Merge branch 'perf/urgent' into perf/core

Merge reason: Upcoming patch is dependent on a fix in perf/urgent.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

18 files changed, 276 insertions, 1558 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index ed7711d11ae..6857560144b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -325,34 +325,6 @@ config SENSORS_F75375S
 	  This driver can also be built as a module.  If so, the module
 	  will be called f75375s.
 
-config SENSORS_FSCHER
-	tristate "FSC Hermes (DEPRECATED)"
-	depends on X86 && I2C
-	help
-	  This driver is DEPRECATED please use the new merged fschmd
-	  ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
-	  instead.
-
-	  If you say yes here you get support for Fujitsu Siemens
-	  Computers Hermes sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called fscher.
-
-config SENSORS_FSCPOS
-	tristate "FSC Poseidon (DEPRECATED)"
-	depends on X86 && I2C
-	help
-	  This driver is DEPRECATED please use the new merged fschmd
-	  ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
-	  instead.
-
-	  If you say yes here you get support for Fujitsu Siemens
-	  Computers Poseidon sensor chips.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called fscpos.
-
 config SENSORS_FSCHMD
 	tristate "Fujitsu Siemens Computers sensor chips"
 	depends on X86 && I2C
@@ -401,12 +373,12 @@ config SENSORS_GL520SM
 	  will be called gl520sm.
 
 config SENSORS_CORETEMP
-	tristate "Intel Core (2) Duo/Solo temperature sensor"
+	tristate "Intel Core/Core2/Atom temperature sensor"
 	depends on X86 && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the temperature
-	  sensor inside your CPU. Supported all are all known variants
-	  of Intel Core family.
+	  sensor inside your CPU. Most of the family 6 CPUs
+	  are supported. Check documentation/driver for details.
 
 config SENSORS_IBMAEM
 	tristate "IBM Active Energy Manager temperature/power sensors and control"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index bcf73a9bb61..9f46cb019cc 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -42,9 +42,7 @@ obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
 obj-$(CONFIG_SENSORS_F71882FG)	+= f71882fg.o
 obj-$(CONFIG_SENSORS_F75375S)	+= f75375s.o
-obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
 obj-$(CONFIG_SENSORS_FSCHMD)	+= fschmd.o
-obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
 obj-$(CONFIG_SENSORS_G760A)	+= g760a.o
 obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
 obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c
index 242294db3db..5e9e095f113 100644
--- a/drivers/hwmon/adcxx.c
+++ b/drivers/hwmon/adcxx.c
@@ -43,6 +43,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/mutex.h>
+#include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
 
 #define DRVNAME		"adcxx"
@@ -157,8 +158,9 @@ static struct sensor_device_attribute ad_input[] = {
 
 /*----------------------------------------------------------------------*/
 
-static int __devinit adcxx_probe(struct spi_device *spi, int channels)
+static int __devinit adcxx_probe(struct spi_device *spi)
 {
+	int channels = spi_get_device_id(spi)->driver_data;
 	struct adcxx *adc;
 	int status;
 	int i;
@@ -204,26 +206,6 @@ out_err:
 	return status;
 }
 
-static int __devinit adcxx1s_probe(struct spi_device *spi)
-{
-	return adcxx_probe(spi, 1);
-}
-
-static int __devinit adcxx2s_probe(struct spi_device *spi)
-{
-	return adcxx_probe(spi, 2);
-}
-
-static int __devinit adcxx4s_probe(struct spi_device *spi)
-{
-	return adcxx_probe(spi, 4);
-}
-
-static int __devinit adcxx8s_probe(struct spi_device *spi)
-{
-	return adcxx_probe(spi, 8);
-}
-
 static int __devexit adcxx_remove(struct spi_device *spi)
 {
 	struct adcxx *adc = dev_get_drvdata(&spi->dev);
@@ -241,79 +223,33 @@ static int __devexit adcxx_remove(struct spi_device *spi)
 	return 0;
 }
 
-static struct spi_driver adcxx1s_driver = {
-	.driver = {
-		.name	= "adcxx1s",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= adcxx1s_probe,
-	.remove	= __devexit_p(adcxx_remove),
+static const struct spi_device_id adcxx_ids[] = {
+	{ "adcxx1s", 1 },
+	{ "adcxx2s", 2 },
+	{ "adcxx4s", 4 },
+	{ "adcxx8s", 8 },
+	{ },
 };
+MODULE_DEVICE_TABLE(spi, adcxx_ids);
 
-static struct spi_driver adcxx2s_driver = {
+static struct spi_driver adcxx_driver = {
 	.driver = {
-		.name	= "adcxx2s",
+		.name	= "adcxx",
 		.owner	= THIS_MODULE,
 	},
-	.probe	= adcxx2s_probe,
-	.remove	= __devexit_p(adcxx_remove),
-};
-
-static struct spi_driver adcxx4s_driver = {
-	.driver = {
-		.name	= "adcxx4s",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= adcxx4s_probe,
-	.remove	= __devexit_p(adcxx_remove),
-};
-
-static struct spi_driver adcxx8s_driver = {
-	.driver = {
-		.name	= "adcxx8s",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= adcxx8s_probe,
+	.id_table = adcxx_ids,
+	.probe	= adcxx_probe,
 	.remove	= __devexit_p(adcxx_remove),
 };
 
 static int __init init_adcxx(void)
 {
-	int status;
-	status = spi_register_driver(&adcxx1s_driver);
-	if (status)
-		goto reg_1_failed;
-
-	status = spi_register_driver(&adcxx2s_driver);
-	if (status)
-		goto reg_2_failed;
-
-	status = spi_register_driver(&adcxx4s_driver);
-	if (status)
-		goto reg_4_failed;
-
-	status = spi_register_driver(&adcxx8s_driver);
-	if (status)
-		goto reg_8_failed;
-
-	return status;
-
-reg_8_failed:
-	spi_unregister_driver(&adcxx4s_driver);
-reg_4_failed:
-	spi_unregister_driver(&adcxx2s_driver);
-reg_2_failed:
-	spi_unregister_driver(&adcxx1s_driver);
-reg_1_failed:
-	return status;
+	return spi_register_driver(&adcxx_driver);
 }
 
 static void __exit exit_adcxx(void)
 {
-	spi_unregister_driver(&adcxx1s_driver);
-	spi_unregister_driver(&adcxx2s_driver);
-	spi_unregister_driver(&adcxx4s_driver);
-	spi_unregister_driver(&adcxx8s_driver);
+	spi_unregister_driver(&adcxx_driver);
 }
 
 module_init(init_adcxx);
@@ -322,8 +258,3 @@ module_exit(exit_adcxx);
 MODULE_AUTHOR("Marc Pignat");
 MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver");
 MODULE_LICENSE("GPL");
-
-MODULE_ALIAS("adcxx1s");
-MODULE_ALIAS("adcxx2s");
-MODULE_ALIAS("adcxx4s");
-MODULE_ALIAS("adcxx8s");
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index b11e06f644b..afc59431812 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -83,16 +83,14 @@ struct adm1021_data {
 
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
+	char low_power;		/* !=0 if device in low power mode */
 	unsigned long last_updated;	/* In jiffies */
 
-	s8 temp_max[2];		/* Register values */
-	s8 temp_min[2];
-	s8 temp[2];
+	int temp_max[2];		/* Register values */
+	int temp_min[2];
+	int temp[2];
 	u8 alarms;
 	/* Special values for ADM1023 only */
-	u8 remote_temp_prec;
-	u8 remote_temp_os_prec;
-	u8 remote_temp_hyst_prec;
 	u8 remote_temp_offset;
 	u8 remote_temp_offset_prec;
 };
@@ -141,7 +139,7 @@ static ssize_t show_temp(struct device *dev,
 	int index = to_sensor_dev_attr(devattr)->index;
 	struct adm1021_data *data = adm1021_update_device(dev);
 
-	return sprintf(buf, "%d\n", 1000 * data->temp[index]);
+	return sprintf(buf, "%d\n", data->temp[index]);
 }
 
 static ssize_t show_temp_max(struct device *dev,
@@ -150,7 +148,7 @@ static ssize_t show_temp_max(struct device *dev,
 	int index = to_sensor_dev_attr(devattr)->index;
 	struct adm1021_data *data = adm1021_update_device(dev);
 
-	return sprintf(buf, "%d\n", 1000 * data->temp_max[index]);
+	return sprintf(buf, "%d\n", data->temp_max[index]);
 }
 
 static ssize_t show_temp_min(struct device *dev,
@@ -159,7 +157,7 @@ static ssize_t show_temp_min(struct device *dev,
 	int index = to_sensor_dev_attr(devattr)->index;
 	struct adm1021_data *data = adm1021_update_device(dev);
 
-	return sprintf(buf, "%d\n", 1000 * data->temp_min[index]);
+	return sprintf(buf, "%d\n", data->temp_min[index]);
 }
 
 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
@@ -216,6 +214,35 @@ static ssize_t set_temp_min(struct device *dev,
 	return count;
 }
 
+static ssize_t show_low_power(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	struct adm1021_data *data = adm1021_update_device(dev);
+	return sprintf(buf, "%d\n", data->low_power);
+}
+
+static ssize_t set_low_power(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1021_data *data = i2c_get_clientdata(client);
+	int low_power = simple_strtol(buf, NULL, 10) != 0;
+
+	mutex_lock(&data->update_lock);
+	if (low_power != data->low_power) {
+		int config = i2c_smbus_read_byte_data(
+			client, ADM1021_REG_CONFIG_R);
+		data->low_power = low_power;
+		i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
+			(config & 0xBF) | (low_power << 6));
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
 			  set_temp_max, 0);
@@ -233,6 +260,7 @@ static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
 
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static DEVICE_ATTR(low_power, S_IWUSR | S_IRUGO, show_low_power, set_low_power);
 
 static struct attribute *adm1021_attributes[] = {
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -247,6 +275,7 @@ static struct attribute *adm1021_attributes[] = {
 	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
 	&dev_attr_alarms.attr,
+	&dev_attr_low_power.attr,
 	NULL
 };
 
@@ -412,25 +441,27 @@ static struct adm1021_data *adm1021_update_device(struct device *dev)
 		dev_dbg(&client->dev, "Starting adm1021 update\n");
 
 		for (i = 0; i < 2; i++) {
-			data->temp[i] = i2c_smbus_read_byte_data(client,
-						ADM1021_REG_TEMP(i));
-			data->temp_max[i] = i2c_smbus_read_byte_data(client,
-						ADM1021_REG_TOS_R(i));
-			data->temp_min[i] = i2c_smbus_read_byte_data(client,
-						ADM1021_REG_THYST_R(i));
+			data->temp[i] = 1000 *
+				(s8) i2c_smbus_read_byte_data(
+					client, ADM1021_REG_TEMP(i));
+			data->temp_max[i] = 1000 *
+				(s8) i2c_smbus_read_byte_data(
+					client, ADM1021_REG_TOS_R(i));
+			data->temp_min[i] = 1000 *
+				(s8) i2c_smbus_read_byte_data(
+					client, ADM1021_REG_THYST_R(i));
 		}
 		data->alarms = i2c_smbus_read_byte_data(client,
 						ADM1021_REG_STATUS) & 0x7c;
 		if (data->type == adm1023) {
-			data->remote_temp_prec =
-				i2c_smbus_read_byte_data(client,
-						ADM1023_REG_REM_TEMP_PREC);
-			data->remote_temp_os_prec =
-				i2c_smbus_read_byte_data(client,
-						ADM1023_REG_REM_TOS_PREC);
-			data->remote_temp_hyst_prec =
-				i2c_smbus_read_byte_data(client,
-						ADM1023_REG_REM_THYST_PREC);
+			/* The ADM1023 provides 3 extra bits of precision for
+			 * the remote sensor in extra registers. */
+			data->temp[1] += 125 * (i2c_smbus_read_byte_data(
+				client, ADM1023_REG_REM_TEMP_PREC) >> 5);
+			data->temp_max[1] += 125 * (i2c_smbus_read_byte_data(
+				client, ADM1023_REG_REM_TOS_PREC) >> 5);
+			data->temp_min[1] += 125 * (i2c_smbus_read_byte_data(
+				client, ADM1023_REG_REM_THYST_PREC) >> 5);
 			data->remote_temp_offset =
 				i2c_smbus_read_byte_data(client,
 						ADM1023_REG_REM_OFFSET);
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 789441830cd..56905955352 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -37,6 +37,7 @@
 #define ADM1031_REG_PWM			(0x22)
 #define ADM1031_REG_FAN_MIN(nr)		(0x10 + (nr))
 
+#define ADM1031_REG_TEMP_OFFSET(nr)	(0x0d + (nr))
 #define ADM1031_REG_TEMP_MAX(nr)	(0x14 + 4 * (nr))
 #define ADM1031_REG_TEMP_MIN(nr)	(0x15 + 4 * (nr))
 #define ADM1031_REG_TEMP_CRIT(nr)	(0x16 + 4 * (nr))
@@ -93,6 +94,7 @@ struct adm1031_data {
 	u8 auto_temp_min[3];
 	u8 auto_temp_off[3];
 	u8 auto_temp_max[3];
+	s8 temp_offset[3];
 	s8 temp_min[3];
 	s8 temp_max[3];
 	s8 temp_crit[3];
@@ -145,6 +147,10 @@ adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value)
 
 #define TEMP_FROM_REG_EXT(val, ext)	(TEMP_FROM_REG(val) + (ext) * 125)
 
+#define TEMP_OFFSET_TO_REG(val)		(TEMP_TO_REG(val) & 0x8f)
+#define TEMP_OFFSET_FROM_REG(val)	TEMP_FROM_REG((val) < 0 ? \
+						      (val) | 0x70 : (val))
+
 #define FAN_FROM_REG(reg, div)		((reg) ? (11250 * 60) / ((reg) * (div)) : 0)
 
 static int FAN_TO_REG(int reg, int div)
@@ -585,6 +591,14 @@ static ssize_t show_temp(struct device *dev,
 	    (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
 	return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
 }
+static ssize_t show_temp_offset(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       TEMP_OFFSET_FROM_REG(data->temp_offset[nr]));
+}
 static ssize_t show_temp_min(struct device *dev,
 			     struct device_attribute *attr, char *buf)
 {
@@ -606,6 +620,24 @@ static ssize_t show_temp_crit(struct device *dev,
 	struct adm1031_data *data = adm1031_update_device(dev);
 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
 }
+static ssize_t set_temp_offset(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int nr = to_sensor_dev_attr(attr)->index;
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -15000, 15000);
+	mutex_lock(&data->update_lock);
+	data->temp_offset[nr] = TEMP_OFFSET_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_OFFSET(nr),
+			    data->temp_offset[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
@@ -661,6 +693,8 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr,
 #define temp_reg(offset)						\
 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,		\
 		show_temp, NULL, offset - 1);				\
+static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR,	\
+		show_temp_offset, set_temp_offset, offset - 1);		\
 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,	\
 		show_temp_min, set_temp_min, offset - 1);		\
 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,	\
@@ -714,6 +748,7 @@ static struct attribute *adm1031_attributes[] = {
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_auto_fan1_channel.dev_attr.attr,
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,
 	&sensor_dev_attr_temp1_min.dev_attr.attr,
 	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -721,6 +756,7 @@ static struct attribute *adm1031_attributes[] = {
 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
 	&sensor_dev_attr_temp2_min.dev_attr.attr,
 	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -757,6 +793,7 @@ static struct attribute *adm1031_attributes_opt[] = {
 	&sensor_dev_attr_pwm2.dev_attr.attr,
 	&sensor_dev_attr_auto_fan2_channel.dev_attr.attr,
 	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_offset.dev_attr.attr,
 	&sensor_dev_attr_temp3_min.dev_attr.attr,
 	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp3_max.dev_attr.attr,
@@ -937,6 +974,9 @@ static struct adm1031_data *adm1031_update_device(struct device *dev)
 			}
 			data->temp[chan] = newh;
 
+			data->temp_offset[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_OFFSET(chan));
 			data->temp_min[chan] =
 			    adm1031_read_value(client,
 					       ADM1031_REG_TEMP_MIN(chan));
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 753b34885f9..7ea6a8f6605 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -178,6 +178,8 @@ static const int debug;
 static struct platform_device *pdev;
 static s16 rest_x;
 static s16 rest_y;
+static u8 backlight_state[2];
+
 static struct device *hwmon_dev;
 static struct input_polled_dev *applesmc_idev;
 
@@ -497,17 +499,36 @@ static int applesmc_probe(struct platform_device *dev)
 	return 0;
 }
 
-static int applesmc_resume(struct platform_device *dev)
+/* Synchronize device with memorized backlight state */
+static int applesmc_pm_resume(struct device *dev)
 {
-	return applesmc_device_init();
+	mutex_lock(&applesmc_lock);
+	if (applesmc_light)
+		applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2);
+	mutex_unlock(&applesmc_lock);
+	return 0;
 }
 
+/* Reinitialize device on resume from hibernation */
+static int applesmc_pm_restore(struct device *dev)
+{
+	int ret = applesmc_device_init();
+	if (ret)
+		return ret;
+	return applesmc_pm_resume(dev);
+}
+
+static struct dev_pm_ops applesmc_pm_ops = {
+	.resume = applesmc_pm_resume,
+	.restore = applesmc_pm_restore,
+};
+
 static struct platform_driver applesmc_driver = {
 	.probe = applesmc_probe,
-	.resume = applesmc_resume,
 	.driver	= {
 		.name = "applesmc",
 		.owner = THIS_MODULE,
+		.pm = &applesmc_pm_ops,
 	},
 };
 
@@ -804,17 +825,10 @@ static ssize_t applesmc_calibrate_store(struct device *dev,
 	return count;
 }
 
-/* Store the next backlight value to be written by the work */
-static unsigned int backlight_value;
-
 static void applesmc_backlight_set(struct work_struct *work)
 {
-	u8 buffer[2];
-
 	mutex_lock(&applesmc_lock);
-	buffer[0] = backlight_value;
-	buffer[1] = 0x00;
-	applesmc_write_key(BACKLIGHT_KEY, buffer, 2);
+	applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2);
 	mutex_unlock(&applesmc_lock);
 }
 static DECLARE_WORK(backlight_work, &applesmc_backlight_set);
@@ -824,7 +838,7 @@ static void applesmc_brightness_set(struct led_classdev *led_cdev,
 {
 	int ret;
 
-	backlight_value = value;
+	backlight_state[0] = value;
 	ret = queue_work(applesmc_led_wq, &backlight_work);
 
 	if (debug && (!ret))
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 93c17223b52..caef39cda8c 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -157,17 +157,26 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *
 	/* The 100C is default for both mobile and non mobile CPUs */
 
 	int tjmax = 100000;
-	int ismobile = 1;
+	int tjmax_ee = 85000;
+	int usemsr_ee = 1;
 	int err;
 	u32 eax, edx;
 
 	/* Early chips have no MSR for TjMax */
 
 	if ((c->x86_model == 0xf) && (c->x86_mask < 4)) {
-		ismobile = 0;
+		usemsr_ee = 0;
 	}
 
-	if ((c->x86_model > 0xe) && (ismobile)) {
+	/* Atoms seems to have TjMax at 90C */
+
+	if (c->x86_model == 0x1c) {
+		usemsr_ee = 0;
+		tjmax = 90000;
+	}
+
+	if ((c->x86_model > 0xe) && (usemsr_ee)) {
+		u8 platform_id;
 
 		/* Now we can detect the mobile CPU using Intel provided table
 		   http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
@@ -179,13 +188,29 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *
 			dev_warn(dev,
 				 "Unable to access MSR 0x17, assuming desktop"
 				 " CPU\n");
-			ismobile = 0;
-		} else if (!(eax & 0x10000000)) {
-			ismobile = 0;
+			usemsr_ee = 0;
+		} else if (c->x86_model < 0x17 && !(eax & 0x10000000)) {
+			/* Trust bit 28 up to Penryn, I could not find any
+			   documentation on that; if you happen to know
+			   someone at Intel please ask */
+			usemsr_ee = 0;
+		} else {
+			/* Platform ID bits 52:50 (EDX starts at bit 32) */
+			platform_id = (edx >> 18) & 0x7;
+
+			/* Mobile Penryn CPU seems to be platform ID 7 or 5
+			  (guesswork) */
+			if ((c->x86_model == 0x17) &&
+			    ((platform_id == 5) || (platform_id == 7))) {
+				/* If MSR EE bit is set, set it to 90 degrees C,
+				   otherwise 105 degrees C */
+				tjmax_ee = 90000;
+				tjmax = 105000;
+			}
 		}
 	}
 
-	if (ismobile) {
+	if (usemsr_ee) {
 
 		err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx);
 		if (err) {
@@ -193,9 +218,11 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *
 				 "Unable to access MSR 0xEE, for Tjmax, left"
 				 " at default");
 		} else if (eax & 0x40000000) {
-			tjmax = 85000;
+			tjmax = tjmax_ee;
 		}
-	} else {
+	/* if we dont use msr EE it means we are desktop CPU (with exeception
+	   of Atom) */
+	} else if (tjmax == 100000) {
 		dev_warn(dev, "Using relative temperature scale!\n");
 	}
 
@@ -248,9 +275,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, data);
 
 	/* read the still undocumented IA32_TEMPERATURE_TARGET it exists
-	   on older CPUs but not in this register */
+	   on older CPUs but not in this register, Atoms don't have it either */
 
-	if (c->x86_model > 0xe) {
+	if ((c->x86_model > 0xe) && (c->x86_model != 0x1c)) {
 		err = rdmsr_safe_on_cpu(data->id, 0x1a2, &eax, &edx);
 		if (err) {
 			dev_warn(&pdev->dev, "Unable to read"
@@ -413,11 +440,15 @@ static int __init coretemp_init(void)
 	for_each_online_cpu(i) {
 		struct cpuinfo_x86 *c = &cpu_data(i);
 
-		/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
+		/* check if family 6, models 0xe (Pentium M DC),
+		  0xf (Core 2 DC 65nm), 0x16 (Core 2 SC 65nm),
+		  0x17 (Penryn 45nm), 0x1a (Nehalem), 0x1c (Atom),
+		  0x1e (Lynnfield) */
 		if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
 		    !((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
 			(c->x86_model == 0x16) || (c->x86_model == 0x17) ||
-			(c->x86_model == 0x1A))) {
+			(c->x86_model == 0x1a) || (c->x86_model == 0x1c) ||
+			(c->x86_model == 0x1e))) {
 
 			/* supported CPU not found, but report the unknown
 			   family 6 CPU */
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 9814d51b3af..2c2cb1ec94c 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -1134,7 +1134,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 		res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]);
 		break;
 	case SYS_PWM_ENABLE:
-		if (ix > 3) {
+		if (ix >= 3) {
 			res = 1; /* pwm[5-6] hard-wired to manual mode */
 		} else {
 			res = PWM_EN_FROM_REG(data->pwm_config[ix]);
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
deleted file mode 100644
index 12c70e402cb..00000000000
--- a/drivers/hwmon/fscher.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * fscher.c - Part of lm_sensors, Linux kernel modules for hardware
- * monitoring
- * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* 
- *  fujitsu siemens hermes chip, 
- *  module based on fscpos.c 
- *  Copyright (C) 2000 Hermann Jung <hej@odn.de>
- *  Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- *  and Philip Edelbrock <phil@netroedge.com>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/hwmon.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-
-/*
- * Addresses to scan
- */
-
-static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-
-/*
- * Insmod parameters
- */
-
-I2C_CLIENT_INSMOD_1(fscher);
-
-/*
- * The FSCHER registers
- */
-
-/* chip identification */
-#define FSCHER_REG_IDENT_0		0x00
-#define FSCHER_REG_IDENT_1		0x01
-#define FSCHER_REG_IDENT_2		0x02
-#define FSCHER_REG_REVISION		0x03
-
-/* global control and status */
-#define FSCHER_REG_EVENT_STATE		0x04
-#define FSCHER_REG_CONTROL		0x05
-
-/* watchdog */
-#define FSCHER_REG_WDOG_PRESET		0x28
-#define FSCHER_REG_WDOG_STATE		0x23
-#define FSCHER_REG_WDOG_CONTROL		0x21
-
-/* fan 0 */
-#define FSCHER_REG_FAN0_MIN		0x55
-#define FSCHER_REG_FAN0_ACT		0x0e
-#define FSCHER_REG_FAN0_STATE		0x0d
-#define FSCHER_REG_FAN0_RIPPLE		0x0f
-
-/* fan 1 */
-#define FSCHER_REG_FAN1_MIN		0x65
-#define FSCHER_REG_FAN1_ACT		0x6b
-#define FSCHER_REG_FAN1_STATE		0x62
-#define FSCHER_REG_FAN1_RIPPLE		0x6f
-
-/* fan 2 */
-#define FSCHER_REG_FAN2_MIN		0xb5
-#define FSCHER_REG_FAN2_ACT		0xbb
-#define FSCHER_REG_FAN2_STATE		0xb2
-#define FSCHER_REG_FAN2_RIPPLE		0xbf
-
-/* voltage supervision */
-#define FSCHER_REG_VOLT_12		0x45
-#define FSCHER_REG_VOLT_5		0x42
-#define FSCHER_REG_VOLT_BATT		0x48
-
-/* temperature 0 */
-#define FSCHER_REG_TEMP0_ACT		0x64
-#define FSCHER_REG_TEMP0_STATE		0x71
-
-/* temperature 1 */
-#define FSCHER_REG_TEMP1_ACT		0x32
-#define FSCHER_REG_TEMP1_STATE		0x81
-
-/* temperature 2 */
-#define FSCHER_REG_TEMP2_ACT		0x35
-#define FSCHER_REG_TEMP2_STATE		0x91
-
-/*
- * Functions declaration
- */
-
-static int fscher_probe(struct i2c_client *client,
-			const struct i2c_device_id *id);
-static int fscher_detect(struct i2c_client *client, int kind,
-			 struct i2c_board_info *info);
-static int fscher_remove(struct i2c_client *client);
-static struct fscher_data *fscher_update_device(struct device *dev);
-static void fscher_init_client(struct i2c_client *client);
-
-static int fscher_read_value(struct i2c_client *client, u8 reg);
-static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value);
-
-/*
- * Driver data (common to all clients)
- */
- 
-static const struct i2c_device_id fscher_id[] = {
-	{ "fscher", fscher },
-	{ }
-};
-
-static struct i2c_driver fscher_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "fscher",
-	},
-	.probe		= fscher_probe,
-	.remove		= fscher_remove,
-	.id_table	= fscher_id,
-	.detect		= fscher_detect,
-	.address_data	= &addr_data,
-};
-
-/*
- * Client data (each client gets its own)
- */
-
-struct fscher_data {
-	struct device *hwmon_dev;
-	struct mutex update_lock;
-	char valid; /* zero until following fields are valid */
-	unsigned long last_updated; /* in jiffies */
-
-	/* register values */
-	u8 revision;		/* revision of chip */
-	u8 global_event;	/* global event status */
-	u8 global_control;	/* global control register */
-	u8 watchdog[3];		/* watchdog */
-	u8 volt[3];		/* 12, 5, battery voltage */ 
-	u8 temp_act[3];		/* temperature */
-	u8 temp_status[3];	/* status of sensor */
-	u8 fan_act[3];		/* fans revolutions per second */
-	u8 fan_status[3];	/* fan status */
-	u8 fan_min[3];		/* fan min value for rps */
-	u8 fan_ripple[3];	/* divider for rps */
-};
-
-/*
- * Sysfs stuff
- */
-
-#define sysfs_r(kind, sub, offset, reg) \
-static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \
-static ssize_t show_##kind##offset##sub (struct device *, struct device_attribute *attr, char *); \
-static ssize_t show_##kind##offset##sub (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct fscher_data *data = fscher_update_device(dev); \
-	return show_##kind##sub(data, buf, (offset)); \
-}
-
-#define sysfs_w(kind, sub, offset, reg) \
-static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \
-static ssize_t set_##kind##offset##sub (struct device *, struct device_attribute *attr, const char *, size_t); \
-static ssize_t set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct fscher_data *data = i2c_get_clientdata(client); \
-	return set_##kind##sub(client, data, buf, count, (offset), reg); \
-}
-
-#define sysfs_rw_n(kind, sub, offset, reg) \
-sysfs_r(kind, sub, offset, reg) \
-sysfs_w(kind, sub, offset, reg) \
-static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub);
-
-#define sysfs_rw(kind, sub, reg) \
-sysfs_r(kind, sub, 0, reg) \
-sysfs_w(kind, sub, 0, reg) \
-static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub);
-
-#define sysfs_ro_n(kind, sub, offset, reg) \
-sysfs_r(kind, sub, offset, reg) \
-static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL);
-
-#define sysfs_ro(kind, sub, reg) \
-sysfs_r(kind, sub, 0, reg) \
-static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL);
-
-#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \
-sysfs_rw_n(pwm,        , offset, reg_min) \
-sysfs_rw_n(fan, _status, offset, reg_status) \
-sysfs_rw_n(fan, _div   , offset, reg_ripple) \
-sysfs_ro_n(fan, _input , offset, reg_act)
-
-#define sysfs_temp(offset, reg_status, reg_act) \
-sysfs_rw_n(temp, _status, offset, reg_status) \
-sysfs_ro_n(temp, _input , offset, reg_act)
-    
-#define sysfs_in(offset, reg_act) \
-sysfs_ro_n(in, _input, offset, reg_act)
-
-#define sysfs_revision(reg_revision) \
-sysfs_ro(revision, , reg_revision)
-
-#define sysfs_alarms(reg_events) \
-sysfs_ro(alarms, , reg_events)
-
-#define sysfs_control(reg_control) \
-sysfs_rw(control, , reg_control)
-
-#define sysfs_watchdog(reg_control, reg_status, reg_preset) \
-sysfs_rw(watchdog, _control, reg_control) \
-sysfs_rw(watchdog, _status , reg_status) \
-sysfs_rw(watchdog, _preset , reg_preset)
-
-sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN,
-	     FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT)
-sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN,
-	     FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT)
-sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN,
-	     FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT)
-
-sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT)
-sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT)
-sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT)
-
-sysfs_in(0, FSCHER_REG_VOLT_12)
-sysfs_in(1, FSCHER_REG_VOLT_5)
-sysfs_in(2, FSCHER_REG_VOLT_BATT)
-
-sysfs_revision(FSCHER_REG_REVISION)
-sysfs_alarms(FSCHER_REG_EVENTS)
-sysfs_control(FSCHER_REG_CONTROL)
-sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET)
-  
-static struct attribute *fscher_attributes[] = {
-	&dev_attr_revision.attr,
-	&dev_attr_alarms.attr,
-	&dev_attr_control.attr,
-
-	&dev_attr_watchdog_status.attr,
-	&dev_attr_watchdog_control.attr,
-	&dev_attr_watchdog_preset.attr,
-
-	&dev_attr_in0_input.attr,
-	&dev_attr_in1_input.attr,
-	&dev_attr_in2_input.attr,
-
-	&dev_attr_fan1_status.attr,
-	&dev_attr_fan1_div.attr,
-	&dev_attr_fan1_input.attr,
-	&dev_attr_pwm1.attr,
-	&dev_attr_fan2_status.attr,
-	&dev_attr_fan2_div.attr,
-	&dev_attr_fan2_input.attr,
-	&dev_attr_pwm2.attr,
-	&dev_attr_fan3_status.attr,
-	&dev_attr_fan3_div.attr,
-	&dev_attr_fan3_input.attr,
-	&dev_attr_pwm3.attr,
-
-	&dev_attr_temp1_status.attr,
-	&dev_attr_temp1_input.attr,
-	&dev_attr_temp2_status.attr,
-	&dev_attr_temp2_input.attr,
-	&dev_attr_temp3_status.attr,
-	&dev_attr_temp3_input.attr,
-	NULL
-};
-
-static const struct attribute_group fscher_group = {
-	.attrs = fscher_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int fscher_detect(struct i2c_client *new_client, int kind,
-			 struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = new_client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	/* Do the remaining detection unless force or force_fscher parameter */
-	if (kind < 0) {
-		if ((i2c_smbus_read_byte_data(new_client,
-		     FSCHER_REG_IDENT_0) != 0x48)	/* 'H' */
-		 || (i2c_smbus_read_byte_data(new_client,
-		     FSCHER_REG_IDENT_1) != 0x45)	/* 'E' */
-		 || (i2c_smbus_read_byte_data(new_client,
-		     FSCHER_REG_IDENT_2) != 0x52))	/* 'R' */
-			return -ENODEV;
-	}
-
-	strlcpy(info->type, "fscher", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int fscher_probe(struct i2c_client *new_client,
-			const struct i2c_device_id *id)
-{
-	struct fscher_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(new_client, data);
-	data->valid = 0;
-	mutex_init(&data->update_lock);
-
-	fscher_init_client(new_client);
-
-	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group)))
-		goto exit_free;
-
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove_files;
-	}
-
-	return 0;
-
-exit_remove_files:
-	sysfs_remove_group(&new_client->dev.kobj, &fscher_group);
-exit_free:
-	kfree(data);
-exit:
-	return err;
-}
-
-static int fscher_remove(struct i2c_client *client)
-{
-	struct fscher_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &fscher_group);
-
-	kfree(data);
-	return 0;
-}
-
-static int fscher_read_value(struct i2c_client *client, u8 reg)
-{
-	dev_dbg(&client->dev, "read reg 0x%02x\n", reg);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
-	dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n",
-		reg, value);
-
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Called when we have found a new FSC Hermes. */
-static void fscher_init_client(struct i2c_client *client)
-{
-	struct fscher_data *data = i2c_get_clientdata(client);
-
-	/* Read revision from chip */
-	data->revision =  fscher_read_value(client, FSCHER_REG_REVISION);
-}
-
-static struct fscher_data *fscher_update_device(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct fscher_data *data = i2c_get_clientdata(client);
-
-	mutex_lock(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
-
-		dev_dbg(&client->dev, "Starting fscher update\n");
-
-		data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT);
-		data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT);
-		data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT);
-		data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE);
-		data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE);
-		data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE);
-
-		data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12);
-		data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5);
-		data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT);
-
-		data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT);
-		data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT);
-		data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT);
-		data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE);
-		data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE);
-		data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE);
-		data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN);
-		data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN);
-		data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN);
-		data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE);
-		data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE);
-		data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE);
-
-		data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET);
-		data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE);
-		data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL);
-
-		data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE);
-		data->global_control = fscher_read_value(client,
-							FSCHER_REG_CONTROL);
-
-		data->last_updated = jiffies;
-		data->valid = 1;                 
-	}
-
-	mutex_unlock(&data->update_lock);
-
-	return data;
-}
-
-
-
-#define FAN_INDEX_FROM_NUM(nr)	((nr) - 1)
-
-static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data,
-			      const char *buf, size_t count, int nr, int reg)
-{
-	/* bits 0..1, 3..7 reserved => mask with 0x04 */  
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04;
-	
-	mutex_lock(&data->update_lock);
-	data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v;
-	fscher_write_value(client, reg, v);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr)
-{
-	/* bits 0..1, 3..7 reserved => mask with 0x04 */  
-	return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04);
-}
-
-static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
-		       const char *buf, size_t count, int nr, int reg)
-{
-	unsigned long v = simple_strtoul(buf, NULL, 10);
-
-	mutex_lock(&data->update_lock);
-	data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v;
-	fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
-}
-
-static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data,
-			   const char *buf, size_t count, int nr, int reg)
-{
-	/* supported values: 2, 4, 8 */
-	unsigned long v = simple_strtoul(buf, NULL, 10);
-
-	switch (v) {
-	case 2: v = 1; break;
-	case 4: v = 2; break;
-	case 8: v = 3; break;
-	default:
-		dev_err(&client->dev, "fan_div value %ld not "
-			 "supported. Choose one of 2, 4 or 8!\n", v);
-		return -EINVAL;
-	}
-
-	mutex_lock(&data->update_lock);
-
-	/* bits 2..7 reserved => mask with 0x03 */
-	data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03;
-	data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v;
-
-	fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr)
-{
-	/* bits 2..7 reserved => mask with 0x03 */  
-	return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03));
-}
-
-#define RPM_FROM_REG(val)	(val*60)
-
-static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)]));
-}
-
-
-
-#define TEMP_INDEX_FROM_NUM(nr)		((nr) - 1)
-
-static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data,
-			       const char *buf, size_t count, int nr, int reg)
-{
-	/* bits 2..7 reserved, 0 read only => mask with 0x02 */  
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
-	mutex_lock(&data->update_lock);
-	data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v;
-	fscher_write_value(client, reg, v);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr)
-{
-	/* bits 2..7 reserved => mask with 0x03 */
-	return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03);
-}
-
-#define TEMP_FROM_REG(val)	(((val) - 128) * 1000)
-
-static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)]));
-}
-
-/*
- * The final conversion is specified in sensors.conf, as it depends on
- * mainboard specific values. We export the registers contents as
- * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much
- * sense per se, but it minimizes the conversions count and keeps the
- * values within a usual range.
- */
-#define VOLT_FROM_REG(val)	((val) * 10)
-
-static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr]));
-}
-
-
-
-static ssize_t show_revision(struct fscher_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%u\n", data->revision);
-}
-
-
-
-static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr)
-{
-	/* bits 2, 5..6 reserved => mask with 0x9b */
-	return sprintf(buf, "%u\n", data->global_event & 0x9b);
-}
-
-
-
-static ssize_t set_control(struct i2c_client *client, struct fscher_data *data,
-			   const char *buf, size_t count, int nr, int reg)
-{
-	/* bits 1..7 reserved => mask with 0x01 */  
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;
-
-	mutex_lock(&data->update_lock);
-	data->global_control = v;
-	fscher_write_value(client, reg, v);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_control(struct fscher_data *data, char *buf, int nr)
-{
-	/* bits 1..7 reserved => mask with 0x01 */
-	return sprintf(buf, "%u\n", data->global_control & 0x01);
-}
-
-
-
-static ssize_t set_watchdog_control(struct i2c_client *client, struct
-				    fscher_data *data, const char *buf, size_t count,
-				    int nr, int reg)
-{
-	/* bits 0..3 reserved => mask with 0xf0 */  
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
-
-	mutex_lock(&data->update_lock);
-	data->watchdog[2] &= ~0xf0;
-	data->watchdog[2] |= v;
-	fscher_write_value(client, reg, data->watchdog[2]);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr)
-{
-	/* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */
-	return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0);
-}
-
-static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data,
-				   const char *buf, size_t count, int nr, int reg)
-{
-	/* bits 0, 2..7 reserved => mask with 0x02 */  
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
-	mutex_lock(&data->update_lock);
-	data->watchdog[1] &= ~v;
-	fscher_write_value(client, reg, v);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr)
-{
-	/* bits 0, 2..7 reserved => mask with 0x02 */
-	return sprintf(buf, "%u\n", data->watchdog[1] & 0x02);
-}
-
-static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data,
-				   const char *buf, size_t count, int nr, int reg)
-{
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
-	
-	mutex_lock(&data->update_lock);
-	data->watchdog[0] = v;
-	fscher_write_value(client, reg, data->watchdog[0]);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%u\n", data->watchdog[0]);
-}
-
-static int __init sensors_fscher_init(void)
-{
-	return i2c_add_driver(&fscher_driver);
-}
-
-static void __exit sensors_fscher_exit(void)
-{
-	i2c_del_driver(&fscher_driver);
-}
-
-MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>");
-MODULE_DESCRIPTION("FSC Hermes driver");
-MODULE_LICENSE("GPL");
-
-module_init(sensors_fscher_init);
-module_exit(sensors_fscher_exit);
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
deleted file mode 100644
index 8a7bcf500b4..00000000000
--- a/drivers/hwmon/fscpos.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
-	fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips
-	Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*
-	fujitsu siemens poseidon chip,
-	module based on the old fscpos module by Hermann Jung <hej@odn.de> and
-	the fscher module by Reinhard Nissl <rnissl@gmx.de>
-
-	original module based on lm80.c
-	Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
-	and Philip Edelbrock <phil@netroedge.com>
-
-	Thanks to Jean Delvare for reviewing my code and suggesting a lot of
-	improvements.
-*/
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/hwmon.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-
-/*
- * Addresses to scan
- */
-static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-
-/*
- * Insmod parameters
- */
-I2C_CLIENT_INSMOD_1(fscpos);
-
-/*
- * The FSCPOS registers
- */
-
-/* chip identification */
-#define FSCPOS_REG_IDENT_0		0x00
-#define FSCPOS_REG_IDENT_1		0x01
-#define FSCPOS_REG_IDENT_2		0x02
-#define FSCPOS_REG_REVISION		0x03
-
-/* global control and status */
-#define FSCPOS_REG_EVENT_STATE		0x04
-#define FSCPOS_REG_CONTROL		0x05
-
-/* watchdog */
-#define FSCPOS_REG_WDOG_PRESET		0x28
-#define FSCPOS_REG_WDOG_STATE		0x23
-#define FSCPOS_REG_WDOG_CONTROL		0x21
-
-/* voltages */
-#define FSCPOS_REG_VOLT_12		0x45
-#define FSCPOS_REG_VOLT_5		0x42
-#define FSCPOS_REG_VOLT_BATT		0x48
-
-/* fans - the chip does not support minimum speed for fan2 */
-static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 };
-static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab };
-static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 };
-static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf };
-
-/* temperatures */
-static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 };
-static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 };
-
-/*
- * Functions declaration
- */
-static int fscpos_probe(struct i2c_client *client,
-			const struct i2c_device_id *id);
-static int fscpos_detect(struct i2c_client *client, int kind,
-			 struct i2c_board_info *info);
-static int fscpos_remove(struct i2c_client *client);
-
-static int fscpos_read_value(struct i2c_client *client, u8 reg);
-static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value);
-static struct fscpos_data *fscpos_update_device(struct device *dev);
-static void fscpos_init_client(struct i2c_client *client);
-
-static void reset_fan_alarm(struct i2c_client *client, int nr);
-
-/*
- * Driver data (common to all clients)
- */
-static const struct i2c_device_id fscpos_id[] = {
-	{ "fscpos", fscpos },
-	{ }
-};
-
-static struct i2c_driver fscpos_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "fscpos",
-	},
-	.probe		= fscpos_probe,
-	.remove		= fscpos_remove,
-	.id_table	= fscpos_id,
-	.detect		= fscpos_detect,
-	.address_data	= &addr_data,
-};
-
-/*
- * Client data (each client gets its own)
- */
-struct fscpos_data {
-	struct device *hwmon_dev;
-	struct mutex update_lock;
-	char valid; 		/* 0 until following fields are valid */
-	unsigned long last_updated;	/* In jiffies */
-
-	/* register values */
-	u8 revision;		/* revision of chip */
-	u8 global_event;	/* global event status */
-	u8 global_control;	/* global control register */
-	u8 wdog_control;	/* watchdog control */
-	u8 wdog_state;		/* watchdog status */
-	u8 wdog_preset;		/* watchdog preset */
-	u8 volt[3];		/* 12, 5, battery current */
-	u8 temp_act[3];		/* temperature */
-	u8 temp_status[3];	/* status of sensor */
-	u8 fan_act[3];		/* fans revolutions per second */
-	u8 fan_status[3];	/* fan status */
-	u8 pwm[2];		/* fan min value for rps */
-	u8 fan_ripple[3];	/* divider for rps */
-};
-
-/* Temperature */
-#define TEMP_FROM_REG(val)	(((val) - 128) * 1000)
-
-static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1]));
-}
-
-static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr)
-{
-	/* bits 2..7 reserved => mask with 0x03 */
-	return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03);
-}
-
-static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "1\n");
-}
-
-static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data
-			*data, const char *buf,	size_t count, int nr, int reg)
-{
-	unsigned long v = simple_strtoul(buf, NULL, 10);
-	if (v != 1) {
-		dev_err(&client->dev, "temp_reset value %ld not supported. "
-					"Use 1 to reset the alarm!\n", v);
-		return -EINVAL;
-	}
-
-	dev_info(&client->dev, "You used the temp_reset feature which has not "
-				"been proplerly tested. Please report your "
-				"experience to the module author.\n");
-
-	/* Supported value: 2 (clears the status) */
-	fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr - 1], 2);
-	return count;
-}
-
-/* Fans */
-#define RPM_FROM_REG(val)	((val) * 60)
-
-static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr)
-{
-	/* bits 0..1, 3..7 reserved => mask with 0x04 */
-	return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04);
-}
-
-static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1]));
-}
-
-static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr)
-{
-	/* bits 2..7 reserved => mask with 0x03 */
-	return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03);
-}
-
-static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data
-			*data, const char *buf,	size_t count, int nr, int reg)
-{
-	/* supported values: 2, 4, 8 */
-	unsigned long v = simple_strtoul(buf, NULL, 10);
-
-	switch (v) {
-		case 2: v = 1; break;
-		case 4: v = 2; break;
-		case 8: v = 3; break;
-	default:
-		dev_err(&client->dev, "fan_ripple value %ld not supported. "
-					"Must be one of 2, 4 or 8!\n", v);
-		return -EINVAL;
-	}
-	
-	mutex_lock(&data->update_lock);
-	/* bits 2..7 reserved => mask with 0x03 */
-	data->fan_ripple[nr - 1] &= ~0x03;
-	data->fan_ripple[nr - 1] |= v;
-	
-	fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr)
-{
-	return sprintf(buf, "%u\n", data->pwm[nr - 1]);
-}
-
-static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data,
-				const char *buf, size_t count, int nr, int reg)
-{
-	unsigned long v = simple_strtoul(buf, NULL, 10);
-
-	/* Range: 0..255 */
-	if (v < 0) v = 0;
-	if (v > 255) v = 255;
-
-	mutex_lock(&data->update_lock);
-	data->pwm[nr - 1] = v;
-	fscpos_write_value(client, reg, data->pwm[nr - 1]);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static void reset_fan_alarm(struct i2c_client *client, int nr)
-{
-	fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4);
-}
-
-/* Volts */
-#define VOLT_FROM_REG(val, mult)	((val) * (mult) / 255)
-
-static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct fscpos_data *data = fscpos_update_device(dev);
-	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200));
-}
-
-static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct fscpos_data *data = fscpos_update_device(dev);
-	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600));
-}
-
-static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct fscpos_data *data = fscpos_update_device(dev);
-	return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300));
-}
-
-/* Watchdog */
-static ssize_t show_wdog_control(struct fscpos_data *data, char *buf)
-{
-	/* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */
-	return sprintf(buf, "%u\n", data->wdog_control & 0xb0);
-}
-
-static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data
-				*data, const char *buf,	size_t count, int reg)
-{
-	/* bits 0..3 reserved => mask with 0xf0 */
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
-
-	mutex_lock(&data->update_lock);
-	data->wdog_control &= ~0xf0;
-	data->wdog_control |= v;
-	fscpos_write_value(client, reg, data->wdog_control);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_wdog_state(struct fscpos_data *data, char *buf)
-{
-	/* bits 0, 2..7 reserved => mask with 0x02 */
-	return sprintf(buf, "%u\n", data->wdog_state & 0x02);
-}
-
-static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data
-				*data, const char *buf, size_t count, int reg)
-{
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
-	/* Valid values: 2 (clear) */
-	if (v != 2) {
-		dev_err(&client->dev, "wdog_state value %ld not supported. "
-					"Must be 2 to clear the state!\n", v);
-		return -EINVAL;
-	}
-
-	mutex_lock(&data->update_lock);
-	data->wdog_state &= ~v;
-	fscpos_write_value(client, reg, v);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf)
-{
-	return sprintf(buf, "%u\n", data->wdog_preset);
-}
-
-static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data
-				*data, const char *buf,	size_t count, int reg)
-{
-	unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
-
-	mutex_lock(&data->update_lock);
-	data->wdog_preset = v;
-	fscpos_write_value(client, reg, data->wdog_preset);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
-/* Event */
-static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	/* bits 5..7 reserved => mask with 0x1f */
-	struct fscpos_data *data = fscpos_update_device(dev);
-	return sprintf(buf, "%u\n", data->global_event & 0x9b);
-}
-
-/*
- * Sysfs stuff
- */
-#define create_getter(kind, sub) \
-	static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \
-	{ \
-		struct fscpos_data *data = fscpos_update_device(dev); \
-		return show_##kind##sub(data, buf); \
-	}
-
-#define create_getter_n(kind, offset, sub) \
-	static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\
-								 	*buf) \
-	{ \
-		struct fscpos_data *data = fscpos_update_device(dev); \
-		return show_##kind##sub(data, buf, offset); \
-	}
-
-#define create_setter(kind, sub, reg) \
-	static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \
-							*buf, size_t count) \
-	{ \
-		struct i2c_client *client = to_i2c_client(dev); \
-		struct fscpos_data *data = i2c_get_clientdata(client); \
-		return set_##kind##sub(client, data, buf, count, reg); \
-	}
-
-#define create_setter_n(kind, offset, sub, reg) \
-	static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \
-					const char *buf, size_t count) \
-	{ \
-		struct i2c_client *client = to_i2c_client(dev); \
-		struct fscpos_data *data = i2c_get_clientdata(client); \
-		return set_##kind##sub(client, data, buf, count, offset, reg);\
-	}
-
-#define create_sysfs_device_ro(kind, sub, offset) \
-	static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \
-					sysfs_show_##kind##offset##sub, NULL);
-
-#define create_sysfs_device_rw(kind, sub, offset) \
-	static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \
-		sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub);
-
-#define sysfs_ro_n(kind, sub, offset) \
-	create_getter_n(kind, offset, sub); \
-	create_sysfs_device_ro(kind, sub, offset);
-
-#define sysfs_rw_n(kind, sub, offset, reg) \
-	create_getter_n(kind, offset, sub); \
-	create_setter_n(kind, offset, sub, reg); \
-	create_sysfs_device_rw(kind, sub, offset);
-
-#define sysfs_rw(kind, sub, reg) \
-	create_getter(kind, sub); \
-	create_setter(kind, sub, reg); \
-	create_sysfs_device_rw(kind, sub,);
-
-#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \
-	sysfs_fan(offset, reg_status, reg_ripple); \
-	sysfs_rw_n(pwm,, offset, reg_min);
-
-#define sysfs_fan(offset, reg_status, reg_ripple) \
-	sysfs_ro_n(fan, _input, offset); \
-	sysfs_ro_n(fan, _status, offset); \
-	sysfs_rw_n(fan, _ripple, offset, reg_ripple);
-
-#define sysfs_temp(offset, reg_status) \
-	sysfs_ro_n(temp, _input, offset); \
-	sysfs_ro_n(temp, _status, offset); \
-	sysfs_rw_n(temp, _reset, offset, reg_status);
-
-#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \
-	sysfs_rw(wdog, _control, reg_wdog_control); \
-	sysfs_rw(wdog, _preset, reg_wdog_preset); \
-	sysfs_rw(wdog, _state, reg_wdog_state);
-
-sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0],
-							FSCPOS_REG_PWM[0]);
-sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1],
-							FSCPOS_REG_PWM[1]);
-sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]);
-
-sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]);
-sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]);
-sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]);
-
-sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE,
-						FSCPOS_REG_WDOG_CONTROL);
-
-static DEVICE_ATTR(event, S_IRUGO, show_event, NULL);
-static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL);
-static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL);
-static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL);
-
-static struct attribute *fscpos_attributes[] = {
-	&dev_attr_event.attr,
-	&dev_attr_in0_input.attr,
-	&dev_attr_in1_input.attr,
-	&dev_attr_in2_input.attr,
-
-	&dev_attr_wdog_control.attr,
-	&dev_attr_wdog_preset.attr,
-	&dev_attr_wdog_state.attr,
-
-	&dev_attr_temp1_input.attr,
-	&dev_attr_temp1_status.attr,
-	&dev_attr_temp1_reset.attr,
-	&dev_attr_temp2_input.attr,
-	&dev_attr_temp2_status.attr,
-	&dev_attr_temp2_reset.attr,
-	&dev_attr_temp3_input.attr,
-	&dev_attr_temp3_status.attr,
-	&dev_attr_temp3_reset.attr,
-
-	&dev_attr_fan1_input.attr,
-	&dev_attr_fan1_status.attr,
-	&dev_attr_fan1_ripple.attr,
-	&dev_attr_pwm1.attr,
-	&dev_attr_fan2_input.attr,
-	&dev_attr_fan2_status.attr,
-	&dev_attr_fan2_ripple.attr,
-	&dev_attr_pwm2.attr,
-	&dev_attr_fan3_input.attr,
-	&dev_attr_fan3_status.attr,
-	&dev_attr_fan3_ripple.attr,
-	NULL
-};
-
-static const struct attribute_group fscpos_group = {
-	.attrs = fscpos_attributes,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int fscpos_detect(struct i2c_client *new_client, int kind,
-			 struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = new_client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	/* Do the remaining detection unless force or force_fscpos parameter */
-	if (kind < 0) {
-		if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0)
-			!= 0x50) /* 'P' */
-		|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1)
-			!= 0x45) /* 'E' */
-		|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
-			!= 0x47))/* 'G' */
-			return -ENODEV;
-	}
-
-	strlcpy(info->type, "fscpos", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int fscpos_probe(struct i2c_client *new_client,
-			const struct i2c_device_id *id)
-{
-	struct fscpos_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(new_client, data);
-	data->valid = 0;
-	mutex_init(&data->update_lock);
-
-	/* Inizialize the fscpos chip */
-	fscpos_init_client(new_client);
-
-	/* Announce that the chip was found */
-	dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision);
-
-	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group)))
-		goto exit_free;
-
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove_files;
-	}
-
-	return 0;
-
-exit_remove_files:
-	sysfs_remove_group(&new_client->dev.kobj, &fscpos_group);
-exit_free:
-	kfree(data);
-exit:
-	return err;
-}
-
-static int fscpos_remove(struct i2c_client *client)
-{
-	struct fscpos_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &fscpos_group);
-
-	kfree(data);
-	return 0;
-}
-
-static int fscpos_read_value(struct i2c_client *client, u8 reg)
-{
-	dev_dbg(&client->dev, "Read reg 0x%02x\n", reg);
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
-	dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value);
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Called when we have found a new FSCPOS chip */
-static void fscpos_init_client(struct i2c_client *client)
-{
-	struct fscpos_data *data = i2c_get_clientdata(client);
-
-	/* read revision from chip */
-	data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION);
-}
-
-static struct fscpos_data *fscpos_update_device(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct fscpos_data *data = i2c_get_clientdata(client);
-
-	mutex_lock(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
-		int i;
-
-		dev_dbg(&client->dev, "Starting fscpos update\n");
-
-		for (i = 0; i < 3; i++) {
-			data->temp_act[i] = fscpos_read_value(client,
-						FSCPOS_REG_TEMP_ACT[i]);
-			data->temp_status[i] = fscpos_read_value(client,
-						FSCPOS_REG_TEMP_STATE[i]);
-			data->fan_act[i] = fscpos_read_value(client,
-						FSCPOS_REG_FAN_ACT[i]);
-			data->fan_status[i] = fscpos_read_value(client,
-						FSCPOS_REG_FAN_STATE[i]);
-			data->fan_ripple[i] = fscpos_read_value(client,
-						FSCPOS_REG_FAN_RIPPLE[i]);
-			if (i < 2) {
-				/* fan2_min is not supported by the chip */
-				data->pwm[i] = fscpos_read_value(client,
-							FSCPOS_REG_PWM[i]);
-			}
-			/* reset fan status if speed is back to > 0 */
-			if (data->fan_status[i] != 0 && data->fan_act[i] > 0) {
-				reset_fan_alarm(client, i);
-			}
-		}
-
-		data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12);
-		data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5);
-		data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT);
-
-		data->wdog_preset = fscpos_read_value(client,
-							FSCPOS_REG_WDOG_PRESET);
-		data->wdog_state = fscpos_read_value(client,
-							FSCPOS_REG_WDOG_STATE);
-		data->wdog_control = fscpos_read_value(client,
-						FSCPOS_REG_WDOG_CONTROL);
-
-		data->global_event = fscpos_read_value(client,
-						FSCPOS_REG_EVENT_STATE);
-
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
-	mutex_unlock(&data->update_lock);
-	return data;
-}
-
-static int __init sm_fscpos_init(void)
-{
-	return i2c_add_driver(&fscpos_driver);
-}
-
-static void __exit sm_fscpos_exit(void)
-{
-	i2c_del_driver(&fscpos_driver);
-}
-
-MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung "
-				"<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>"
-				" and Philip Edelbrock <phil@netroedge.com>");
-MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver");
-MODULE_LICENSE("GPL");
-
-module_init(sm_fscpos_init);
-module_exit(sm_fscpos_exit);
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 271338bdb6b..cf5afb9a10a 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -454,6 +454,15 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 					(p->click_thresh_y << 4));
 		}
 
+		if (p->wakeup_flags && (dev->whoami == LIS_SINGLE_ID)) {
+			dev->write(dev, FF_WU_CFG_1, p->wakeup_flags);
+			dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f);
+			/* default to 2.5ms for now */
+			dev->write(dev, FF_WU_DURATION_1, 1);
+			/* enable high pass filter for both free-fall units */
+			dev->write(dev, CTRL_REG2, HP_FF_WU1 | HP_FF_WU2);
+		}
+
 		if (p->irq_cfg)
 			dev->write(dev, CTRL_REG3, p->irq_cfg);
 	}
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index e320e2f511f..3e1ff46f72d 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -58,15 +58,17 @@ enum lis3_reg {
 	OUTZ_L		= 0x2C,
 	OUTZ_H		= 0x2D,
 	OUTZ		= 0x2D,
-	FF_WU_CFG	= 0x30,
-	FF_WU_SRC	= 0x31,
-	FF_WU_ACK	= 0x32,
-	FF_WU_THS_L	= 0x34,
-	FF_WU_THS_H	= 0x35,
-	FF_WU_DURATION	= 0x36,
 };
 
 enum lis302d_reg {
+	FF_WU_CFG_1	= 0x30,
+	FF_WU_SRC_1	= 0x31,
+	FF_WU_THS_1	= 0x32,
+	FF_WU_DURATION_1 = 0x33,
+	FF_WU_CFG_2	= 0x34,
+	FF_WU_SRC_2	= 0x35,
+	FF_WU_THS_2	= 0x36,
+	FF_WU_DURATION_2 = 0x37,
 	CLICK_CFG	= 0x38,
 	CLICK_SRC	= 0x39,
 	CLICK_THSY_X	= 0x3B,
@@ -77,6 +79,12 @@ enum lis302d_reg {
 };
 
 enum lis3lv02d_reg {
+	FF_WU_CFG	= 0x30,
+	FF_WU_SRC	= 0x31,
+	FF_WU_ACK	= 0x32,
+	FF_WU_THS_L	= 0x34,
+	FF_WU_THS_H	= 0x35,
+	FF_WU_DURATION	= 0x36,
 	DD_CFG		= 0x38,
 	DD_SRC		= 0x39,
 	DD_ACK		= 0x3A,
@@ -107,6 +115,10 @@ enum lis3lv02d_ctrl2 {
 	CTRL2_FS	= 0x80, /* Full Scale selection */
 };
 
+enum lis302d_ctrl2 {
+	HP_FF_WU2	= 0x08,
+	HP_FF_WU1	= 0x04,
+};
 
 enum lis3lv02d_ctrl3 {
 	CTRL3_CFS0	= 0x01,
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index 3827ff04485..ecd739534f6 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -66,17 +66,16 @@ static int __devinit lis302dl_spi_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	lis3_dev.bus_priv = spi;
-	lis3_dev.init = lis3_spi_init;
-	lis3_dev.read = lis3_spi_read;
-	lis3_dev.write = lis3_spi_write;
-	lis3_dev.irq = spi->irq;
-	lis3_dev.ac = lis3lv02d_axis_normal;
-	lis3_dev.pdata = spi->dev.platform_data;
+	lis3_dev.bus_priv	= spi;
+	lis3_dev.init		= lis3_spi_init;
+	lis3_dev.read		= lis3_spi_read;
+	lis3_dev.write		= lis3_spi_write;
+	lis3_dev.irq		= spi->irq;
+	lis3_dev.ac		= lis3lv02d_axis_normal;
+	lis3_dev.pdata		= spi->dev.platform_data;
 	spi_set_drvdata(spi, &lis3_dev);
 
-	ret = lis3lv02d_init_device(&lis3_dev);
-	return ret;
+	return lis3lv02d_init_device(&lis3_dev);
 }
 
 static int __devexit lis302dl_spi_remove(struct spi_device *spi)
@@ -87,6 +86,32 @@ static int __devexit lis302dl_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int lis3lv02d_spi_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+
+	if (!lis3->pdata->wakeup_flags)
+		lis3lv02d_poweroff(&lis3_dev);
+
+	return 0;
+}
+
+static int lis3lv02d_spi_resume(struct spi_device *spi)
+{
+	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+
+	if (!lis3->pdata->wakeup_flags)
+		lis3lv02d_poweron(lis3);
+
+	return 0;
+}
+
+#else
+#define lis3lv02d_spi_suspend	NULL
+#define lis3lv02d_spi_resume	NULL
+#endif
+
 static struct spi_driver lis302dl_spi_driver = {
 	.driver	 = {
 		.name   = DRV_NAME,
@@ -94,6 +119,8 @@ static struct spi_driver lis302dl_spi_driver = {
 	},
 	.probe	= lis302dl_spi_probe,
 	.remove	= __devexit_p(lis302dl_spi_remove),
+	.suspend = lis3lv02d_spi_suspend,
+	.resume  = lis3lv02d_spi_resume,
 };
 
 static int __init lis302dl_init(void)
@@ -112,4 +139,4 @@ module_exit(lis302dl_exit);
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
 MODULE_DESCRIPTION("lis3lv02d SPI glue layer");
 MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index ae6204f3321..ab8a5d3c769 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -32,6 +32,7 @@
 #include <linux/sysfs.h>
 #include <linux/hwmon.h>
 #include <linux/mutex.h>
+#include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
 
 
@@ -130,11 +131,20 @@ static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL);
 
 /*----------------------------------------------------------------------*/
 
-static int __devinit common_probe(struct spi_device *spi, int chip)
+static int __devinit lm70_probe(struct spi_device *spi)
 {
+	int chip = spi_get_device_id(spi)->driver_data;
 	struct lm70 *p_lm70;
 	int status;
 
+	/* signaling is SPI_MODE_0 for both LM70 and TMP121 */
+	if (spi->mode & (SPI_CPOL | SPI_CPHA))
+		return -EINVAL;
+
+	/* 3-wire link (shared SI/SO) for LM70 */
+	if (chip == LM70_CHIP_LM70 && !(spi->mode & SPI_3WIRE))
+		return -EINVAL;
+
 	/* NOTE:  we assume 8-bit words, and convert to 16 bits manually */
 
 	p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL);
@@ -170,24 +180,6 @@ out_dev_reg_failed:
 	return status;
 }
 
-static int __devinit lm70_probe(struct spi_device *spi)
-{
-	/* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */
-	if ((spi->mode & (SPI_CPOL | SPI_CPHA)) || !(spi->mode & SPI_3WIRE))
-		return -EINVAL;
-
-	return common_probe(spi, LM70_CHIP_LM70);
-}
-
-static int __devinit tmp121_probe(struct spi_device *spi)
-{
-	/* signaling is SPI_MODE_0 with only MISO connected */
-	if (spi->mode & (SPI_CPOL | SPI_CPHA))
-		return -EINVAL;
-
-	return common_probe(spi, LM70_CHIP_TMP121);
-}
-
 static int __devexit lm70_remove(struct spi_device *spi)
 {
 	struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev);
@@ -201,41 +193,32 @@ static int __devexit lm70_remove(struct spi_device *spi)
 	return 0;
 }
 
-static struct spi_driver tmp121_driver = {
-	.driver = {
-		.name	= "tmp121",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= tmp121_probe,
-	.remove	= __devexit_p(lm70_remove),
+
+static const struct spi_device_id lm70_ids[] = {
+	{ "lm70",   LM70_CHIP_LM70 },
+	{ "tmp121", LM70_CHIP_TMP121 },
+	{ },
 };
+MODULE_DEVICE_TABLE(spi, lm70_ids);
 
 static struct spi_driver lm70_driver = {
 	.driver = {
 		.name	= "lm70",
 		.owner	= THIS_MODULE,
 	},
+	.id_table = lm70_ids,
 	.probe	= lm70_probe,
 	.remove	= __devexit_p(lm70_remove),
 };
 
 static int __init init_lm70(void)
 {
-	int ret = spi_register_driver(&lm70_driver);
-	if (ret)
-		return ret;
-
-	ret = spi_register_driver(&tmp121_driver);
-	if (ret)
-		spi_unregister_driver(&lm70_driver);
-
-	return ret;
+	return spi_register_driver(&lm70_driver);
 }
 
 static void __exit cleanup_lm70(void)
 {
 	spi_unregister_driver(&lm70_driver);
-	spi_unregister_driver(&tmp121_driver);
 }
 
 module_init(init_lm70);
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 9386e2a3921..6c9a04136e0 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -259,7 +259,7 @@ static int ltc4215_probe(struct i2c_client *client,
 	mutex_init(&data->update_lock);
 
 	/* Initialize the LTC4215 chip */
-	/* TODO */
+	i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00);
 
 	/* Register sysfs hooks */
 	ret = sysfs_create_group(&client->dev.kobj, &ltc4215_group);
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index 034b2c51584..e3896433361 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -382,7 +382,8 @@ static int ltc4245_probe(struct i2c_client *client,
 	mutex_init(&data->update_lock);
 
 	/* Initialize the LTC4245 chip */
-	/* TODO */
+	i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00);
+	i2c_smbus_write_byte_data(client, LTC4245_FAULT2, 0x00);
 
 	/* Register sysfs hooks */
 	ret = sysfs_create_group(&client->dev.kobj, &ltc4245_group);
diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c
index bfaa665ccf3..9ac497271ad 100644
--- a/drivers/hwmon/max1111.c
+++ b/drivers/hwmon/max1111.c
@@ -242,3 +242,4 @@ module_exit(max1111_exit);
 MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
 MODULE_DESCRIPTION("MAX1111 ADC Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:max1111");
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 6290a259456..303c02694c3 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -562,7 +562,7 @@ static int __devinit sht15_probe(struct platform_device *pdev)
 	ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
 	if (ret) {
 		dev_err(&pdev->dev, "sysfs create failed");
-		goto err_free_data;
+		goto err_release_gpio_data;
 	}
 
 	ret = request_irq(gpio_to_irq(data->pdata->gpio_data),
@@ -581,10 +581,12 @@ static int __devinit sht15_probe(struct platform_device *pdev)
 	data->hwmon_dev = hwmon_device_register(data->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		ret = PTR_ERR(data->hwmon_dev);
-		goto err_release_gpio_data;
+		goto err_release_irq;
 	}
 	return 0;
 
+err_release_irq:
+	free_irq(gpio_to_irq(data->pdata->gpio_data), data);
 err_release_gpio_data:
 	gpio_free(data->pdata->gpio_data);
 err_release_gpio_sck: