Merge commit 'origin/master' into for-linus/xen/master

* commit 'origin/master': (4825 commits)
  Fix build errors due to CONFIG_BRANCH_TRACER=y
  parport: Use the PCI IRQ if offered
  tty: jsm cleanups
  Adjust path to gpio headers
  KGDB_SERIAL_CONSOLE check for module
  Change KCONFIG name
  tty: Blackin CTS/RTS
  Change hardware flow control from poll to interrupt driven
  Add support for the MAX3100 SPI UART.
  lanana: assign a device name and numbering for MAX3100
  serqt: initial clean up pass for tty side
  tty: Use the generic RS485 ioctl on CRIS
  tty: Correct inline types for tty_driver_kref_get()
  splice: fix deadlock in splicing to file
  nilfs2: support nanosecond timestamp
  nilfs2: introduce secondary super block
  nilfs2: simplify handling of active state of segments
  nilfs2: mark minor flag for checkpoint created by internal operation
  nilfs2: clean up sketch file
  nilfs2: super block operations fix endian bug
  ...

Conflicts:
	arch/x86/include/asm/thread_info.h
	arch/x86/lguest/boot.c
	drivers/xen/manage.c

1 files changed, 27 insertions, 20 deletions

diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 60538d9c84e..bb7858ebb7d 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -1,6 +1,5 @@
 #include <linux/kernel.h>
 #include <linux/ide.h>
-#include <linux/hdreg.h>
 
 int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 {
@@ -8,7 +7,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq;
 	struct request_pm_state rqpm;
-	ide_task_t args;
+	struct ide_cmd cmd;
 	int ret;
 
 	/* call ACPI _GTM only once */
@@ -16,10 +15,10 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 		ide_acpi_get_timing(hwif);
 
 	memset(&rqpm, 0, sizeof(rqpm));
-	memset(&args, 0, sizeof(args));
+	memset(&cmd, 0, sizeof(cmd));
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_PM_SUSPEND;
-	rq->special = &args;
+	rq->special = &cmd;
 	rq->data = &rqpm;
 	rqpm.pm_step = IDE_PM_START_SUSPEND;
 	if (mesg.event == PM_EVENT_PRETHAW)
@@ -42,7 +41,7 @@ int generic_ide_resume(struct device *dev)
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq;
 	struct request_pm_state rqpm;
-	ide_task_t args;
+	struct ide_cmd cmd;
 	int err;
 
 	/* call ACPI _PS0 / _STM only once */
@@ -54,11 +53,11 @@ int generic_ide_resume(struct device *dev)
 	ide_acpi_exec_tfs(drive);
 
 	memset(&rqpm, 0, sizeof(rqpm));
-	memset(&args, 0, sizeof(args));
+	memset(&cmd, 0, sizeof(cmd));
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_PM_RESUME;
 	rq->cmd_flags |= REQ_PREEMPT;
-	rq->special = &args;
+	rq->special = &cmd;
 	rq->data = &rqpm;
 	rqpm.pm_step = IDE_PM_START_RESUME;
 	rqpm.pm_state = PM_EVENT_ON;
@@ -109,9 +108,9 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
 ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 {
 	struct request_pm_state *pm = rq->data;
-	ide_task_t *args = rq->special;
+	struct ide_cmd *cmd = rq->special;
 
-	memset(args, 0, sizeof(*args));
+	memset(cmd, 0, sizeof(*cmd));
 
 	switch (pm->pm_step) {
 	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
@@ -124,12 +123,12 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 			return ide_stopped;
 		}
 		if (ata_id_flush_ext_enabled(drive->id))
-			args->tf.command = ATA_CMD_FLUSH_EXT;
+			cmd->tf.command = ATA_CMD_FLUSH_EXT;
 		else
-			args->tf.command = ATA_CMD_FLUSH;
+			cmd->tf.command = ATA_CMD_FLUSH;
 		goto out_do_tf;
 	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
-		args->tf.command = ATA_CMD_STANDBYNOW1;
+		cmd->tf.command = ATA_CMD_STANDBYNOW1;
 		goto out_do_tf;
 	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
 		ide_set_max_pio(drive);
@@ -142,7 +141,7 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 			ide_complete_power_step(drive, rq);
 		return ide_stopped;
 	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
-		args->tf.command = ATA_CMD_IDLEIMMEDIATE;
+		cmd->tf.command = ATA_CMD_IDLEIMMEDIATE;
 		goto out_do_tf;
 	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
 		/*
@@ -160,27 +159,34 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 	}
 
 	pm->pm_step = IDE_PM_COMPLETED;
+
 	return ide_stopped;
 
 out_do_tf:
-	args->tf_flags	 = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
-	args->data_phase = TASKFILE_NO_DATA;
-	return do_rw_taskfile(drive, args);
+	cmd->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+	cmd->protocol = ATA_PROT_NODATA;
+
+	return do_rw_taskfile(drive, cmd);
 }
 
 /**
- *	ide_complete_pm_request - end the current Power Management request
+ *	ide_complete_pm_rq - end the current Power Management request
  *	@drive: target drive
  *	@rq: request
  *
  *	This function cleans up the current PM request and stops the queue
  *	if necessary.
  */
-void ide_complete_pm_request(ide_drive_t *drive, struct request *rq)
+void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
 {
 	struct request_queue *q = drive->queue;
+	struct request_pm_state *pm = rq->data;
 	unsigned long flags;
 
+	ide_complete_power_step(drive, rq);
+	if (pm->pm_step != IDE_PM_COMPLETED)
+		return;
+
 #ifdef DEBUG_PM
 	printk("%s: completing PM request, %s\n", drive->name,
 	       blk_pm_suspend_request(rq) ? "suspend" : "resume");
@@ -217,6 +223,7 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 		 * point.
 		 */
 		ide_hwif_t *hwif = drive->hwif;
+		const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 		struct request_queue *q = drive->queue;
 		unsigned long flags;
 		int rc;
@@ -226,8 +233,8 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 		rc = ide_wait_not_busy(hwif, 35000);
 		if (rc)
 			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
-		SELECT_DRIVE(drive);
-		hwif->tp_ops->set_irq(hwif, 1);
+		tp_ops->dev_select(drive);
+		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
 		rc = ide_wait_not_busy(hwif, 100000);
 		if (rc)
 			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);