ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
new file mode 100644
index 00000000000..983d957a018
--- /dev/null
+++ b/drivers/ide/cs5535.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
+ * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
+ *
+ * History:
+ * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
+ * - Reworked tuneproc, set_drive, misc mods to prep for mainline
+ * - Work was sponsored by CIS (M) Sdn Bhd.
+ * Ported to Kernel 2.6.11 on June 26, 2005 by
+ *   Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
+ *   Alexander Kiausch <alex.kiausch@t-online.de>
+ * Originally developed by AMD for 2.4/2.6
+ *
+ * Development of this chipset driver was funded
+ * by the nice folks at National Semiconductor/AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Documentation:
+ *  CS5535 documentation available from AMD
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+#define DRV_NAME "cs5535"
+
+#define MSR_ATAC_BASE		0x51300000
+#define ATAC_GLD_MSR_CAP	(MSR_ATAC_BASE+0)
+#define ATAC_GLD_MSR_CONFIG	(MSR_ATAC_BASE+0x01)
+#define ATAC_GLD_MSR_SMI	(MSR_ATAC_BASE+0x02)
+#define ATAC_GLD_MSR_ERROR	(MSR_ATAC_BASE+0x03)
+#define ATAC_GLD_MSR_PM		(MSR_ATAC_BASE+0x04)
+#define ATAC_GLD_MSR_DIAG	(MSR_ATAC_BASE+0x05)
+#define ATAC_IO_BAR		(MSR_ATAC_BASE+0x08)
+#define ATAC_RESET		(MSR_ATAC_BASE+0x10)
+#define ATAC_CH0D0_PIO		(MSR_ATAC_BASE+0x20)
+#define ATAC_CH0D0_DMA		(MSR_ATAC_BASE+0x21)
+#define ATAC_CH0D1_PIO		(MSR_ATAC_BASE+0x22)
+#define ATAC_CH0D1_DMA		(MSR_ATAC_BASE+0x23)
+#define ATAC_PCI_ABRTERR	(MSR_ATAC_BASE+0x24)
+#define ATAC_BM0_CMD_PRIM	0x00
+#define ATAC_BM0_STS_PRIM	0x02
+#define ATAC_BM0_PRD		0x04
+#define CS5535_CABLE_DETECT	0x48
+
+/* Format I PIO settings. We separate out cmd and data for safer timings */
+
+static unsigned int cs5535_pio_cmd_timings[5] =
+{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
+static unsigned int cs5535_pio_dta_timings[5] =
+{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
+
+static unsigned int cs5535_mwdma_timings[3] =
+{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
+
+static unsigned int cs5535_udma_timings[5] =
+{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
+
+/* Macros to check if the register is the reset value -  reset value is an
+   invalid timing and indicates the register has not been set previously */
+
+#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
+#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
+
+/****
+ *	cs5535_set_speed         -     Configure the chipset to the new speed
+ *	@drive: Drive to set up
+ *	@speed: desired speed
+ *
+ *	cs5535_set_speed() configures the chipset to a new speed.
+ */
+static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
+{
+	u32 reg = 0, dummy;
+	u8 unit = drive->dn & 1;
+
+	/* Set the PIO timings */
+	if (speed < XFER_SW_DMA_0) {
+		ide_drive_t *pair = ide_get_pair_dev(drive);
+		u8 cmd, pioa;
+
+		cmd = pioa = speed - XFER_PIO_0;
+
+		if (pair) {
+			u8 piob = ide_get_best_pio_mode(pair, 255, 4);
+
+			if (piob < cmd)
+				cmd = piob;
+		}
+
+		/* Write the speed of the current drive */
+		reg = (cs5535_pio_cmd_timings[cmd] << 16) |
+			cs5535_pio_dta_timings[pioa];
+		wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
+
+		/* And if nessesary - change the speed of the other drive */
+		rdmsr(unit ?  ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
+
+		if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
+			cs5535_pio_cmd_timings[cmd]) {
+			reg &= 0x0000FFFF;
+			reg |= cs5535_pio_cmd_timings[cmd] << 16;
+			wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
+		}
+
+		/* Set bit 31 of the DMA register for PIO format 1 timings */
+		rdmsr(unit ?  ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
+		wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
+					reg | 0x80000000UL, 0);
+	} else {
+		rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
+
+		reg &= 0x80000000UL;  /* Preserve the PIO format bit */
+
+		if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
+			reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
+		else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+			reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
+		else
+			return;
+
+		wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
+	}
+}
+
+/**
+ *	cs5535_set_dma_mode	-	set host controller for DMA mode
+ *	@drive: drive
+ *	@speed: DMA mode
+ *
+ *	Programs the chipset for DMA mode.
+ */
+
+static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+	cs5535_set_speed(drive, speed);
+}
+
+/**
+ *	cs5535_set_pio_mode	-	set host controller for PIO mode
+ *	@drive: drive
+ *	@pio: PIO mode number
+ *
+ *	A callback from the upper layers for PIO-only tuning.
+ */
+
+static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	cs5535_set_speed(drive, XFER_PIO_0 + pio);
+}
+
+static u8 cs5535_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	u8 bit;
+
+	/* if a 80 wire cable was detected */
+	pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
+
+	return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+}
+
+static const struct ide_port_ops cs5535_port_ops = {
+	.set_pio_mode		= cs5535_set_pio_mode,
+	.set_dma_mode		= cs5535_set_dma_mode,
+	.cable_detect		= cs5535_cable_detect,
+};
+
+static const struct ide_port_info cs5535_chipset __devinitdata = {
+	.name		= DRV_NAME,
+	.port_ops	= &cs5535_port_ops,
+	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA4,
+};
+
+static int __devinit cs5535_init_one(struct pci_dev *dev,
+					const struct pci_device_id *id)
+{
+	return ide_pci_init_one(dev, &cs5535_chipset, NULL);
+}
+
+static const struct pci_device_id cs5535_pci_tbl[] = {
+	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
+
+static struct pci_driver cs5535_pci_driver = {
+	.name		= "CS5535_IDE",
+	.id_table	= cs5535_pci_tbl,
+	.probe		= cs5535_init_one,
+	.remove		= ide_pci_remove,
+	.suspend	= ide_pci_suspend,
+	.resume		= ide_pci_resume,
+};
+
+static int __init cs5535_ide_init(void)
+{
+	return ide_pci_register_driver(&cs5535_pci_driver);
+}
+
+static void __exit cs5535_ide_exit(void)
+{
+	pci_unregister_driver(&cs5535_pci_driver);
+}
+
+module_init(cs5535_ide_init);
+module_exit(cs5535_ide_exit);
+
+MODULE_AUTHOR("AMD");
+MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
+MODULE_LICENSE("GPL");