hwmon: Driver for NTC Thermistors

Add support for NTC Thermistor series. In this release, the
following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473,
and NCP15WL333. This driver is based on the datasheet of MURATA.

The driver in the patch does conversion from the raw ADC value
(either voltage or resistence) to temperature. In order to use
voltage values as input, the circuit schematics should be provided
with the platform data. A compensation table for each type of thermistor
is provided for the conversion.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

3 files changed, 468 insertions, 0 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index dec5eee3542..770fc819562 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -777,6 +777,20 @@ config SENSORS_MAX6650
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6650.
 
+config SENSORS_NTC_THERMISTOR
+	tristate "NTC thermistor support"
+	depends on EXPERIMENTAL
+	help
+	  This driver supports NTC thermistors sensor reading and its
+	  interpretation. The driver can also monitor the temperature and
+	  send notifications about the temperature.
+
+	  Currently, this driver supports
+	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ntc-thermistor.
+
 config SENSORS_PC87360
 	tristate "National Semiconductor PC87360 family"
 	select HWMON_VID
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index a6d519e568c..1b7dc770aa6 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
 obj-$(CONFIG_SENSORS_MAX6642)	+= max6642.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
+obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
new file mode 100644
index 00000000000..d7926f4336b
--- /dev/null
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -0,0 +1,453 @@
+/*
+ * ntc_thermistor.c - NTC Thermistors
+ *
+ *  Copyright (C) 2010 Samsung Electronics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/math64.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+
+#include <linux/platform_data/ntc_thermistor.h>
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+struct ntc_compensation {
+	int		temp_C;
+	unsigned int	ohm;
+};
+
+/*
+ * A compensation table should be sorted by the values of .ohm
+ * in descending order.
+ * The following compensation tables are from the specification of Murata NTC
+ * Thermistors Datasheet
+ */
+const struct ntc_compensation ncpXXwb473[] = {
+	{ .temp_C	= -40, .ohm	= 1747920 },
+	{ .temp_C	= -35, .ohm	= 1245428 },
+	{ .temp_C	= -30, .ohm	= 898485 },
+	{ .temp_C	= -25, .ohm	= 655802 },
+	{ .temp_C	= -20, .ohm	= 483954 },
+	{ .temp_C	= -15, .ohm	= 360850 },
+	{ .temp_C	= -10, .ohm	= 271697 },
+	{ .temp_C	= -5, .ohm	= 206463 },
+	{ .temp_C	= 0, .ohm	= 158214 },
+	{ .temp_C	= 5, .ohm	= 122259 },
+	{ .temp_C	= 10, .ohm	= 95227 },
+	{ .temp_C	= 15, .ohm	= 74730 },
+	{ .temp_C	= 20, .ohm	= 59065 },
+	{ .temp_C	= 25, .ohm	= 47000 },
+	{ .temp_C	= 30, .ohm	= 37643 },
+	{ .temp_C	= 35, .ohm	= 30334 },
+	{ .temp_C	= 40, .ohm	= 24591 },
+	{ .temp_C	= 45, .ohm	= 20048 },
+	{ .temp_C	= 50, .ohm	= 16433 },
+	{ .temp_C	= 55, .ohm	= 13539 },
+	{ .temp_C	= 60, .ohm	= 11209 },
+	{ .temp_C	= 65, .ohm	= 9328 },
+	{ .temp_C	= 70, .ohm	= 7798 },
+	{ .temp_C	= 75, .ohm	= 6544 },
+	{ .temp_C	= 80, .ohm	= 5518 },
+	{ .temp_C	= 85, .ohm	= 4674 },
+	{ .temp_C	= 90, .ohm	= 3972 },
+	{ .temp_C	= 95, .ohm	= 3388 },
+	{ .temp_C	= 100, .ohm	= 2902 },
+	{ .temp_C	= 105, .ohm	= 2494 },
+	{ .temp_C	= 110, .ohm	= 2150 },
+	{ .temp_C	= 115, .ohm	= 1860 },
+	{ .temp_C	= 120, .ohm	= 1615 },
+	{ .temp_C	= 125, .ohm	= 1406 },
+};
+const struct ntc_compensation ncpXXwl333[] = {
+	{ .temp_C	= -40, .ohm	= 1610154 },
+	{ .temp_C	= -35, .ohm	= 1130850 },
+	{ .temp_C	= -30, .ohm	= 802609 },
+	{ .temp_C	= -25, .ohm	= 575385 },
+	{ .temp_C	= -20, .ohm	= 416464 },
+	{ .temp_C	= -15, .ohm	= 304219 },
+	{ .temp_C	= -10, .ohm	= 224193 },
+	{ .temp_C	= -5, .ohm	= 166623 },
+	{ .temp_C	= 0, .ohm	= 124850 },
+	{ .temp_C	= 5, .ohm	= 94287 },
+	{ .temp_C	= 10, .ohm	= 71747 },
+	{ .temp_C	= 15, .ohm	= 54996 },
+	{ .temp_C	= 20, .ohm	= 42455 },
+	{ .temp_C	= 25, .ohm	= 33000 },
+	{ .temp_C	= 30, .ohm	= 25822 },
+	{ .temp_C	= 35, .ohm	= 20335 },
+	{ .temp_C	= 40, .ohm	= 16115 },
+	{ .temp_C	= 45, .ohm	= 12849 },
+	{ .temp_C	= 50, .ohm	= 10306 },
+	{ .temp_C	= 55, .ohm	= 8314 },
+	{ .temp_C	= 60, .ohm	= 6746 },
+	{ .temp_C	= 65, .ohm	= 5503 },
+	{ .temp_C	= 70, .ohm	= 4513 },
+	{ .temp_C	= 75, .ohm	= 3721 },
+	{ .temp_C	= 80, .ohm	= 3084 },
+	{ .temp_C	= 85, .ohm	= 2569 },
+	{ .temp_C	= 90, .ohm	= 2151 },
+	{ .temp_C	= 95, .ohm	= 1809 },
+	{ .temp_C	= 100, .ohm	= 1529 },
+	{ .temp_C	= 105, .ohm	= 1299 },
+	{ .temp_C	= 110, .ohm	= 1108 },
+	{ .temp_C	= 115, .ohm	= 949 },
+	{ .temp_C	= 120, .ohm	= 817 },
+	{ .temp_C	= 125, .ohm	= 707 },
+};
+
+struct ntc_data {
+	struct device *hwmon_dev;
+	struct ntc_thermistor_platform_data *pdata;
+	const struct ntc_compensation *comp;
+	struct device *dev;
+	int n_comp;
+	char name[PLATFORM_NAME_SIZE];
+};
+
+static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
+{
+	if (divisor == 0 && dividend == 0)
+		return 0;
+	if (divisor == 0)
+		return UINT_MAX;
+	return div64_u64(dividend, divisor);
+}
+
+static unsigned int get_ohm_of_thermistor(struct ntc_data *data,
+		unsigned int uV)
+{
+	struct ntc_thermistor_platform_data *pdata = data->pdata;
+	u64 mV = uV / 1000;
+	u64 pmV = pdata->pullup_uV / 1000;
+	u64 N, puO, pdO;
+	puO = pdata->pullup_ohm;
+	pdO = pdata->pulldown_ohm;
+
+	if (mV == 0) {
+		if (pdata->connect == NTC_CONNECTED_POSITIVE)
+			return UINT_MAX;
+		return 0;
+	}
+	if (mV >= pmV)
+		return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
+			0 : UINT_MAX;
+
+	if (pdata->connect == NTC_CONNECTED_POSITIVE && puO == 0)
+		N = div64_u64_safe(pdO * (pmV - mV), mV);
+	else if (pdata->connect == NTC_CONNECTED_GROUND && pdO == 0)
+		N = div64_u64_safe(puO * mV, pmV - mV);
+	else if (pdata->connect == NTC_CONNECTED_POSITIVE)
+		N = div64_u64_safe(pdO * puO * (pmV - mV),
+				puO * mV - pdO * (pmV - mV));
+	else
+		N = div64_u64_safe(pdO * puO * mV, pdO * (pmV - mV) - puO * mV);
+
+	return (unsigned int) N;
+}
+
+static int lookup_comp(struct ntc_data *data,
+		unsigned int ohm, int *i_low, int *i_high)
+{
+	int start, end, mid = -1;
+
+	/* Do a binary search on compensation table */
+	start = 0;
+	end = data->n_comp;
+
+	while (end > start) {
+		mid = start + (end - start) / 2;
+		if (data->comp[mid].ohm < ohm)
+			end = mid;
+		else if (data->comp[mid].ohm > ohm)
+			start = mid + 1;
+		else
+			break;
+	}
+
+	if (mid == 0) {
+		if (data->comp[mid].ohm > ohm) {
+			*i_high = mid;
+			*i_low = mid + 1;
+			return 0;
+		} else {
+			*i_low = mid;
+			*i_high = -1;
+			return -EINVAL;
+		}
+	}
+	if (mid == (data->n_comp - 1)) {
+		if (data->comp[mid].ohm <= ohm) {
+			*i_low = mid;
+			*i_high = mid - 1;
+			return 0;
+		} else {
+			*i_low = -1;
+			*i_high = mid;
+			return -EINVAL;
+		}
+	}
+
+	if (data->comp[mid].ohm <= ohm) {
+		*i_low = mid;
+		*i_high = mid - 1;
+	}
+	if (data->comp[mid].ohm > ohm) {
+		*i_low = mid + 1;
+		*i_high = mid;
+	}
+
+	return 0;
+}
+
+static int get_temp_mC(struct ntc_data *data, unsigned int ohm, int *temp)
+{
+	int low, high;
+	int ret;
+
+	ret = lookup_comp(data, ohm, &low, &high);
+	if (ret) {
+		/* Unable to use linear approximation */
+		if (low != -1)
+			*temp = data->comp[low].temp_C * 1000;
+		else if (high != -1)
+			*temp = data->comp[high].temp_C * 1000;
+		else
+			return ret;
+	} else {
+		*temp = data->comp[low].temp_C * 1000 +
+			((data->comp[high].temp_C - data->comp[low].temp_C) *
+			 1000 * ((int)ohm - (int)data->comp[low].ohm)) /
+			((int)data->comp[high].ohm - (int)data->comp[low].ohm);
+	}
+
+	return 0;
+}
+
+static int ntc_thermistor_read(struct ntc_data *data, int *temp)
+{
+	int ret;
+	int read_ohm, read_uV;
+	unsigned int ohm = 0;
+
+	if (data->pdata->read_ohm) {
+		read_ohm = data->pdata->read_ohm();
+		if (read_ohm < 0)
+			return read_ohm;
+		ohm = (unsigned int)read_ohm;
+	}
+
+	if (data->pdata->read_uV) {
+		read_uV = data->pdata->read_uV();
+		if (read_uV < 0)
+			return read_uV;
+		ohm = get_ohm_of_thermistor(data, (unsigned int)read_uV);
+	}
+
+	ret = get_temp_mC(data, ohm, temp);
+	if (ret) {
+		dev_dbg(data->dev, "Sensor reading function not available.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static ssize_t ntc_show_name(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ntc_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", data->name);
+}
+
+static ssize_t ntc_show_type(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "4\n");
+}
+
+static ssize_t ntc_show_temp(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ntc_data *data = dev_get_drvdata(dev);
+	int temp, ret;
+
+	ret = ntc_thermistor_read(data, &temp);
+	if (ret)
+		return ret;
+	return sprintf(buf, "%d\n", temp);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, ntc_show_type, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ntc_show_temp, NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, ntc_show_name, NULL);
+
+static struct attribute *ntc_attributes[] = {
+	&dev_attr_name.attr,
+	&sensor_dev_attr_temp1_type.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ntc_attr_group = {
+	.attrs = ntc_attributes,
+};
+
+static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
+{
+	struct ntc_data *data;
+	struct ntc_thermistor_platform_data *pdata = pdev->dev.platform_data;
+	int ret = 0;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform init data supplied.\n");
+		return -ENODEV;
+	}
+
+	/* Either one of the two is required. */
+	if (!pdata->read_uV && !pdata->read_ohm) {
+		dev_err(&pdev->dev, "Both read_uV and read_ohm missing."
+				"Need either one of the two.\n");
+		return -EINVAL;
+	}
+
+	if (pdata->read_uV && pdata->read_ohm) {
+		dev_warn(&pdev->dev, "Only one of read_uV and read_ohm "
+				"is needed; ignoring read_uV.\n");
+		pdata->read_uV = NULL;
+	}
+
+	if (pdata->read_uV && (pdata->pullup_uV == 0 ||
+				(pdata->pullup_ohm == 0 && pdata->connect ==
+				 NTC_CONNECTED_GROUND) ||
+				(pdata->pulldown_ohm == 0 && pdata->connect ==
+				 NTC_CONNECTED_POSITIVE) ||
+				(pdata->connect != NTC_CONNECTED_POSITIVE &&
+				 pdata->connect != NTC_CONNECTED_GROUND))) {
+		dev_err(&pdev->dev, "Required data to use read_uV not "
+				"supplied.\n");
+		return -EINVAL;
+	}
+
+	data = kzalloc(sizeof(struct ntc_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = &pdev->dev;
+	data->pdata = pdata;
+	strncpy(data->name, pdev->id_entry->name, PLATFORM_NAME_SIZE);
+
+	switch (pdev->id_entry->driver_data) {
+	case TYPE_NCPXXWB473:
+		data->comp = ncpXXwb473;
+		data->n_comp = ARRAY_SIZE(ncpXXwb473);
+		break;
+	case TYPE_NCPXXWL333:
+		data->comp = ncpXXwl333;
+		data->n_comp = ARRAY_SIZE(ncpXXwl333);
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
+				pdev->id_entry->driver_data,
+				pdev->id_entry->name);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	ret = sysfs_create_group(&data->dev->kobj, &ntc_attr_group);
+	if (ret) {
+		dev_err(data->dev, "unable to create sysfs files\n");
+		goto err;
+	}
+
+	data->hwmon_dev = hwmon_device_register(data->dev);
+	if (IS_ERR_OR_NULL(data->hwmon_dev)) {
+		dev_err(data->dev, "unable to register as hwmon device.\n");
+		ret = -EINVAL;
+		goto err_after_sysfs;
+	}
+
+	dev_info(&pdev->dev, "Thermistor %s:%d (type: %s/%lu) successfully probed.\n",
+			pdev->name, pdev->id, pdev->id_entry->name,
+			pdev->id_entry->driver_data);
+	return 0;
+err_after_sysfs:
+	sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
+err:
+	kfree(data);
+	return ret;
+}
+
+static int __devexit ntc_thermistor_remove(struct platform_device *pdev)
+{
+	struct ntc_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(data);
+
+	return 0;
+}
+
+static const struct platform_device_id ntc_thermistor_id[] = {
+	{ "ncp15wb473", TYPE_NCPXXWB473 },
+	{ "ncp18wb473", TYPE_NCPXXWB473 },
+	{ "ncp21wb473", TYPE_NCPXXWB473 },
+	{ "ncp03wb473", TYPE_NCPXXWB473 },
+	{ "ncp15wl333", TYPE_NCPXXWL333 },
+	{ },
+};
+
+static struct platform_driver ntc_thermistor_driver = {
+	.driver = {
+		.name = "ntc-thermistor",
+		.owner = THIS_MODULE,
+	},
+	.probe = ntc_thermistor_probe,
+	.remove = __devexit_p(ntc_thermistor_remove),
+	.id_table = ntc_thermistor_id,
+};
+
+static int __init ntc_thermistor_init(void)
+{
+	return platform_driver_register(&ntc_thermistor_driver);
+}
+
+module_init(ntc_thermistor_init);
+
+static void __exit ntc_thermistor_cleanup(void)
+{
+	platform_driver_unregister(&ntc_thermistor_driver);
+}
+
+module_exit(ntc_thermistor_cleanup);
+
+MODULE_DESCRIPTION("NTC Thermistor Driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ntc-thermistor");