ide: make remaining built-in only IDE host drivers modular (take 2)

* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
  file for probing PCI host drivers registered with IDE core (special case
  for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
  the ordering in which all IDE host drivers are probed when IDE is built-in
  during link time.

* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
  specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
  arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).

* Move probing of ide-cris (cris arch specific) host driver before cmd640
  (x86 arch specific).

* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
  on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
  (h8300 arch specific).

* Add "probe_vlb" kernel parameter to cmd640 host driver and update
  Documentation/ide.txt accordingly.

* Make IDE_ARM config option visible so it can also be disabled if needed.

* Remove bogus comment from ide.c while at it.

v2:
* Fix two issues spotted by Sergei:
  - replace ENOMEM error value by ENOENT in ide-h8300 host driver
  - fix MODULE_PARM_DESC() in cmd640 host driver

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 14 insertions, 12 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 7c419e87a4a..e92128a87f2 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -325,7 +325,7 @@ config BLK_DEV_PLATFORM
 	  If unsure, say N.
 
 config BLK_DEV_CMD640
-	bool "CMD640 chipset bugfix/support"
+	tristate "CMD640 chipset bugfix/support"
 	depends on X86
 	---help---
 	  The CMD-Technologies CMD640 IDE chip is used on many common 486 and
@@ -359,7 +359,7 @@ config BLK_DEV_CMD640_ENHANCED
 	  Otherwise say N.
 
 config BLK_DEV_IDEPNP
-	bool "PNP EIDE support"
+	tristate "PNP EIDE support"
 	depends on PNP
 	help
 	  If you have a PnP (Plug and Play) compatible EIDE card and
@@ -788,7 +788,7 @@ config BLK_DEV_CELLEB
 endif
 
 config BLK_DEV_IDE_PMAC
-	bool "Builtin PowerMac IDE support"
+	tristate "Builtin PowerMac IDE support"
 	depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
 	help
 	  This driver provides support for the built-in IDE controller on
@@ -842,7 +842,9 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
        depends on BLK_DEV_IDE_AU1XXX
 
 config IDE_ARM
-	def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+	tristate "ARM IDE support"
+	depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+	default y
 
 config BLK_DEV_IDE_ICSIDE
 	tristate "ICS IDE interface support"
@@ -874,7 +876,7 @@ config BLK_DEV_IDE_BAST
 	  Simtec BAST or the Thorcom VR1000
 
 config ETRAX_IDE
-	bool "ETRAX IDE support"
+	tristate "ETRAX IDE support"
 	depends on CRIS && BROKEN
 	select BLK_DEV_IDEDMA
 	help
@@ -908,14 +910,14 @@ config ETRAX_IDE_G27_RESET
 endchoice
 
 config IDE_H8300
-	bool "H8300 IDE support"
+	tristate "H8300 IDE support"
 	depends on H8300
 	default y
 	help
 	  Enables the H8300 IDE driver.
 
 config BLK_DEV_GAYLE
-	bool "Amiga Gayle IDE interface support"
+	tristate "Amiga Gayle IDE interface support"
 	depends on AMIGA
 	help
 	  This is the IDE driver for the Amiga Gayle IDE interface. It supports
@@ -946,7 +948,7 @@ config BLK_DEV_IDEDOUBLER
 	  runtime using the "ide=doubler" kernel boot parameter.
 
 config BLK_DEV_BUDDHA
-	bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
+	tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
 	depends on ZORRO && EXPERIMENTAL
 	help
 	  This is the IDE driver for the IDE interfaces on the Buddha, 
@@ -958,7 +960,7 @@ config BLK_DEV_BUDDHA
 	  to one of its IDE interfaces.
 
 config BLK_DEV_FALCON_IDE
-	bool "Falcon IDE interface support"
+	tristate "Falcon IDE interface support"
 	depends on ATARI
 	help
 	  This is the IDE driver for the builtin IDE interface on the Atari
@@ -967,7 +969,7 @@ config BLK_DEV_FALCON_IDE
 	  interface.
 
 config BLK_DEV_MAC_IDE
-	bool "Macintosh Quadra/Powerbook IDE interface support"
+	tristate "Macintosh Quadra/Powerbook IDE interface support"
 	depends on MAC
 	help
 	  This is the IDE driver for the builtin IDE interface on some m68k
@@ -980,7 +982,7 @@ config BLK_DEV_MAC_IDE
 	  builtin IDE interface.
 
 config BLK_DEV_Q40IDE
-	bool "Q40/Q60 IDE interface support"
+	tristate "Q40/Q60 IDE interface support"
 	depends on Q40
 	help
 	  Enable the on-board IDE controller in the Q40/Q60.  This should
@@ -988,7 +990,7 @@ config BLK_DEV_Q40IDE
 	  drive subsystem through an expansion card.
 
 config BLK_DEV_MPC8xx_IDE
-	bool "MPC8xx IDE support"
+	tristate "MPC8xx IDE support"
 	depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
 	help
 	  This option provides support for IDE on Motorola MPC8xx Systems.