summaryrefslogtreecommitdiffstats
path: root/drivers/ide/ide-dma.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-12-12 23:31:58 +0100
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-12-12 23:31:58 +0100
commit3ab7efe8e2cbcca2d401b43cfcc2fa9a7dac2299 (patch)
tree7ddbb4d5fdae6f61d23ef0ba2a43aaca23bd2195 /drivers/ide/ide-dma.c
parente11b9035a47da66fcd4bafd3a5f6b14f51ca667e (diff)
ide: DMA reporting and validity checking fixes (take 3)
* ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Nick Warne <nick@ukfsn.org> Cc: Mark Lord <lkml@rtr.ca> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/ide-dma.c')
-rw-r--r--drivers/ide/ide-dma.c60
1 files changed, 15 insertions, 45 deletions
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 0d795a1678c..6879aaae544 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -753,10 +753,12 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
mode = XFER_MW_DMA_1;
}
- printk(KERN_DEBUG "%s: %s mode selected\n", drive->name,
+ mode = min(mode, req_mode);
+
+ printk(KERN_INFO "%s: %s mode selected\n", drive->name,
mode ? ide_xfer_verbose(mode) : "no DMA");
- return min(mode, req_mode);
+ return mode;
}
EXPORT_SYMBOL_GPL(ide_find_dma_mode);
@@ -772,6 +774,9 @@ static int ide_tune_dma(ide_drive_t *drive)
if (__ide_dma_bad_drive(drive))
return 0;
+ if (ide_id_dma_bug(drive))
+ return 0;
+
if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
return config_drive_for_dma(drive);
@@ -806,58 +811,23 @@ static int ide_dma_check(ide_drive_t *drive)
return vdma ? 0 : -1;
}
-void ide_dma_verbose(ide_drive_t *drive)
+int ide_id_dma_bug(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
if (id->field_valid & 4) {
if ((id->dma_ultra >> 8) && (id->dma_mword >> 8))
- goto bug_dma_off;
- if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) {
- if (((id->dma_ultra >> 11) & 0x1F) &&
- eighty_ninty_three(drive)) {
- if ((id->dma_ultra >> 15) & 1) {
- printk(", UDMA(mode 7)");
- } else if ((id->dma_ultra >> 14) & 1) {
- printk(", UDMA(133)");
- } else if ((id->dma_ultra >> 13) & 1) {
- printk(", UDMA(100)");
- } else if ((id->dma_ultra >> 12) & 1) {
- printk(", UDMA(66)");
- } else if ((id->dma_ultra >> 11) & 1) {
- printk(", UDMA(44)");
- } else
- goto mode_two;
- } else {
- mode_two:
- if ((id->dma_ultra >> 10) & 1) {
- printk(", UDMA(33)");
- } else if ((id->dma_ultra >> 9) & 1) {
- printk(", UDMA(25)");
- } else if ((id->dma_ultra >> 8) & 1) {
- printk(", UDMA(16)");
- }
- }
- } else {
- printk(", (U)DMA"); /* Can be BIOS-enabled! */
- }
+ goto err_out;
} else if (id->field_valid & 2) {
if ((id->dma_mword >> 8) && (id->dma_1word >> 8))
- goto bug_dma_off;
- printk(", DMA");
- } else if (id->field_valid & 1) {
- goto bug_dma_off;
+ goto err_out;
}
- return;
-bug_dma_off:
- printk(", BUG DMA OFF");
- hwif->dma_off_quietly(drive);
- return;
+ return 0;
+err_out:
+ printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
+ return 1;
}
-EXPORT_SYMBOL(ide_dma_verbose);
-
int ide_set_dma(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;