Merge branch 'master' into for-next

Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.

14 files changed, 268 insertions, 86 deletions

diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index 1e4c21fc1a8..86d822aa9bb 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -178,11 +178,13 @@ static int ad7414_probe(struct i2c_client *client,
 {
 	struct ad7414_data *data;
 	int conf;
-	int err = 0;
+	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+				     I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+		err = -EOPNOTSUPP;
 		goto exit;
+	}
 
 	data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL);
 	if (!data) {
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 4bf969c0a32..be0fdd58aa2 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -916,27 +916,27 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1026_data *data = i2c_get_clientdata(client);
-	int val, orig_div, new_div, shift;
+	int val, orig_div, new_div;
 
 	val = simple_strtol(buf, NULL, 10);
 	new_div = DIV_TO_REG(val);
-	if (new_div == 0) {
-		return -EINVAL;
-	}
+
 	mutex_lock(&data->update_lock);
 	orig_div = data->fan_div[nr];
 	data->fan_div[nr] = DIV_FROM_REG(new_div);
 
 	if (nr < 4) { /* 0 <= nr < 4 */
-		shift = 2 * nr;
 		adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
-			((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
-			(new_div << shift)));
+				    (DIV_TO_REG(data->fan_div[0]) << 0) |
+				    (DIV_TO_REG(data->fan_div[1]) << 2) |
+				    (DIV_TO_REG(data->fan_div[2]) << 4) |
+				    (DIV_TO_REG(data->fan_div[3]) << 6));
 	} else { /* 3 < nr < 8 */
-		shift = 2 * (nr - 4);
 		adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
-			((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
-			(new_div << shift)));
+				    (DIV_TO_REG(data->fan_div[4]) << 0) |
+				    (DIV_TO_REG(data->fan_div[5]) << 2) |
+				    (DIV_TO_REG(data->fan_div[6]) << 4) |
+				    (DIV_TO_REG(data->fan_div[7]) << 6));
 	}
 
 	if (data->fan_div[nr] != orig_div) {
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 9e775717abb..87d92a56a93 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -1286,8 +1286,10 @@ static int adt7470_probe(struct i2c_client *client,
 	init_completion(&data->auto_update_stop);
 	data->auto_update = kthread_run(adt7470_update_thread, client,
 					dev_name(data->hwmon_dev));
-	if (IS_ERR(data->auto_update))
+	if (IS_ERR(data->auto_update)) {
+		err = PTR_ERR(data->auto_update);
 		goto exit_unregister;
+	}
 
 	return 0;
 
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index fa9708c2d72..4033974d1bb 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -4,7 +4,7 @@
 	Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
 
 	Based on max6650.c:
-	Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+	Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
 
 	This program is free software; you can redistribute it and/or modify
 	it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index aa701a18370..f141a1de519 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -376,10 +376,6 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 		}
 	}
 
-	err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
-	if (err)
-		goto err_free_gpio;
-
 	fan_data->num_ctrl = num_ctrl;
 	fan_data->ctrl = ctrl;
 	fan_data->num_speed = pdata->num_speed;
@@ -391,6 +387,10 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 		goto err_free_gpio;
 	}
 
+	err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
+	if (err)
+		goto err_free_gpio;
+
 	return 0;
 
 err_free_gpio:
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 937983407e2..c4c40be0edb 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -497,12 +497,14 @@ static unsigned long chipset_ids[] = {
 	0
 };
 
+#ifdef MODULE
 static struct pci_device_id i5k_amb_ids[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
+#endif
 
 static int __devinit i5k_amb_probe(struct platform_device *pdev)
 {
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 14a5d981be7..a428a926419 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -187,6 +187,7 @@ static const u8 IT87_REG_FANX_MIN[]	= { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
 #define IT87_REG_FAN_MAIN_CTRL 0x13
 #define IT87_REG_FAN_CTL       0x14
 #define IT87_REG_PWM(nr)       (0x15 + (nr))
+#define IT87_REG_PWM_DUTY(nr)  (0x63 + (nr) * 8)
 
 #define IT87_REG_VIN(nr)       (0x20 + (nr))
 #define IT87_REG_TEMP(nr)      (0x29 + (nr))
@@ -251,12 +252,16 @@ struct it87_data {
 	u8 fan_main_ctrl;	/* Register value */
 	u8 fan_ctl;		/* Register value */
 
-	/* The following 3 arrays correspond to the same registers. The
-	 * meaning of bits 6-0 depends on the value of bit 7, and we want
-	 * to preserve settings on mode changes, so we have to track all
-	 * values separately. */
+	/* The following 3 arrays correspond to the same registers up to
+	 * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+	 * 7, and we want to preserve settings on mode changes, so we have
+	 * to track all values separately.
+	 * Starting with the IT8721F, the manual PWM duty cycles are stored
+	 * in separate registers (8-bit values), so the separate tracking
+	 * is no longer needed, but it is still done to keep the driver
+	 * simple. */
 	u8 pwm_ctrl[3];		/* Register value */
-	u8 pwm_duty[3];		/* Manual PWM value set by user (bit 6-0) */
+	u8 pwm_duty[3];		/* Manual PWM value set by user */
 	u8 pwm_temp_map[3];	/* PWM to temp. chan. mapping (bits 1-0) */
 
 	/* Automatic fan speed control registers */
@@ -832,7 +837,9 @@ static ssize_t set_pwm_enable(struct device *dev,
 				 data->fan_main_ctrl);
 	} else {
 		if (val == 1)				/* Manual mode */
-			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+			data->pwm_ctrl[nr] = data->type == it8721 ?
+					     data->pwm_temp_map[nr] :
+					     data->pwm_duty[nr];
 		else					/* Automatic mode */
 			data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
 		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
@@ -858,12 +865,25 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
-	data->pwm_duty[nr] = pwm_to_reg(data, val);
-	/* If we are in manual mode, write the duty cycle immediately;
-	 * otherwise, just store it for later use. */
-	if (!(data->pwm_ctrl[nr] & 0x80)) {
-		data->pwm_ctrl[nr] = data->pwm_duty[nr];
-		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+	if (data->type == it8721) {
+		/* If we are in automatic mode, the PWM duty cycle register
+		 * is read-only so we can't write the value */
+		if (data->pwm_ctrl[nr] & 0x80) {
+			mutex_unlock(&data->update_lock);
+			return -EBUSY;
+		}
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		it87_write_value(data, IT87_REG_PWM_DUTY(nr),
+				 data->pwm_duty[nr]);
+	} else {
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		/* If we are in manual mode, write the duty cycle immediately;
+		 * otherwise, just store it for later use. */
+		if (!(data->pwm_ctrl[nr] & 0x80)) {
+			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+			it87_write_value(data, IT87_REG_PWM(nr),
+					 data->pwm_ctrl[nr]);
+		}
 	}
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -1958,7 +1978,10 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	 *   channels to use when later setting to automatic mode later.
 	 *   Use a 1:1 mapping by default (we are clueless.)
 	 * In both cases, the value can (and should) be changed by the user
-	 * prior to switching to a different mode. */
+	 * prior to switching to a different mode.
+	 * Note that this is no longer needed for the IT8721F and later, as
+	 * these have separate registers for the temperature mapping and the
+	 * manual duty cycle. */
 	for (i = 0; i < 3; i++) {
 		data->pwm_temp_map[i] = i;
 		data->pwm_duty[i] = 0x7f;	/* Full speed */
@@ -2034,10 +2057,16 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
 {
 	data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
-	if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
+	if (data->type == it8721) {
 		data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
-	else				/* Manual mode */
-		data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+		data->pwm_duty[nr] = it87_read_value(data,
+						     IT87_REG_PWM_DUTY(nr));
+	} else {
+		if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
+			data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+		else				/* Manual mode */
+			data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+	}
 
 	if (has_old_autopwm(data)) {
 		int i;
diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index 9f4bae07f71..8853afce85c 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -186,7 +186,7 @@ static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int lis3lv02d_i2c_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -213,12 +213,9 @@ static int lis3lv02d_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#else
-#define lis3lv02d_i2c_suspend	NULL
-#define lis3lv02d_i2c_resume	NULL
-#define lis3lv02d_i2c_shutdown	NULL
-#endif
+#endif /* CONFIG_PM_SLEEP */
 
+#ifdef CONFIG_PM_RUNTIME
 static int lis3_i2c_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -236,6 +233,7 @@ static int lis3_i2c_runtime_resume(struct device *dev)
 	lis3lv02d_poweron(lis3);
 	return 0;
 }
+#endif /* CONFIG_PM_RUNTIME */
 
 static const struct i2c_device_id lis3lv02d_id[] = {
 	{"lis3lv02d", 0 },
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 6669255aadc..c9ed14eba5a 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -20,7 +20,7 @@
     Adapted to 2.6.20 by Carsten Emde <cbe@osadl.org>
         Copyright (c) 2006 Carsten Emde, Open Source Automation Development Lab
 
-    Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+    Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
         Copyright (c) 2007 Hans J. Koch, Linutronix GmbH
 
     This program is free software; you can redistribute it and/or modify
@@ -2629,7 +2629,7 @@ static void __exit lm93_exit(void)
 }
 
 MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>, "
-		"Hans J. Koch <hjk@linutronix.de");
+		"Hans J. Koch <hjk@hansjkoch.de>");
 MODULE_DESCRIPTION("LM93 driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 464340f2549..4546d82f024 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -128,9 +128,12 @@ static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm95241_data *data = i2c_get_clientdata(client);
+	unsigned long val;
 
-	strict_strtol(buf, 10, &data->interval);
-	data->interval = data->interval * HZ / 1000;
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	data->interval = val * HZ / 1000;
 
 	return count;
 }
@@ -188,7 +191,9 @@ static ssize_t set_type##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL; \
 \
 	if ((val == 1) || (val == 2)) { \
 \
@@ -227,7 +232,9 @@ static ssize_t set_min##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL;\
 \
 	mutex_lock(&data->update_lock); \
 \
@@ -256,7 +263,9 @@ static ssize_t set_max##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL; \
 \
 	mutex_lock(&data->update_lock); \
 \
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 00d975eb5b8..c7e6d8e8165 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -205,7 +205,6 @@ LTC4215_ALARM(curr1_max_alarm,	(1 << 2),	LTC4215_STATUS);
 
 /* Power (virtual) */
 LTC4215_POWER(power1_input);
-LTC4215_ALARM(power1_alarm,	(1 << 3),	LTC4215_STATUS);
 
 /* Input Voltage */
 LTC4215_VOLTAGE(in1_input,			LTC4215_ADIN);
@@ -214,6 +213,7 @@ LTC4215_ALARM(in1_min_alarm,	(1 << 1),	LTC4215_STATUS);
 
 /* Output Voltage */
 LTC4215_VOLTAGE(in2_input,			LTC4215_SOURCE);
+LTC4215_ALARM(in2_min_alarm,	(1 << 3),	LTC4215_STATUS);
 
 /* Finally, construct an array of pointers to members of the above objects,
  * as required for sysfs_create_group()
@@ -223,13 +223,13 @@ static struct attribute *ltc4215_attributes[] = {
 	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_power1_input.dev_attr.attr,
-	&sensor_dev_attr_power1_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
 	&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min_alarm.dev_attr.attr,
 
 	NULL,
 };
diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c
index 26762617867..4b50601027d 100644
--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -82,7 +82,7 @@ static struct ltc4261_data *ltc4261_update_device(struct device *dev)
 			val = i2c_smbus_read_byte_data(client, i);
 			if (unlikely(val < 0)) {
 				dev_dbg(dev,
-					"Failed to read ADC value: error %d",
+					"Failed to read ADC value: error %d\n",
 					val);
 				ret = ERR_PTR(val);
 				goto abort;
@@ -230,8 +230,7 @@ static int ltc4261_probe(struct i2c_client *client,
 		return -ENODEV;
 
 	if (i2c_smbus_read_byte_data(client, LTC4261_STATUS) < 0) {
-		dev_err(&client->dev, "Failed to read register %d:%02x:%02x\n",
-			adapter->id, client->addr, LTC4261_STATUS);
+		dev_err(&client->dev, "Failed to read status register\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index a0160ee5cae..9a11532ecae 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -2,7 +2,7 @@
  * max6650.c - Part of lm_sensors, Linux kernel modules for hardware
  *             monitoring.
  *
- * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
  *
  * based on code written by John Morris <john.morris@spirentcom.com>
  * Copyright (c) 2003 Spirent Communications
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 1d840aa8378..cdbc7448491 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -165,10 +165,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_VID_CTRL		0x6A
 
+#define W83795_REG_ALARM_CTRL		0x40
+#define ALARM_CTRL_RTSACS		(1 << 7)
 #define W83795_REG_ALARM(index)		(0x41 + (index))
+#define W83795_REG_CLR_CHASSIS		0x4D
 #define W83795_REG_BEEP(index)		(0x50 + (index))
 
-#define W83795_REG_CLR_CHASSIS		0x4D
+#define W83795_REG_OVT_CFG		0x58
+#define OVT_CFG_SEL			(1 << 7)
 
 
 #define W83795_REG_FCMS1		0x201
@@ -178,6 +182,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_TSS(index)		(0x209 + (index))
 
+#define TSS_MAP_RESERVED		0xff
+static const u8 tss_map[4][6] = {
+	{ 0,  1,  2,  3,  4,  5},
+	{ 6,  7,  8,  9,  0,  1},
+	{10, 11, 12, 13,  2,  3},
+	{ 4,  5,  4,  5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
 #define PWM_OUTPUT			0
 #define PWM_FREQ			1
 #define PWM_START			2
@@ -369,6 +381,7 @@ struct w83795_data {
 	u8 setup_pwm[3];	/* Register value */
 
 	u8 alarms[6];		/* Register value */
+	u8 enable_beep;
 	u8 beeps[6];		/* Register value */
 
 	char valid;
@@ -499,8 +512,11 @@ static void w83795_update_limits(struct i2c_client *client)
 	}
 
 	/* Read beep settings */
-	for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
-		data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+			data->beeps[i] =
+				w83795_read(client, W83795_REG_BEEP(i));
+	}
 
 	data->valid_limits = 1;
 }
@@ -577,6 +593,7 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct w83795_data *data = i2c_get_clientdata(client);
 	u16 tmp;
+	u8 intrusion;
 	int i;
 
 	mutex_lock(&data->update_lock);
@@ -648,9 +665,24 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 		    w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
 	}
 
-	/* update alarm */
+	/* Update intrusion and alarms
+	 * It is important to read intrusion first, because reading from
+	 * register SMI STS6 clears the interrupt status temporarily. */
+	tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+	/* Switch to interrupt status for intrusion if needed */
+	if (tmp & ALARM_CTRL_RTSACS)
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
+	intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+	/* Switch to real-time alarms */
+	w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
 	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
 		data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+	data->alarms[5] |= intrusion;
+	/* Restore original configuration if needed */
+	if (!(tmp & ALARM_CTRL_RTSACS))
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
 
 	data->last_updated = jiffies;
 	data->valid = 1;
@@ -730,6 +762,10 @@ store_chassis_clear(struct device *dev,
 	val = w83795_read(client, W83795_REG_CLR_CHASSIS);
 	val |= 0x80;
 	w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+	/* Clear status and force cache refresh */
+	w83795_read(client, W83795_REG_ALARM(5));
+	data->valid = 0;
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -857,20 +893,20 @@ show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
 	int index = sensor_attr->index;
 	u8 tmp;
 
-	if (1 == (data->pwm_fcms[0] & (1 << index))) {
+	/* Speed cruise mode */
+	if (data->pwm_fcms[0] & (1 << index)) {
 		tmp = 2;
 		goto out;
 	}
+	/* Thermal cruise or SmartFan IV mode */
 	for (tmp = 0; tmp < 6; tmp++) {
 		if (data->pwm_tfmr[tmp] & (1 << index)) {
 			tmp = 3;
 			goto out;
 		}
 	}
-	if (data->pwm_fomc & (1 << index))
-		tmp = 0;
-	else
-		tmp = 1;
+	/* Manual mode */
+	tmp = 1;
 
 out:
 	return sprintf(buf, "%u\n", tmp);
@@ -890,23 +926,21 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 
 	if (strict_strtoul(buf, 10, &val) < 0)
 		return -EINVAL;
-	if (val > 2)
+	if (val < 1 || val > 2)
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	switch (val) {
-	case 0:
 	case 1:
+		/* Clear speed cruise mode bits */
 		data->pwm_fcms[0] &= ~(1 << index);
 		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		/* Clear thermal cruise mode bits */
 		for (i = 0; i < 6; i++) {
 			data->pwm_tfmr[i] &= ~(1 << index);
 			w83795_write(client, W83795_REG_TFMR(i),
 				data->pwm_tfmr[i]);
 		}
-		data->pwm_fomc |= 1 << index;
-		data->pwm_fomc ^= val << index;
-		w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
 		break;
 	case 2:
 		data->pwm_fcms[0] |= (1 << index);
@@ -918,23 +952,60 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = to_sensor_dev_attr_2(attr)->index;
+	unsigned int mode;
+
+	if (data->pwm_fomc & (1 << index))
+		mode = 0;	/* DC */
+	else
+		mode = 1;	/* PWM */
+
+	return sprintf(buf, "%u\n", mode);
+}
+
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+	int useful = 0, i;
+
+	for (i = 0; i < 4; i++) {
+		if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+			continue;
+		if (tss_map[i][tsrc] < 6)	/* Analog */
+			useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+		else				/* Digital */
+			useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+	}
+
+	return useful;
+}
+
+static ssize_t
 show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	struct w83795_data *data = w83795_update_pwm_config(dev);
 	int index = sensor_attr->index;
-	u8 val = index / 2;
-	u8 tmp = data->temp_src[val];
+	u8 tmp = data->temp_src[index / 2];
 
 	if (index & 1)
-		val = 4;
+		tmp >>= 4;	/* Pick high nibble */
 	else
-		val = 0;
-	tmp >>= val;
-	tmp &= 0x0f;
+		tmp &= 0x0f;	/* Pick low nibble */
 
-	return sprintf(buf, "%u\n", tmp);
+	/* Look-up the actual temperature channel number */
+	if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+		return -EINVAL;		/* Shouldn't happen */
+
+	return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
 }
 
 static ssize_t
@@ -946,12 +1017,21 @@ store_temp_src(struct device *dev, struct device_attribute *attr,
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	int index = sensor_attr->index;
-	unsigned long tmp;
+	int tmp;
+	unsigned long channel;
 	u8 val = index / 2;
 
-	if (strict_strtoul(buf, 10, &tmp) < 0)
+	if (strict_strtoul(buf, 10, &channel) < 0 ||
+	    channel < 1 || channel > 14)
+		return -EINVAL;
+
+	/* Check if request can be fulfilled */
+	for (tmp = 0; tmp < 4; tmp++) {
+		if (tss_map[tmp][index] == channel - 1)
+			break;
+	}
+	if (tmp == 4)	/* No match */
 		return -EINVAL;
-	tmp = SENSORS_LIMIT(tmp, 0, 15);
 
 	mutex_lock(&data->update_lock);
 	if (index & 1) {
@@ -1515,7 +1595,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 
 #define NOT_USED			-1
 
-/* Don't change the attribute order, _max and _min are accessed by index
+/* Don't change the attribute order, _max, _min and _beep are accessed by index
  * somewhere else in the code */
 #define SENSOR_ATTR_IN(index) {						\
 	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
@@ -1530,6 +1610,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + ((index > 14) ? 1 : 0)) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_FAN(index) {					\
 	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
 		NULL, FAN_INPUT, index - 1), \
@@ -1553,9 +1635,13 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_pwm, store_pwm, PWM_FREQ, index - 1),	 \
 	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
 		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+	SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO,			\
+		show_pwm_mode, NULL, NOT_USED, index - 1),		\
 	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
 		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_DTS(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO ,		\
 		show_dts_mode, NULL, NOT_USED, index - 7),	\
@@ -1574,6 +1660,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_TEMP(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
 		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
@@ -1593,8 +1681,6 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + (index > 4 ? 11 : 17)),				\
-	SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO,	\
-		show_temp_src, store_temp_src, NOT_USED, index - 1),	\
 	SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,	\
 		show_temp_pwm_enable, store_temp_pwm_enable,		\
 		TEMP_PWM_ENABLE, index - 1),				\
@@ -1680,7 +1766,7 @@ static const struct sensor_device_attribute_2 w83795_fan[][4] = {
 	SENSOR_ATTR_FAN(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_temp[][29] = {
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
 	SENSOR_ATTR_TEMP(1),
 	SENSOR_ATTR_TEMP(2),
 	SENSOR_ATTR_TEMP(3),
@@ -1700,7 +1786,7 @@ static const struct sensor_device_attribute_2 w83795_dts[][8] = {
 	SENSOR_ATTR_DTS(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
 	SENSOR_ATTR_PWM(1),
 	SENSOR_ATTR_PWM(2),
 	SENSOR_ATTR_PWM(3),
@@ -1711,13 +1797,24 @@ static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
 	SENSOR_ATTR_PWM(8),
 };
 
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+	SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 0),
+	SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 1),
+	SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 2),
+	SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 3),
+	SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 4),
+	SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
 static const struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
 		      store_chassis_clear, ALARM_STATUS, 46),
-	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 46),
-	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 47),
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
 		store_fanin, FANIN_TOL, NOT_USED),
@@ -1730,6 +1827,13 @@ static const struct sensor_device_attribute_2 sda_single_files[] = {
 #endif
 };
 
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 46),
+	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 47),
+};
+
 /*
  * Driver interface
  */
@@ -1859,6 +1963,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_in & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+			if (j == 4 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_in[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1869,18 +1975,37 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_fan & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+			if (j == 3 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_fan[i][j].dev_attr);
 			if (err)
 				return err;
 		}
 	}
 
+	for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+		j = w83795_tss_useful(data, i);
+		if (!j)
+			continue;
+		err = fn(dev, &w83795_tss[i].dev_attr);
+		if (err)
+			return err;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
 		err = fn(dev, &sda_single_files[i].dev_attr);
 		if (err)
 			return err;
 	}
 
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+			err = fn(dev, &sda_beep_files[i].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	for (i = 0; i < data->has_pwm; i++) {
 		for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
@@ -1899,6 +2024,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 #else
 		for (j = 0; j < 8; j++) {
 #endif
+			if (j == 7 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_temp[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1910,6 +2037,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 			if (!(data->has_dts & (1 << i)))
 				continue;
 			for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+				if (j == 7 && !data->enable_beep)
+					continue;
 				err = fn(dev, &w83795_dts[i][j].dev_attr);
 				if (err)
 					return err;
@@ -2049,6 +2178,18 @@ static int w83795_probe(struct i2c_client *client,
 	else
 		data->has_pwm = 2;
 
+	/* Check if BEEP pin is available */
+	if (data->chip_type == w83795g) {
+		/* The W83795G has a dedicated BEEP pin */
+		data->enable_beep = 1;
+	} else {
+		/* The W83795ADG has a shared pin for OVT# and BEEP, so you
+		 * can't have both */
+		tmp = w83795_read(client, W83795_REG_OVT_CFG);
+		if ((tmp & OVT_CFG_SEL) == 0)
+			data->enable_beep = 1;
+	}
+
 	err = w83795_handle_files(dev, device_create_file);
 	if (err)
 		goto exit_remove;