Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits)
  ide: use only ->set_pio_mode method for programming PIO modes (take 2)
  sis5513: don't change UDMA settings when programming PIO
  it8213/piix/slc90e66: don't change DMA settings when programming PIO
  alim15x3: PIO mode setup fixes
  siimage: fix ->set_pio_mode method to select PIO data transfer
  cs5520: don't enable VDMA in ->speedproc
  sc1200: remove redundant warning message from sc1200_tune_chipset()
  ide-pmac: PIO mode setup fixes (take 3)
  icside: fix ->speedproc to return on unsupported modes (take 5)
  sgiioc4: use ide_tune_dma()
  amd74xx/via82cxxx: use ide_tune_dma()
  ide: add ide_set{_max}_pio() (take 4)
  ide: Kconfig face-lift
  ide: move ide_rate_filter() calls to the upper layer (take 2)
  sis5513: add ->udma_filter method for chipset_family >= ATA_133
  ide: mode limiting fixes for user requested speed changes
  ide: add missing ide_rate_filter() calls to ->speedproc()-s
  ide: call udma_filter() before resorting to the UltraDMA mask
  ide: make jmicron match vendor and device class
  pdc202xx_new: switch to using pci_get_slot() (take 2)
  ...

1 files changed, 3 insertions, 10 deletions

diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 04636f7eaae..4bb42b30bfc 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -680,12 +680,10 @@ static void cris_dma_off(ide_drive_t *drive)
 {
 }
 
-static void tune_cris_ide(ide_drive_t *drive, u8 pio)
+static void cris_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	int setup, strobe, hold;
 
-	pio = ide_get_best_pio_mode(drive, pio, 4);
-
 	switch(pio)
 	{
 		case 0:
@@ -722,15 +720,10 @@ static void tune_cris_ide(ide_drive_t *drive, u8 pio)
 	(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
-static int speed_cris_ide(ide_drive_t *drive, u8 speed)
+static int speed_cris_ide(ide_drive_t *drive, const u8 speed)
 {
 	int cyc = 0, dvs = 0, strobe = 0, hold = 0;
 
-	if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
-		tune_cris_ide(drive, speed - XFER_PIO_0);
-		return ide_config_drive_speed(drive, speed);
-	}
-
 	switch(speed)
 	{
 		case XFER_UDMA_0:
@@ -797,7 +790,7 @@ init_e100_ide (void)
 		ide_register_hw(&hw, 1, &hwif);
 		hwif->mmio = 1;
 		hwif->chipset = ide_etrax100;
-		hwif->tuneproc = &tune_cris_ide;
+		hwif->set_pio_mode = &cris_set_pio_mode;
 		hwif->speedproc = &speed_cris_ide;
 		hwif->ata_input_data = &cris_ide_input_data;
 		hwif->ata_output_data = &cris_ide_output_data;