i2c: Remove 3 deprecated bus drivers

This patch contains the scheduled removal of i2c-i810, i2c-prosavage
and i2c-savage4.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 0 insertions, 325 deletions

diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
deleted file mode 100644
index 07c1f1e27df..00000000000
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- *    kernel/busses/i2c-prosavage.c
- *
- *    i2c bus driver for S3/VIA 8365/8375 graphics processor.
- *    Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org>
- *    Based on code written by:
- *	Frodo Looijaard <frodol@dds.nl>,
- *	Philip Edelbrock <phil@netroedge.com>,
- *	Ralph Metzler <rjkm@thp.uni-koeln.de>, and
- *	Mark D. Studebaker <mdsxyz123@yahoo.com>
- *	Simon Vogl
- *	and others
- *
- *    Please read the lm_sensors documentation for details on use.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-/*  18-05-2003 HVE - created
- *  14-06-2003 HVE - adapted for lm_sensors2
- *  17-06-2003 HVE - linux 2.5.xx compatible
- *  18-06-2003 HVE - codingstyle
- *  21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
- *		     codingstyle, mmio enabled
- *
- *  This driver interfaces to the I2C bus of the VIA north bridge embedded
- *  ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
- *
- *  Graphics cores:
- *   S3/VIA KM266/VT8375 aka ProSavage8
- *   S3/VIA KM133/VT8365 aka Savage4
- *
- *  Two serial busses are implemented:
- *   SERIAL1 - I2C serial communications interface
- *   SERIAL2 - DDC2 monitor communications interface
- *
- *  Tested on a FX41 mainboard, see http://www.shuttle.com
- * 
- *
- *  TODO:
- *  - integration with prosavage framebuffer device
- *    (Additional documentation needed :(
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/*
- * driver configuration
- */
-#define MAX_BUSSES	2
-
-struct s_i2c_bus {
-	void __iomem *mmvga;
-	int	i2c_reg;
-	int	adap_ok;
-	struct i2c_adapter		adap;
-	struct i2c_algo_bit_data	algo;
-};
-
-struct s_i2c_chip {
-	void __iomem *mmio;
-	struct s_i2c_bus	i2c_bus[MAX_BUSSES];
-};
-
-
-/*
- * i2c configuration
- */
-#define CYCLE_DELAY	10
-#define TIMEOUT		(HZ / 2)
-
-
-/* 
- * S3/VIA 8365/8375 registers
- */
-#define VGA_CR_IX	0x3d4
-#define VGA_CR_DATA	0x3d5
-
-#define CR_SERIAL1	0xa0	/* I2C serial communications interface */
-#define MM_SERIAL1	0xff20
-#define CR_SERIAL2	0xb1	/* DDC2 monitor communications interface */
-
-/* based on vt8365 documentation */
-#define I2C_ENAB	0x10
-#define I2C_SCL_OUT	0x01
-#define I2C_SDA_OUT	0x02
-#define I2C_SCL_IN	0x04
-#define I2C_SDA_IN	0x08
-
-#define SET_CR_IX(p, val)	writeb((val), (p)->mmvga + VGA_CR_IX)
-#define SET_CR_DATA(p, val)	writeb((val), (p)->mmvga + VGA_CR_DATA)
-#define GET_CR_DATA(p)		readb((p)->mmvga + VGA_CR_DATA)
-
-
-/*
- * Serial bus line handling
- *
- * serial communications register as parameter in private data
- *
- * TODO: locks with other code sections accessing video registers?
- */
-static void bit_s3via_setscl(void *bus, int val)
-{
-	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-	unsigned int r;
-
-	SET_CR_IX(p, p->i2c_reg);
-	r = GET_CR_DATA(p);
-	r |= I2C_ENAB;
-	if (val) {
-		r |= I2C_SCL_OUT;
-	} else {
-		r &= ~I2C_SCL_OUT;
-	}
-	SET_CR_DATA(p, r);
-}
-
-static void bit_s3via_setsda(void *bus, int val)
-{
-	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-	unsigned int r;
-	
-	SET_CR_IX(p, p->i2c_reg);
-	r = GET_CR_DATA(p);
-	r |= I2C_ENAB;
-	if (val) {
-		r |= I2C_SDA_OUT;
-	} else {
-		r &= ~I2C_SDA_OUT;
-	}
-	SET_CR_DATA(p, r);
-}
-
-static int bit_s3via_getscl(void *bus)
-{
-	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
-	SET_CR_IX(p, p->i2c_reg);
-	return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
-}
-
-static int bit_s3via_getsda(void *bus)
-{
-	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
-
-	SET_CR_IX(p, p->i2c_reg);
-	return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
-}
-
-
-/*
- * adapter initialisation
- */
-static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg)
-{
-	int ret;
-	p->adap.owner	  = THIS_MODULE;
-	p->adap.id	  = I2C_HW_B_S3VIA;
-	p->adap.algo_data = &p->algo;
-	p->adap.dev.parent = &dev->dev;
-	p->algo.setsda	  = bit_s3via_setsda;
-	p->algo.setscl	  = bit_s3via_setscl;
-	p->algo.getsda	  = bit_s3via_getsda;
-	p->algo.getscl	  = bit_s3via_getscl;
-	p->algo.udelay	  = CYCLE_DELAY;
-	p->algo.timeout	  = TIMEOUT;
-	p->algo.data	  = p;
-	p->mmvga	  = mmvga;
-	p->i2c_reg	  = i2c_reg;
-    
-	ret = i2c_bit_add_bus(&p->adap);
-	if (ret) {
-		return ret;
-	}
-
-	p->adap_ok = 1;
-	return 0;
-}
-
-
-/*
- * Cleanup stuff
- */
-static void prosavage_remove(struct pci_dev *dev)
-{
-	struct s_i2c_chip *chip;
-	int i, ret;
-
-	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
-
-	if (!chip) {
-		return;
-	}
-	for (i = MAX_BUSSES - 1; i >= 0; i--) {
-		if (chip->i2c_bus[i].adap_ok == 0)
-			continue;
-
-		ret = i2c_del_adapter(&chip->i2c_bus[i].adap);
-	        if (ret) {
-			dev_err(&dev->dev, "%s not removed\n",
-				chip->i2c_bus[i].adap.name);
-		}
-	}
-	if (chip->mmio) {
-		iounmap(chip->mmio);
-	}
-	kfree(chip);
-}
-
-
-/*
- * Detect chip and initialize it
- */
-static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	int ret;
-	unsigned long base, len;
-	struct s_i2c_chip *chip;
-	struct s_i2c_bus  *bus;
-
-	pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
-	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
-	if (chip == NULL) {
-		return -ENOMEM;
-	}
-
-	base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
-	len  = dev->resource[0].end - base + 1;
-	chip->mmio = ioremap_nocache(base, len);
-
-	if (chip->mmio == NULL) {
-		dev_err(&dev->dev, "ioremap failed\n");
-		prosavage_remove(dev);
-		return -ENODEV;
-	}
-
-
-	/*
-	 * Chip initialisation
-	 */
-	/* Unlock Extended IO Space ??? */
-
-
-	/*
-	 * i2c bus registration
-	 */
-	bus = &chip->i2c_bus[0];
-	snprintf(bus->adap.name, sizeof(bus->adap.name),
-		"ProSavage I2C bus at %02x:%02x.%x",
-		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1);
-	if (ret) {
-		goto err_adap;
-	}
-	/*
-	 * ddc bus registration
-	 */
-	bus = &chip->i2c_bus[1];
-	snprintf(bus->adap.name, sizeof(bus->adap.name),
-		"ProSavage DDC bus at %02x:%02x.%x",
-		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2);
-	if (ret) {
-		goto err_adap;
-	}
-	return 0;
-err_adap:
-	dev_err(&dev->dev, "%s failed\n", bus->adap.name);
-	prosavage_remove(dev);
-	return ret;
-}
-
-
-/*
- * Data for PCI driver interface
- */
-static struct pci_device_id prosavage_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) },
-	{ 0, },
-};
-
-MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
-
-static struct pci_driver prosavage_driver = {
-	.name		=	"prosavage_smbus",
-	.id_table	=	prosavage_pci_tbl,
-	.probe		=	prosavage_probe,
-	.remove		=	prosavage_remove,
-};
-
-static int __init i2c_prosavage_init(void)
-{
-	return pci_register_driver(&prosavage_driver);
-}
-
-static void __exit i2c_prosavage_exit(void)
-{
-	pci_unregister_driver(&prosavage_driver);
-}
-
-MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
-MODULE_AUTHOR("Henk Vergonet");
-MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
-MODULE_LICENSE("GPL");
-
-module_init (i2c_prosavage_init);
-module_exit (i2c_prosavage_exit);