Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

4 files changed, 65 insertions, 69 deletions

diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 0f28d91f29d..f085c18d290 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -195,6 +195,9 @@ static unsigned int applesmc_accelerometer;
 /* Indicates whether this computer has light sensors and keyboard backlight. */
 static unsigned int applesmc_light;
 
+/* The number of fans handled by the driver */
+static unsigned int fans_handled;
+
 /* Indicates which temperature sensors set to use. */
 static unsigned int applesmc_temperature_set;
 
@@ -1492,39 +1495,24 @@ static int __init applesmc_init(void)
 
 	/* create fan files */
 	count = applesmc_get_fan_count();
-	if (count < 0) {
+	if (count < 0)
 		printk(KERN_ERR "applesmc: Cannot get the number of fans.\n");
-	} else {
+	else
 		printk(KERN_INFO "applesmc: %d fans found.\n", count);
 
-		switch (count) {
-		default:
-			printk(KERN_WARNING "applesmc: More than 4 fans found,"
-					" but at most 4 fans are supported"
-						" by the driver.\n");
-		case 4:
-			ret = sysfs_create_group(&pdev->dev.kobj,
-						 &fan_attribute_groups[3]);
-			if (ret)
-				goto out_key_enumeration;
-		case 3:
-			ret = sysfs_create_group(&pdev->dev.kobj,
-						 &fan_attribute_groups[2]);
-			if (ret)
-				goto out_key_enumeration;
-		case 2:
-			ret = sysfs_create_group(&pdev->dev.kobj,
-						 &fan_attribute_groups[1]);
-			if (ret)
-				goto out_key_enumeration;
-		case 1:
-			ret = sysfs_create_group(&pdev->dev.kobj,
-						 &fan_attribute_groups[0]);
-			if (ret)
-				goto out_fan_1;
-		case 0:
-			;
-		}
+	if (count > 4) {
+		count = 4;
+		printk(KERN_WARNING "applesmc: More than 4 fans found,"
+		       " but at most 4 fans are supported"
+		       " by the driver.\n");
+	}
+
+	while (fans_handled < count) {
+		ret = sysfs_create_group(&pdev->dev.kobj,
+					 &fan_attribute_groups[fans_handled]);
+		if (ret)
+			goto out_fans;
+		fans_handled++;
 	}
 
 	for (i = 0;
@@ -1593,10 +1581,10 @@ out_accelerometer:
 		applesmc_release_accelerometer();
 out_temperature:
 	sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
-	sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[0]);
-out_fan_1:
-	sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[1]);
-out_key_enumeration:
+out_fans:
+	while (fans_handled)
+		sysfs_remove_group(&pdev->dev.kobj,
+				   &fan_attribute_groups[--fans_handled]);
 	sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group);
 out_name:
 	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr);
@@ -1622,8 +1610,9 @@ static void __exit applesmc_exit(void)
 	if (applesmc_accelerometer)
 		applesmc_release_accelerometer();
 	sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
-	sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[0]);
-	sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[1]);
+	while (fans_handled)
+		sysfs_remove_group(&pdev->dev.kobj,
+				   &fan_attribute_groups[--fans_handled]);
 	sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group);
 	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr);
 	platform_device_unregister(pdev);
diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c
index 7f948105d8a..0f388adc618 100644
--- a/drivers/hwmon/asc7621.c
+++ b/drivers/hwmon/asc7621.c
@@ -268,8 +268,11 @@ static ssize_t store_fan16(struct device *dev,
 	if (strict_strtol(buf, 10, &reqval))
 		return -EINVAL;
 
+	/* If a minimum RPM of zero is requested, then we set the register to
+	   0xffff. This value allows the fan to be stopped completely without
+	   generating an alarm. */
 	reqval =
-	    (SENSORS_LIMIT((reqval) <= 0 ? 0 : 5400000 / (reqval), 0, 65534));
+	    (reqval <= 0 ? 0xffff : SENSORS_LIMIT(5400000 / reqval, 0, 0xfffe));
 
 	mutex_lock(&data->update_lock);
 	data->reg[param->msb[0]] = (reqval >> 8) & 0xff;
@@ -285,8 +288,9 @@ static ssize_t store_fan16(struct device *dev,
  * Voltages are scaled in the device so that the nominal voltage
  * is 3/4ths of the 0-255 range (i.e. 192).
  * If all voltages are 'normal' then all voltage registers will
- * read 0xC0.  This doesn't help us if we don't have a point of refernce.
- * The data sheet however provides us with the full scale value for each
+ * read 0xC0.
+ *
+ * The data sheet provides us with the 3/4 scale value for each voltage
  * which is stored in in_scaling.  The sda->index parameter value provides
  * the index into in_scaling.
  *
@@ -295,7 +299,7 @@ static ssize_t store_fan16(struct device *dev,
  */
 
 static int asc7621_in_scaling[] = {
-	3320, 3000, 4380, 6640, 16000
+	2500, 2250, 3300, 5000, 12000
 };
 
 static ssize_t show_in10(struct device *dev, struct device_attribute *attr,
@@ -306,19 +310,12 @@ static ssize_t show_in10(struct device *dev, struct device_attribute *attr,
 	u8 nr = sda->index;
 
 	mutex_lock(&data->update_lock);
-	regval = (data->reg[param->msb[0]] * asc7621_in_scaling[nr]) / 256;
-
-	/* The LSB value is a 2-bit scaling of the MSB's LSbit value.
-	 * I.E.  If the maximim voltage for this input is 6640 millivolts then
-	 * a MSB register value of 0 = 0mv and 255 = 6640mv.
-	 * A 1 step change therefore represents 25.9mv (6640 / 256).
-	 * The extra 2-bits therefore represent increments of 6.48mv.
-	 */
-	regval += ((asc7621_in_scaling[nr] / 256) / 4) *
-	    (data->reg[param->lsb[0]] >> 6);
-
+	regval = (data->reg[param->msb[0]] << 8) | (data->reg[param->lsb[0]]);
 	mutex_unlock(&data->update_lock);
 
+	/* The LSB value is a 2-bit scaling of the MSB's LSbit value. */
+	regval = (regval >> 6) * asc7621_in_scaling[nr] / (0xc0 << 2);
+
 	return sprintf(buf, "%u\n", regval);
 }
 
@@ -331,7 +328,7 @@ static ssize_t show_in8(struct device *dev, struct device_attribute *attr,
 
 	return sprintf(buf, "%u\n",
 		       ((data->reg[param->msb[0]] *
-			 asc7621_in_scaling[nr]) / 256));
+			 asc7621_in_scaling[nr]) / 0xc0));
 }
 
 static ssize_t store_in8(struct device *dev, struct device_attribute *attr,
@@ -344,9 +341,11 @@ static ssize_t store_in8(struct device *dev, struct device_attribute *attr,
 	if (strict_strtol(buf, 10, &reqval))
 		return -EINVAL;
 
-	reqval = SENSORS_LIMIT(reqval, 0, asc7621_in_scaling[nr]);
+	reqval = SENSORS_LIMIT(reqval, 0, 0xffff);
+
+	reqval = reqval * 0xc0 / asc7621_in_scaling[nr];
 
-	reqval = (reqval * 255 + 128) / asc7621_in_scaling[nr];
+	reqval = SENSORS_LIMIT(reqval, 0, 0xff);
 
 	mutex_lock(&data->update_lock);
 	data->reg[param->msb[0]] = reqval;
@@ -846,11 +845,11 @@ static struct asc7621_param asc7621_params[] = {
 	PWRITE(in3_max, 3, PRI_LOW, 0x4b, 0, 0, 0, in8),
 	PWRITE(in4_max, 4, PRI_LOW, 0x4d, 0, 0, 0, in8),
 
-	PREAD(in0_alarm, 0, PRI_LOW, 0x41, 0, 0x01, 0, bitmask),
-	PREAD(in1_alarm, 1, PRI_LOW, 0x41, 0, 0x01, 1, bitmask),
-	PREAD(in2_alarm, 2, PRI_LOW, 0x41, 0, 0x01, 2, bitmask),
-	PREAD(in3_alarm, 3, PRI_LOW, 0x41, 0, 0x01, 3, bitmask),
-	PREAD(in4_alarm, 4, PRI_LOW, 0x42, 0, 0x01, 0, bitmask),
+	PREAD(in0_alarm, 0, PRI_HIGH, 0x41, 0, 0x01, 0, bitmask),
+	PREAD(in1_alarm, 1, PRI_HIGH, 0x41, 0, 0x01, 1, bitmask),
+	PREAD(in2_alarm, 2, PRI_HIGH, 0x41, 0, 0x01, 2, bitmask),
+	PREAD(in3_alarm, 3, PRI_HIGH, 0x41, 0, 0x01, 3, bitmask),
+	PREAD(in4_alarm, 4, PRI_HIGH, 0x42, 0, 0x01, 0, bitmask),
 
 	PREAD(fan1_input, 0, PRI_HIGH, 0x29, 0x28, 0, 0, fan16),
 	PREAD(fan2_input, 1, PRI_HIGH, 0x2b, 0x2a, 0, 0, fan16),
@@ -862,10 +861,10 @@ static struct asc7621_param asc7621_params[] = {
 	PWRITE(fan3_min, 2, PRI_LOW, 0x59, 0x58, 0, 0, fan16),
 	PWRITE(fan4_min, 3, PRI_LOW, 0x5b, 0x5a, 0, 0, fan16),
 
-	PREAD(fan1_alarm, 0, PRI_LOW, 0x42, 0, 0x01, 0, bitmask),
-	PREAD(fan2_alarm, 1, PRI_LOW, 0x42, 0, 0x01, 1, bitmask),
-	PREAD(fan3_alarm, 2, PRI_LOW, 0x42, 0, 0x01, 2, bitmask),
-	PREAD(fan4_alarm, 3, PRI_LOW, 0x42, 0, 0x01, 3, bitmask),
+	PREAD(fan1_alarm, 0, PRI_HIGH, 0x42, 0, 0x01, 2, bitmask),
+	PREAD(fan2_alarm, 1, PRI_HIGH, 0x42, 0, 0x01, 3, bitmask),
+	PREAD(fan3_alarm, 2, PRI_HIGH, 0x42, 0, 0x01, 4, bitmask),
+	PREAD(fan4_alarm, 3, PRI_HIGH, 0x42, 0, 0x01, 5, bitmask),
 
 	PREAD(temp1_input, 0, PRI_HIGH, 0x25, 0x10, 0, 0, temp10),
 	PREAD(temp2_input, 1, PRI_HIGH, 0x26, 0x15, 0, 0, temp10),
@@ -886,10 +885,10 @@ static struct asc7621_param asc7621_params[] = {
 	PWRITE(temp3_max, 2, PRI_LOW, 0x53, 0, 0, 0, temp8),
 	PWRITE(temp4_max, 3, PRI_LOW, 0x35, 0, 0, 0, temp8),
 
-	PREAD(temp1_alarm, 0, PRI_LOW, 0x41, 0, 0x01, 4, bitmask),
-	PREAD(temp2_alarm, 1, PRI_LOW, 0x41, 0, 0x01, 5, bitmask),
-	PREAD(temp3_alarm, 2, PRI_LOW, 0x41, 0, 0x01, 6, bitmask),
-	PREAD(temp4_alarm, 3, PRI_LOW, 0x43, 0, 0x01, 0, bitmask),
+	PREAD(temp1_alarm, 0, PRI_HIGH, 0x41, 0, 0x01, 4, bitmask),
+	PREAD(temp2_alarm, 1, PRI_HIGH, 0x41, 0, 0x01, 5, bitmask),
+	PREAD(temp3_alarm, 2, PRI_HIGH, 0x41, 0, 0x01, 6, bitmask),
+	PREAD(temp4_alarm, 3, PRI_HIGH, 0x43, 0, 0x01, 0, bitmask),
 
 	PWRITE(temp1_source, 0, PRI_LOW, 0x02, 0, 0x07, 4, bitmask),
 	PWRITE(temp2_source, 1, PRI_LOW, 0x02, 0, 0x07, 0, bitmask),
@@ -898,7 +897,7 @@ static struct asc7621_param asc7621_params[] = {
 
 	PWRITE(temp1_smoothing_enable, 0, PRI_LOW, 0x62, 0, 0x01, 3, bitmask),
 	PWRITE(temp2_smoothing_enable, 1, PRI_LOW, 0x63, 0, 0x01, 7, bitmask),
-	PWRITE(temp3_smoothing_enable, 2, PRI_LOW, 0x64, 0, 0x01, 3, bitmask),
+	PWRITE(temp3_smoothing_enable, 2, PRI_LOW, 0x63, 0, 0x01, 3, bitmask),
 	PWRITE(temp4_smoothing_enable, 3, PRI_LOW, 0x3c, 0, 0x01, 3, bitmask),
 
 	PWRITE(temp1_smoothing_time, 0, PRI_LOW, 0x62, 0, 0x07, 0, temp_st),
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 75f3fa55663..16c42024072 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -1169,15 +1169,19 @@ static int atk_create_files(struct atk_data *data)
 	int err;
 
 	list_for_each_entry(s, &data->sensor_list, list) {
+		sysfs_attr_init(&s->input_attr.attr);
 		err = device_create_file(data->hwmon_dev, &s->input_attr);
 		if (err)
 			return err;
+		sysfs_attr_init(&s->label_attr.attr);
 		err = device_create_file(data->hwmon_dev, &s->label_attr);
 		if (err)
 			return err;
+		sysfs_attr_init(&s->limit1_attr.attr);
 		err = device_create_file(data->hwmon_dev, &s->limit1_attr);
 		if (err)
 			return err;
+		sysfs_attr_init(&s->limit2_attr.attr);
 		err = device_create_file(data->hwmon_dev, &s->limit2_attr);
 		if (err)
 			return err;
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index be475e844c2..7580f55e67e 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -217,6 +217,10 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted),
 	AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted),
 	AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
+	AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left),
+	AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
+	AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
+	AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
 	{ NULL, }
 /* Laptop models without axis info (yet):
  * "NC6910" "HP Compaq 6910"
@@ -324,8 +328,8 @@ static int lis3lv02d_remove(struct acpi_device *device, int type)
 	lis3lv02d_joystick_disable();
 	lis3lv02d_poweroff(&lis3_dev);
 
-	flush_work(&hpled_led.work);
 	led_classdev_unregister(&hpled_led.led_classdev);
+	flush_work(&hpled_led.work);
 
 	return lis3lv02d_remove_fs(&lis3_dev);
 }