Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/macintosh/adbhid.c

1 files changed, 25 insertions, 98 deletions

diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 077fb674a96..a96a8b1b353 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -16,10 +16,6 @@
  *   (usually 14 & 15).
  * There can be up to two drives per interface, as per the ATA-2 spec.
  *
- * Primary:    ide0, port 0x1f0; major=3;  hda is minor=0; hdb is minor=64
- * Secondary:  ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
- * Tertiary:   ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
- * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
  * ...
  *
  *  From hd.c:
@@ -47,80 +43,6 @@
  *  This was a rewrite of just about everything from hd.c, though some original
  *  code is still sprinkled about.  Think of it as a major evolution, with
  *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
- *
- *  Version 1.0 ALPHA	initial code, primary i/f working okay
- *  Version 1.3 BETA	dual i/f on shared irq tested & working!
- *  Version 1.4 BETA	added auto probing for irq(s)
- *  Version 1.5 BETA	added ALPHA (untested) support for IDE cd-roms,
- *  ...
- * Version 5.50		allow values as small as 20 for idebus=
- * Version 5.51		force non io_32bit in drive_cmd_intr()
- *			change delay_10ms() to delay_50ms() to fix problems
- * Version 5.52		fix incorrect invalidation of removable devices
- *			add "hdx=slow" command line option
- * Version 5.60		start to modularize the driver; the disk and ATAPI
- *			 drivers can be compiled as loadable modules.
- *			move IDE probe code to ide-probe.c
- *			move IDE disk code to ide-disk.c
- *			add support for generic IDE device subdrivers
- *			add m68k code from Geert Uytterhoeven
- *			probe all interfaces by default
- *			add ioctl to (re)probe an interface
- * Version 6.00		use per device request queues
- *			attempt to optimize shared hwgroup performance
- *			add ioctl to manually adjust bandwidth algorithms
- *			add kerneld support for the probe module
- *			fix bug in ide_error()
- *			fix bug in the first ide_get_lock() call for Atari
- *			don't flush leftover data for ATAPI devices
- * Version 6.01		clear hwgroup->active while the hwgroup sleeps
- *			support HDIO_GETGEO for floppies
- * Version 6.02		fix ide_ack_intr() call
- *			check partition table on floppies
- * Version 6.03		handle bad status bit sequencing in ide_wait_stat()
- * Version 6.10		deleted old entries from this list of updates
- *			replaced triton.c with ide-dma.c generic PCI DMA
- *			added support for BIOS-enabled UltraDMA
- *			rename all "promise" things to "pdc4030"
- *			fix EZ-DRIVE handling on small disks
- * Version 6.11		fix probe error in ide_scan_devices()
- *			fix ancient "jiffies" polling bugs
- *			mask all hwgroup interrupts on each irq entry
- * Version 6.12		integrate ioctl and proc interfaces
- *			fix parsing of "idex=" command line parameter
- * Version 6.13		add support for ide4/ide5 courtesy rjones@orchestream.com
- * Version 6.14		fixed IRQ sharing among PCI devices
- * Version 6.15		added SMP awareness to IDE drivers
- * Version 6.16		fixed various bugs; even more SMP friendly
- * Version 6.17		fix for newest EZ-Drive problem
- * Version 6.18		default unpartitioned-disk translation now "BIOS LBA"
- * Version 6.19		Re-design for a UNIFORM driver for all platforms,
- *			  model based on suggestions from Russell King and
- *			  Geert Uytterhoeven
- *			Promise DC4030VL now supported.
- *			add support for ide6/ide7
- *			delay_50ms() changed to ide_delay_50ms() and exported.
- * Version 6.20		Added/Fixed Generic ATA-66 support and hwif detection.
- *			Added hdx=flash to allow for second flash disk
- *			  detection w/o the hang loop.
- *			Added support for ide8/ide9
- *			Added idex=ata66 for the quirky chipsets that are
- *			  ATA-66 compliant, but have yet to determine a method
- *			  of verification of the 80c cable presence.
- *			  Specifically Promise's PDC20262 chipset.
- * Version 6.21		Fixing/Fixed SMP spinlock issue with insight from an old
- *			  hat that clarified original low level driver design.
- * Version 6.30		Added SMP support; fixed multmode issues.  -ml
- * Version 6.31		Debug Share INTR's and request queue streaming
- *			Native ATA-100 support
- *			Prep for Cascades Project
- * Version 7.00alpha	First named revision of ide rearrange
- *
- *  Some additional driver compile-time options are in ./include/linux/ide.h
- *
- *  To do, in likely order of completion:
- *	- modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
- *
  */
 
 #define	REVISION	"Revision: 7.00alpha2"
@@ -455,6 +377,10 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 	hwif->straight8			= tmp_hwif->straight8;
 	hwif->bus_state			= tmp_hwif->bus_state;
 
+	hwif->host_flags		= tmp_hwif->host_flags;
+
+	hwif->pio_mask			= tmp_hwif->pio_mask;
+
 	hwif->atapi_dma			= tmp_hwif->atapi_dma;
 	hwif->ultra_mask		= tmp_hwif->ultra_mask;
 	hwif->mwdma_mask		= tmp_hwif->mwdma_mask;
@@ -470,8 +396,9 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 	hwif->cds			= tmp_hwif->cds;
 #endif
 
-	hwif->tuneproc			= tmp_hwif->tuneproc;
+	hwif->set_pio_mode		= tmp_hwif->set_pio_mode;
 	hwif->speedproc			= tmp_hwif->speedproc;
+	hwif->mdma_filter		= tmp_hwif->mdma_filter;
 	hwif->udma_filter		= tmp_hwif->udma_filter;
 	hwif->selectproc		= tmp_hwif->selectproc;
 	hwif->reset_poll		= tmp_hwif->reset_poll;
@@ -940,8 +867,9 @@ int set_pio_mode(ide_drive_t *drive, int arg)
 	if (arg < 0 || arg > 255)
 		return -EINVAL;
 
-	if (!HWIF(drive)->tuneproc)
+	if (drive->hwif->set_pio_mode == NULL)
 		return -ENOSYS;
+
 	if (drive->special.b.set_tune)
 		return -EBUSY;
 	ide_init_drive_cmd(&rq);
@@ -988,6 +916,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 	struct request rq;
 	struct request_pm_state rqpm;
 	ide_task_t args;
+	int ret;
 
 	/* Call ACPI _GTM only once */
 	if (!(drive->dn % 2))
@@ -1004,7 +933,14 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 		mesg.event = PM_EVENT_FREEZE;
 	rqpm.pm_state = mesg.event;
 
-	return ide_do_drive_cmd(drive, &rq, ide_wait);
+	ret = ide_do_drive_cmd(drive, &rq, ide_wait);
+	/* only call ACPI _PS3 after both drivers are suspended */
+	if (!ret && (((drive->dn % 2) && hwif->drives[0].present
+		 && hwif->drives[1].present)
+		 || !hwif->drives[0].present
+		 || !hwif->drives[1].present))
+		ide_acpi_set_state(hwif, 0);
+	return ret;
 }
 
 static int generic_ide_resume(struct device *dev)
@@ -1017,8 +953,10 @@ static int generic_ide_resume(struct device *dev)
 	int err;
 
 	/* Call ACPI _STM only once */
-	if (!(drive->dn % 2))
+	if (!(drive->dn % 2)) {
+		ide_acpi_set_state(hwif, 1);
 		ide_acpi_push_timing(hwif);
+	}
 
 	ide_acpi_exec_tfs(drive);
 
@@ -1171,10 +1109,6 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
 			return 0;
 		}
 
-		case CDROMEJECT:
-		case CDROMCLOSETRAY:
-			return scsi_cmd_ioctl(file, bdev->bd_disk->queue, bdev->bd_disk, cmd, p);
-
 		case HDIO_GET_BUSSTATE:
 			if (!capable(CAP_SYS_ADMIN))
 				return -EACCES;
@@ -1729,20 +1663,13 @@ static struct device_attribute ide_dev_attrs[] = {
 	__ATTR_NULL
 };
 
-static int ide_uevent(struct device *dev, char **envp, int num_envp,
-		      char *buffer, int buffer_size)
+static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	ide_drive_t *drive = to_ide_device(dev);
-	int i = 0;
-	int length = 0;
-
-	add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
-		       "MEDIA=%s", media_string(drive));
-	add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
-		       "DRIVENAME=%s", drive->name);
-	add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
-		       "MODALIAS=ide:m-%s", media_string(drive));
-	envp[i] = NULL;
+
+	add_uevent_var(env, "MEDIA=%s", media_string(drive));
+	add_uevent_var(env, "DRIVENAME=%s", drive->name);
+	add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive));
 	return 0;
 }