Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 86 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-frodo.c b/drivers/i2c/busses/i2c-frodo.c
new file mode 100644
index 00000000000..e093829a0bf
--- /dev/null
+++ b/drivers/i2c/busses/i2c-frodo.c
@@ -0,0 +1,86 @@
+
+/*
+ * linux/drivers/i2c/i2c-frodo.c
+ *
+ * Author: Abraham van der Merwe <abraham@2d3d.co.za>
+ *
+ * An I2C adapter driver for the 2d3D, Inc. StrongARM SA-1110
+ * Development board (Frodo).
+ *
+ * This source code is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/hardware.h>
+
+
+static void frodo_setsda (void *data,int state)
+{
+	if (state)
+		FRODO_CPLD_I2C |= FRODO_I2C_SDA_OUT;
+	else
+		FRODO_CPLD_I2C &= ~FRODO_I2C_SDA_OUT;
+}
+
+static void frodo_setscl (void *data,int state)
+{
+	if (state)
+		FRODO_CPLD_I2C |= FRODO_I2C_SCL_OUT;
+	else
+		FRODO_CPLD_I2C &= ~FRODO_I2C_SCL_OUT;
+}
+
+static int frodo_getsda (void *data)
+{
+	return ((FRODO_CPLD_I2C & FRODO_I2C_SDA_IN) != 0);
+}
+
+static int frodo_getscl (void *data)
+{
+	return ((FRODO_CPLD_I2C & FRODO_I2C_SCL_IN) != 0);
+}
+
+static struct i2c_algo_bit_data bit_frodo_data = {
+	.setsda		= frodo_setsda,
+	.setscl		= frodo_setscl,
+	.getsda		= frodo_getsda,
+	.getscl		= frodo_getscl,
+	.udelay		= 80,
+	.mdelay		= 80,
+	.timeout	= HZ
+};
+
+static struct i2c_adapter frodo_ops = {
+	.owner			= THIS_MODULE,
+	.id			= I2C_HW_B_FRODO,
+	.algo_data		= &bit_frodo_data,
+	.dev			= {
+		.name		= "Frodo adapter driver",
+	},
+};
+
+static int __init i2c_frodo_init (void)
+{
+	return i2c_bit_add_bus(&frodo_ops);
+}
+
+static void __exit i2c_frodo_exit (void)
+{
+	i2c_bit_del_bus(&frodo_ops);
+}
+
+MODULE_AUTHOR ("Abraham van der Merwe <abraham@2d3d.co.za>");
+MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo");
+MODULE_LICENSE ("GPL");
+
+module_init (i2c_frodo_init);
+module_exit (i2c_frodo_exit);
+