Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/usb/r8152.c
	net/netfilter/nfnetlink.c

Both r8152 and nfnetlink conflicts were simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 files changed, 420 insertions, 391 deletions

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index e0228b22825..1722f50f247 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -2,11 +2,8 @@
 # Makefile for the i2c core.
 #
 
-i2ccore-y := i2c-core.o
-i2ccore-$(CONFIG_ACPI)	 	+= i2c-acpi.o
-
 obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
-obj-$(CONFIG_I2C)		+= i2ccore.o
+obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
 obj-$(CONFIG_I2C_MUX)		+= i2c-mux.o
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 984492553e9..d9ee43c80cd 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -497,7 +497,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 			desc->wr_len_cmd = dma_size;
 			desc->control |= ISMT_DESC_BLK;
 			priv->dma_buffer[0] = command;
-			memcpy(&priv->dma_buffer[1], &data->block[1], dma_size);
+			memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
 		} else {
 			/* Block Read */
 			dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA:  READ\n");
@@ -525,7 +525,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 			desc->wr_len_cmd = dma_size;
 			desc->control |= ISMT_DESC_I2C;
 			priv->dma_buffer[0] = command;
-			memcpy(&priv->dma_buffer[1], &data->block[1], dma_size);
+			memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
 		} else {
 			/* i2c Block Read */
 			dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:  READ\n");
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 7170fc89282..65a21fed08b 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -429,7 +429,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
 		ret = mxs_i2c_pio_wait_xfer_end(i2c);
 		if (ret) {
 			dev_err(i2c->dev,
-				"PIO: Failed to send SELECT command!\n");
+				"PIO: Failed to send READ command!\n");
 			goto cleanup;
 		}
 
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 1cc146cfc1f..e506fcd3ca0 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -76,8 +76,8 @@
 #define RCAR_IRQ_RECV	(MNR | MAL | MST | MAT | MDR)
 #define RCAR_IRQ_STOP	(MST)
 
-#define RCAR_IRQ_ACK_SEND	(~(MAT | MDE))
-#define RCAR_IRQ_ACK_RECV	(~(MAT | MDR))
+#define RCAR_IRQ_ACK_SEND	(~(MAT | MDE) & 0xFF)
+#define RCAR_IRQ_ACK_RECV	(~(MAT | MDR) & 0xFF)
 
 #define ID_LAST_MSG	(1 << 0)
 #define ID_IOERROR	(1 << 1)
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index e637c32ae51..93cfc837200 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -433,12 +433,11 @@ static void rk3x_i2c_set_scl_rate(struct rk3x_i2c *i2c, unsigned long scl_rate)
 	unsigned long i2c_rate = clk_get_rate(i2c->clk);
 	unsigned int div;
 
-	/* SCL rate = (clk rate) / (8 * DIV) */
-	div = DIV_ROUND_UP(i2c_rate, scl_rate * 8);
-
-	/* The lower and upper half of the CLKDIV reg describe the length of
-	 * SCL low & high periods. */
-	div = DIV_ROUND_UP(div, 2);
+	/* set DIV = DIVH = DIVL
+	 * SCL rate = (clk rate) / (8 * (DIVH + 1 + DIVL + 1))
+	 *          = (clk rate) / (16 * (DIV + 1))
+	 */
+	div = DIV_ROUND_UP(i2c_rate, scl_rate * 16) - 1;
 
 	i2c_writel(i2c, (div << 16) | (div & 0xffff), REG_CLKDIV);
 }
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 87d0371cebb..efba1ebe16b 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -380,34 +380,33 @@ static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev)
 {
 	int ret;
 	if (!i2c_dev->hw->has_single_clk_source) {
-		ret = clk_prepare_enable(i2c_dev->fast_clk);
+		ret = clk_enable(i2c_dev->fast_clk);
 		if (ret < 0) {
 			dev_err(i2c_dev->dev,
 				"Enabling fast clk failed, err %d\n", ret);
 			return ret;
 		}
 	}
-	ret = clk_prepare_enable(i2c_dev->div_clk);
+	ret = clk_enable(i2c_dev->div_clk);
 	if (ret < 0) {
 		dev_err(i2c_dev->dev,
 			"Enabling div clk failed, err %d\n", ret);
-		clk_disable_unprepare(i2c_dev->fast_clk);
+		clk_disable(i2c_dev->fast_clk);
 	}
 	return ret;
 }
 
 static inline void tegra_i2c_clock_disable(struct tegra_i2c_dev *i2c_dev)
 {
-	clk_disable_unprepare(i2c_dev->div_clk);
+	clk_disable(i2c_dev->div_clk);
 	if (!i2c_dev->hw->has_single_clk_source)
-		clk_disable_unprepare(i2c_dev->fast_clk);
+		clk_disable(i2c_dev->fast_clk);
 }
 
 static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 {
 	u32 val;
 	int err = 0;
-	int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
 	u32 clk_divisor;
 
 	err = tegra_i2c_clock_enable(i2c_dev);
@@ -428,9 +427,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	i2c_writel(i2c_dev, val, I2C_CNFG);
 	i2c_writel(i2c_dev, 0, I2C_INT_MASK);
 
-	clk_multiplier *= (i2c_dev->hw->clk_divisor_std_fast_mode + 1);
-	clk_set_rate(i2c_dev->div_clk, i2c_dev->bus_clk_rate * clk_multiplier);
-
 	/* Make sure clock divisor programmed correctly */
 	clk_divisor = i2c_dev->hw->clk_divisor_hs_mode;
 	clk_divisor |= i2c_dev->hw->clk_divisor_std_fast_mode <<
@@ -712,6 +708,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	void __iomem *base;
 	int irq;
 	int ret = 0;
+	int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -777,17 +774,39 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, i2c_dev);
 
+	if (!i2c_dev->hw->has_single_clk_source) {
+		ret = clk_prepare(i2c_dev->fast_clk);
+		if (ret < 0) {
+			dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+			return ret;
+		}
+	}
+
+	clk_multiplier *= (i2c_dev->hw->clk_divisor_std_fast_mode + 1);
+	ret = clk_set_rate(i2c_dev->div_clk,
+			   i2c_dev->bus_clk_rate * clk_multiplier);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Clock rate change failed %d\n", ret);
+		goto unprepare_fast_clk;
+	}
+
+	ret = clk_prepare(i2c_dev->div_clk);
+	if (ret < 0) {
+		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+		goto unprepare_fast_clk;
+	}
+
 	ret = tegra_i2c_init(i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize i2c controller");
-		return ret;
+		goto unprepare_div_clk;
 	}
 
 	ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
 			tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
-		return ret;
+		goto unprepare_div_clk;
 	}
 
 	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
@@ -803,16 +822,30 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add I2C adapter\n");
-		return ret;
+		goto unprepare_div_clk;
 	}
 
 	return 0;
+
+unprepare_div_clk:
+	clk_unprepare(i2c_dev->div_clk);
+
+unprepare_fast_clk:
+	if (!i2c_dev->hw->has_single_clk_source)
+		clk_unprepare(i2c_dev->fast_clk);
+
+	return ret;
 }
 
 static int tegra_i2c_remove(struct platform_device *pdev)
 {
 	struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 	i2c_del_adapter(&i2c_dev->adapter);
+
+	clk_unprepare(i2c_dev->div_clk);
+	if (!i2c_dev->hw->has_single_clk_source)
+		clk_unprepare(i2c_dev->fast_clk);
+
 	return 0;
 }
 
diff --git a/drivers/i2c/i2c-acpi.c b/drivers/i2c/i2c-acpi.c
deleted file mode 100644
index 0dbc18c15c4..00000000000
--- a/drivers/i2c/i2c-acpi.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * I2C ACPI code
- *
- * Copyright (C) 2014 Intel Corp
- *
- * Author: Lan Tianyu <tianyu.lan@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-#define pr_fmt(fmt) "I2C/ACPI : " fmt
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/acpi.h>
-
-struct acpi_i2c_handler_data {
-	struct acpi_connection_info info;
-	struct i2c_adapter *adapter;
-};
-
-struct gsb_buffer {
-	u8	status;
-	u8	len;
-	union {
-		u16	wdata;
-		u8	bdata;
-		u8	data[0];
-	};
-} __packed;
-
-static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
-{
-	struct i2c_board_info *info = data;
-
-	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		struct acpi_resource_i2c_serialbus *sb;
-
-		sb = &ares->data.i2c_serial_bus;
-		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
-			info->addr = sb->slave_address;
-			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
-				info->flags |= I2C_CLIENT_TEN;
-		}
-	} else if (info->irq < 0) {
-		struct resource r;
-
-		if (acpi_dev_resource_interrupt(ares, 0, &r))
-			info->irq = r.start;
-	}
-
-	/* Tell the ACPI core to skip this resource */
-	return 1;
-}
-
-static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
-				       void *data, void **return_value)
-{
-	struct i2c_adapter *adapter = data;
-	struct list_head resource_list;
-	struct i2c_board_info info;
-	struct acpi_device *adev;
-	int ret;
-
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
-	if (acpi_bus_get_status(adev) || !adev->status.present)
-		return AE_OK;
-
-	memset(&info, 0, sizeof(info));
-	info.acpi_node.companion = adev;
-	info.irq = -1;
-
-	INIT_LIST_HEAD(&resource_list);
-	ret = acpi_dev_get_resources(adev, &resource_list,
-				     acpi_i2c_add_resource, &info);
-	acpi_dev_free_resource_list(&resource_list);
-
-	if (ret < 0 || !info.addr)
-		return AE_OK;
-
-	adev->power.flags.ignore_parent = true;
-	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
-	if (!i2c_new_device(adapter, &info)) {
-		adev->power.flags.ignore_parent = false;
-		dev_err(&adapter->dev,
-			"failed to add I2C device %s from ACPI\n",
-			dev_name(&adev->dev));
-	}
-
-	return AE_OK;
-}
-
-/**
- * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
- * @adap: pointer to adapter
- *
- * Enumerate all I2C slave devices behind this adapter by walking the ACPI
- * namespace. When a device is found it will be added to the Linux device
- * model and bound to the corresponding ACPI handle.
- */
-void acpi_i2c_register_devices(struct i2c_adapter *adap)
-{
-	acpi_handle handle;
-	acpi_status status;
-
-	if (!adap->dev.parent)
-		return;
-
-	handle = ACPI_HANDLE(adap->dev.parent);
-	if (!handle)
-		return;
-
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
-				     acpi_i2c_add_device, NULL,
-				     adap, NULL);
-	if (ACPI_FAILURE(status))
-		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
-}
-
-#ifdef CONFIG_ACPI_I2C_OPREGION
-static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
-		u8 cmd, u8 *data, u8 data_len)
-{
-
-	struct i2c_msg msgs[2];
-	int ret;
-	u8 *buffer;
-
-	buffer = kzalloc(data_len, GFP_KERNEL);
-	if (!buffer)
-		return AE_NO_MEMORY;
-
-	msgs[0].addr = client->addr;
-	msgs[0].flags = client->flags;
-	msgs[0].len = 1;
-	msgs[0].buf = &cmd;
-
-	msgs[1].addr = client->addr;
-	msgs[1].flags = client->flags | I2C_M_RD;
-	msgs[1].len = data_len;
-	msgs[1].buf = buffer;
-
-	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (ret < 0)
-		dev_err(&client->adapter->dev, "i2c read failed\n");
-	else
-		memcpy(data, buffer, data_len);
-
-	kfree(buffer);
-	return ret;
-}
-
-static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
-		u8 cmd, u8 *data, u8 data_len)
-{
-
-	struct i2c_msg msgs[1];
-	u8 *buffer;
-	int ret = AE_OK;
-
-	buffer = kzalloc(data_len + 1, GFP_KERNEL);
-	if (!buffer)
-		return AE_NO_MEMORY;
-
-	buffer[0] = cmd;
-	memcpy(buffer + 1, data, data_len);
-
-	msgs[0].addr = client->addr;
-	msgs[0].flags = client->flags;
-	msgs[0].len = data_len + 1;
-	msgs[0].buf = buffer;
-
-	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (ret < 0)
-		dev_err(&client->adapter->dev, "i2c write failed\n");
-
-	kfree(buffer);
-	return ret;
-}
-
-static acpi_status
-acpi_i2c_space_handler(u32 function, acpi_physical_address command,
-			u32 bits, u64 *value64,
-			void *handler_context, void *region_context)
-{
-	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
-	struct acpi_i2c_handler_data *data = handler_context;
-	struct acpi_connection_info *info = &data->info;
-	struct acpi_resource_i2c_serialbus *sb;
-	struct i2c_adapter *adapter = data->adapter;
-	struct i2c_client client;
-	struct acpi_resource *ares;
-	u32 accessor_type = function >> 16;
-	u8 action = function & ACPI_IO_MASK;
-	acpi_status ret = AE_OK;
-	int status;
-
-	ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
-	if (ACPI_FAILURE(ret))
-		return ret;
-
-	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	sb = &ares->data.i2c_serial_bus;
-	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	memset(&client, 0, sizeof(client));
-	client.adapter = adapter;
-	client.addr = sb->slave_address;
-	client.flags = 0;
-
-	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
-		client.flags |= I2C_CLIENT_TEN;
-
-	switch (accessor_type) {
-	case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_byte(&client);
-			if (status >= 0) {
-				gsb->bdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_byte(&client, gsb->bdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_BYTE:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_byte_data(&client, command);
-			if (status >= 0) {
-				gsb->bdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_byte_data(&client, command,
-					gsb->bdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_WORD:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_word_data(&client, command);
-			if (status >= 0) {
-				gsb->wdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_word_data(&client, command,
-					gsb->wdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_block_data(&client, command,
-					gsb->data);
-			if (status >= 0) {
-				gsb->len = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_block_data(&client, command,
-					gsb->len, gsb->data);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
-		if (action == ACPI_READ) {
-			status = acpi_gsb_i2c_read_bytes(&client, command,
-					gsb->data, info->access_length);
-			if (status > 0)
-				status = 0;
-		} else {
-			status = acpi_gsb_i2c_write_bytes(&client, command,
-					gsb->data, info->access_length);
-		}
-		break;
-
-	default:
-		pr_info("protocol(0x%02x) is not supported.\n", accessor_type);
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	gsb->status = status;
-
- err:
-	ACPI_FREE(ares);
-	return ret;
-}
-
-
-int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
-{
-	acpi_handle handle = ACPI_HANDLE(adapter->dev.parent);
-	struct acpi_i2c_handler_data *data;
-	acpi_status status;
-
-	if (!handle)
-		return -ENODEV;
-
-	data = kzalloc(sizeof(struct acpi_i2c_handler_data),
-			    GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->adapter = adapter;
-	status = acpi_bus_attach_private_data(handle, (void *)data);
-	if (ACPI_FAILURE(status)) {
-		kfree(data);
-		return -ENOMEM;
-	}
-
-	status = acpi_install_address_space_handler(handle,
-				ACPI_ADR_SPACE_GSBUS,
-				&acpi_i2c_space_handler,
-				NULL,
-				data);
-	if (ACPI_FAILURE(status)) {
-		dev_err(&adapter->dev, "Error installing i2c space handler\n");
-		acpi_bus_detach_private_data(handle);
-		kfree(data);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
-{
-	acpi_handle handle = ACPI_HANDLE(adapter->dev.parent);
-	struct acpi_i2c_handler_data *data;
-	acpi_status status;
-
-	if (!handle)
-		return;
-
-	acpi_remove_address_space_handler(handle,
-				ACPI_ADR_SPACE_GSBUS,
-				&acpi_i2c_space_handler);
-
-	status = acpi_bus_get_private_data(handle, (void **)&data);
-	if (ACPI_SUCCESS(status))
-		kfree(data);
-
-	acpi_bus_detach_private_data(handle);
-}
-#endif
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 632057a4461..ccfbbab82a1 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -27,6 +27,8 @@
    OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
    (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and
    (c) 2013  Wolfram Sang <wsa@the-dreams.de>
+   I2C ACPI code Copyright (C) 2014 Intel Corp
+   Author: Lan Tianyu <tianyu.lan@intel.com>
  */
 
 #include <linux/module.h>
@@ -78,6 +80,368 @@ void i2c_transfer_trace_unreg(void)
 	static_key_slow_dec(&i2c_trace_msg);
 }
 
+#if defined(CONFIG_ACPI)
+struct acpi_i2c_handler_data {
+	struct acpi_connection_info info;
+	struct i2c_adapter *adapter;
+};
+
+struct gsb_buffer {
+	u8	status;
+	u8	len;
+	union {
+		u16	wdata;
+		u8	bdata;
+		u8	data[0];
+	};
+} __packed;
+
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct i2c_board_info *info = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		struct acpi_resource_i2c_serialbus *sb;
+
+		sb = &ares->data.i2c_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+			info->addr = sb->slave_address;
+			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+				info->flags |= I2C_CLIENT_TEN;
+		}
+	} else if (info->irq < 0) {
+		struct resource r;
+
+		if (acpi_dev_resource_interrupt(ares, 0, &r))
+			info->irq = r.start;
+	}
+
+	/* Tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct list_head resource_list;
+	struct i2c_board_info info;
+	struct acpi_device *adev;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	memset(&info, 0, sizeof(info));
+	info.acpi_node.companion = adev;
+	info.irq = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     acpi_i2c_add_resource, &info);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info.addr)
+		return AE_OK;
+
+	adev->power.flags.ignore_parent = true;
+	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+	if (!i2c_new_device(adapter, &info)) {
+		adev->power.flags.ignore_parent = false;
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+static void acpi_i2c_register_devices(struct i2c_adapter *adap)
+{
+	acpi_handle handle;
+	acpi_status status;
+
+	if (!adap->dev.parent)
+		return;
+
+	handle = ACPI_HANDLE(adap->dev.parent);
+	if (!handle)
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_i2c_add_device, NULL,
+				     adap, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+
+#else /* CONFIG_ACPI */
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_ACPI */
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
+		u8 cmd, u8 *data, u8 data_len)
+{
+
+	struct i2c_msg msgs[2];
+	int ret;
+	u8 *buffer;
+
+	buffer = kzalloc(data_len, GFP_KERNEL);
+	if (!buffer)
+		return AE_NO_MEMORY;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags;
+	msgs[0].len = 1;
+	msgs[0].buf = &cmd;
+
+	msgs[1].addr = client->addr;
+	msgs[1].flags = client->flags | I2C_M_RD;
+	msgs[1].len = data_len;
+	msgs[1].buf = buffer;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		dev_err(&client->adapter->dev, "i2c read failed\n");
+	else
+		memcpy(data, buffer, data_len);
+
+	kfree(buffer);
+	return ret;
+}
+
+static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
+		u8 cmd, u8 *data, u8 data_len)
+{
+
+	struct i2c_msg msgs[1];
+	u8 *buffer;
+	int ret = AE_OK;
+
+	buffer = kzalloc(data_len + 1, GFP_KERNEL);
+	if (!buffer)
+		return AE_NO_MEMORY;
+
+	buffer[0] = cmd;
+	memcpy(buffer + 1, data, data_len);
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags;
+	msgs[0].len = data_len + 1;
+	msgs[0].buf = buffer;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		dev_err(&client->adapter->dev, "i2c write failed\n");
+
+	kfree(buffer);
+	return ret;
+}
+
+static acpi_status
+acpi_i2c_space_handler(u32 function, acpi_physical_address command,
+			u32 bits, u64 *value64,
+			void *handler_context, void *region_context)
+{
+	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
+	struct acpi_i2c_handler_data *data = handler_context;
+	struct acpi_connection_info *info = &data->info;
+	struct acpi_resource_i2c_serialbus *sb;
+	struct i2c_adapter *adapter = data->adapter;
+	struct i2c_client client;
+	struct acpi_resource *ares;
+	u32 accessor_type = function >> 16;
+	u8 action = function & ACPI_IO_MASK;
+	acpi_status ret = AE_OK;
+	int status;
+
+	ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
+	if (ACPI_FAILURE(ret))
+		return ret;
+
+	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	sb = &ares->data.i2c_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	memset(&client, 0, sizeof(client));
+	client.adapter = adapter;
+	client.addr = sb->slave_address;
+	client.flags = 0;
+
+	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+		client.flags |= I2C_CLIENT_TEN;
+
+	switch (accessor_type) {
+	case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_byte(&client);
+			if (status >= 0) {
+				gsb->bdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_byte(&client, gsb->bdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_BYTE:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_byte_data(&client, command);
+			if (status >= 0) {
+				gsb->bdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_byte_data(&client, command,
+					gsb->bdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_WORD:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_word_data(&client, command);
+			if (status >= 0) {
+				gsb->wdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_word_data(&client, command,
+					gsb->wdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_block_data(&client, command,
+					gsb->data);
+			if (status >= 0) {
+				gsb->len = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_block_data(&client, command,
+					gsb->len, gsb->data);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
+		if (action == ACPI_READ) {
+			status = acpi_gsb_i2c_read_bytes(&client, command,
+					gsb->data, info->access_length);
+			if (status > 0)
+				status = 0;
+		} else {
+			status = acpi_gsb_i2c_write_bytes(&client, command,
+					gsb->data, info->access_length);
+		}
+		break;
+
+	default:
+		pr_info("protocol(0x%02x) is not supported.\n", accessor_type);
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	gsb->status = status;
+
+ err:
+	ACPI_FREE(ares);
+	return ret;
+}
+
+
+static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
+{
+	acpi_handle handle;
+	struct acpi_i2c_handler_data *data;
+	acpi_status status;
+
+	if (!adapter->dev.parent)
+		return -ENODEV;
+
+	handle = ACPI_HANDLE(adapter->dev.parent);
+
+	if (!handle)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct acpi_i2c_handler_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->adapter = adapter;
+	status = acpi_bus_attach_private_data(handle, (void *)data);
+	if (ACPI_FAILURE(status)) {
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	status = acpi_install_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&acpi_i2c_space_handler,
+				NULL,
+				data);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&adapter->dev, "Error installing i2c space handler\n");
+		acpi_bus_detach_private_data(handle);
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
+{
+	acpi_handle handle;
+	struct acpi_i2c_handler_data *data;
+	acpi_status status;
+
+	if (!adapter->dev.parent)
+		return;
+
+	handle = ACPI_HANDLE(adapter->dev.parent);
+
+	if (!handle)
+		return;
+
+	acpi_remove_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&acpi_i2c_space_handler);
+
+	status = acpi_bus_get_private_data(handle, (void **)&data);
+	if (ACPI_SUCCESS(status))
+		kfree(data);
+
+	acpi_bus_detach_private_data(handle);
+}
+#else /* CONFIG_ACPI_I2C_OPREGION */
+static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
+{ }
+
+static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
+{ return 0; }
+#endif /* CONFIG_ACPI_I2C_OPREGION */
+
 /* ------------------------------------------------------------------------- */
 
 static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,