ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)

There are now two methods that clear the port interrupt: ack_intr() method,
implemented only on M680x0 machines, that is called at the start of ide_intr(),
and clear_irq() method, that is called somewhat later in this function.  In
order to stop this duplication, delegate the task of clearing the interrupt
to clear_irq() method, only leaving to ack_intr() the task of testing for the
port interrupt.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 11 insertions, 12 deletions

diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index 4451a6a5dfe..c5dd1e5cca4 100644
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -66,7 +66,7 @@ MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
      *  Check and acknowledge the interrupt status
      */
 
-static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
+static int gayle_ack_intr(ide_hwif_t *hwif)
 {
     unsigned char ch;
 
@@ -76,16 +76,12 @@ static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
     return 1;
 }
 
-static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
+static void gayle_a1200_clear_irq(ide_drive_t *drive)
 {
-    unsigned char ch;
+    ide_hwif_t *hwif = drive->hwif;
 
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & GAYLE_IRQ_IDE))
-	return 0;
     (void)z_readb(hwif->io_ports.status_addr);
     z_writeb(0x7c, hwif->io_ports.irq_addr);
-    return 1;
 }
 
 static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
@@ -108,6 +104,10 @@ static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops gayle_a1200_port_ops = {
+	.clear_irq		= gayle_a1200_clear_irq,
+};
+
 static const struct ide_port_info gayle_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
@@ -123,9 +123,9 @@ static int __init gayle_init(void)
 {
     unsigned long phys_base, res_start, res_n;
     unsigned long base, ctrlport, irqport;
-    ide_ack_intr_t *ack_intr;
     int a4000, i, rc;
     struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
+    struct ide_port_info d = gayle_port_info;
 
     if (!MACH_IS_AMIGA)
 	return -ENODEV;
@@ -148,11 +148,10 @@ found:
 	if (a4000) {
 	    phys_base = GAYLE_BASE_4000;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
-	    ack_intr = gayle_ack_intr_a4000;
 	} else {
 	    phys_base = GAYLE_BASE_1200;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
-	    ack_intr = gayle_ack_intr_a1200;
+	    d.port_ops = &gayle_a1200_port_ops;
 	}
 
 	res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
@@ -165,12 +164,12 @@ found:
 	base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
 	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
 
-	gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
+	gayle_setup_ports(&hw[i], base, ctrlport, irqport, gayle_ack_intr);
 
 	hws[i] = &hw[i];
     }
 
-    rc = ide_host_add(&gayle_port_info, hws, i, NULL);
+    rc = ide_host_add(&d, hws, i, NULL);
     if (rc)
 	release_mem_region(res_start, res_n);