Merge branch 'linux-2.6'

1 files changed, 24 insertions, 53 deletions

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index bb9693dabe4..e2a7e95e163 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -158,14 +158,6 @@ void default_hwif_mmiops (ide_hwif_t *hwif)
 
 EXPORT_SYMBOL(default_hwif_mmiops);
 
-u32 ide_read_24 (ide_drive_t *drive)
-{
-	u8 hcyl = HWIF(drive)->INB(IDE_HCYL_REG);
-	u8 lcyl = HWIF(drive)->INB(IDE_LCYL_REG);
-	u8 sect = HWIF(drive)->INB(IDE_SECTOR_REG);
-	return (hcyl<<16)|(lcyl<<8)|sect;
-}
-
 void SELECT_DRIVE (ide_drive_t *drive)
 {
 	if (HWIF(drive)->selectproc)
@@ -175,26 +167,12 @@ void SELECT_DRIVE (ide_drive_t *drive)
 
 EXPORT_SYMBOL(SELECT_DRIVE);
 
-void SELECT_INTERRUPT (ide_drive_t *drive)
-{
-	if (HWIF(drive)->intrproc)
-		HWIF(drive)->intrproc(drive);
-	else
-		HWIF(drive)->OUTB(drive->ctl|2, IDE_CONTROL_REG);
-}
-
 void SELECT_MASK (ide_drive_t *drive, int mask)
 {
 	if (HWIF(drive)->maskproc)
 		HWIF(drive)->maskproc(drive, mask);
 }
 
-void QUIRK_LIST (ide_drive_t *drive)
-{
-	if (HWIF(drive)->quirkproc)
-		drive->quirk_list = HWIF(drive)->quirkproc(drive);
-}
-
 /*
  * Some localbus EIDE interfaces require a special access sequence
  * when using 32-bit I/O instructions to transfer data.  We call this
@@ -449,7 +427,6 @@ int drive_is_ready (ide_drive_t *drive)
 	udelay(1);
 #endif
 
-#ifdef CONFIG_IDEPCI_SHARE_IRQ
 	/*
 	 * We do a passive status test under shared PCI interrupts on
 	 * cards that truly share the ATA side interrupt, but may also share
@@ -459,7 +436,6 @@ int drive_is_ready (ide_drive_t *drive)
 	if (IDE_CONTROL_REG)
 		stat = hwif->INB(IDE_ALTSTATUS_REG);
 	else
-#endif /* CONFIG_IDEPCI_SHARE_IRQ */
 		/* Note: this may clear a pending IRQ!! */
 		stat = hwif->INB(IDE_STATUS_REG);
 
@@ -642,9 +618,9 @@ no_80w:
 
 int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
 {
-	if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) &&
-	    (args->tfRegister[IDE_SECTOR_OFFSET] > XFER_UDMA_2) &&
-	    (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER)) {
+	if (args->tf.command == WIN_SETFEATURES &&
+	    args->tf.nsect > XFER_UDMA_2 &&
+	    args->tf.feature == SETFEATURES_XFER) {
 		if (eighty_ninty_three(drive) == 0) {
 			printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
 					    "be set\n", drive->name);
@@ -662,9 +638,9 @@ int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
  */
 int set_transfer (ide_drive_t *drive, ide_task_t *args)
 {
-	if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) &&
-	    (args->tfRegister[IDE_SECTOR_OFFSET] >= XFER_SW_DMA_0) &&
-	    (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER) &&
+	if (args->tf.command == WIN_SETFEATURES &&
+	    args->tf.nsect >= XFER_SW_DMA_0 &&
+	    args->tf.feature == SETFEATURES_XFER &&
 	    (drive->id->dma_ultra ||
 	     drive->id->dma_mword ||
 	     drive->id->dma_1word))
@@ -712,8 +688,7 @@ int ide_driveid_update(ide_drive_t *drive)
 	 */
 
 	SELECT_MASK(drive, 1);
-	if (IDE_CONTROL_REG)
-		hwif->OUTB(drive->ctl,IDE_CONTROL_REG);
+	ide_set_irq(drive, 1);
 	msleep(50);
 	hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG);
 	timeout = jiffies + WAIT_WORSTCASE;
@@ -766,8 +741,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 //		msleep(50);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
-	if (hwif->ide_dma_on)	/* check if host supports DMA */
-		hwif->dma_host_off(drive);
+	if (hwif->dma_host_set)	/* check if host supports DMA */
+		hwif->dma_host_set(drive, 0);
 #endif
 
 	/* Skip setting PIO flow-control modes on pre-EIDE drives */
@@ -796,13 +771,12 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 	SELECT_DRIVE(drive);
 	SELECT_MASK(drive, 0);
 	udelay(1);
-	if (IDE_CONTROL_REG)
-		hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
+	ide_set_irq(drive, 0);
 	hwif->OUTB(speed, IDE_NSECTOR_REG);
 	hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
 	hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
-	if ((IDE_CONTROL_REG) && (drive->quirk_list == 2))
-		hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
+	if (drive->quirk_list == 2)
+		ide_set_irq(drive, 1);
 
 	error = __ide_wait_stat(drive, drive->ready_stat,
 				BUSY_STAT|DRQ_STAT|ERR_STAT,
@@ -823,10 +797,11 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 
  skip:
 #ifdef CONFIG_BLK_DEV_IDEDMA
-	if (speed >= XFER_SW_DMA_0)
-		hwif->dma_host_on(drive);
-	else if (hwif->ide_dma_on)	/* check if host supports DMA */
-		hwif->dma_off_quietly(drive);
+	if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) &&
+	    drive->using_dma)
+		hwif->dma_host_set(drive, 1);
+	else if (hwif->dma_host_set)	/* check if host supports DMA */
+		ide_dma_off_quietly(drive);
 #endif
 
 	switch(speed) {
@@ -902,8 +877,9 @@ EXPORT_SYMBOL(ide_set_handler);
  *	handler and IRQ setup do not race. All IDE command kick off
  *	should go via this function or do equivalent locking.
  */
- 
-void ide_execute_command(ide_drive_t *drive, task_ioreg_t cmd, ide_handler_t *handler, unsigned timeout, ide_expiry_t *expiry)
+
+void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
+			 unsigned timeout, ide_expiry_t *expiry)
 {
 	unsigned long flags;
 	ide_hwgroup_t *hwgroup = HWGROUP(drive);
@@ -1035,10 +1011,10 @@ static void check_dma_crc(ide_drive_t *drive)
 {
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	if (drive->crc_count) {
-		drive->hwif->dma_off_quietly(drive);
+		ide_dma_off_quietly(drive);
 		ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive));
 		if (drive->current_speed >= XFER_SW_DMA_0)
-			(void) HWIF(drive)->ide_dma_on(drive);
+			ide_dma_on(drive);
 	} else
 		ide_dma_off(drive);
 #endif
@@ -1051,8 +1027,7 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
 	drive->special.all = 0;
 	drive->special.b.set_geometry = legacy;
 	drive->special.b.recalibrate  = legacy;
-	if (OK_TO_RESET_CONTROLLER)
-		drive->mult_count = 0;
+	drive->mult_count = 0;
 	if (!drive->keep_settings && !drive->using_dma)
 		drive->mult_req = 0;
 	if (drive->mult_req != drive->mult_count)
@@ -1137,7 +1112,6 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 	for (unit = 0; unit < MAX_DRIVES; ++unit)
 		pre_reset(&hwif->drives[unit]);
 
-#if OK_TO_RESET_CONTROLLER
 	if (!IDE_CONTROL_REG) {
 		spin_unlock_irqrestore(&ide_lock, flags);
 		return ide_stopped;
@@ -1174,11 +1148,8 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 	 * state when the disks are reset this way. At least, the Winbond
 	 * 553 documentation says that
 	 */
-	if (hwif->resetproc != NULL) {
+	if (hwif->resetproc)
 		hwif->resetproc(drive);
-	}
-	
-#endif	/* OK_TO_RESET_CONTROLLER */
 
 	spin_unlock_irqrestore(&ide_lock, flags);
 	return ide_started;