	data->sensors_last_updated = local_jiffies;
-	data->sensors_valid = 1;
-
-no_sensor_update:
-	if (time_before(local_jiffies, data->limits_last_updated +
-		LIMIT_REFRESH_INTERVAL)
-		&& data->limits_valid)
-		goto out;
-
-	for (i = 0; i < ADT7473_VOLT_COUNT; i++) {
-		data->volt_min[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_VOLT_MIN(i));
-		data->volt_max[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_VOLT_MAX(i));
-	}
-
-	for (i = 0; i < ADT7473_TEMP_COUNT; i++) {
-		data->temp_min[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_TEMP_MIN(i));
-		data->temp_max[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_TEMP_MAX(i));
-		data->temp_tmin[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_TEMP_TMIN(i));
-		data->temp_tmax[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_TEMP_TMAX(i));
-	}
-
-	for (i = 0; i < ADT7473_FAN_COUNT; i++)
-		data->fan_min[i] = adt7473_read_word_data(client,
-						ADT7473_REG_FAN_MIN(i));
-
-	for (i = 0; i < ADT7473_PWM_COUNT; i++) {
-		data->pwm_max[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_PWM_MAX(i));
-		data->pwm_min[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_PWM_MIN(i));
-		data->pwm_behavior[i] = i2c_smbus_read_byte_data(client,
-						ADT7473_REG_PWM_BHVR(i));
-	}
-
-	i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
-	data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT);
-
-	data->limits_last_updated = local_jiffies;
-	data->limits_valid = 1;
-
-out:
-	mutex_unlock(&data->lock);
-	return data;
-}
-
-/*
- * Conversions
- */
-
-/* IN are scaled acording to built-in resistors */
-static const int adt7473_scaling[] = {  /* .001 Volts */
-	2250, 3300
-};
-#define SCALE(val, from, to)	(((val) * (to) + ((from) / 2)) / (from))
-
-static int decode_volt(int volt_index, u8 raw)
-{
-	return SCALE(raw, 192, adt7473_scaling[volt_index]);
-}
-
-static u8 encode_volt(int volt_index, int cooked)
-{
-	int raw = SCALE(cooked, adt7473_scaling[volt_index], 192);
-	return SENSORS_LIMIT(raw, 0, 255);
-}
-
-static ssize_t show_volt_min(struct device *dev,
-			     struct device_attribute *devattr,
-			     char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n",
-		       decode_volt(attr->index, data->volt_min[attr->index]));
-}
-
-static ssize_t set_volt_min(struct device *dev,
-			    struct device_attribute *devattr,
-			    const char *buf,
-			    size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long volt;
-
-	if (strict_strtol(buf, 10, &volt))
-		return -EINVAL;
-
-	volt = encode_volt(attr->index, volt);
-
-	mutex_lock(&data->lock);
-	data->volt_min[attr->index] = volt;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MIN(attr->index),
-				  volt);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_volt_max(struct device *dev,
-			     struct device_attribute *devattr,
-			     char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n",
-		       decode_volt(attr->index, data->volt_max[attr->index]));
-}
-
-static ssize_t set_volt_max(struct device *dev,
-			    struct device_attribute *devattr,
-			    const char *buf,
-			    size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long volt;
-
-	if (strict_strtol(buf, 10, &volt))
-		return -EINVAL;
-
-	volt = encode_volt(attr->index, volt);
-
-	mutex_lock(&data->lock);
-	data->volt_max[attr->index] = volt;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MAX(attr->index),
-				  volt);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_volt(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-
-	return sprintf(buf, "%d\n",
-		       decode_volt(attr->index, data->volt[attr->index]));
-}
-
-/*
- * This chip can report temperature data either as a two's complement
- * number in the range -128 to 127, or as an unsigned number that must
- * be offset by 64.
- */
-static int decode_temp(u8 twos_complement, u8 raw)
-{
-	return twos_complement ? (s8)raw : raw - 64;
-}
-
-static u8 encode_temp(u8 twos_complement, int cooked)
-{
-	u8 ret = twos_complement ? cooked & 0xFF : cooked + 64;
-	return SENSORS_LIMIT(ret, 0, 255);
-}
-
-static ssize_t show_temp_min(struct device *dev,
-			     struct device_attribute *devattr,
-			     char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", 1000 * decode_temp(
-						data->temp_twos_complement,
-						data->temp_min[attr->index]));
-}
-
-static ssize_t set_temp_min(struct device *dev,
-			    struct device_attribute *devattr,
-			    const char *buf,
-			    size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = DIV_ROUND_CLOSEST(temp, 1000);
-	temp = encode_temp(data->temp_twos_complement, temp);
-
-	mutex_lock(&data->lock);
-	data->temp_min[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MIN(attr->index),
-				  temp);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_temp_max(struct device *dev,
-			     struct device_attribute *devattr,
-			     char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", 1000 * decode_temp(
-						data->temp_twos_complement,
-						data->temp_max[attr->index]));
-}
-
-static ssize_t set_temp_max(struct device *dev,
-			    struct device_attribute *devattr,
-			    const char *buf,
-			    size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = DIV_ROUND_CLOSEST(temp, 1000);
-	temp = encode_temp(data->temp_twos_complement, temp);
-
-	mutex_lock(&data->lock);
-	data->temp_max[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MAX(attr->index),
-				  temp);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", 1000 * decode_temp(
-						data->temp_twos_complement,
-						data->temp[attr->index]));
-}
-
-static ssize_t show_fan_min(struct device *dev,
-			    struct device_attribute *devattr,
-			    char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-
-	if (FAN_DATA_VALID(data->fan_min[attr->index]))
-		return sprintf(buf, "%d\n",
-			       FAN_PERIOD_TO_RPM(data->fan_min[attr->index]));
-	else
-		return sprintf(buf, "0\n");
-}
-
-static ssize_t set_fan_min(struct device *dev,
-			   struct device_attribute *devattr,
-			   const char *buf, size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp) || !temp)
-		return -EINVAL;
-
-	temp = FAN_RPM_TO_PERIOD(temp);
-	temp = SENSORS_LIMIT(temp, 1, 65534);
-
-	mutex_lock(&data->lock);
-	data->fan_min[attr->index] = temp;
-	adt7473_write_word_data(client, ADT7473_REG_FAN_MIN(attr->index), temp);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
-			char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-
-	if (FAN_DATA_VALID(data->fan[attr->index]))
-		return sprintf(buf, "%d\n",
-			       FAN_PERIOD_TO_RPM(data->fan[attr->index]));
-	else
-		return sprintf(buf, "0\n");
-}
-
-static ssize_t show_max_duty_at_crit(struct device *dev,
-				     struct device_attribute *devattr,
-				     char *buf)
-{
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", data->max_duty_at_overheat);
-}
-
-static ssize_t set_max_duty_at_crit(struct device *dev,
-				    struct device_attribute *devattr,
-				    const char *buf,
-				    size_t count)
-{
-	u8 reg;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	mutex_lock(&data->lock);
-	data->max_duty_at_overheat = !!temp;
-	reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
-	if (temp)
-		reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
-	else
-		reg &= ~ADT7473_CFG4_MAX_DUTY_AT_OVT;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_CFG4, reg);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
-			char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", data->pwm[attr->index]);
-}
-
-static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
-			const char *buf, size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = SENSORS_LIMIT(temp, 0, 255);
-
-	mutex_lock(&data->lock);
-	data->pwm[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM(attr->index), temp);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_pwm_max(struct device *dev,
-			    struct device_attribute *devattr,
-			    char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", data->pwm_max[attr->index]);
-}
-
-static ssize_t set_pwm_max(struct device *dev,
-			   struct device_attribute *devattr,
-			   const char *buf,
-			   size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = SENSORS_LIMIT(temp, 0, 255);
-
-	mutex_lock(&data->lock);
-	data->pwm_max[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MAX(attr->index),
-				  temp);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_pwm_min(struct device *dev,
-			    struct device_attribute *devattr,
-			    char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
-}
-
-static ssize_t set_pwm_min(struct device *dev,
-			   struct device_attribute *devattr,
-			   const char *buf,
-			   size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = SENSORS_LIMIT(temp, 0, 255);
-
-	mutex_lock(&data->lock);
-	data->pwm_min[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MIN(attr->index),
-				  temp);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_temp_tmax(struct device *dev,
-			      struct device_attribute *devattr,
-			      char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", 1000 * decode_temp(
-						data->temp_twos_complement,
-						data->temp_tmax[attr->index]));
-}
-
-static ssize_t set_temp_tmax(struct device *dev,
-			     struct device_attribute *devattr,
-			     const char *buf,
-			     size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = DIV_ROUND_CLOSEST(temp, 1000);
-	temp = encode_temp(data->temp_twos_complement, temp);
-
-	mutex_lock(&data->lock);
-	data->temp_tmax[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMAX(attr->index),
-				  temp);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_temp_tmin(struct device *dev,
-			      struct device_attribute *devattr,
-			      char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	return sprintf(buf, "%d\n", 1000 * decode_temp(
-						data->temp_twos_complement,
-						data->temp_tmin[attr->index]));
-}
-
-static ssize_t set_temp_tmin(struct device *dev,
-			     struct device_attribute *devattr,
-			     const char *buf,
-			     size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = DIV_ROUND_CLOSEST(temp, 1000);
-	temp = encode_temp(data->temp_twos_complement, temp);
-
-	mutex_lock(&data->lock);
-	data->temp_tmin[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMIN(attr->index),
-				  temp);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_pwm_enable(struct device *dev,
-			       struct device_attribute *devattr,
-			       char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-
-	switch (data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT) {
-	case 3:
-		return sprintf(buf, "0\n");
-	case 7:
-		return sprintf(buf, "1\n");
-	default:
-		return sprintf(buf, "2\n");
-	}
-}
-
-static ssize_t set_pwm_enable(struct device *dev,
-			      struct device_attribute *devattr,
-			      const char *buf,
-			      size_t count)
-{
-	u8 reg;
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	switch (temp) {
-	case 0:
-		temp = 3;
-		break;
-	case 1:
-		temp = 7;
-		break;
-	case 2:
-		/* Enter automatic mode with fans off */
-		temp = 4;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	mutex_lock(&data->lock);
-	reg = i2c_smbus_read_byte_data(client,
-				       ADT7473_REG_PWM_BHVR(attr->index));
-	reg = (temp << ADT7473_PWM_BHVR_SHIFT) |
-	      (reg & ~ADT7473_PWM_BHVR_MASK);
-	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index),
-				  reg);
-	data->pwm_behavior[attr->index] = reg;
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_pwm_auto_temp(struct device *dev,
-				  struct device_attribute *devattr,
-				  char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-	int bhvr = data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT;
-
-	switch (bhvr) {
-	case 3:
-	case 4:
-	case 7:
-		return sprintf(buf, "0\n");
-	case 0:
-	case 1:
-	case 5:
-	case 6:
-		return sprintf(buf, "%d\n", bhvr + 1);
-	case 2:
-		return sprintf(buf, "4\n");
-	}
-	/* shouldn't ever get here */
-	BUG();
-}
-
-static ssize_t set_pwm_auto_temp(struct device *dev,
-				 struct device_attribute *devattr,
-				 const char *buf,
-				 size_t count)
-{
-	u8 reg;
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adt7473_data *data = i2c_get_clientdata(client);
-	long temp;
-
-	if (strict_strtol(buf, 10, &temp))
-		return -EINVAL;
-
-	switch (temp) {
-	case 1:
-	case 2:
-	case 6:
-	case 7:
-		temp--;
-		break;
-	case 0:
-		temp = 4;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	mutex_lock(&data->lock);
-	reg = i2c_smbus_read_byte_data(client,
-				       ADT7473_REG_PWM_BHVR(attr->index));
-	reg = (temp << ADT7473_PWM_BHVR_SHIFT) |
-	      (reg & ~ADT7473_PWM_BHVR_MASK);
-	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index),
-				  reg);
-	data->pwm_behavior[attr->index] = reg;
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t show_alarm(struct device *dev,
-			  struct device_attribute *devattr,
-			  char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7473_data *data = adt7473_update_device(dev);
-
-	if (data->alarm & attr->index)
-		return sprintf(buf, "1\n");
-	else
-		return sprintf(buf, "0\n");
-}
-
-
-static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max,
-			  set_volt_max, 0);
-static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max,
-			  set_volt_max, 1);
-
-static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min,
-			  set_volt_min, 0);
-static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min,
-			  set_volt_min, 1);
-
-static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_volt, NULL, 0);
-static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_volt, NULL, 1);
-
-static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL,
-			  ADT7473_VCCP_ALARM);
-static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL,
-			  ADT7473_VCC_ALARM);
-
-static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
-			  set_temp_max, 0);
-static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
-			  set_temp_max, 1);
-static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max,
-			  set_temp_max, 2);
-
-static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
-			  set_temp_min, 0);
-static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
-			  set_temp_min, 1);
-static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min,
-			  set_temp_min, 2);
-
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
-
-static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
-			  ADT7473_R1T_ALARM | ALARM2(ADT7473_R1T_SHORT));
-static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
-			  ADT7473_LT_ALARM);
-static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
-			  ADT7473_R2T_ALARM | ALARM2(ADT7473_R2T_SHORT));
-
-static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
-			  set_fan_min, 0);
-static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
-			  set_fan_min, 1);
-static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
-			  set_fan_min, 2);
-static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
-			  set_fan_min, 3);
-
-static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
-static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
-static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
-static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
-
-static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
-			  ALARM2(ADT7473_FAN1_ALARM));
-static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
-			  ALARM2(ADT7473_FAN2_ALARM));
-static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
-			  ALARM2(ADT7473_FAN3_ALARM));
-static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
-			  ALARM2(ADT7473_FAN4_ALARM));
-
-static SENSOR_DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
-			  show_max_duty_at_crit, set_max_duty_at_crit, 0);
-
-static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
-static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
-static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
-
-static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
-			  show_pwm_min, set_pwm_min, 0);
-static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
-			  show_pwm_min, set_pwm_min, 1);
-static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
-			  show_pwm_min, set_pwm_min, 2);
-
-static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
-			  show_pwm_max, set_pwm_max, 0);
-static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
-			  show_pwm_max, set_pwm_max, 1);
-static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
-			  show_pwm_max, set_pwm_max, 2);
-
-static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO,
-			  show_temp_tmin, set_temp_tmin, 0);
-static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
-			  show_temp_tmin, set_temp_tmin, 1);
-static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO,
-			  show_temp_tmin, set_temp_tmin, 2);
-
-static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
-			  show_temp_tmax, set_temp_tmax, 0);
-static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
-			  show_temp_tmax, set_temp_tmax, 1);
-static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO,
-			  show_temp_tmax, set_temp_tmax, 2);
-
-static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
-			  set_pwm_enable, 0);
-static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
-			  set_pwm_enable, 1);
-static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
-			  set_pwm_enable, 2);
-
-static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO,
-			  show_pwm_auto_temp, set_pwm_auto_temp, 0);
-static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO,
-			  show_pwm_auto_temp, set_pwm_auto_temp, 1);
-static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO,
-			  show_pwm_auto_temp, set_pwm_auto_temp, 2);
-
-static struct attribute *adt7473_attr[] =
-{
-	&sensor_dev_attr_in1_max.dev_attr.attr,
-	&sensor_dev_attr_in2_max.dev_attr.attr,
-	&sensor_dev_attr_in1_min.dev_attr.attr,
-	&sensor_dev_attr_in2_min.dev_attr.attr,
-	&sensor_dev_attr_in1_input.dev_attr.attr,
-	&sensor_dev_attr_in2_input.dev_attr.attr,
-	&sensor_dev_attr_in1_alarm.dev_attr.attr,
-	&sensor_dev_attr_in2_alarm.dev_attr.attr,
-
-	&sensor_dev_attr_temp1_max.dev_attr.attr,
-	&sensor_dev_attr_temp2_max.dev_attr.attr,
-	&sensor_dev_attr_temp3_max.dev_attr.attr,
-	&sensor_dev_attr_temp1_min.dev_attr.attr,
-	&sensor_dev_attr_temp2_min.dev_attr.attr,
-	&sensor_dev_attr_temp3_min.dev_attr.attr,
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_temp2_input.dev_attr.attr,
-	&sensor_dev_attr_temp3_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
-	&sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
-	&sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
-	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
-	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
-	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
-
-	&sensor_dev_attr_fan1_min.dev_attr.attr,
-	&sensor_dev_attr_fan2_min.dev_attr.attr,
-	&sensor_dev_attr_fan3_min.dev_attr.attr,
-	&sensor_dev_attr_fan4_min.dev_attr.attr,
-	&sensor_dev_attr_fan1_input.dev_attr.attr,
-	&sensor_dev_attr_fan2_input.dev_attr.attr,
-	&sensor_dev_attr_fan3_input.dev_attr.attr,
-	&sensor_dev_attr_fan4_input.dev_attr.attr,
-	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
-
-	&sensor_dev_attr_pwm_use_point2_pwm_at_crit.dev_attr.attr,
-
-	&sensor_dev_attr_pwm1.dev_attr.attr,
-	&sensor_dev_attr_pwm2.dev_attr.attr,
-	&sensor_dev_attr_pwm3.dev_attr.attr,
-	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
-	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
-	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
-	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
-
-	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
-	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
-
-	NULL
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int adt7473_detect(struct i2c_client *client,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-	int vendor, device, revision;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
-	if (vendor != ADT7473_VENDOR)
-		return -ENODEV;
-
-	device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
-	if (device != ADT7473_DEVICE)
-		return -ENODEV;
-
-	revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION);
-	if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
-		return -ENODEV;
-
-	strlcpy(info->type, "adt7473", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int adt7473_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct adt7473_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(client, data);
-	mutex_init(&data->lock);
-
-	dev_info(&client->dev, "%s chip found\n", client->name);
-
-	/* Initialize the ADT7473 chip */
-	adt7473_init_client(client);
-
-	/* Register sysfs hooks */
-	data->attrs.attrs = adt7473_attr;
-	err = sysfs_create_group(&client->dev.kobj, &data->attrs);
-	if (err)
-		goto exit_free;
-
-	data->hwmon_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
-
-	return 0;
-
-exit_remove:
-	sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_free:
-	kfree(data);
-exit:
-	return err;
-}
-
-static int adt7473_remove(struct i2c_client *client)
-{
-	struct adt7473_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &data->attrs);
-	kfree(data);
-	return 0;
-}
-
-static int __init adt7473_init(void)
-{
-	pr_notice("The adt7473 driver is deprecated, please use the adt7475 "
-		  "driver instead\n");
-	return i2c_add_driver(&adt7473_driver);
-}
-
-static void __exit adt7473_exit(void)
-{
-	i2c_del_driver(&adt7473_driver);
-}
-
-MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
-MODULE_DESCRIPTION("ADT7473 driver");
-MODULE_LICENSE("GPL");
-
-module_init(adt7473_init);
-module_exit(adt7473_exit);
diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c
new file mode 100644
index 00000000000..7f948105d8a
--- /dev/null
+++ b/drivers/hwmon/asc7621.c
@@ -0,0 +1,1255 @@
+/*
+ * asc7621.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
+ * Copyright (c) 2007, 2010 George Joseph  <george.joseph@fairview5.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = {
+	0x2c, 0x2d, 0x2e, I2C_CLIENT_END
+};
+
+enum asc7621_type {
+	asc7621,
+	asc7621a
+};
+
+#define INTERVAL_HIGH   (HZ + HZ / 2)
+#define INTERVAL_LOW    (1 * 60 * HZ)
+#define PRI_NONE        0
+#define PRI_LOW         1
+#define PRI_HIGH        2
+#define FIRST_CHIP      asc7621
+#define LAST_CHIP       asc7621a
+
+struct asc7621_chip {
+	char *name;
+	enum asc7621_type chip_type;
+	u8 company_reg;
+	u8 company_id;
+	u8 verstep_reg;
+	u8 verstep_id;
+	unsigned short *addresses;
+};
+
+static struct asc7621_chip asc7621_chips[] = {
+	{
+		.name = "asc7621",
+		.chip_type = asc7621,
+		.company_reg = 0x3e,
+		.company_id = 0x61,
+		.verstep_reg = 0x3f,
+		.verstep_id = 0x6c,
+		.addresses = normal_i2c,
+	 },
+	{
+		.name = "asc7621a",
+		.chip_type = asc7621a,
+		.company_reg = 0x3e,
+		.company_id = 0x61,
+		.verstep_reg = 0x3f,
+		.verstep_id = 0x6d,
+		.addresses = normal_i2c,
+	 },
+};
+
+/*
+ * Defines the highest register to be used, not the count.
+ * The actual count will probably be smaller because of gaps
+ * in the implementation (unused register locations).
+ * This define will safely set the array size of both the parameter
+ * and data arrays.
+ * This comes from the data sheet register description table.
+ */
+#define LAST_REGISTER 0xff
+
+struct asc7621_data {
+	struct i2c_client client;
+	struct device *class_dev;
+	struct mutex update_lock;
+	int valid;		/* !=0 if following fields are valid */
+	unsigned long last_high_reading;	/* In jiffies */
+	unsigned long last_low_reading;		/* In jiffies */
+	/*
+	 * Registers we care about occupy the corresponding index
+	 * in the array.  Registers we don't care about are left
+	 * at 0.
+	 */
+	u8 reg[LAST_REGISTER + 1];
+};
+
+/*
+ * Macro to get the parent asc7621_param structure
+ * from a sensor_device_attribute passed into the
+ * show/store functions.
+ */
+#define to_asc7621_param(_sda) \
+	container_of(_sda, struct asc7621_param, sda)
+
+/*
+ * Each parameter to be retrieved needs an asc7621_param structure
+ * allocated.  It contains the sensor_device_attribute structure
+ * and the control info needed to retrieve the value from the register map.
+ */
+struct asc7621_param {
+	struct sensor_device_attribute sda;
+	u8 priority;
+	u8 msb[3];
+	u8 lsb[3];
+	u8 mask[3];
+	u8 shift[3];
+};
+
+/*
+ * This is the map that ultimately indicates whether we'll be
+ * retrieving a register value or not, and at what frequency.
+ */
+static u8 asc7621_register_priorities[255];
+
+static struct asc7621_data *asc7621_update_device(struct device *dev);
+
+static inline u8 read_byte(struct i2c_client *client, u8 reg)
+{
+	int res = i2c_smbus_read_byte_data(client, reg);
+	if (res < 0) {
+		dev_err(&client->dev,
+			"Unable to read from register 0x%02x.\n", reg);
+		return 0;
+	};
+	return res & 0xff;
+}
+
+static inline int write_byte(struct i2c_client *client, u8 reg, u8 data)
+{
+	int res = i2c_smbus_write_byte_data(client, reg, data);
+	if (res < 0) {
+		dev_err(&client->dev,
+			"Unable to write value 0x%02x to register 0x%02x.\n",
+			data, reg);
+	};
+	return res;
+}
+
+/*
+ * Data Handlers
+ * Each function handles the formatting, storage
+ * and retrieval of like parameters.
+ */
+
+#define SETUP_SHOW_data_param(d, a) \
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(a); \
+	struct asc7621_data *data = asc7621_update_device(d); \
+	struct asc7621_param *param = to_asc7621_param(sda)
+
+#define SETUP_STORE_data_param(d, a) \
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(a); \
+	struct i2c_client *client = to_i2c_client(d); \
+	struct asc7621_data *data = i2c_get_clientdata(client); \
+	struct asc7621_param *param = to_asc7621_param(sda)
+
+/*
+ * u8 is just what it sounds like...an unsigned byte with no
+ * special formatting.
+ */
+static ssize_t show_u8(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+
+	return sprintf(buf, "%u\n", data->reg[param->msb[0]]);
+}
+
+static ssize_t store_u8(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	reqval = SENSORS_LIMIT(reqval, 0, 255);
+
+	mutex_lock(&data->update_lock);
+	data->reg[param->msb[0]] = reqval;
+	write_byte(client, param->msb[0], reqval);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/*
+ * Many of the config values occupy only a few bits of a register.
+ */
+static ssize_t show_bitmask(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+
+	return sprintf(buf, "%u\n",
+		       (data->reg[param->msb[0]] >> param->
+			shift[0]) & param->mask[0]);
+}
+
+static ssize_t store_bitmask(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval;
+	u8 currval;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	reqval = SENSORS_LIMIT(reqval, 0, param->mask[0]);
+
+	reqval = (reqval & param->mask[0]) << param->shift[0];
+
+	mutex_lock(&data->update_lock);
+	currval = read_byte(client, param->msb[0]);
+	reqval |= (currval & ~(param->mask[0] << param->shift[0]));
+	data->reg[param->msb[0]] = reqval;
+	write_byte(client, param->msb[0], reqval);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/*
+ * 16 bit fan rpm values
+ * reported by the device as the number of 11.111us periods (90khz)
+ * between full fan rotations.  Therefore...
+ * RPM = (90000 * 60) / register value
+ */
+static ssize_t show_fan16(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u16 regval;
+
+	mutex_lock(&data->update_lock);
+	regval = (data->reg[param->msb[0]] << 8) | data->reg[param->lsb[0]];
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%u\n",
+		       (regval == 0 ? -1 : (regval) ==
+			0xffff ? 0 : 5400000 / regval));
+}
+
+static ssize_t store_fan16(struct device *dev,
+			   struct device_attribute *attr, const char *buf,
+			   size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	reqval =
+	    (SENSORS_LIMIT((reqval) <= 0 ? 0 : 5400000 / (reqval), 0, 65534));
+
+	mutex_lock(&data->update_lock);
+	data->reg[param->msb[0]] = (reqval >> 8) & 0xff;
+	data->reg[param->lsb[0]] = reqval & 0xff;
+	write_byte(client, param->msb[0], data->reg[param->msb[0]]);
+	write_byte(client, param->lsb[0], data->reg[param->lsb[0]]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/*
+ * Voltages are scaled in the device so that the nominal voltage
+ * is 3/4ths of the 0-255 range (i.e. 192).
+ * If all voltages are 'normal' then all voltage registers will
+ * read 0xC0.  This doesn't help us if we don't have a point of refernce.
+ * The data sheet however provides us with the full scale value for each
+ * which is stored in in_scaling.  The sda->index parameter value provides
+ * the index into in_scaling.
+ *
+ * NOTE: The chip expects the first 2 inputs be 2.5 and 2.25 volts
+ * respectively. That doesn't mean that's what the motherboard provides. :)
+ */
+
+static int asc7621_in_scaling[] = {
+	3320, 3000, 4380, 6640, 16000
+};
+
+static ssize_t show_in10(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u16 regval;
+	u8 nr = sda->index;
+
+	mutex_lock(&data->update_lock);
+	regval = (data->reg[param->msb[0]] * asc7621_in_scaling[nr]) / 256;
+
+	/* The LSB value is a 2-bit scaling of the MSB's LSbit value.
+	 * I.E.  If the maximim voltage for this input is 6640 millivolts then
+	 * a MSB register value of 0 = 0mv and 255 = 6640mv.
+	 * A 1 step change therefore represents 25.9mv (6640 / 256).
+	 * The extra 2-bits therefore represent increments of 6.48mv.
+	 */
+	regval += ((asc7621_in_scaling[nr] / 256) / 4) *
+	    (data->reg[param->lsb[0]] >> 6);
+
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%u\n", regval);
+}
+
+/* 8 bit voltage values (the mins and maxs) */
+static ssize_t show_in8(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u8 nr = sda->index;
+
+	return sprintf(buf, "%u\n",
+		       ((data->reg[param->msb[0]] *
+			 asc7621_in_scaling[nr]) / 256));
+}
+
+static ssize_t store_in8(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval;
+	u8 nr = sda->index;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	reqval = SENSORS_LIMIT(reqval, 0, asc7621_in_scaling[nr]);
+
+	reqval = (reqval * 255 + 128) / asc7621_in_scaling[nr];
+
+	mutex_lock(&data->update_lock);
+	data->reg[param->msb[0]] = reqval;
+	write_byte(client, param->msb[0], reqval);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t show_temp8(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+
+	return sprintf(buf, "%d\n", ((s8) data->reg[param->msb[0]]) * 1000);
+}
+
+static ssize_t store_temp8(struct device *dev,
+			   struct device_attribute *attr, const char *buf,
+			   size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval;
+	s8 temp;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	reqval = SENSORS_LIMIT(reqval, -127000, 127000);
+
+	temp = reqval / 1000;
+
+	mutex_lock(&data->update_lock);
+	data->reg[param->msb[0]] = temp;
+	write_byte(client, param->msb[0], temp);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/*
+ * Temperatures that occupy 2 bytes always have the whole
+ * number of degrees in the MSB with some part of the LSB
+ * indicating fractional degrees.
+ */
+
+/*   mmmmmmmm.llxxxxxx */
+static ssize_t show_temp10(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u8 msb, lsb;
+	int temp;
+
+	mutex_lock(&data->update_lock);
+	msb = data->reg[param->msb[0]];
+	lsb = (data->reg[param->lsb[0]] >> 6) & 0x03;
+	temp = (((s8) msb) * 1000) + (lsb * 250);
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%d\n", temp);
+}
+
+/*   mmmmmm.ll */
+static ssize_t show_temp62(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u8 regval = data->reg[param->msb[0]];
+	int temp = ((s8) (regval & 0xfc) * 1000) + ((regval & 0x03) * 250);
+
+	return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t store_temp62(struct device *dev,
+			    struct device_attribute *attr, const char *buf,
+			    size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval, i, f;
+	s8 temp;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	reqval = SENSORS_LIMIT(reqval, -32000, 31750);
+	i = reqval / 1000;
+	f = reqval - (i * 1000);
+	temp = i << 2;
+	temp |= f / 250;
+
+	mutex_lock(&data->update_lock);
+	data->reg[param->msb[0]] = temp;
+	write_byte(client, param->msb[0], temp);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/*
+ * The aSC7621 doesn't provide an "auto_point2".  Instead, you
+ * specify the auto_point1 and a range.  To keep with the sysfs
+ * hwmon specs, we synthesize the auto_point_2 from them.
+ */
+
+static u32 asc7621_range_map[] = {
+	2000, 2500, 3330, 4000, 5000, 6670, 8000, 10000,
+	13330, 16000, 20000, 26670, 32000, 40000, 53330, 80000,
+};
+
+static ssize_t show_ap2_temp(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	long auto_point1;
+	u8 regval;
+	int temp;
+
+	mutex_lock(&data->update_lock);
+	auto_point1 = ((s8) data->reg[param->msb[1]]) * 1000;
+	regval =
+	    ((data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0]);
+	temp = auto_point1 + asc7621_range_map[SENSORS_LIMIT(regval, 0, 15)];
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%d\n", temp);
+
+}
+
+static ssize_t store_ap2_temp(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval, auto_point1;
+	int i;
+	u8 currval, newval = 0;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	auto_point1 = data->reg[param->msb[1]] * 1000;
+	reqval = SENSORS_LIMIT(reqval, auto_point1 + 2000, auto_point1 + 80000);
+
+	for (i = ARRAY_SIZE(asc7621_range_map) - 1; i >= 0; i--) {
+		if (reqval >= auto_point1 + asc7621_range_map[i]) {
+			newval = i;
+			break;
+		}
+	}
+
+	newval = (newval & param->mask[0]) << param->shift[0];
+	currval = read_byte(client, param->msb[0]);
+	newval |= (currval & ~(param->mask[0] << param->shift[0]));
+	data->reg[param->msb[0]] = newval;
+	write_byte(client, param->msb[0], newval);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm_ac(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u8 config, altbit, regval;
+	u8 map[] = {
+		0x01, 0x02, 0x04, 0x1f, 0x00, 0x06, 0x07, 0x10,
+		0x08, 0x0f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f
+	};
+
+	mutex_lock(&data->update_lock);
+	config = (data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
+	altbit = (data->reg[param->msb[1]] >> param->shift[1]) & param->mask[1];
+	regval = config | (altbit << 3);
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%u\n", map[SENSORS_LIMIT(regval, 0, 15)]);
+}
+
+static ssize_t store_pwm_ac(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	unsigned long reqval;
+	u8 currval, config, altbit, newval;
+	u16 map[] = {
+		0x04, 0x00, 0x01, 0xff, 0x02, 0xff, 0x05, 0x06,
+		0x08, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f,
+		0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03,
+	};
+
+	if (strict_strtoul(buf, 10, &reqval))
+		return -EINVAL;
+
+	if (reqval > 31)
+		return -EINVAL;
+
+	reqval = map[reqval];
+	if (reqval == 0xff)
+		return -EINVAL;
+
+	config = reqval & 0x07;
+	altbit = (reqval >> 3) & 0x01;
+
+	config = (config & param->mask[0]) << param->shift[0];
+	altbit = (altbit & param->mask[1]) << param->shift[1];
+
+	mutex_lock(&data->update_lock);
+	currval = read_byte(client, param->msb[0]);
+	newval = config | (currval & ~(param->mask[0] << param->shift[0]));
+	newval = altbit | (newval & ~(param->mask[1] << param->shift[1]));
+	data->reg[param->msb[0]] = newval;
+	write_byte(client, param->msb[0], newval);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm_enable(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u8 config, altbit, minoff, val, newval;
+
+	mutex_lock(&data->update_lock);
+	config = (data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
+	altbit = (data->reg[param->msb[1]] >> param->shift[1]) & param->mask[1];
+	minoff = (data->reg[param->msb[2]] >> param->shift[2]) & param->mask[2];
+	mutex_unlock(&data->update_lock);
+
+	val = config | (altbit << 3);
+	newval = 0;
+
+	if (val == 3 || val >= 10)
+		newval = 255;
+	else if (val == 4)
+		newval = 0;
+	else if (val == 7)
+		newval = 1;
+	else if (minoff == 1)
+		newval = 2;
+	else
+		newval = 3;
+
+	return sprintf(buf, "%u\n", newval);
+}
+
+static ssize_t store_pwm_enable(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval;
+	u8 currval, config, altbit, newval, minoff = 255;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	switch (reqval) {
+	case 0:
+		newval = 0x04;
+		break;
+	case 1:
+		newval = 0x07;
+		break;
+	case 2:
+		newval = 0x00;
+		minoff = 1;
+		break;
+	case 3:
+		newval = 0x00;
+		minoff = 0;
+		break;
+	case 255:
+		newval = 0x03;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	config = newval & 0x07;
+	altbit = (newval >> 3) & 0x01;
+
+	mutex_lock(&data->update_lock);
+	config = (config & param->mask[0]) << param->shift[0];
+	altbit = (altbit & param->mask[1]) << param->shift[1];
+	currval = read_byte(client, param->msb[0]);
+	newval = config | (currval & ~(param->mask[0] << param->shift[0]));
+	newval = altbit | (newval & ~(param->mask[1] << param->shift[1]));
+	data->reg[param->msb[0]] = newval;
+	write_byte(client, param->msb[0], newval);
+	if (minoff < 255) {
+		minoff = (minoff & param->mask[2]) << param->shift[2];
+		currval = read_byte(client, param->msb[2]);
+		newval =
+		    minoff | (currval & ~(param->mask[2] << param->shift[2]));
+		data->reg[param->msb[2]] = newval;
+		write_byte(client, param->msb[2], newval);
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static u32 asc7621_pwm_freq_map[] = {
+	10, 15, 23, 30, 38, 47, 62, 94,
+	23000, 24000, 25000, 26000, 27000, 28000, 29000, 30000
+};
+
+static ssize_t show_pwm_freq(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u8 regval =
+	    (data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
+
+	regval = SENSORS_LIMIT(regval, 0, 15);
+
+	return sprintf(buf, "%u\n", asc7621_pwm_freq_map[regval]);
+}
+
+static ssize_t store_pwm_freq(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	unsigned long reqval;
+	u8 currval, newval = 255;
+	int i;
+
+	if (strict_strtoul(buf, 10, &reqval))
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(asc7621_pwm_freq_map); i++) {
+		if (reqval == asc7621_pwm_freq_map[i]) {
+			newval = i;
+			break;
+		}
+	}
+	if (newval == 255)
+		return -EINVAL;
+
+	newval = (newval & param->mask[0]) << param->shift[0];
+
+	mutex_lock(&data->update_lock);
+	currval = read_byte(client, param->msb[0]);
+	newval |= (currval & ~(param->mask[0] << param->shift[0]));
+	data->reg[param->msb[0]] = newval;
+	write_byte(client, param->msb[0], newval);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static u32 asc7621_pwm_auto_spinup_map[] =  {
+	0, 100, 250, 400, 700, 1000, 2000, 4000
+};
+
+static ssize_t show_pwm_ast(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u8 regval =
+	    (data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
+
+	regval = SENSORS_LIMIT(regval, 0, 7);
+
+	return sprintf(buf, "%u\n", asc7621_pwm_auto_spinup_map[regval]);
+
+}
+
+static ssize_t store_pwm_ast(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval;
+	u8 currval, newval = 255;
+	u32 i;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(asc7621_pwm_auto_spinup_map); i++) {
+		if (reqval == asc7621_pwm_auto_spinup_map[i]) {
+			newval = i;
+			break;
+		}
+	}
+	if (newval == 255)
+		return -EINVAL;
+
+	newval = (newval & param->mask[0]) << param->shift[0];
+
+	mutex_lock(&data->update_lock);
+	currval = read_byte(client, param->msb[0]);
+	newval |= (currval & ~(param->mask[0] << param->shift[0]));
+	data->reg[param->msb[0]] = newval;
+	write_byte(client, param->msb[0], newval);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static u32 asc7621_temp_smoothing_time_map[] = {
+	35000, 17600, 11800, 7000, 4400, 3000, 1600, 800
+};
+
+static ssize_t show_temp_st(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	SETUP_SHOW_data_param(dev, attr);
+	u8 regval =
+	    (data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
+	regval = SENSORS_LIMIT(regval, 0, 7);
+
+	return sprintf(buf, "%u\n", asc7621_temp_smoothing_time_map[regval]);
+}
+
+static ssize_t store_temp_st(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	SETUP_STORE_data_param(dev, attr);
+	long reqval;
+	u8 currval, newval = 255;
+	u32 i;
+
+	if (strict_strtol(buf, 10, &reqval))
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(asc7621_temp_smoothing_time_map); i++) {
+		if (reqval == asc7621_temp_smoothing_time_map[i]) {
+			newval = i;
+			break;
+		}
+	}
+
+	if (newval == 255)
+		return -EINVAL;
+
+	newval = (newval & param->mask[0]) << param->shift[0];
+
+	mutex_lock(&data->update_lock);
+	currval = read_byte(client, param->msb[0]);
+	newval |= (currval & ~(param->mask[0] << param->shift[0]));
+	data->reg[param->msb[0]] = newval;
+	write_byte(client, param->msb[0], newval);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/*
+ * End of data handlers
+ *
+ * These defines do nothing more than make the table easier
+ * to read when wrapped at column 80.
+ */
+
+/*
+ * Creates a variable length array inititalizer.
+ * VAA(1,3,5,7) would produce {1,3,5,7}
+ */
+#define VAA(args...) {args}
+
+#define PREAD(name, n, pri, rm, rl, m, s, r) \
+	{.sda = SENSOR_ATTR(name, S_IRUGO, show_##r, NULL, n), \
+	  .priority = pri, .msb[0] = rm, .lsb[0] = rl, .mask[0] = m, \
+	  .shift[0] = s,}
+
+#define PWRITE(name, n, pri, rm, rl, m, s, r) \
+	{.sda = SENSOR_ATTR(name, S_IRUGO | S_IWUSR, show_##r, store_##r, n), \
+	  .priority = pri, .msb[0] = rm, .lsb[0] = rl, .mask[0] = m, \
+	  .shift[0] = s,}
+
+/*
+ * PWRITEM assumes that the initializers for the .msb, .lsb, .mask and .shift
+ * were created using the VAA macro.
+ */
+#define PWRITEM(name, n, pri, rm, rl, m, s, r) \
+	{.sda = SENSOR_ATTR(name, S_IRUGO | S_IWUSR, show_##r, store_##r, n), \
+	  .priority = pri, .msb = rm, .lsb = rl, .mask = m, .shift = s,}
+
+static struct asc7621_param asc7621_params[] = {
+	PREAD(in0_input, 0, PRI_HIGH, 0x20, 0x13, 0, 0, in10),
+	PREAD(in1_input, 1, PRI_HIGH, 0x21, 0x18, 0, 0, in10),
+	PREAD(in2_input, 2, PRI_HIGH, 0x22, 0x11, 0, 0, in10),
+	PREAD(in3_input, 3, PRI_HIGH, 0x23, 0x12, 0, 0, in10),
+	PREAD(in4_input, 4, PRI_HIGH, 0x24, 0x14, 0, 0, in10),
+
+	PWRITE(in0_min, 0, PRI_LOW, 0x44, 0, 0, 0, in8),
+	PWRITE(in1_min, 1, PRI_LOW, 0x46, 0, 0, 0, in8),
+	PWRITE(in2_min, 2, PRI_LOW, 0x48, 0, 0, 0, in8),
+	PWRITE(in3_min, 3, PRI_LOW, 0x4a, 0, 0, 0, in8),
+	PWRITE(in4_min, 4, PRI_LOW, 0x4c, 0, 0, 0, in8),
+
+	PWRITE(in0_max, 0, PRI_LOW, 0x45, 0, 0, 0, in8),
+	PWRITE(in1_max, 1, PRI_LOW, 0x47, 0, 0, 0, in8),
+	PWRITE(in2_max, 2, PRI_LOW, 0x49, 0, 0, 0, in8),
+	PWRITE(in3_max, 3, PRI_LOW, 0x4b, 0, 0, 0, in8),
+	PWRITE(in4_max, 4, PRI_LOW, 0x4d, 0, 0, 0, in8),
+
+	PREAD(in0_alarm, 0, PRI_LOW, 0x41, 0, 0x01, 0, bitmask),
+	PREAD(in1_alarm, 1, PRI_LOW, 0x41, 0, 0x01, 1, bitmask),
+	PREAD(in2_alarm, 2, PRI_LOW, 0x41, 0, 0x01, 2, bitmask),
+	PREAD(in3_alarm, 3, PRI_LOW, 0x41, 0, 0x01, 3, bitmask),
+	PREAD(in4_alarm, 4, PRI_LOW, 0x42, 0, 0x01, 0, bitmask),
+
+	PREAD(fan1_input, 0, PRI_HIGH, 0x29, 0x28, 0, 0, fan16),
+	PREAD(fan2_input, 1, PRI_HIGH, 0x2b, 0x2a, 0, 0, fan16),
+	PREAD(fan3_input, 2, PRI_HIGH, 0x2d, 0x2c, 0, 0, fan16),
+	PREAD(fan4_input, 3, PRI_HIGH, 0x2f, 0x2e, 0, 0, fan16),
+
+	PWRITE(fan1_min, 0, PRI_LOW, 0x55, 0x54, 0, 0, fan16),
+	PWRITE(fan2_min, 1, PRI_LOW, 0x57, 0x56, 0, 0, fan16),
+	PWRITE(fan3_min, 2, PRI_LOW, 0x59, 0x58, 0, 0, fan16),
+	PWRITE(fan4_min, 3, PRI_LOW, 0x5b, 0x5a, 0, 0, fan16),
+
+	PREAD(fan1_alarm, 0, PRI_LOW, 0x42, 0, 0x01, 0, bitmask),
+	PREAD(fan2_alarm, 1, PRI_LOW, 0x42, 0, 0x01, 1, bitmask),
+	PREAD(fan3_alarm, 2, PRI_LOW, 0x42, 0, 0x01, 2, bitmask),
+	PREAD(fan4_alarm, 3, PRI_LOW, 0x42, 0, 0x01, 3, bitmask),
+
+	PREAD(temp1_input, 0, PRI_HIGH, 0x25, 0x10, 0, 0, temp10),
+	PREAD(temp2_input, 1, PRI_HIGH, 0x26, 0x15, 0, 0, temp10),
+	PREAD(temp3_input, 2, PRI_HIGH, 0x27, 0x16, 0, 0, temp10),
+	PREAD(temp4_input, 3, PRI_HIGH, 0x33, 0x17, 0, 0, temp10),
+	PREAD(temp5_input, 4, PRI_HIGH, 0xf7, 0xf6, 0, 0, temp10),
+	PREAD(temp6_input, 5, PRI_HIGH, 0xf9, 0xf8, 0, 0, temp10),
+	PREAD(temp7_input, 6, PRI_HIGH, 0xfb, 0xfa, 0, 0, temp10),
+	PREAD(temp8_input, 7, PRI_HIGH, 0xfd, 0xfc, 0, 0, temp10),
+
+	PWRITE(temp1_min, 0, PRI_LOW, 0x4e, 0, 0, 0, temp8),
+	PWRITE(temp2_min, 1, PRI_LOW, 0x50, 0, 0, 0, temp8),
+	PWRITE(temp3_min, 2, PRI_LOW, 0x52, 0, 0, 0, temp8),
+	PWRITE(temp4_min, 3, PRI_LOW, 0x34, 0, 0, 0, temp8),
+
+	PWRITE(temp1_max, 0, PRI_LOW, 0x4f, 0, 0, 0, temp8),
+	PWRITE(temp2_max, 1, PRI_LOW, 0x51, 0, 0, 0, temp8),
+	PWRITE(temp3_max, 2, PRI_LOW, 0x53, 0, 0, 0, temp8),
+	PWRITE(temp4_max, 3, PRI_LOW, 0x35, 0, 0, 0, temp8),
+
+	PREAD(temp1_alarm, 0, PRI_LOW, 0x41, 0, 0x01, 4, bitmask),
+	PREAD(temp2_alarm, 1, PRI_LOW, 0x41, 0, 0x01, 5, bitmask),
+	PREAD(temp3_alarm, 2, PRI_LOW, 0x41, 0, 0x01, 6, bitmask),
+	PREAD(temp4_alarm, 3, PRI_LOW, 0x43, 0, 0x01, 0, bitmask),
+
+	PWRITE(temp1_source, 0, PRI_LOW, 0x02, 0, 0x07, 4, bitmask),
+	PWRITE(temp2_source, 1, PRI_LOW, 0x02, 0, 0x07, 0, bitmask),
+	PWRITE(temp3_source, 2, PRI_LOW, 0x03, 0, 0x07, 4, bitmask),
+	PWRITE(temp4_source, 3, PRI_LOW, 0x03, 0, 0x07, 0, bitmask),
+
+	PWRITE(temp1_smoothing_enable, 0, PRI_LOW, 0x62, 0, 0x01, 3, bitmask),
+	PWRITE(temp2_smoothing_enable, 1, PRI_LOW, 0x63, 0, 0x01, 7, bitmask),
+	PWRITE(temp3_smoothing_enable, 2, PRI_LOW, 0x64, 0, 0x01, 3, bitmask),
+	PWRITE(temp4_smoothing_enable, 3, PRI_LOW, 0x3c, 0, 0x01, 3, bitmask),
+
+	PWRITE(temp1_smoothing_time, 0, PRI_LOW, 0x62, 0, 0x07, 0, temp_st),
+	PWRITE(temp2_smoothing_time, 1, PRI_LOW, 0x63, 0, 0x07, 4, temp_st),
+	PWRITE(temp3_smoothing_time, 2, PRI_LOW, 0x63, 0, 0x07, 0, temp_st),
+	PWRITE(temp4_smoothing_time, 3, PRI_LOW, 0x3c, 0, 0x07, 0, temp_st),
+
+	PWRITE(temp1_auto_point1_temp_hyst, 0, PRI_LOW, 0x6d, 0, 0x0f, 4,
+	       bitmask),
+	PWRITE(temp2_auto_point1_temp_hyst, 1, PRI_LOW, 0x6d, 0, 0x0f, 0,
+	       bitmask),
+	PWRITE(temp3_auto_point1_temp_hyst, 2, PRI_LOW, 0x6e, 0, 0x0f, 4,
+	       bitmask),
+	PWRITE(temp4_auto_point1_temp_hyst, 3, PRI_LOW, 0x6e, 0, 0x0f, 0,
+	       bitmask),
+
+	PREAD(temp1_auto_point2_temp_hyst, 0, PRI_LOW, 0x6d, 0, 0x0f, 4,
+	      bitmask),
+	PREAD(temp2_auto_point2_temp_hyst, 1, PRI_LOW, 0x6d, 0, 0x0f, 0,
+	      bitmask),
+	PREAD(temp3_auto_point2_temp_hyst, 2, PRI_LOW, 0x6e, 0, 0x0f, 4,
+	      bitmask),
+	PREAD(temp4_auto_point2_temp_hyst, 3, PRI_LOW, 0x6e, 0, 0x0f, 0,
+	      bitmask),
+
+	PWRITE(temp1_auto_point1_temp, 0, PRI_LOW, 0x67, 0, 0, 0, temp8),
+	PWRITE(temp2_auto_point1_temp, 1, PRI_LOW, 0x68, 0, 0, 0, temp8),
+	PWRITE(temp3_auto_point1_temp, 2, PRI_LOW, 0x69, 0, 0, 0, temp8),
+	PWRITE(temp4_auto_point1_temp, 3, PRI_LOW, 0x3b, 0, 0, 0, temp8),
+
+	PWRITEM(temp1_auto_point2_temp, 0, PRI_LOW, VAA(0x5f, 0x67), VAA(0),
+		VAA(0x0f), VAA(4), ap2_temp),
+	PWRITEM(temp2_auto_point2_temp, 1, PRI_LOW, VAA(0x60, 0x68), VAA(0),
+		VAA(0x0f), VAA(4), ap2_temp),
+	PWRITEM(temp3_auto_point2_temp, 2, PRI_LOW, VAA(0x61, 0x69), VAA(0),
+		VAA(0x0f), VAA(4), ap2_temp),
+	PWRITEM(temp4_auto_point2_temp, 3, PRI_LOW, VAA(0x3c, 0x3b), VAA(0),
+		VAA(0x0f), VAA(4), ap2_temp),
+
+	PWRITE(temp1_crit, 0, PRI_LOW, 0x6a, 0, 0, 0, temp8),
+	PWRITE(temp2_crit, 1, PRI_LOW, 0x6b, 0, 0, 0, temp8),
+	PWRITE(temp3_crit, 2, PRI_LOW, 0x6c, 0, 0, 0, temp8),
+	PWRITE(temp4_crit, 3, PRI_LOW, 0x3d, 0, 0, 0, temp8),
+
+	PWRITE(temp5_enable, 4, PRI_LOW, 0x0e, 0, 0x01, 0, bitmask),
+	PWRITE(temp6_enable, 5, PRI_LOW, 0x0e, 0, 0x01, 1, bitmask),
+	PWRITE(temp7_enable, 6, PRI_LOW, 0x0e, 0, 0x01, 2, bitmask),
+	PWRITE(temp8_enable, 7, PRI_LOW, 0x0e, 0, 0x01, 3, bitmask),
+
+	PWRITE(remote1_offset, 0, PRI_LOW, 0x1c, 0, 0, 0, temp62),
+	PWRITE(remote2_offset, 1, PRI_LOW, 0x1d, 0, 0, 0, temp62),
+
+	PWRITE(pwm1, 0, PRI_HIGH, 0x30, 0, 0, 0, u8),
+	PWRITE(pwm2, 1, PRI_HIGH, 0x31, 0, 0, 0, u8),
+	PWRITE(pwm3, 2, PRI_HIGH, 0x32, 0, 0, 0, u8),
+
+	PWRITE(pwm1_invert, 0, PRI_LOW, 0x5c, 0, 0x01, 4, bitmask),
+	PWRITE(pwm2_invert, 1, PRI_LOW, 0x5d, 0, 0x01, 4, bitmask),
+	PWRITE(pwm3_invert, 2, PRI_LOW, 0x5e, 0, 0x01, 4, bitmask),
+
+	PWRITEM(pwm1_enable, 0, PRI_LOW, VAA(0x5c, 0x5c, 0x62), VAA(0, 0, 0),
+		VAA(0x07, 0x01, 0x01), VAA(5, 3, 5), pwm_enable),
+	PWRITEM(pwm2_enable, 1, PRI_LOW, VAA(0x5d, 0x5d, 0x62), VAA(0, 0, 0),
+		VAA(0x07, 0x01, 0x01), VAA(5, 3, 6), pwm_enable),
+	PWRITEM(pwm3_enable, 2, PRI_LOW, VAA(0x5e, 0x5e, 0x62), VAA(0, 0, 0),
+		VAA(0x07, 0x01, 0x01), VAA(5, 3, 7), pwm_enable),
+
+	PWRITEM(pwm1_auto_channels, 0, PRI_LOW, VAA(0x5c, 0x5c), VAA(0, 0),
+		VAA(0x07, 0x01), VAA(5, 3), pwm_ac),
+	PWRITEM(pwm2_auto_channels, 1, PRI_LOW, VAA(0x5d, 0x5d), VAA(0, 0),
+		VAA(0x07, 0x01), VAA(5, 3), pwm_ac),
+	PWRITEM(pwm3_auto_channels, 2, PRI_LOW, VAA(0x5e, 0x5e), VAA(0, 0),
+		VAA(0x07, 0x01), VAA(5, 3), pwm_ac),
+
+	PWRITE(pwm1_auto_point1_pwm, 0, PRI_LOW, 0x64, 0, 0, 0, u8),
+	PWRITE(pwm2_auto_point1_pwm, 1, PRI_LOW, 0x65, 0, 0, 0, u8),
+	PWRITE(pwm3_auto_point1_pwm, 2, PRI_LOW, 0x66, 0, 0, 0, u8),
+
+	PWRITE(pwm1_auto_point2_pwm, 0, PRI_LOW, 0x38, 0, 0, 0, u8),
+	PWRITE(pwm2_auto_point2_pwm, 1, PRI_LOW, 0x39, 0, 0, 0, u8),
+	PWRITE(pwm3_auto_point2_pwm, 2, PRI_LOW, 0x3a, 0, 0, 0, u8),
+
+	PWRITE(pwm1_freq, 0, PRI_LOW, 0x5f, 0, 0x0f, 0, pwm_freq),
+	PWRITE(pwm2_freq, 1, PRI_LOW, 0x60, 0, 0x0f, 0, pwm_freq),
+	PWRITE(pwm3_freq, 2, PRI_LOW, 0x61, 0, 0x0f, 0, pwm_freq),
+
+	PREAD(pwm1_auto_zone_assigned, 0, PRI_LOW, 0, 0, 0x03, 2, bitmask),
+	PREAD(pwm2_auto_zone_assigned, 1, PRI_LOW, 0, 0, 0x03, 4, bitmask),
+	PREAD(pwm3_auto_zone_assigned, 2, PRI_LOW, 0, 0, 0x03, 6, bitmask),
+
+	PWRITE(pwm1_auto_spinup_time, 0, PRI_LOW, 0x5c, 0, 0x07, 0, pwm_ast),
+	PWRITE(pwm2_auto_spinup_time, 1, PRI_LOW, 0x5d, 0, 0x07, 0, pwm_ast),
+	PWRITE(pwm3_auto_spinup_time, 2, PRI_LOW, 0x5e, 0, 0x07, 0, pwm_ast),
+
+	PWRITE(peci_enable, 0, PRI_LOW, 0x40, 0, 0x01, 4, bitmask),
+	PWRITE(peci_avg, 0, PRI_LOW, 0x36, 0, 0x07, 0, bitmask),
+	PWRITE(peci_domain, 0, PRI_LOW, 0x36, 0, 0x01, 3, bitmask),
+	PWRITE(peci_legacy, 0, PRI_LOW, 0x36, 0, 0x01, 4, bitmask),
+	PWRITE(peci_diode, 0, PRI_LOW, 0x0e, 0, 0x07, 4, bitmask),
+	PWRITE(peci_4domain, 0, PRI_LOW, 0x0e, 0, 0x01, 4, bitmask),
+
+};
+
+static struct asc7621_data *asc7621_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asc7621_data *data = i2c_get_clientdata(client);
+	int i;
+
+/*
+ * The asc7621 chips guarantee consistent reads of multi-byte values
+ * regardless of the order of the reads.  No special logic is needed
+ * so we can just read the registers in whatever  order they appear
+ * in the asc7621_params array.
+ */
+
+	mutex_lock(&data->update_lock);
+
+	/* Read all the high priority registers */
+
+	if (!data->valid ||
+	    time_after(jiffies, data->last_high_reading + INTERVAL_HIGH)) {
+
+		for (i = 0; i < ARRAY_SIZE(asc7621_register_priorities); i++) {
+			if (asc7621_register_priorities[i] == PRI_HIGH) {
+				data->reg[i] =
+				    i2c_smbus_read_byte_data(client, i) & 0xff;
+			}
+		}
+		data->last_high_reading = jiffies;
+	};			/* last_reading */
+
+	/* Read all the low priority registers. */
+
+	if (!data->valid ||
+	    time_after(jiffies, data->last_low_reading + INTERVAL_LOW)) {
+
+		for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
+			if (asc7621_register_priorities[i] == PRI_LOW) {
+				data->reg[i] =
+				    i2c_smbus_read_byte_data(client, i) & 0xff;
+			}
+		}
+		data->last_low_reading = jiffies;
+	};			/* last_reading */
+
+	data->valid = 1;
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/*
+ * Standard detection and initialization below
+ *
+ * Helper function that checks if an address is valid
+ * for a particular chip.
+ */
+
+static inline int valid_address_for_chip(int chip_type, int address)
+{
+	int i;
+
+	for (i = 0; asc7621_chips[chip_type].addresses[i] != I2C_CLIENT_END;
+	     i++) {
+		if (asc7621_chips[chip_type].addresses[i] == address)
+			return 1;
+	}
+	return 0;
+}
+
+static void asc7621_init_client(struct i2c_client *client)
+{
+	int value;
+
+	/* Warn if part was not "READY" */
+
+	value = read_byte(client, 0x40);
+
+	if (value & 0x02) {
+		dev_err(&client->dev,
+			"Client (%d,0x%02x) config is locked.\n",
+			i2c_adapter_id(client->adapter), client->addr);
+	};
+	if (!(value & 0x04)) {
+		dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
+			i2c_adapter_id(client->adapter), client->addr);
+	};
+
+/*
+ * Start monitoring
+ *
+ * Try to clear LOCK, Set START, save everything else
+ */
+	value = (value & ~0x02) | 0x01;
+	write_byte(client, 0x40, value & 0xff);
+
+}
+
+static int
+asc7621_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct asc7621_data *data;
+	int i, err;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	data = kzalloc(sizeof(struct asc7621_data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->valid = 0;
+	mutex_init(&data->update_lock);
+
+	/* Initialize the asc7621 chip */
+	asc7621_init_client(client);
+
+	/* Create the sysfs entries */
+	for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
+		err =
+		    device_create_file(&client->dev,
+				       &(asc7621_params[i].sda.dev_attr));
+		if (err)
+			goto exit_remove;
+	}
+
+	data->class_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->class_dev)) {
+		err = PTR_ERR(data->class_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
+		device_remove_file(&client->dev,
+				   &(asc7621_params[i].sda.dev_attr));
+	}
+
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return err;
+}
+
+static int asc7621_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int company, verstep, chip_index;
+	struct device *dev;
+
+	dev = &client->dev;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	for (chip_index = FIRST_CHIP; chip_index <= LAST_CHIP; chip_index++) {
+
+		if (!valid_address_for_chip(chip_index, client->addr))
+			continue;
+
+		company = read_byte(client,
+			asc7621_chips[chip_index].company_reg);
+		verstep = read_byte(client,
+			asc7621_chips[chip_index].verstep_reg);
+
+		if (company == asc7621_chips[chip_index].company_id &&
+		    verstep == asc7621_chips[chip_index].verstep_id) {
+			strlcpy(client->name, asc7621_chips[chip_index].name,
+				I2C_NAME_SIZE);
+			strlcpy(info->type, asc7621_chips[chip_index].name,
+				I2C_NAME_SIZE);
+
+			dev_info(&adapter->dev, "Matched %s\n",
+				 asc7621_chips[chip_index].name);
+			return 0;
+		}
+	}
+
+	return -ENODEV;
+}
+
+static int asc7621_remove(struct i2c_client *client)
+{
+	struct asc7621_data *data = i2c_get_clientdata(client);
+	int i;
+
+	hwmon_device_unregister(data->class_dev);
+
+	for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
+		device_remove_file(&client->dev,
+				   &(asc7621_params[i].sda.dev_attr));
+	}
+
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id asc7621_id[] = {
+	{"asc7621", asc7621},
+	{"asc7621a", asc7621a},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, asc7621_id);
+
+static struct i2c_driver asc7621_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "asc7621",
+	},
+	.probe = asc7621_probe,
+	.remove = asc7621_remove,
+	.id_table = asc7621_id,
+	.detect = asc7621_detect,
+	.address_list = normal_i2c,
+};
+
+static int __init sm_asc7621_init(void)
+{
+	int i, j;
+/*
+ * Collect all the registers needed into a single array.
+ * This way, if a register isn't actually used for anything,
+ * we don't retrieve it.
+ */
+
+	for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
+		for (j = 0; j < ARRAY_SIZE(asc7621_params[i].msb); j++)
+			asc7621_register_priorities[asc7621_params[i].msb[j]] =
+			    asc7621_params[i].priority;
+		for (j = 0; j < ARRAY_SIZE(asc7621_params[i].lsb); j++)
+			asc7621_register_priorities[asc7621_params[i].lsb[j]] =
+			    asc7621_params[i].priority;
+	}
+	return i2c_add_driver(&asc7621_driver);
+}
+
+static void __exit sm_asc7621_exit(void)
+{
+	i2c_del_driver(&asc7621_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("George Joseph");
+MODULE_DESCRIPTION("Andigilog aSC7621 and aSC7621a driver");
+
+module_init(sm_asc7621_init);
+module_exit(sm_asc7621_exit);
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index fa0728232e7..0627f7a5b9b 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -267,7 +267,7 @@ struct fschmd_data {
 	struct list_head list; /* member of the watchdog_data_list */
 	struct kref kref;
 	struct miscdevice watchdog_miscdev;
-	int kind;
+	enum chips kind;
 	unsigned long watchdog_is_open;
 	char watchdog_expect_close;
 	char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
@@ -325,8 +325,7 @@ static ssize_t show_in_value(struct device *dev,
 	int index = to_sensor_dev_attr(devattr)->index;
 	struct fschmd_data *data = fschmd_update_device(dev);
 
-	/* fscher / fschrc - 1 as data->kind is an array index, not a chips */
-	if (data->kind == (fscher - 1) || data->kind >= (fschrc - 1))
+	if (data->kind == fscher || data->kind >= fschrc)
 		return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref *
 			dmi_mult[index]) / 255 + dmi_offset[index]);
 	else
@@ -492,7 +491,7 @@ static ssize_t show_pwm_auto_point1_pwm(struct device *dev,
 	int val = data->fan_min[index];
 
 	/* 0 = allow turning off (except on the syl), 1-255 = 50-100% */
-	if (val || data->kind == fscsyl - 1)
+	if (val || data->kind == fscsyl)
 		val = val / 2 + 128;
 
 	return sprintf(buf, "%d\n", val);
@@ -506,7 +505,7 @@ static ssize_t store_pwm_auto_point1_pwm(struct device *dev,
 	unsigned long v = simple_strtoul(buf, NULL, 10);
 
 	/* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */
-	if (v || data->kind == fscsyl - 1) {
+	if (v || data->kind == fscsyl) {
 		v = SENSORS_LIMIT(v, 128, 255);
 		v = (v - 128) * 2 + 1;
 	}
@@ -1037,7 +1036,7 @@ static int fschmd_detect(struct i2c_client *client,
 	else
 		return -ENODEV;
 
-	strlcpy(info->type, fschmd_id[kind - 1].name, I2C_NAME_SIZE);
+	strlcpy(info->type, fschmd_id[kind].name, I2C_NAME_SIZE);
 
 	return 0;
 }
@@ -1065,6 +1064,7 @@ static int fschmd_probe(struct i2c_client *client,
 	   (where the client is found through a data ptr instead of the
 	   otherway around) */
 	data->client = client;
+	data->kind = kind;
 
 	if (kind == fscpos) {
 		/* The Poseidon has hardwired temp limits, fill these
@@ -1085,9 +1085,6 @@ static int fschmd_probe(struct i2c_client *client,
 		}
 	}
 
-	/* i2c kind goes from 1-6, we want from 0-5 to address arrays */
-	data->kind = kind - 1;
-
 	/* Read in some never changing registers */
 	data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
 	data->global_control = i2c_smbus_read_byte_data(client,
diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
index 19c01a49f6b..09ea12e0a55 100644
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@@ -68,7 +68,7 @@ struct g760a_data {
 #define PWM_FROM_CNT(cnt)	(0xff-(cnt))
 #define PWM_TO_CNT(pwm)		(0xff-(pwm))
 
-unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
+static inline unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
 {
 	return ((val == 0x00) ? 0 : ((clk*30)/(val*div)));
 }
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 0ffe84d190b..1002befd87d 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1,40 +1,40 @@
 /*
-    it87.c - Part of lm_sensors, Linux kernel modules for hardware
-             monitoring.
-
-    The IT8705F is an LPC-based Super I/O part that contains UARTs, a
-    parallel port, an IR port, a MIDI port, a floppy controller, etc., in
-    addition to an Environment Controller (Enhanced Hardware Monitor and
-    Fan Controller)
-
-    This driver supports only the Environment Controller in the IT8705F and
-    similar parts.  The other devices are supported by different drivers.
-
-    Supports: IT8705F  Super I/O chip w/LPC interface
-              IT8712F  Super I/O chip w/LPC interface
-              IT8716F  Super I/O chip w/LPC interface
-              IT8718F  Super I/O chip w/LPC interface
-              IT8720F  Super I/O chip w/LPC interface
-              IT8726F  Super I/O chip w/LPC interface
-              Sis950   A clone of the IT8705F
-
-    Copyright (C) 2001 Chris Gauthron
-    Copyright (C) 2005-2007 Jean Delvare <khali@linux-fr.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ *  it87.c - Part of lm_sensors, Linux kernel modules for hardware
+ *           monitoring.
+ *
+ *  The IT8705F is an LPC-based Super I/O part that contains UARTs, a
+ *  parallel port, an IR port, a MIDI port, a floppy controller, etc., in
+ *  addition to an Environment Controller (Enhanced Hardware Monitor and
+ *  Fan Controller)
+ *
+ *  This driver supports only the Environment Controller in the IT8705F and
+ *  similar parts.  The other devices are supported by different drivers.
+ *
+ *  Supports: IT8705F  Super I/O chip w/LPC interface
+ *            IT8712F  Super I/O chip w/LPC interface
+ *            IT8716F  Super I/O chip w/LPC interface
+ *            IT8718F  Super I/O chip w/LPC interface
+ *            IT8720F  Super I/O chip w/LPC interface
+ *            IT8726F  Super I/O chip w/LPC interface
+ *            Sis950   A clone of the IT8705F
+ *
+ *  Copyright (C) 2001 Chris Gauthron
+ *  Copyright (C) 2005-2010 Jean Delvare <khali@linux-fr.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -128,6 +128,7 @@ superio_exit(void)
 #define IT87_SIO_GPIO5_REG	0x29
 #define IT87_SIO_PINX2_REG	0x2c	/* Pin selection */
 #define IT87_SIO_VID_REG	0xfc	/* VID value */
+#define IT87_SIO_BEEP_PIN_REG	0xf6	/* Beep pin mapping */
 
 /* Update battery voltage after every reading if true */
 static int update_vbat;
@@ -187,9 +188,13 @@ static const u8 IT87_REG_FANX_MIN[]	= { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
 
 #define IT87_REG_VIN_ENABLE    0x50
 #define IT87_REG_TEMP_ENABLE   0x51
+#define IT87_REG_BEEP_ENABLE   0x5c
 
 #define IT87_REG_CHIPID        0x58
 
+#define IT87_REG_AUTO_TEMP(nr, i) (0x60 + (nr) * 8 + (i))
+#define IT87_REG_AUTO_PWM(nr, i)  (0x65 + (nr) * 8 + (i))
+
 #define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
 #define IN_FROM_REG(val) ((val) * 16)
 
@@ -246,6 +251,7 @@ struct it87_sio_data {
 	/* Values read from Super-I/O config space */
 	u8 revision;
 	u8 vid_value;
+	u8 beep_pin;
 	/* Features skipped based on config or DMI */
 	u8 skip_vid;
 	u8 skip_fan;
@@ -279,9 +285,21 @@ struct it87_data {
 	u8 vid;			/* Register encoding, combined */
 	u8 vrm;
 	u32 alarms;		/* Register encoding, combined */
+	u8 beeps;		/* Register encoding */
 	u8 fan_main_ctrl;	/* Register value */
 	u8 fan_ctl;		/* Register value */
-	u8 manual_pwm_ctl[3];   /* manual PWM value set by user */
+
+	/* The following 3 arrays correspond to the same registers. The
+	 * meaning of bits 6-0 depends on the value of bit 7, and we want
+	 * to preserve settings on mode changes, so we have to track all
+	 * values separately. */
+	u8 pwm_ctrl[3];		/* Register value */
+	u8 pwm_duty[3];		/* Manual PWM value set by user (bit 6-0) */
+	u8 pwm_temp_map[3];	/* PWM to temp. chan. mapping (bits 1-0) */
+
+	/* Automatic fan speed control registers */
+	u8 auto_pwm[3][4];	/* [nr][3] is hard-coded */
+	s8 auto_temp[3][5];	/* [nr][0] is point1_temp_hyst */
 };
 
 static inline int has_16bit_fans(const struct it87_data *data)
@@ -296,6 +314,15 @@ static inline int has_16bit_fans(const struct it87_data *data)
 	    || data->type == it8720;
 }
 
+static inline int has_old_autopwm(const struct it87_data *data)
+{
+	/* The old automatic fan speed control interface is implemented
+	   by IT8705F chips up to revision F and IT8712F chips up to
+	   revision G. */
+	return (data->type == it87 && data->revision < 0x03)
+	    || (data->type == it8712 && data->revision < 0x08);
+}
+
 static int it87_probe(struct platform_device *pdev);
 static int __devexit it87_remove(struct platform_device *pdev);
 
@@ -352,7 +379,10 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	data->in_min[nr] = IN_TO_REG(val);
@@ -368,7 +398,10 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	data->in_max[nr] = IN_TO_REG(val);
@@ -441,7 +474,10 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	data->temp_high[nr] = TEMP_TO_REG(val);
@@ -456,7 +492,10 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	data->temp_low[nr] = TEMP_TO_REG(val);
@@ -483,8 +522,9 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	u8 reg = data->sensor; /* In case the value is updated while we use it */
-	
+	u8 reg = data->sensor;		/* In case the value is updated while
+					   we use it */
+
 	if (reg & (1 << nr))
 		return sprintf(buf, "3\n");  /* thermal diode */
 	if (reg & (8 << nr))
@@ -498,7 +538,10 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 
@@ -511,9 +554,9 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
 	}
 	/* 3 = thermal diode; 4 = thermistor; 0 = disabled */
 	if (val == 3)
-	    data->sensor |= 1 << nr;
+		data->sensor |= 1 << nr;
 	else if (val == 4)
-	    data->sensor |= 8 << nr;
+		data->sensor |= 8 << nr;
 	else if (val != 0) {
 		mutex_unlock(&data->update_lock);
 		return -EINVAL;
@@ -531,6 +574,19 @@ show_sensor_offset(2);
 show_sensor_offset(3);
 
 /* 3 Fans */
+
+static int pwm_mode(const struct it87_data *data, int nr)
+{
+	int ctrl = data->fan_main_ctrl & (1 << nr);
+
+	if (ctrl == 0)					/* Full speed */
+		return 0;
+	if (data->pwm_ctrl[nr] & 0x80)			/* Automatic mode */
+		return 2;
+	else						/* Manual mode */
+		return 1;
+}
+
 static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
@@ -538,7 +594,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], 
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
 				DIV_FROM_REG(data->fan_div[nr])));
 }
 static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
@@ -548,8 +604,8 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	return sprintf(buf,"%d\n",
-		FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])));
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+				DIV_FROM_REG(data->fan_div[nr])));
 }
 static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -560,14 +616,14 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
 	struct it87_data *data = it87_update_device(dev);
 	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
 }
-static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr,
-		char *buf)
+static ssize_t show_pwm_enable(struct device *dev,
+		struct device_attribute *attr, char *buf)
 {
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0);
+	return sprintf(buf, "%d\n", pwm_mode(data, nr));
 }
 static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -576,7 +632,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = it87_update_device(dev);
-	return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]);
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm_duty[nr]));
 }
 static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -593,15 +649,24 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
 	u8 reg;
 
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
 	reg = it87_read_value(data, IT87_REG_FAN_DIV);
 	switch (nr) {
-	case 0: data->fan_div[nr] = reg & 0x07; break;
-	case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
-	case 2: data->fan_div[nr] = (reg & 0x40) ? 3 : 1; break;
+	case 0:
+		data->fan_div[nr] = reg & 0x07;
+		break;
+	case 1:
+		data->fan_div[nr] = (reg >> 3) & 0x07;
+		break;
+	case 2:
+		data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
+		break;
 	}
 
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
@@ -616,10 +681,13 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
 	int min;
 	u8 old;
 
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
 	old = it87_read_value(data, IT87_REG_FAN_DIV);
 
@@ -651,6 +719,32 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	mutex_unlock(&data->update_lock);
 	return count;
 }
+
+/* Returns 0 if OK, -EINVAL otherwise */
+static int check_trip_points(struct device *dev, int nr)
+{
+	const struct it87_data *data = dev_get_drvdata(dev);
+	int i, err = 0;
+
+	if (has_old_autopwm(data)) {
+		for (i = 0; i < 3; i++) {
+			if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
+				err = -EINVAL;
+		}
+		for (i = 0; i < 2; i++) {
+			if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
+				err = -EINVAL;
+		}
+	}
+
+	if (err) {
+		dev_err(dev, "Inconsistent trip points, not switching to "
+			"automatic mode\n");
+		dev_err(dev, "Adjust the trip points and try again\n");
+	}
+	return err;
+}
+
 static ssize_t set_pwm_enable(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
@@ -658,7 +752,16 @@ static ssize_t set_pwm_enable(struct device *dev,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 2)
+		return -EINVAL;
+
+	/* Check trip points before switching to automatic mode */
+	if (val == 2) {
+		if (check_trip_points(dev, nr) < 0)
+			return -EINVAL;
+	}
 
 	mutex_lock(&data->update_lock);
 
@@ -669,16 +772,18 @@ static ssize_t set_pwm_enable(struct device *dev,
 		it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr));
 		/* set on/off mode */
 		data->fan_main_ctrl &= ~(1 << nr);
-		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
-	} else if (val == 1) {
+		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+				 data->fan_main_ctrl);
+	} else {
+		if (val == 1)				/* Manual mode */
+			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+		else					/* Automatic mode */
+			data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
+		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
 		/* set SmartGuardian mode */
 		data->fan_main_ctrl |= (1 << nr);
-		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
-		/* set saved pwm value, clear FAN_CTLX PWM mode bit */
-		it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
-	} else {
-		mutex_unlock(&data->update_lock);
-		return -EINVAL;
+		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+				 data->fan_main_ctrl);
 	}
 
 	mutex_unlock(&data->update_lock);
@@ -691,15 +796,19 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 
 	struct it87_data *data = dev_get_drvdata(dev);
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
 
-	if (val < 0 || val > 255)
+	if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 255)
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
-	data->manual_pwm_ctl[nr] = val;
-	if (data->fan_main_ctrl & (1 << nr))
-		it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+	data->pwm_duty[nr] = PWM_TO_REG(val);
+	/* If we are in manual mode, write the duty cycle immediately;
+	 * otherwise, just store it for later use. */
+	if (!(data->pwm_ctrl[nr] & 0x80)) {
+		data->pwm_ctrl[nr] = data->pwm_duty[nr];
+		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+	}
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -707,9 +816,12 @@ static ssize_t set_pwm_freq(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct it87_data *data = dev_get_drvdata(dev);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
 	int i;
 
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
 	/* Search for the nearest available frequency */
 	for (i = 0; i < 7; i++) {
 		if (val > (pwm_freq[i] + pwm_freq[i+1]) / 2)
@@ -724,6 +836,132 @@ static ssize_t set_pwm_freq(struct device *dev,
 
 	return count;
 }
+static ssize_t show_pwm_temp_map(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = it87_update_device(dev);
+	int map;
+
+	if (data->pwm_temp_map[nr] < 3)
+		map = 1 << data->pwm_temp_map[nr];
+	else
+		map = 0;			/* Should never happen */
+	return sprintf(buf, "%d\n", map);
+}
+static ssize_t set_pwm_temp_map(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = dev_get_drvdata(dev);
+	long val;
+	u8 reg;
+
+	/* This check can go away if we ever support automatic fan speed
+	   control on newer chips. */
+	if (!has_old_autopwm(data)) {
+		dev_notice(dev, "Mapping change disabled for safety reasons\n");
+		return -EINVAL;
+	}
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	switch (val) {
+	case (1 << 0):
+		reg = 0x00;
+		break;
+	case (1 << 1):
+		reg = 0x01;
+		break;
+	case (1 << 2):
+		reg = 0x02;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->update_lock);
+	data->pwm_temp_map[nr] = reg;
+	/* If we are in automatic mode, write the temp mapping immediately;
+	 * otherwise, just store it for later use. */
+	if (data->pwm_ctrl[nr] & 0x80) {
+		data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
+		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_auto_pwm(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+			to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int point = sensor_attr->index;
+
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->auto_pwm[nr][point]));
+}
+
+static ssize_t set_auto_pwm(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+			to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int point = sensor_attr->index;
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0 || val < 0 || val > 255)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->auto_pwm[nr][point] = PWM_TO_REG(val);
+	it87_write_value(data, IT87_REG_AUTO_PWM(nr, point),
+			 data->auto_pwm[nr][point]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_auto_temp(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+			to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int point = sensor_attr->index;
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->auto_temp[nr][point]));
+}
+
+static ssize_t set_auto_temp(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+			to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int point = sensor_attr->index;
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0 || val < -128000 || val > 127000)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->auto_temp[nr][point] = TEMP_TO_REG(val);
+	it87_write_value(data, IT87_REG_AUTO_TEMP(nr, point),
+			 data->auto_temp[nr][point]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
 
 #define show_fan_offset(offset)					\
 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,		\
@@ -744,7 +982,36 @@ static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,		\
 		show_pwm, set_pwm, offset - 1);				\
 static DEVICE_ATTR(pwm##offset##_freq,					\
 		(offset == 1 ? S_IRUGO | S_IWUSR : S_IRUGO),		\
-		show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL));
+		show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL));	\
+static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels_temp,		\
+		S_IRUGO | S_IWUSR, show_pwm_temp_map, set_pwm_temp_map,	\
+		offset - 1);						\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_pwm,		\
+		S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm,		\
+		offset - 1, 0);						\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_pwm,		\
+		S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm,		\
+		offset - 1, 1);						\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_pwm,		\
+		S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm,		\
+		offset - 1, 2);						\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_pwm,		\
+		S_IRUGO, show_auto_pwm, NULL, offset - 1, 3);		\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp,		\
+		S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,	\
+		offset - 1, 1);						\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp_hyst,	\
+		S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,	\
+		offset - 1, 0);						\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_temp,		\
+		S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,	\
+		offset - 1, 2);						\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_temp,		\
+		S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,	\
+		offset - 1, 3);						\
+static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_temp,		\
+		S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp,	\
+		offset - 1, 4);
 
 show_pwm_offset(1);
 show_pwm_offset(2);
@@ -775,7 +1042,10 @@ static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
 	struct it87_data *data = dev_get_drvdata(dev);
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN16_TO_REG(val);
@@ -805,7 +1075,8 @@ show_fan16_offset(4);
 show_fan16_offset(5);
 
 /* Alarms */
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+		char *buf)
 {
 	struct it87_data *data = it87_update_device(dev);
 	return sprintf(buf, "%u\n", data->alarms);
@@ -836,27 +1107,78 @@ static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
 
-static ssize_t
-show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
+}
+static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct it87_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0
+	 || (val != 0 && val != 1))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+	if (val)
+		data->beeps |= (1 << bitnr);
+	else
+		data->beeps &= ~(1 << bitnr);
+	it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
+			  show_beep, set_beep, 1);
+static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
+/* fanX_beep writability is set later */
+static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
+			  show_beep, set_beep, 2);
+static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
+
+static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
+		char *buf)
 {
 	struct it87_data *data = dev_get_drvdata(dev);
 	return sprintf(buf, "%u\n", data->vrm);
 }
-static ssize_t
-store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
 {
 	struct it87_data *data = dev_get_drvdata(dev);
-	u32 val;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
 
-	val = simple_strtoul(buf, NULL, 10);
 	data->vrm = val;
 
 	return count;
 }
 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 
-static ssize_t
-show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
+		char *buf)
 {
 	struct it87_data *data = it87_update_device(dev);
 	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
@@ -931,51 +1253,176 @@ static const struct attribute_group it87_group = {
 	.attrs = it87_attributes,
 };
 
-static struct attribute *it87_attributes_opt[] = {
+static struct attribute *it87_attributes_beep[] = {
+	&sensor_dev_attr_in0_beep.dev_attr.attr,
+	&sensor_dev_attr_in1_beep.dev_attr.attr,
+	&sensor_dev_attr_in2_beep.dev_attr.attr,
+	&sensor_dev_attr_in3_beep.dev_attr.attr,
+	&sensor_dev_attr_in4_beep.dev_attr.attr,
+	&sensor_dev_attr_in5_beep.dev_attr.attr,
+	&sensor_dev_attr_in6_beep.dev_attr.attr,
+	&sensor_dev_attr_in7_beep.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_beep.dev_attr.attr,
+	&sensor_dev_attr_temp2_beep.dev_attr.attr,
+	&sensor_dev_attr_temp3_beep.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group it87_group_beep = {
+	.attrs = it87_attributes_beep,
+};
+
+static struct attribute *it87_attributes_fan16[5][3+1] = { {
 	&sensor_dev_attr_fan1_input16.dev_attr.attr,
 	&sensor_dev_attr_fan1_min16.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	NULL
+}, {
 	&sensor_dev_attr_fan2_input16.dev_attr.attr,
 	&sensor_dev_attr_fan2_min16.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	NULL
+}, {
 	&sensor_dev_attr_fan3_input16.dev_attr.attr,
 	&sensor_dev_attr_fan3_min16.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	NULL
+}, {
 	&sensor_dev_attr_fan4_input16.dev_attr.attr,
 	&sensor_dev_attr_fan4_min16.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+	NULL
+}, {
 	&sensor_dev_attr_fan5_input16.dev_attr.attr,
 	&sensor_dev_attr_fan5_min16.dev_attr.attr,
+	&sensor_dev_attr_fan5_alarm.dev_attr.attr,
+	NULL
+} };
+
+static const struct attribute_group it87_group_fan16[5] = {
+	{ .attrs = it87_attributes_fan16[0] },
+	{ .attrs = it87_attributes_fan16[1] },
+	{ .attrs = it87_attributes_fan16[2] },
+	{ .attrs = it87_attributes_fan16[3] },
+	{ .attrs = it87_attributes_fan16[4] },
+};
 
+static struct attribute *it87_attributes_fan[3][4+1] = { {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_min.dev_attr.attr,
 	&sensor_dev_attr_fan1_div.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	NULL
+}, {
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_min.dev_attr.attr,
 	&sensor_dev_attr_fan2_div.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	NULL
+}, {
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_min.dev_attr.attr,
 	&sensor_dev_attr_fan3_div.dev_attr.attr,
-
-	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan5_alarm.dev_attr.attr,
+	NULL
+} };
+
+static const struct attribute_group it87_group_fan[3] = {
+	{ .attrs = it87_attributes_fan[0] },
+	{ .attrs = it87_attributes_fan[1] },
+	{ .attrs = it87_attributes_fan[2] },
+};
+
+static const struct attribute_group *
+it87_get_fan_group(const struct it87_data *data)
+{
+	return has_16bit_fans(data) ? it87_group_fan16 : it87_group_fan;
+}
 
+static struct attribute *it87_attributes_pwm[3][4+1] = { {
 	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
 	&sensor_dev_attr_pwm1.dev_attr.attr,
-	&sensor_dev_attr_pwm2.dev_attr.attr,
-	&sensor_dev_attr_pwm3.dev_attr.attr,
 	&dev_attr_pwm1_freq.attr,
+	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+	NULL
+}, {
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
 	&dev_attr_pwm2_freq.attr,
+	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+	NULL
+}, {
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
 	&dev_attr_pwm3_freq.attr,
+	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+	NULL
+} };
+
+static const struct attribute_group it87_group_pwm[3] = {
+	{ .attrs = it87_attributes_pwm[0] },
+	{ .attrs = it87_attributes_pwm[1] },
+	{ .attrs = it87_attributes_pwm[2] },
+};
 
+static struct attribute *it87_attributes_autopwm[3][9+1] = { {
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
+	NULL
+}, {
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
+	NULL
+}, {
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
+	NULL
+} };
+
+static const struct attribute_group it87_group_autopwm[3] = {
+	{ .attrs = it87_attributes_autopwm[0] },
+	{ .attrs = it87_attributes_autopwm[1] },
+	{ .attrs = it87_attributes_autopwm[2] },
+};
+
+static struct attribute *it87_attributes_fan_beep[] = {
+	&sensor_dev_attr_fan1_beep.dev_attr.attr,
+	&sensor_dev_attr_fan2_beep.dev_attr.attr,
+	&sensor_dev_attr_fan3_beep.dev_attr.attr,
+	&sensor_dev_attr_fan4_beep.dev_attr.attr,
+	&sensor_dev_attr_fan5_beep.dev_attr.attr,
+};
+
+static struct attribute *it87_attributes_vid[] = {
 	&dev_attr_vrm.attr,
 	&dev_attr_cpu0_vid.attr,
 	NULL
 };
 
-static const struct attribute_group it87_group_opt = {
-	.attrs = it87_attributes_opt,
+static const struct attribute_group it87_group_vid = {
+	.attrs = it87_attributes_vid,
 };
 
 /* SuperIO detection - will change isa_address if a chip is found */
@@ -1035,6 +1482,10 @@ static int __init it87_find(unsigned short *address,
 	if (sio_data->type == it87) {
 		/* The IT8705F doesn't have VID pins at all */
 		sio_data->skip_vid = 1;
+
+		/* The IT8705F has a different LD number for GPIO */
+		superio_select(5);
+		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	} else {
 		int reg;
 
@@ -1068,7 +1519,11 @@ static int __init it87_find(unsigned short *address,
 			pr_info("it87: in3 is VCC (+5V)\n");
 		if (reg & (1 << 1))
 			pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
+
+		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	}
+	if (sio_data->beep_pin)
+		pr_info("it87: Beeping is supported\n");
 
 	/* Disable specific features based on DMI strings */
 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
@@ -1093,14 +1548,46 @@ exit:
 	return err;
 }
 
+static void it87_remove_files(struct device *dev)
+{
+	struct it87_data *data = platform_get_drvdata(pdev);
+	struct it87_sio_data *sio_data = dev->platform_data;
+	const struct attribute_group *fan_group = it87_get_fan_group(data);
+	int i;
+
+	sysfs_remove_group(&dev->kobj, &it87_group);
+	if (sio_data->beep_pin)
+		sysfs_remove_group(&dev->kobj, &it87_group_beep);
+	for (i = 0; i < 5; i++) {
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		sysfs_remove_group(&dev->kobj, &fan_group[i]);
+		if (sio_data->beep_pin)
+			sysfs_remove_file(&dev->kobj,
+					  it87_attributes_fan_beep[i]);
+	}
+	for (i = 0; i < 3; i++) {
+		if (sio_data->skip_pwm & (1 << 0))
+			continue;
+		sysfs_remove_group(&dev->kobj, &it87_group_pwm[i]);
+		if (has_old_autopwm(data))
+			sysfs_remove_group(&dev->kobj,
+					   &it87_group_autopwm[i]);
+	}
+	if (!sio_data->skip_vid)
+		sysfs_remove_group(&dev->kobj, &it87_group_vid);
+}
+
 static int __devinit it87_probe(struct platform_device *pdev)
 {
 	struct it87_data *data;
 	struct resource *res;
 	struct device *dev = &pdev->dev;
 	struct it87_sio_data *sio_data = dev->platform_data;
-	int err = 0;
+	const struct attribute_group *fan_group;
+	int err = 0, i;
 	int enable_pwm_interface;
+	int fan_beep_need_rw;
 	static const char *names[] = {
 		"it87",
 		"it8712",
@@ -1118,7 +1605,8 @@ static int __devinit it87_probe(struct platform_device *pdev)
 		goto ERROR0;
 	}
 
-	if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) {
+	data = kzalloc(sizeof(struct it87_data), GFP_KERNEL);
+	if (!data) {
 		err = -ENOMEM;
 		goto ERROR1;
 	}
@@ -1146,120 +1634,60 @@ static int __devinit it87_probe(struct platform_device *pdev)
 	it87_init_device(pdev);
 
 	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&dev->kobj, &it87_group)))
+	err = sysfs_create_group(&dev->kobj, &it87_group);
+	if (err)
 		goto ERROR2;
 
+	if (sio_data->beep_pin) {
+		err = sysfs_create_group(&dev->kobj, &it87_group_beep);
+		if (err)
+			goto ERROR4;
+	}
+
 	/* Do not create fan files for disabled fans */
-	if (has_16bit_fans(data)) {
-		/* 16-bit tachometers */
-		if (data->has_fan & (1 << 0)) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_fan1_input16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan1_min16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan1_alarm.dev_attr)))
-				goto ERROR4;
-		}
-		if (data->has_fan & (1 << 1)) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_fan2_input16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan2_min16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan2_alarm.dev_attr)))
-				goto ERROR4;
-		}
-		if (data->has_fan & (1 << 2)) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_fan3_input16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan3_min16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan3_alarm.dev_attr)))
-				goto ERROR4;
-		}
-		if (data->has_fan & (1 << 3)) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_fan4_input16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan4_min16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan4_alarm.dev_attr)))
-				goto ERROR4;
-		}
-		if (data->has_fan & (1 << 4)) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_fan5_input16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan5_min16.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan5_alarm.dev_attr)))
-				goto ERROR4;
-		}
-	} else {
-		/* 8-bit tachometers with clock divider */
-		if (data->has_fan & (1 << 0)) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_fan1_input.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan1_min.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan1_div.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan1_alarm.dev_attr)))
-				goto ERROR4;
-		}
-		if (data->has_fan & (1 << 1)) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_fan2_input.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan2_min.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan2_div.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan2_alarm.dev_attr)))
-				goto ERROR4;
-		}
-		if (data->has_fan & (1 << 2)) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_fan3_input.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan3_min.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan3_div.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_fan3_alarm.dev_attr)))
+	fan_group = it87_get_fan_group(data);
+	fan_beep_need_rw = 1;
+	for (i = 0; i < 5; i++) {
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		err = sysfs_create_group(&dev->kobj, &fan_group[i]);
+		if (err)
+			goto ERROR4;
+
+		if (sio_data->beep_pin) {
+			err = sysfs_create_file(&dev->kobj,
+						it87_attributes_fan_beep[i]);
+			if (err)
 				goto ERROR4;
+			if (!fan_beep_need_rw)
+				continue;
+
+			/* As we have a single beep enable bit for all fans,
+			 * only the first enabled fan has a writable attribute
+			 * for it. */
+			if (sysfs_chmod_file(&dev->kobj,
+					     it87_attributes_fan_beep[i],
+					     S_IRUGO | S_IWUSR))
+				dev_dbg(dev, "chmod +w fan%d_beep failed\n",
+					i + 1);
+			fan_beep_need_rw = 0;
 		}
 	}
 
 	if (enable_pwm_interface) {
-		if (!(sio_data->skip_pwm & (1 << 0))) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_pwm1_enable.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_pwm1.dev_attr))
-			 || (err = device_create_file(dev,
-			     &dev_attr_pwm1_freq)))
-				goto ERROR4;
-		}
-		if (!(sio_data->skip_pwm & (1 << 1))) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_pwm2_enable.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_pwm2.dev_attr))
-			 || (err = device_create_file(dev,
-			     &dev_attr_pwm2_freq)))
+		for (i = 0; i < 3; i++) {
+			if (sio_data->skip_pwm & (1 << i))
+				continue;
+			err = sysfs_create_group(&dev->kobj,
+						 &it87_group_pwm[i]);
+			if (err)
 				goto ERROR4;
-		}
-		if (!(sio_data->skip_pwm & (1 << 2))) {
-			if ((err = device_create_file(dev,
-			     &sensor_dev_attr_pwm3_enable.dev_attr))
-			 || (err = device_create_file(dev,
-			     &sensor_dev_attr_pwm3.dev_attr))
-			 || (err = device_create_file(dev,
-			     &dev_attr_pwm3_freq)))
+
+			if (!has_old_autopwm(data))
+				continue;
+			err = sysfs_create_group(&dev->kobj,
+						 &it87_group_autopwm[i]);
+			if (err)
 				goto ERROR4;
 		}
 	}
@@ -1268,10 +1696,8 @@ static int __devinit it87_probe(struct platform_device *pdev)
 		data->vrm = vid_which_vrm();
 		/* VID reading from Super-I/O config space if available */
 		data->vid = sio_data->vid_value;
-		if ((err = device_create_file(dev,
-		     &dev_attr_vrm))
-		 || (err = device_create_file(dev,
-		     &dev_attr_cpu0_vid)))
+		err = sysfs_create_group(&dev->kobj, &it87_group_vid);
+		if (err)
 			goto ERROR4;
 	}
 
@@ -1284,8 +1710,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
 	return 0;
 
 ERROR4:
-	sysfs_remove_group(&dev->kobj, &it87_group);
-	sysfs_remove_group(&dev->kobj, &it87_group_opt);
+	it87_remove_files(dev);
 ERROR2:
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
@@ -1300,8 +1725,7 @@ static int __devexit it87_remove(struct platform_device *pdev)
 	struct it87_data *data = platform_get_drvdata(pdev);
 
 	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&pdev->dev.kobj, &it87_group);
-	sysfs_remove_group(&pdev->dev.kobj, &it87_group_opt);
+	it87_remove_files(&pdev->dev);
 
 	release_region(data->addr, IT87_EC_EXTENT);
 	platform_set_drvdata(pdev, NULL);
@@ -1387,15 +1811,18 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	int tmp, i;
 	u8 mask;
 
-	/* initialize to sane defaults:
-	 * - if the chip is in manual pwm mode, this will be overwritten with
-	 *   the actual settings on the chip (so in this case, initialization
-	 *   is not needed)
-	 * - if in automatic or on/off mode, we could switch to manual mode,
-	 *   read the registers and set manual_pwm_ctl accordingly, but currently
-	 *   this is not implemented, so we initialize to something sane */
+	/* For each PWM channel:
+	 * - If it is in automatic mode, setting to manual mode should set
+	 *   the fan to full speed by default.
+	 * - If it is in manual mode, we need a mapping to temperature
+	 *   channels to use when later setting to automatic mode later.
+	 *   Use a 1:1 mapping by default (we are clueless.)
+	 * In both cases, the value can (and should) be changed by the user
+	 * prior to switching to a different mode. */
 	for (i = 0; i < 3; i++) {
-		data->manual_pwm_ctl[i] = 0xff;
+		data->pwm_temp_map[i] = i;
+		data->pwm_duty[i] = 0x7f;	/* Full speed */
+		data->auto_pwm[i][3] = 0x7f;	/* Full speed, hard-coded */
 	}
 
 	/* Some chips seem to have default value 0xff for all limit
@@ -1436,7 +1863,8 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	if ((data->fan_main_ctrl & mask) == 0) {
 		/* Enable all fan tachometers */
 		data->fan_main_ctrl |= mask;
-		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+				 data->fan_main_ctrl);
 	}
 	data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
 
@@ -1461,30 +1889,32 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	/* Fan input pins may be used for alternative functions */
 	data->has_fan &= ~sio_data->skip_fan;
 
-	/* Set current fan mode registers and the default settings for the
-	 * other mode registers */
-	for (i = 0; i < 3; i++) {
-		if (data->fan_main_ctrl & (1 << i)) {
-			/* pwm mode */
-			tmp = it87_read_value(data, IT87_REG_PWM(i));
-			if (tmp & 0x80) {
-				/* automatic pwm - not yet implemented, but
-				 * leave the settings made by the BIOS alone
-				 * until a change is requested via the sysfs
-				 * interface */
-			} else {
-				/* manual pwm */
-				data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp);
-			}
-		}
- 	}
-
 	/* Start monitoring */
 	it87_write_value(data, IT87_REG_CONFIG,
 			 (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
 			 | (update_vbat ? 0x41 : 0x01));
 }
 
+static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
+{
+	data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
+	if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
+		data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+	else				/* Manual mode */
+		data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+
+	if (has_old_autopwm(data)) {
+		int i;
+
+		for (i = 0; i < 5 ; i++)
+			data->auto_temp[nr][i] = it87_read_value(data,
+						IT87_REG_AUTO_TEMP(nr, i));
+		for (i = 0; i < 3 ; i++)
+			data->auto_pwm[nr][i] = it87_read_value(data,
+						IT87_REG_AUTO_PWM(nr, i));
+	}
+}
+
 static struct it87_data *it87_update_device(struct device *dev)
 {
 	struct it87_data *data = dev_get_drvdata(dev);
@@ -1494,24 +1924,22 @@ static struct it87_data *it87_update_device(struct device *dev)
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
-
 		if (update_vbat) {
 			/* Cleared after each update, so reenable.  Value
-		 	  returned by this read will be previous value */	
+			   returned by this read will be previous value */
 			it87_write_value(data, IT87_REG_CONFIG,
-			   it87_read_value(data, IT87_REG_CONFIG) | 0x40);
+				it87_read_value(data, IT87_REG_CONFIG) | 0x40);
 		}
 		for (i = 0; i <= 7; i++) {
 			data->in[i] =
-			    it87_read_value(data, IT87_REG_VIN(i));
+				it87_read_value(data, IT87_REG_VIN(i));
 			data->in_min[i] =
-			    it87_read_value(data, IT87_REG_VIN_MIN(i));
+				it87_read_value(data, IT87_REG_VIN_MIN(i));
 			data->in_max[i] =
-			    it87_read_value(data, IT87_REG_VIN_MAX(i));
+				it87_read_value(data, IT87_REG_VIN_MAX(i));
 		}
 		/* in8 (battery) has no limit registers */
-		data->in[8] =
-		    it87_read_value(data, IT87_REG_VIN(8));
+		data->in[8] = it87_read_value(data, IT87_REG_VIN(8));
 
 		for (i = 0; i < 5; i++) {
 			/* Skip disabled fans */
@@ -1519,7 +1947,7 @@ static struct it87_data *it87_update_device(struct device *dev)
 				continue;
 
 			data->fan_min[i] =
-			    it87_read_value(data, IT87_REG_FAN_MIN[i]);
+				it87_read_value(data, IT87_REG_FAN_MIN[i]);
 			data->fan[i] = it87_read_value(data,
 				       IT87_REG_FAN[i]);
 			/* Add high byte if in 16-bit mode */
@@ -1532,11 +1960,11 @@ static struct it87_data *it87_update_device(struct device *dev)
 		}
 		for (i = 0; i < 3; i++) {
 			data->temp[i] =
-			    it87_read_value(data, IT87_REG_TEMP(i));
+				it87_read_value(data, IT87_REG_TEMP(i));
 			data->temp_high[i] =
-			    it87_read_value(data, IT87_REG_TEMP_HIGH(i));
+				it87_read_value(data, IT87_REG_TEMP_HIGH(i));
 			data->temp_low[i] =
-			    it87_read_value(data, IT87_REG_TEMP_LOW(i));
+				it87_read_value(data, IT87_REG_TEMP_LOW(i));
 		}
 
 		/* Newer chips don't have clock dividers */
@@ -1551,9 +1979,13 @@ static struct it87_data *it87_update_device(struct device *dev)
 			it87_read_value(data, IT87_REG_ALARM1) |
 			(it87_read_value(data, IT87_REG_ALARM2) << 8) |
 			(it87_read_value(data, IT87_REG_ALARM3) << 16);
+		data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+
 		data->fan_main_ctrl = it87_read_value(data,
 				IT87_REG_FAN_MAIN_CTRL);
 		data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
+		for (i = 0; i < 3; i++)
+			it87_update_pwm_ctrl(data, i);
 
 		data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
 		/* The 8705 does not have VID capability.
@@ -1628,7 +2060,7 @@ exit:
 static int __init sm_it87_init(void)
 {
 	int err;
-	unsigned short isa_address=0;
+	unsigned short isa_address = 0;
 	struct it87_sio_data sio_data;
 
 	memset(&sio_data, 0, sizeof(struct it87_sio_data));
@@ -1640,7 +2072,7 @@ static int __init sm_it87_init(void)
 		return err;
 
 	err = it87_device_add(isa_address, &sio_data);
-	if (err){
+	if (err) {
 		platform_driver_unregister(&it87_driver);
 		return err;
 	}
@@ -1661,7 +2093,8 @@ MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8720F/8726F, SiS950 driver");
 module_param(update_vbat, bool, 0);
 MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
 module_param(fix_pwm_polarity, bool, 0);
-MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)");
+MODULE_PARM_DESC(fix_pwm_polarity,
+		 "Force PWM polarity to active high (DANGEROUS)");
 MODULE_LICENSE("GPL");
 
 module_init(sm_it87_init);
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 7c9bdc16742..7cc2708871a 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1,7 +1,7 @@
 /*
  * lm90.c - Part of lm_sensors, Linux kernel modules for hardware
  *          monitoring
- * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2010  Jean Delvare <khali@linux-fr.org>
  *
  * Based on the lm83 driver. The LM90 is a sensor chip made by National
  * Semiconductor. It reports up to two temperatures (its own plus up to
@@ -93,7 +93,8 @@
 static const unsigned short normal_i2c[] = {
 	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 
-enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646 };
+enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646,
+	w83l771 };
 
 /*
  * The LM90 registers
@@ -151,6 +152,7 @@ static int lm90_detect(struct i2c_client *client, struct i2c_board_info *info);
 static int lm90_probe(struct i2c_client *client,
 		      const struct i2c_device_id *id);
 static void lm90_init_client(struct i2c_client *client);
+static void lm90_alert(struct i2c_client *client, unsigned int flag);
 static int lm90_remove(struct i2c_client *client);
 static struct lm90_data *lm90_update_device(struct device *dev);
 
@@ -173,6 +175,7 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "max6659", max6657 },
 	{ "max6680", max6680 },
 	{ "max6681", max6680 },
+	{ "w83l771", w83l771 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm90_id);
@@ -184,6 +187,7 @@ static struct i2c_driver lm90_driver = {
 	},
 	.probe		= lm90_probe,
 	.remove		= lm90_remove,
+	.alert		= lm90_alert,
 	.id_table	= lm90_id,
 	.detect		= lm90_detect,
 	.address_list	= normal_i2c,
@@ -201,6 +205,9 @@ struct lm90_data {
 	int kind;
 	int flags;
 
+	u8 config_orig;		/* Original configuration register value */
+	u8 alert_alarms;	/* Which alarm bits trigger ALERT# */
+
 	/* registers values */
 	s8 temp8[4];	/* 0: local low limit
 			   1: local high limit
@@ -758,6 +765,14 @@ static int lm90_detect(struct i2c_client *new_client,
 		 && reg_convrate <= 0x07) {
 			name = "max6646";
 		}
+	} else
+	if (address == 0x4C
+	 && man_id == 0x5C) { /* Winbond/Nuvoton */
+		if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
+		 && (reg_config1 & 0x2A) == 0x00
+		 && reg_convrate <= 0x08) {
+			name = "w83l771";
+		}
 	}
 
 	if (!name) { /* identification failed */
@@ -794,6 +809,19 @@ static int lm90_probe(struct i2c_client *new_client,
 			new_client->flags &= ~I2C_CLIENT_PEC;
 	}
 
+	/* Different devices have different alarm bits triggering the
+	 * ALERT# output */
+	switch (data->kind) {
+	case lm90:
+	case lm99:
+	case lm86:
+		data->alert_alarms = 0x7b;
+		break;
+	default:
+		data->alert_alarms = 0x7c;
+		break;
+	}
+
 	/* Initialize the LM90 chip */
 	lm90_init_client(new_client);
 
@@ -830,7 +858,7 @@ exit:
 
 static void lm90_init_client(struct i2c_client *client)
 {
-	u8 config, config_orig;
+	u8 config;
 	struct lm90_data *data = i2c_get_clientdata(client);
 
 	/*
@@ -842,7 +870,7 @@ static void lm90_init_client(struct i2c_client *client)
 		dev_warn(&client->dev, "Initialization failed!\n");
 		return;
 	}
-	config_orig = config;
+	data->config_orig = config;
 
 	/* Check Temperature Range Select */
 	if (data->kind == adt7461) {
@@ -860,7 +888,7 @@ static void lm90_init_client(struct i2c_client *client)
 	}
 
 	config &= 0xBF;	/* run */
-	if (config != config_orig) /* Only write if changed */
+	if (config != data->config_orig) /* Only write if changed */
 		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
 }
 
@@ -875,10 +903,46 @@ static int lm90_remove(struct i2c_client *client)
 		device_remove_file(&client->dev,
 				   &sensor_dev_attr_temp2_offset.dev_attr);
 
+	/* Restore initial configuration */
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+				  data->config_orig);
+
 	kfree(data);
 	return 0;
 }
 
+static void lm90_alert(struct i2c_client *client, unsigned int flag)
+{
+	struct lm90_data *data = i2c_get_clientdata(client);
+	u8 config, alarms;
+
+	lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
+	if ((alarms & 0x7f) == 0) {
+		dev_info(&client->dev, "Everything OK\n");
+	} else {
+		if (alarms & 0x61)
+			dev_warn(&client->dev,
+				 "temp%d out of range, please check!\n", 1);
+		if (alarms & 0x1a)
+			dev_warn(&client->dev,
+				 "temp%d out of range, please check!\n", 2);
+		if (alarms & 0x04)
+			dev_warn(&client->dev,
+				 "temp%d diode open, please check!\n", 2);
+
+		/* Disable ALERT# output, because these chips don't implement
+		  SMBus alert correctly; they should only hold the alert line
+		  low briefly. */
+		if ((data->kind == adm1032 || data->kind == adt7461)
+		 && (alarms & data->alert_alarms)) {
+			dev_dbg(&client->dev, "Disabling ALERT#\n");
+			lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+			i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+						  config | 0x80);
+		}
+	}
+}
+
 static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
 {
 	int err;
@@ -966,6 +1030,21 @@ static struct lm90_data *lm90_update_device(struct device *dev)
 		}
 		lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
 
+		/* Re-enable ALERT# output if it was originally enabled and
+		 * relevant alarms are all clear */
+		if ((data->config_orig & 0x80) == 0
+		 && (data->alarms & data->alert_alarms) == 0) {
+			u8 config;
+
+			lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+			if (config & 0x80) {
+				dev_dbg(&client->dev, "Re-enabling ALERT#\n");
+				i2c_smbus_write_byte_data(client,
+							  LM90_REG_W_CONFIG1,
+							  config & ~0x80);
+			}
+		}
+
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index a13b30e8d8d..d14a1af9f55 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -134,7 +134,7 @@ struct tmp401_data {
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
-	int kind;
+	enum chips kind;
 
 	/* register values */
 	u8 status;
@@ -524,7 +524,7 @@ static int tmp401_detect(struct i2c_client *client,
 	if (reg > 15)
 		return -ENODEV;
 
-	strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE);
+	strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
 
 	return 0;
 }
@@ -572,8 +572,7 @@ static int tmp401_probe(struct i2c_client *client,
 		goto exit_remove;
 	}
 
-	dev_info(&client->dev, "Detected TI %s chip\n",
-		 names[data->kind - 1]);
+	dev_info(&client->dev, "Detected TI %s chip\n", names[data->kind]);
 
 	return 0;
 
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 4f7c051e2d7..738c472ece2 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -61,9 +61,9 @@ static const u8 TMP421_TEMP_LSB[4]		= { 0x10, 0x11, 0x12, 0x13 };
 #define TMP423_DEVICE_ID			0x23
 
 static const struct i2c_device_id tmp421_id[] = {
-	{ "tmp421", tmp421 },
-	{ "tmp422", tmp422 },
-	{ "tmp423", tmp423 },
+	{ "tmp421", 2 },
+	{ "tmp422", 3 },
+	{ "tmp423", 4 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tmp421_id);
@@ -73,21 +73,23 @@ struct tmp421_data {
 	struct mutex update_lock;
 	char valid;
 	unsigned long last_updated;
-	int kind;
+	int channels;
 	u8 config;
 	s16 temp[4];
 };
 
 static int temp_from_s16(s16 reg)
 {
-	int temp = reg;
+	/* Mask out status bits */
+	int temp = reg & ~0xf;
 
 	return (temp * 1000 + 128) / 256;
 }
 
 static int temp_from_u16(u16 reg)
 {
-	int temp = reg;
+	/* Mask out status bits */
+	int temp = reg & ~0xf;
 
 	/* Add offset for extended temperature range. */
 	temp -= 64 * 256;
@@ -107,7 +109,7 @@ static struct tmp421_data *tmp421_update_device(struct device *dev)
 		data->config = i2c_smbus_read_byte_data(client,
 			TMP421_CONFIG_REG_1);
 
-		for (i = 0; i <= data->kind; i++) {
+		for (i = 0; i < data->channels; i++) {
 			data->temp[i] = i2c_smbus_read_byte_data(client,
 				TMP421_TEMP_MSB[i]) << 8;
 			data->temp[i] |= i2c_smbus_read_byte_data(client,
@@ -166,7 +168,7 @@ static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
 	devattr = container_of(a, struct device_attribute, attr);
 	index = to_sensor_dev_attr(devattr)->index;
 
-	if (data->kind > index)
+	if (index < data->channels)
 		return a->mode;
 
 	return 0;
@@ -252,9 +254,9 @@ static int tmp421_detect(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE);
+	strlcpy(info->type, tmp421_id[kind].name, I2C_NAME_SIZE);
 	dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n",
-		 names[kind - 1], client->addr);
+		 names[kind], client->addr);
 
 	return 0;
 }
@@ -271,7 +273,7 @@ static int tmp421_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
-	data->kind = id->driver_data;
+	data->channels = id->driver_data;
 
 	err = tmp421_init_client(client);
 	if (err)
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 9a2022b6749..9de81a4c15a 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -3,6 +3,10 @@
     Copyright (C) 2006 Winbond Electronics Corp.
                   Yuan Mu
                   Rudolf Marek <r.marek@assembler.cz>
+    Copyright (C) 2009-2010 Sven Anders <anders@anduras.de>, ANDURAS AG.
+		  Watchdog driver part
+		  (Based partially on fschmd driver,
+		   Copyright 2007-2008 by Hans de Goede)
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -35,6 +39,16 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/watchdog.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <linux/kref.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+
+/* Default values */
+#define WATCHDOG_TIMEOUT 2	/* 2 minute default timeout */
 
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
@@ -51,6 +65,18 @@ static int reset;
 module_param(reset, bool, 0);
 MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
 
+static int timeout = WATCHDOG_TIMEOUT;	/* default timeout in minutes */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in minutes. 2<= timeout <=255 (default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
 /*
    Address 0x00, 0x0d, 0x0e, 0x0f in all three banks are reserved
    as ID, Bank Select registers
@@ -72,6 +98,11 @@ MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
 #define W83793_REG_VID_LATCHB		0x08
 #define W83793_REG_VID_CTRL		0x59
 
+#define W83793_REG_WDT_LOCK		0x01
+#define W83793_REG_WDT_ENABLE		0x02
+#define W83793_REG_WDT_STATUS		0x03
+#define W83793_REG_WDT_TIMEOUT		0x04
+
 static u16 W83793_REG_TEMP_MODE[2] = { 0x5e, 0x5f };
 
 #define TEMP_READ	0
@@ -223,8 +254,37 @@ struct w83793_data {
 	u8 tolerance[3];	/* Temp tolerance(Smart Fan I/II) */
 	u8 sf2_pwm[6][7];	/* Smart FanII: Fan duty cycle */
 	u8 sf2_temp[6][7];	/* Smart FanII: Temp level point */
+
+	/* watchdog */
+	struct i2c_client *client;
+	struct mutex watchdog_lock;
+	struct list_head list; /* member of the watchdog_data_list */
+	struct kref kref;
+	struct miscdevice watchdog_miscdev;
+	unsigned long watchdog_is_open;
+	char watchdog_expect_close;
+	char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
+	unsigned int watchdog_caused_reboot;
+	int watchdog_timeout; /* watchdog timeout in minutes */
 };
 
+/* Somewhat ugly :( global data pointer list with all devices, so that
+   we can find our device data as when using misc_register. There is no
+   other method to get to one's device data from the open file-op and
+   for usage in the reboot notifier callback. */
+static LIST_HEAD(watchdog_data_list);
+
+/* Note this lock not only protect list access, but also data.kref access */
+static DEFINE_MUTEX(watchdog_data_mutex);
+
+/* Release our data struct when we're detached from the i2c client *and* all
+   references to our watchdog device are released */
+static void w83793_release_resources(struct kref *ref)
+{
+	struct w83793_data *data = container_of(ref, struct w83793_data, kref);
+	kfree(data);
+}
+
 static u8 w83793_read_value(struct i2c_client *client, u16 reg);
 static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value);
 static int w83793_probe(struct i2c_client *client,
@@ -1063,14 +1123,349 @@ static void w83793_init_client(struct i2c_client *client)
 	/* Start monitoring */
 	w83793_write_value(client, W83793_REG_CONFIG,
 			   w83793_read_value(client, W83793_REG_CONFIG) | 0x01);
+}
+
+/*
+ * Watchdog routines
+ */
+
+static int watchdog_set_timeout(struct w83793_data *data, int timeout)
+{
+	int ret, mtimeout;
+
+	mtimeout = DIV_ROUND_UP(timeout, 60);
+
+	if (mtimeout > 255)
+		return -EINVAL;
+
+	mutex_lock(&data->watchdog_lock);
+	if (!data->client) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	data->watchdog_timeout = mtimeout;
+
+	/* Set Timeout value (in Minutes) */
+	w83793_write_value(data->client, W83793_REG_WDT_TIMEOUT,
+			   data->watchdog_timeout);
+
+	ret = mtimeout * 60;
+
+leave:
+	mutex_unlock(&data->watchdog_lock);
+	return ret;
+}
+
+static int watchdog_get_timeout(struct w83793_data *data)
+{
+	int timeout;
+
+	mutex_lock(&data->watchdog_lock);
+	timeout = data->watchdog_timeout * 60;
+	mutex_unlock(&data->watchdog_lock);
+
+	return timeout;
+}
+
+static int watchdog_trigger(struct w83793_data *data)
+{
+	int ret = 0;
+
+	mutex_lock(&data->watchdog_lock);
+	if (!data->client) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	/* Set Timeout value (in Minutes) */
+	w83793_write_value(data->client, W83793_REG_WDT_TIMEOUT,
+			   data->watchdog_timeout);
+
+leave:
+	mutex_unlock(&data->watchdog_lock);
+	return ret;
+}
+
+static int watchdog_enable(struct w83793_data *data)
+{
+	int ret = 0;
+
+	mutex_lock(&data->watchdog_lock);
+	if (!data->client) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	/* Set initial timeout */
+	w83793_write_value(data->client, W83793_REG_WDT_TIMEOUT,
+			   data->watchdog_timeout);
+
+	/* Enable Soft Watchdog */
+	w83793_write_value(data->client, W83793_REG_WDT_LOCK, 0x55);
+
+leave:
+	mutex_unlock(&data->watchdog_lock);
+	return ret;
+}
+
+static int watchdog_disable(struct w83793_data *data)
+{
+	int ret = 0;
+
+	mutex_lock(&data->watchdog_lock);
+	if (!data->client) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	/* Disable Soft Watchdog */
+	w83793_write_value(data->client, W83793_REG_WDT_LOCK, 0xAA);
+
+leave:
+	mutex_unlock(&data->watchdog_lock);
+	return ret;
+}
+
+static int watchdog_open(struct inode *inode, struct file *filp)
+{
+	struct w83793_data *pos, *data = NULL;
+	int watchdog_is_open;
+
+	/* We get called from drivers/char/misc.c with misc_mtx hold, and we
+	   call misc_register() from  w83793_probe() with watchdog_data_mutex
+	   hold, as misc_register() takes the misc_mtx lock, this is a possible
+	   deadlock, so we use mutex_trylock here. */
+	if (!mutex_trylock(&watchdog_data_mutex))
+		return -ERESTARTSYS;
+	list_for_each_entry(pos, &watchdog_data_list, list) {
+		if (pos->watchdog_miscdev.minor == iminor(inode)) {
+			data = pos;
+			break;
+		}
+	}
+
+	/* Check, if device is already open */
+	watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
+
+	/* Increase data reference counter (if not already done).
+	   Note we can never not have found data, so we don't check for this */
+	if (!watchdog_is_open)
+		kref_get(&data->kref);
+
+	mutex_unlock(&watchdog_data_mutex);
+
+	/* Check, if device is already open and possibly issue error */
+	if (watchdog_is_open)
+		return -EBUSY;
+
+	/* Enable Soft Watchdog */
+	watchdog_enable(data);
+
+	/* Store pointer to data into filp's private data */
+	filp->private_data = data;
+
+	return nonseekable_open(inode, filp);
+}
+
+static int watchdog_close(struct inode *inode, struct file *filp)
+{
+	struct w83793_data *data = filp->private_data;
 
+	if (data->watchdog_expect_close) {
+		watchdog_disable(data);
+		data->watchdog_expect_close = 0;
+	} else {
+		watchdog_trigger(data);
+		dev_crit(&data->client->dev,
+			"unexpected close, not stopping watchdog!\n");
+	}
+
+	clear_bit(0, &data->watchdog_is_open);
+
+	/* Decrease data reference counter */
+	mutex_lock(&watchdog_data_mutex);
+	kref_put(&data->kref, w83793_release_resources);
+	mutex_unlock(&watchdog_data_mutex);
+
+	return 0;
+}
+
+static ssize_t watchdog_write(struct file *filp, const char __user *buf,
+	size_t count, loff_t *offset)
+{
+	size_t ret;
+	struct w83793_data *data = filp->private_data;
+
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* Clear it in case it was set with a previous write */
+			data->watchdog_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					data->watchdog_expect_close = 1;
+			}
+		}
+		ret = watchdog_trigger(data);
+		if (ret < 0)
+			return ret;
+	}
+	return count;
+}
+
+static int watchdog_ioctl(struct inode *inode, struct file *filp,
+			  unsigned int cmd, unsigned long arg)
+{
+	static struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING |
+			   WDIOF_SETTIMEOUT |
+			   WDIOF_CARDRESET,
+		.identity = "w83793 watchdog"
+	};
+
+	int val, ret = 0;
+	struct w83793_data *data = filp->private_data;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (!nowayout)
+			ident.options |= WDIOF_MAGICCLOSE;
+		if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
+			ret = -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+		val = data->watchdog_caused_reboot ? WDIOF_CARDRESET : 0;
+		ret = put_user(val, (int __user *)arg);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, (int __user *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		ret = watchdog_trigger(data);
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		val = watchdog_get_timeout(data);
+		ret = put_user(val, (int __user *)arg);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(val, (int __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+		ret = watchdog_set_timeout(data, val);
+		if (ret > 0)
+			ret = put_user(ret, (int __user *)arg);
+		break;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(val, (int __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+
+		if (val & WDIOS_DISABLECARD)
+			ret = watchdog_disable(data);
+		else if (val & WDIOS_ENABLECARD)
+			ret = watchdog_enable(data);
+		else
+			ret = -EINVAL;
+
+		break;
+	default:
+		ret = -ENOTTY;
+	}
+
+	return ret;
+}
+
+static const struct file_operations watchdog_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.open = watchdog_open,
+	.release = watchdog_close,
+	.write = watchdog_write,
+	.ioctl = watchdog_ioctl,
+};
+
+/*
+ *	Notifier for system down
+ */
+
+static int watchdog_notify_sys(struct notifier_block *this, unsigned long code,
+			       void *unused)
+{
+	struct w83793_data *data = NULL;
+
+	if (code == SYS_DOWN || code == SYS_HALT) {
+
+		/* Disable each registered watchdog */
+		mutex_lock(&watchdog_data_mutex);
+		list_for_each_entry(data, &watchdog_data_list, list) {
+			if (data->watchdog_miscdev.minor)
+				watchdog_disable(data);
+		}
+		mutex_unlock(&watchdog_data_mutex);
+	}
+
+	return NOTIFY_DONE;
 }
 
+/*
+ *	The WDT needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block watchdog_notifier = {
+	.notifier_call = watchdog_notify_sys,
+};
+
+/*
+ * Init / remove routines
+ */
+
 static int w83793_remove(struct i2c_client *client)
 {
 	struct w83793_data *data = i2c_get_clientdata(client);
 	struct device *dev = &client->dev;
-	int i;
+	int i, tmp;
+
+	/* Unregister the watchdog (if registered) */
+	if (data->watchdog_miscdev.minor) {
+		misc_deregister(&data->watchdog_miscdev);
+
+		if (data->watchdog_is_open) {
+			dev_warn(&client->dev,
+				"i2c client detached with watchdog open! "
+				"Stopping watchdog.\n");
+			watchdog_disable(data);
+		}
+
+		mutex_lock(&watchdog_data_mutex);
+		list_del(&data->list);
+		mutex_unlock(&watchdog_data_mutex);
+
+		/* Tell the watchdog code the client is gone */
+		mutex_lock(&data->watchdog_lock);
+		data->client = NULL;
+		mutex_unlock(&data->watchdog_lock);
+	}
+
+	/* Reset Configuration Register to Disable Watch Dog Registers */
+	tmp = w83793_read_value(client, W83793_REG_CONFIG);
+	w83793_write_value(client, W83793_REG_CONFIG, tmp & ~0x04);
+
+	unregister_reboot_notifier(&watchdog_notifier);
 
 	hwmon_device_unregister(data->hwmon_dev);
 
@@ -1099,7 +1494,10 @@ static int w83793_remove(struct i2c_client *client)
 	if (data->lm75[1] != NULL)
 		i2c_unregister_device(data->lm75[1]);
 
-	kfree(data);
+	/* Decrease data reference counter */
+	mutex_lock(&watchdog_data_mutex);
+	kref_put(&data->kref, w83793_release_resources);
+	mutex_unlock(&watchdog_data_mutex);
 
 	return 0;
 }
@@ -1203,6 +1601,7 @@ static int w83793_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
+	const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 };
 	struct w83793_data *data;
 	int i, tmp, val, err;
 	int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
@@ -1218,6 +1617,14 @@ static int w83793_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, data);
 	data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
 	mutex_init(&data->update_lock);
+	mutex_init(&data->watchdog_lock);
+	INIT_LIST_HEAD(&data->list);
+	kref_init(&data->kref);
+
+	/* Store client pointer in our data struct for watchdog usage
+	   (where the client is found through a data ptr instead of the
+	   otherway around) */
+	data->client = client;
 
 	err = w83793_detect_subclients(client);
 	if (err)
@@ -1380,8 +1787,77 @@ static int w83793_probe(struct i2c_client *client,
 		goto exit_remove;
 	}
 
+	/* Watchdog initialization */
+
+	/* Register boot notifier */
+	err = register_reboot_notifier(&watchdog_notifier);
+	if (err != 0) {
+		dev_err(&client->dev,
+			"cannot register reboot notifier (err=%d)\n", err);
+		goto exit_devunreg;
+	}
+
+	/* Enable Watchdog registers.
+	   Set Configuration Register to Enable Watch Dog Registers
+	   (Bit 2) = XXXX, X1XX. */
+	tmp = w83793_read_value(client, W83793_REG_CONFIG);
+	w83793_write_value(client, W83793_REG_CONFIG, tmp | 0x04);
+
+	/* Set the default watchdog timeout */
+	data->watchdog_timeout = timeout;
+
+	/* Check, if last reboot was caused by watchdog */
+	data->watchdog_caused_reboot =
+	  w83793_read_value(data->client, W83793_REG_WDT_STATUS) & 0x01;
+
+	/* Disable Soft Watchdog during initialiation */
+	watchdog_disable(data);
+
+	/* We take the data_mutex lock early so that watchdog_open() cannot
+	   run when misc_register() has completed, but we've not yet added
+	   our data to the watchdog_data_list (and set the default timeout) */
+	mutex_lock(&watchdog_data_mutex);
+	for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) {
+		/* Register our watchdog part */
+		snprintf(data->watchdog_name, sizeof(data->watchdog_name),
+			"watchdog%c", (i == 0) ? '\0' : ('0' + i));
+		data->watchdog_miscdev.name = data->watchdog_name;
+		data->watchdog_miscdev.fops = &watchdog_fops;
+		data->watchdog_miscdev.minor = watchdog_minors[i];
+
+		err = misc_register(&data->watchdog_miscdev);
+		if (err == -EBUSY)
+			continue;
+		if (err) {
+			data->watchdog_miscdev.minor = 0;
+			dev_err(&client->dev,
+				"Registering watchdog chardev: %d\n", err);
+			break;
+		}
+
+		list_add(&data->list, &watchdog_data_list);
+
+		dev_info(&client->dev,
+			"Registered watchdog chardev major 10, minor: %d\n",
+			watchdog_minors[i]);
+		break;
+	}
+	if (i == ARRAY_SIZE(watchdog_minors)) {
+		data->watchdog_miscdev.minor = 0;
+		dev_warn(&client->dev, "Couldn't register watchdog chardev "
+			"(due to no free minor)\n");
+	}
+
+	mutex_unlock(&watchdog_data_mutex);
+
 	return 0;
 
+	/* Unregister hwmon device */
+
+exit_devunreg:
+
+	hwmon_device_unregister(data->hwmon_dev);
+
 	/* Unregister sysfs hooks */
 
 exit_remove:
@@ -1628,7 +2104,7 @@ static void __exit sensors_w83793_exit(void)
 	i2c_del_driver(&w83793_driver);
 }
 
-MODULE_AUTHOR("Yuan Mu");
+MODULE_AUTHOR("Yuan Mu, Sven Anders");
 MODULE_DESCRIPTION("w83793 driver");
 MODULE_LICENSE("GPL");