Merge branch 'merge'

4 files changed, 24 insertions, 19 deletions

diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index aca7e166860..48c56939c86 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -21,6 +21,9 @@
  * - Make it work with IXP46x chips
  * - Cleanup function names, coding style, etc
  *
+ * - writing to slave address causes latchup on iop331.
+ *	fix: driver refuses to address self.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, version 2.
@@ -73,12 +76,6 @@ iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
 } 
 
 static void 
-iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
-{
-	__raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
-}
-
-static void 
 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
 	u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
@@ -248,6 +245,13 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
 	int status;
 	int rc;
 
+	/* avoid writing to my slave address (hangs on 80331),
+	 * forbidden in Intel developer manual
+	 */
+	if (msg->addr == MYSAR) {
+		return -EBUSY;
+	}
+
 	__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
 	
 	cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
@@ -498,7 +502,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	spin_lock_init(&adapter_data->lock);
 
 	iop3xx_i2c_reset(adapter_data);
-	iop3xx_i2c_set_slave_addr(adapter_data);
 	iop3xx_i2c_enable(adapter_data);
 
 	platform_set_drvdata(pdev, new_adapter);
diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h
index e46ebaea7b1..8485861f6a3 100644
--- a/drivers/i2c/busses/i2c-iop3xx.h
+++ b/drivers/i2c/busses/i2c-iop3xx.h
@@ -80,7 +80,7 @@
 #define IOP3XX_GPOD_I2C0	0x00c0	/* clear these bits to enable ch0 */
 #define IOP3XX_GPOD_I2C1	0x0030	/* clear these bits to enable ch1 */
 
-#define MYSAR			0x02	/* SWAG a suitable slave address */
+#define MYSAR			0	/* default slave address */
 
 #define I2C_ERR			321
 #define I2C_ERR_BERR		(I2C_ERR+0)
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index e8a6de5a151..d658d910795 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -148,8 +148,6 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 	int			read;
 	int			addrdir;
 
-	if (num != 1)
-		return -EINVAL;
 	if (msgs->flags & I2C_M_TEN)
 		return -EINVAL;
 	read = (msgs->flags & I2C_M_RD) != 0;
@@ -166,7 +164,7 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
  bail:
 	pmac_i2c_close(bus);
-	return rc < 0 ? rc : msgs->len;
+	return rc < 0 ? rc : 1;
 }
 
 static u32 i2c_powermac_func(struct i2c_adapter * adapter)
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 22a3eda0416..ced309ff056 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -184,21 +184,21 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
 		break;
 
 	case state_read:
-		/* Set ACK if receiving the last byte */
-		if (iface->len == 1)
+		/* Set ACK if _next_ byte will be the last one */
+		if (iface->len == 2)
 			outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
 		else
 			outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
 
-		*iface->ptr++ = inb(ACBSDA);
-		--iface->len;
-
-		if (iface->len == 0) {
+		if (iface->len == 1) {
 			iface->result = 0;
 			iface->state = state_idle;
 			outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
 		}
 
+		*iface->ptr++ = inb(ACBSDA);
+		--iface->len;
+
 		break;
 
 	case state_write:
@@ -307,8 +307,12 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
 		buffer = (u8 *)&cur_word;
 		break;
 
-	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (rw == I2C_SMBUS_READ)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
 		len = data->block[0];
+		if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EINVAL;
 		buffer = &data->block[1];
 		break;
 
@@ -372,7 +376,7 @@ static u32 scx200_acb_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
+	       I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 /* For now, we only handle combined mode (smbus) */