summaryrefslogtreecommitdiffstats
path: root/drivers/ide/Kconfig
diff options
context:
space:
mode:
authorMatti Linnanvuori <mattilinnanvuori@yahoo.com>2007-11-05 21:42:26 +0100
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-11-05 21:42:26 +0100
commit127ba2896512699338d997418d7cf5064720b55b (patch)
tree8aa76a18dbc18c0d8f66d4b192ba81077b8950b1 /drivers/ide/Kconfig
parent699b052ad2996c4ca87aa4b9d4a51dcca0f9e588 (diff)
ide/Kconfig: add IDEDISK_MULTI_MODE text adapted from hdparm manual page
Add IDEDISK_MULTI_MODE text adapted from hdparm manual page. Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/Kconfig')
-rw-r--r--drivers/ide/Kconfig19
1 files changed, 16 insertions, 3 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6eaece96524..e2c21699603 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -152,9 +152,22 @@ config BLK_DEV_IDEDISK
If unsure, say Y.
config IDEDISK_MULTI_MODE
- bool "Use multi-mode by default"
- help
- If you get this error, try to say Y here:
+ bool "Use multiple sector mode for Programmed Input/Output by default"
+ help
+ This setting is irrelevant for most IDE disks, with direct memory
+ access, to which multiple sector mode does not apply. Multiple sector
+ mode is a feature of most modern IDE hard drives, permitting the
+ transfer of multiple sectors per Programmed Input/Output interrupt,
+ rather than the usual one sector per interrupt. When this feature is
+ enabled, it can reduce operating system overhead for disk Programmed
+ Input/Output. On some systems, it also can increase the data
+ throughput of Programmed Input/Output. Some drives, however, seemed
+ to run slower with multiple sector mode enabled. Some drives claimed
+ to support multiple sector mode, but lost data at some settings.
+ Under rare circumstances, such failures could result in massive
+ filesystem corruption.
+
+ If you get the following error, try to say Y here:
hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hda: set_multmode: error=0x04 { DriveStatusError }