Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull i2c-embedded changes from Wolfram Sang:
 "The changes for i2c-embedded include:

   - massive rework of the omap driver
   - massive rework of the at91 driver.  In fact, the old driver gets
     removed; I am okay with this approach since the old driver was
     depending on BROKEN and its limitations made it practically
     unusable, so people used bitbanging instead.  But even if there are
     users, there is no platform_data or module parameter which would
     need to be converted.  It is just another driver doing I2C
     transfers, just way better.  Modifications of arch/arm/at91 related
     files have proper acks from the maintainer.
   - new driver for R-Car I2C
   - devicetree and generic_clock conversions and fixes
   - usual driver fixes and changes.

  The rework patches have come a long way and lots of people have been
  involved in creating/testing them.  Most patches have been in
  linux-next at least since 3.6-rc5.  A few have been added in the last
  week, I have to admit.

  An unexpected (but welcome :)) peak in private life is the cause for
  that.  The "late" patches shouldn't cause any merge conflicts and I
  will have a special eye on them during the stabilization phase.  This
  is an exception and I want to have the patches in place properly in
  time again for the next kernels."

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits)
  MXS: Implement DMA support into mxs-i2c
  i2c: add Renesas R-Car I2C driver
  i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare
  ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints
  i2c: nomadik: Add Device Tree support to the Nomadik I2C driver
  i2c: algo: pca: Fix chip reset function for PCA9665
  i2c: mpc: Wait for STOP to hit the bus
  i2c: davinci: preparation for switch to common clock framework
  omap-i2c: fix incorrect log message when using a device tree
  i2c: omap: sanitize exit path
  i2c: omap: switch over to autosuspend API
  i2c: omap: remove unnecessary pm_runtime_suspended check
  i2c: omap: switch to threaded IRQ support
  i2c: omap: remove redundant status read
  i2c: omap: get rid of the "complete" label
  i2c: omap: resize fifos before each message
  i2c: omap: simplify IRQ exit path
  i2c: omap: always return IRQ_HANDLED
  i2c: omap: simplify errata check
  i2c: omap: bus: add a receiver flag
  ...

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 4d07dea9bca..3e0335f1fc6 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -601,14 +601,14 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
 	int ret;
 
 	pm_runtime_get_sync(&adap->dev);
-	clk_enable(i2c->clk);
+	clk_prepare_enable(i2c->clk);
 
 	for (retry = 0; retry < adap->retries; retry++) {
 
 		ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
 
 		if (ret != -EAGAIN) {
-			clk_disable(i2c->clk);
+			clk_disable_unprepare(i2c->clk);
 			pm_runtime_put(&adap->dev);
 			return ret;
 		}
@@ -618,7 +618,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
 		udelay(100);
 	}
 
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 	pm_runtime_put(&adap->dev);
 	return -EREMOTEIO;
 }
@@ -977,7 +977,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
 
-	clk_enable(i2c->clk);
+	clk_prepare_enable(i2c->clk);
 
 	/* map the registers */
 
@@ -1065,7 +1065,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	pm_runtime_enable(&i2c->adap.dev);
 
 	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 	return 0;
 
  err_cpufreq:
@@ -1082,7 +1082,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	kfree(i2c->ioarea);
 
  err_clk:
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 	clk_put(i2c->clk);
 
  err_noclk:
@@ -1106,7 +1106,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&i2c->adap);
 	free_irq(i2c->irq, i2c);
 
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 	clk_put(i2c->clk);
 
 	iounmap(i2c->regs);
@@ -1135,9 +1135,9 @@ static int s3c24xx_i2c_resume(struct device *dev)
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 
 	i2c->suspended = 0;
-	clk_enable(i2c->clk);
+	clk_prepare_enable(i2c->clk);
 	s3c24xx_i2c_init(i2c);
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 
 	return 0;
 }