Merge branch 'master' into next

Conflicts:
	fs/namei.c

Manually merged per:

diff --cc fs/namei.c
index 734f2b5,bbc15c2..0000000
--- a/fs/namei.c
+++ b/fs/namei.c
@@@ -860,9 -848,8 +849,10 @@@ static int __link_path_walk(const char
  		nd->flags |= LOOKUP_CONTINUE;
  		err = exec_permission_lite(inode);
  		if (err == -EAGAIN)
- 			err = vfs_permission(nd, MAY_EXEC);
+ 			err = inode_permission(nd->path.dentry->d_inode,
+ 					       MAY_EXEC);
 +		if (!err)
 +			err = ima_path_check(&nd->path, MAY_EXEC);
   		if (err)
  			break;

@@@ -1525,14 -1506,9 +1509,14 @@@ int may_open(struct path *path, int acc
  		flag &= ~O_TRUNC;
  	}

- 	error = vfs_permission(nd, acc_mode);
+ 	error = inode_permission(inode, acc_mode);
  	if (error)
  		return error;
 +
- 	error = ima_path_check(&nd->path,
++	error = ima_path_check(path,
 +			       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
 +	if (error)
 +		return error;
  	/*
  	 * An append-only file must be opened in append mode for writing.
  	 */

Signed-off-by: James Morris <jmorris@namei.org>

1 files changed, 0 insertions, 83 deletions

diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 4c35702830c..c80312c1f38 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,43 +16,6 @@ config DS1682
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
-config AT24
-	tristate "EEPROMs from most vendors"
-	depends on SYSFS && EXPERIMENTAL
-	help
-	  Enable this driver to get read/write support to most I2C EEPROMs,
-	  after you configure the driver to know about each EEPROM on
-	  your target board.  Use these generic chip names, instead of
-	  vendor-specific ones like at24c64 or 24lc02:
-
-	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
-	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
-	  Unless you like data loss puzzles, always be sure that any chip
-	  you configure as a 24c32 (32 kbit) or larger is NOT really a
-	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
-	  as read-only won't help recover from this. Also, if your chip
-	  has any software write-protect mechanism you may want to review the
-	  code to make sure this driver won't turn it on by accident.
-
-	  If you use this with an SMBus adapter instead of an I2C adapter,
-	  full functionality is not available.  Only smaller devices are
-	  supported (24c16 and below, max 4 kByte).
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called at24.
-
-config SENSORS_EEPROM
-	tristate "EEPROM reader"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get read-only access to the EEPROM data
-	  available on modern memory DIMMs and Sony Vaio laptops.  Such
-	  EEPROMs could theoretically be available on other devices as well.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called eeprom.
-
 config SENSORS_PCF8574
 	tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
 	depends on EXPERIMENTAL && GPIO_PCF857X = "n"
@@ -114,31 +77,6 @@ config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
-config ISP1301_OMAP
-	tristate "Philips ISP1301 with OMAP OTG"
-	depends on ARCH_OMAP_OTG
-	help
-	  If you say yes here you get support for the Philips ISP1301
-	  USB-On-The-Go transceiver working with the OMAP OTG controller.
-	  The ISP1301 is used in products including H2 and H3 development
-	  boards for Texas Instruments OMAP processors.
-	  
-	  This driver can also be built as a module.  If so, the module
-	  will be called isp1301_omap.
-
-config TPS65010
-	tristate "TPS6501x Power Management chips"
-	depends on GPIOLIB
-	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
-	help
-	  If you say yes here you get support for the TPS6501x series of
-	  Power Management chips.  These include voltage regulators,
-	  lithium ion/polymer battery charging, and other features that
-	  are often used in portable devices like cell phones and cameras.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called tps65010.
-
 config SENSORS_MAX6875
 	tristate "Maxim MAX6875 Power supply supervisor"
 	depends on EXPERIMENTAL
@@ -164,25 +102,4 @@ config SENSORS_TSL2550
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.
 
-config MENELAUS
-	bool "TWL92330/Menelaus PM chip"
-	depends on I2C=y && ARCH_OMAP24XX
-	help
-	  If you say yes here you get support for the Texas Instruments
-	  TWL92330/Menelaus Power Management chip. This include voltage
-	  regulators, Dual slot memory card tranceivers, real-time clock
-	  and other features that are often used in portable devices like
-	  cell phones and PDAs.
-
-config MCU_MPC8349EMITX
-	tristate "MPC8349E-mITX MCU driver"
-	depends on I2C && PPC_83xx
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Say Y here to enable soft power-off functionality on the Freescale
-	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
-	  also register MCU GPIOs with the generic GPIO API, so you'll able
-	  to use MCU pins as GPIOs.
-
 endmenu