it87: Add support for the IT8716F

it87: Add support for the IT8716F

The IT8716F is a Super-I/O chip with integrated hardware monitoring
functions. It is very similar to the IT8712F, so adding support to the
it87 driver was pretty straightforward. The most significant change here
is that the IT8716F has 16-bit fan speed counters, so the user no more
needs to tweak the fan clock dividers to get the best readings.

Userspace support is already in lm_sensors SVN (to be soon released
as 2.10.1.)

Thanks to Stian Oksavik, Olivier Nicolas, Prakash Punnoor and
Juergen Kilb for testing the early versions of this patch.

Thanks also to ITE for providing datasheets and answering my questions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 156 insertions, 26 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0e31a0c496e..cefb1adf453 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -186,8 +186,8 @@ config SENSORS_IT87
 	select I2C_ISA
 	select HWMON_VID
 	help
-	  If you say yes here you get support for ITE IT87xx sensor chips
-	  and clones: SiS960.
+	  If you say yes here you get support for ITE IT8705F, IT8712F and
+	  IT8716F sensor chips, and the SiS960 clone.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called it87.
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index b0ee5749222..e7f14e61d6f 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -4,6 +4,7 @@
 
     Supports: IT8705F  Super I/O chip w/LPC interface
               IT8712F  Super I/O chip w/LPC interface & SMBus
+              IT8716F  Super I/O chip w/LPC interface
               Sis950   A clone of the IT8705F
 
     Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com> 
@@ -50,7 +51,7 @@ static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
 static unsigned short isa_address;
 
 /* Insmod parameters */
-I2C_CLIENT_INSMOD_2(it87, it8712);
+I2C_CLIENT_INSMOD_3(it87, it8712, it8716);
 
 #define	REG	0x2e	/* The register to read/write */
 #define	DEV	0x07	/* Register: Logical device select */
@@ -101,6 +102,7 @@ superio_exit(void)
 
 #define IT8712F_DEVID 0x8712
 #define IT8705F_DEVID 0x8705
+#define IT8716F_DEVID 0x8716
 #define IT87_ACT_REG  0x30
 #define IT87_BASE_REG 0x60
 
@@ -132,12 +134,18 @@ static u16 chip_type;
 #define IT87_REG_ALARM3        0x03
 
 #define IT87_REG_VID           0x0a
+/* Warning: register 0x0b is used for something completely different in
+   new chips/revisions. I suspect only 16-bit tachometer mode will work
+   for these. */
 #define IT87_REG_FAN_DIV       0x0b
+#define IT87_REG_FAN_16BIT     0x0c
 
 /* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
 
 #define IT87_REG_FAN(nr)       (0x0d + (nr))
 #define IT87_REG_FAN_MIN(nr)   (0x10 + (nr))
+#define IT87_REG_FANX(nr)      (0x18 + (nr))
+#define IT87_REG_FANX_MIN(nr)  (0x1b + (nr))
 #define IT87_REG_FAN_MAIN_CTRL 0x13
 #define IT87_REG_FAN_CTL       0x14
 #define IT87_REG_PWM(nr)       (0x15 + (nr))
@@ -169,7 +177,16 @@ static inline u8 FAN_TO_REG(long rpm, int div)
 			     254);
 }
 
+static inline u16 FAN16_TO_REG(long rpm)
+{
+	if (rpm == 0)
+		return 0xffff;
+	return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
+}
+
 #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+/* The divider is fixed to 2 in 16-bit mode */
+#define FAN16_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:1350000/((val)*2))
 
 #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
 					((val)+500)/1000),-128,127))
@@ -205,8 +222,8 @@ struct it87_data {
 	u8 in[9];		/* Register value */
 	u8 in_max[9];		/* Register value */
 	u8 in_min[9];		/* Register value */
-	u8 fan[3];		/* Register value */
-	u8 fan_min[3];		/* Register value */
+	u16 fan[3];		/* Register values, possibly combined */
+	u16 fan_min[3];		/* Register values, possibly combined */
 	u8 temp[3];		/* Register value */
 	u8 temp_high[3];	/* Register value */
 	u8 temp_low[3];		/* Register value */
@@ -657,6 +674,59 @@ show_pwm_offset(1);
 show_pwm_offset(2);
 show_pwm_offset(3);
 
+/* A different set of callbacks for 16-bit fans */
+static ssize_t show_fan16(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr]));
+}
+
+static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct it87_data *data = it87_update_device(dev);
+	return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr]));
+}
+
+static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct it87_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->fan_min[nr] = FAN16_TO_REG(val);
+	it87_write_value(client, IT87_REG_FAN_MIN(nr),
+			 data->fan_min[nr] & 0xff);
+	it87_write_value(client, IT87_REG_FANX_MIN(nr),
+			 data->fan_min[nr] >> 8);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/* We want to use the same sysfs file names as 8-bit fans, but we need
+   different variable names, so we have to use SENSOR_ATTR instead of
+   SENSOR_DEVICE_ATTR. */
+#define show_fan16_offset(offset) \
+static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \
+	= SENSOR_ATTR(fan##offset##_input, S_IRUGO,		\
+		show_fan16, NULL, offset - 1);			\
+static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \
+	= SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,	\
+		show_fan16_min, set_fan16_min, offset - 1)
+
+show_fan16_offset(1);
+show_fan16_offset(2);
+show_fan16_offset(3);
+
 /* Alarms */
 static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -721,6 +791,7 @@ static int __init it87_find(unsigned short *address)
 	superio_enter();
 	chip_type = superio_inw(DEVID);
 	if (chip_type != IT8712F_DEVID
+	 && chip_type != IT8716F_DEVID
 	 && chip_type != IT8705F_DEVID)
 	 	goto exit;
 
@@ -800,8 +871,16 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
 		i = it87_read_value(new_client, IT87_REG_CHIPID);
 		if (i == 0x90) {
 			kind = it87;
-			if ((is_isa) && (chip_type == IT8712F_DEVID))
-				kind = it8712;
+			if (is_isa) {
+				switch (chip_type) {
+				case IT8712F_DEVID:
+					kind = it8712;
+					break;
+				case IT8716F_DEVID:
+					kind = it8716;
+					break;
+				}
+			}
 		}
 		else {
 			if (kind == 0)
@@ -818,6 +897,8 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
 		name = "it87";
 	} else if (kind == it8712) {
 		name = "it8712";
+	} else if (kind == it8716) {
+		name = "it8716";
 	}
 
 	/* Fill in the remaining client fields and put it into the global list */
@@ -885,15 +966,41 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
 	device_create_file(&new_client->dev, &sensor_dev_attr_temp1_type.dev_attr);
 	device_create_file(&new_client->dev, &sensor_dev_attr_temp2_type.dev_attr);
 	device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr);
-	device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr);
+
+	if (data->type == it8716) { /* 16-bit tachometers */
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan1_input16.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan2_input16.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan3_input16.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan1_min16.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan2_min16.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan3_min16.dev_attr);
+	} else {
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan1_input.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan2_input.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan3_input.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan1_min.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan2_min.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan3_min.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan1_div.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan2_div.dev_attr);
+		device_create_file(&new_client->dev,
+				   &sensor_dev_attr_fan3_div.dev_attr);
+	}
+
 	device_create_file(&new_client->dev, &dev_attr_alarms);
 	if (enable_pwm_interface) {
 		device_create_file(&new_client->dev, &sensor_dev_attr_pwm1_enable.dev_attr);
@@ -904,7 +1011,7 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
 		device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr);
 	}
 
-	if (data->type == it8712) {
+	if (data->type == it8712 || data->type == it8716) {
 		data->vrm = vid_which_vrm();
 		device_create_file_vrm(new_client);
 		device_create_file_vid(new_client);
@@ -1069,6 +1176,17 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data)
 		it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
 	}
 
+	/* Set tachometers to 16-bit mode if needed */
+	if (data->type == it8716) {
+		tmp = it87_read_value(client, IT87_REG_FAN_16BIT);
+		if ((tmp & 0x07) != 0x07) {
+			dev_dbg(&client->dev,
+				"Setting fan1-3 to 16-bit mode\n");
+			it87_write_value(client, IT87_REG_FAN_16BIT,
+					 tmp | 0x07);
+		}
+	}
+
 	/* Set current fan mode registers and the default settings for the
 	 * other mode registers */
 	for (i = 0; i < 3; i++) {
@@ -1126,10 +1244,17 @@ static struct it87_data *it87_update_device(struct device *dev)
 		data->in_max[8] = 255;
 
 		for (i = 0; i < 3; i++) {
-			data->fan[i] =
-			    it87_read_value(client, IT87_REG_FAN(i));
 			data->fan_min[i] =
 			    it87_read_value(client, IT87_REG_FAN_MIN(i));
+			data->fan[i] = it87_read_value(client,
+				       IT87_REG_FAN(i));
+			/* Add high byte if in 16-bit mode */
+			if (data->type == it8716) {
+				data->fan[i] |= it87_read_value(client,
+						IT87_REG_FANX(i)) << 8;
+				data->fan_min[i] |= it87_read_value(client,
+						IT87_REG_FANX_MIN(i)) << 8;
+			}
 		}
 		for (i = 0; i < 3; i++) {
 			data->temp[i] =
@@ -1140,10 +1265,13 @@ static struct it87_data *it87_update_device(struct device *dev)
 			    it87_read_value(client, IT87_REG_TEMP_LOW(i));
 		}
 
-		i = it87_read_value(client, IT87_REG_FAN_DIV);
-		data->fan_div[0] = i & 0x07;
-		data->fan_div[1] = (i >> 3) & 0x07;
-		data->fan_div[2] = (i & 0x40) ? 3 : 1;
+		/* Newer chips don't have clock dividers */
+		if (data->type != it8716) {
+			i = it87_read_value(client, IT87_REG_FAN_DIV);
+			data->fan_div[0] = i & 0x07;
+			data->fan_div[1] = (i >> 3) & 0x07;
+			data->fan_div[2] = (i & 0x40) ? 3 : 1;
+		}
 
 		data->alarms =
 			it87_read_value(client, IT87_REG_ALARM1) |
@@ -1153,9 +1281,11 @@ static struct it87_data *it87_update_device(struct device *dev)
 
 		data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
 		/* The 8705 does not have VID capability */
-		if (data->type == it8712) {
+		if (data->type == it8712 || data->type == it8716) {
 			data->vid = it87_read_value(client, IT87_REG_VID);
-			data->vid &= 0x1f;
+			/* The older IT8712F revisions had only 5 VID pins,
+			   but we assume it is always safe to read 6 bits. */
+			data->vid &= 0x3f;
 		}
 		data->last_updated = jiffies;
 		data->valid = 1;
@@ -1194,7 +1324,7 @@ static void __exit sm_it87_exit(void)
 
 
 MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>");
-MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
+MODULE_DESCRIPTION("IT8705F/8712F/8716F, SiS950 driver");
 module_param(update_vbat, bool, 0);
 MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
 module_param(fix_pwm_polarity, bool, 0);