ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 472 deletions

diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
deleted file mode 100644
index cb199c815b5..00000000000
--- a/drivers/ide/legacy/ide-cs.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*======================================================================
-
-    A driver for PCMCIA IDE/ATA disk cards
-
-    The contents of this file are subject to the Mozilla Public
-    License Version 1.1 (the "License"); you may not use this file
-    except in compliance with the License. You may obtain a copy of
-    the License at http://www.mozilla.org/MPL/
-
-    Software distributed under the License is distributed on an "AS
-    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-    implied. See the License for the specific language governing
-    rights and limitations under the License.
-
-    The initial developer of the original code is David A. Hinds
-    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
-
-    Alternatively, the contents of this file may be used under the
-    terms of the GNU General Public License version 2 (the "GPL"), in
-    which case the provisions of the GPL are applicable instead of the
-    above.  If you wish to allow the use of your version of this file
-    only under the terms of the GPL and not to allow others to use
-    your version of this file under the MPL, indicate your decision
-    by deleting the provisions above and replace them with the notice
-    and other provisions required by the GPL.  If you do not delete
-    the provisions above, a recipient may use your version of this
-    file under either the MPL or the GPL.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/ide.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-
-#define DRV_NAME "ide-cs"
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
-MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
-MODULE_LICENSE("Dual MPL/GPL");
-
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-#ifdef CONFIG_PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
-
-/*====================================================================*/
-
-typedef struct ide_info_t {
-	struct pcmcia_device	*p_dev;
-	struct ide_host		*host;
-    int		ndev;
-    dev_node_t	node;
-} ide_info_t;
-
-static void ide_release(struct pcmcia_device *);
-static int ide_config(struct pcmcia_device *);
-
-static void ide_detach(struct pcmcia_device *p_dev);
-
-
-
-
-/*======================================================================
-
-    ide_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
-static int ide_probe(struct pcmcia_device *link)
-{
-    ide_info_t *info;
-
-    DEBUG(0, "ide_attach()\n");
-
-    /* Create new ide device */
-    info = kzalloc(sizeof(*info), GFP_KERNEL);
-    if (!info)
-	return -ENOMEM;
-
-    info->p_dev = link;
-    link->priv = info;
-
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-    link->io.IOAddrLines = 3;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-
-    return ide_config(link);
-} /* ide_attach */
-
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
-static void ide_detach(struct pcmcia_device *link)
-{
-    ide_info_t *info = link->priv;
-    ide_hwif_t *hwif = info->host->ports[0];
-    unsigned long data_addr, ctl_addr;
-
-    DEBUG(0, "ide_detach(0x%p)\n", link);
-
-    data_addr = hwif->io_ports.data_addr;
-    ctl_addr  = hwif->io_ports.ctl_addr;
-
-    ide_release(link);
-
-    release_region(ctl_addr, 1);
-    release_region(data_addr, 8);
-
-    kfree(info);
-} /* ide_detach */
-
-static const struct ide_port_ops idecs_port_ops = {
-	.quirkproc		= ide_undecoded_slave,
-};
-
-static const struct ide_port_info idecs_port_info = {
-	.port_ops		= &idecs_port_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-};
-
-static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
-				unsigned long irq, struct pcmcia_device *handle)
-{
-    struct ide_host *host;
-    ide_hwif_t *hwif;
-    int i, rc;
-    hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
-    if (!request_region(io, 8, DRV_NAME)) {
-	printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
-			DRV_NAME, io, io + 7);
-	return NULL;
-    }
-
-    if (!request_region(ctl, 1, DRV_NAME)) {
-	printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
-			DRV_NAME, ctl);
-	release_region(io, 8);
-	return NULL;
-    }
-
-    memset(&hw, 0, sizeof(hw));
-    ide_std_init_ports(&hw, io, ctl);
-    hw.irq = irq;
-    hw.chipset = ide_pci;
-    hw.dev = &handle->dev;
-
-    rc = ide_host_add(&idecs_port_info, hws, &host);
-    if (rc)
-	goto out_release;
-
-    hwif = host->ports[0];
-
-    if (hwif->present)
-	return host;
-
-    /* retry registration in case device is still spinning up */
-    for (i = 0; i < 10; i++) {
-	msleep(100);
-	ide_port_scan(hwif);
-	if (hwif->present)
-	    return host;
-    }
-
-    return host;
-
-out_release:
-    release_region(ctl, 1);
-    release_region(io, 8);
-    return NULL;
-}
-
-/*======================================================================
-
-    ide_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ide device available to the system.
-
-======================================================================*/
-
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-struct pcmcia_config_check {
-	unsigned long ctl_base;
-	int skip_vcc;
-	int is_kme;
-};
-
-static int pcmcia_check_one_config(struct pcmcia_device *pdev,
-				   cistpl_cftable_entry_t *cfg,
-				   cistpl_cftable_entry_t *dflt,
-				   unsigned int vcc,
-				   void *priv_data)
-{
-	struct pcmcia_config_check *stk = priv_data;
-
-	/* Check for matching Vcc, unless we're desperate */
-	if (!stk->skip_vcc) {
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		}
-	}
-
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		pdev->conf.ConfigIndex = cfg->index;
-		pdev->io.BasePort1 = io->win[0].base;
-		pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		if (io->nwin == 2) {
-			pdev->io.NumPorts1 = 8;
-			pdev->io.BasePort2 = io->win[1].base;
-			pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort2;
-		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-			pdev->io.NumPorts1 = io->win[0].len;
-			pdev->io.NumPorts2 = 0;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort1 + 0x0e;
-		} else
-			return -ENODEV;
-		/* If we've got this far, we're done */
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static int ide_config(struct pcmcia_device *link)
-{
-    ide_info_t *info = link->priv;
-    struct pcmcia_config_check *stk = NULL;
-    int last_ret = 0, last_fn = 0, is_kme = 0;
-    unsigned long io_base, ctl_base;
-    struct ide_host *host;
-
-    DEBUG(0, "ide_config(0x%p)\n", link);
-
-    is_kme = ((link->manf_id == MANFID_KME) &&
-	      ((link->card_id == PRODID_KME_KXLC005_A) ||
-	       (link->card_id == PRODID_KME_KXLC005_B)));
-
-    stk = kzalloc(sizeof(*stk), GFP_KERNEL);
-    if (!stk)
-	    goto err_mem;
-    stk->is_kme = is_kme;
-    stk->skip_vcc = io_base = ctl_base = 0;
-
-    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
-	    stk->skip_vcc = 1;
-	    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
-		    goto failed; /* No suitable config found */
-    }
-    io_base = link->io.BasePort1;
-    ctl_base = stk->ctl_base;
-
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
-
-    /* disable drive interrupts during IDE probe */
-    outb(0x02, ctl_base);
-
-    /* special setup for KXLC005 card */
-    if (is_kme)
-	outb(0x81, ctl_base+1);
-
-     host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
-     if (host == NULL && link->io.NumPorts1 == 0x20) {
-	    outb(0x02, ctl_base + 0x10);
-	    host = idecs_register(io_base + 0x10, ctl_base + 0x10,
-				  link->irq.AssignedIRQ, link);
-    }
-
-    if (host == NULL)
-	goto failed;
-
-    info->ndev = 1;
-    sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2);
-    info->node.major = host->ports[0]->major;
-    info->node.minor = 0;
-    info->host = host;
-    link->dev_node = &info->node;
-    printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
-	   info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
-
-    kfree(stk);
-    return 0;
-
-err_mem:
-    printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
-    goto failed;
-
-cs_failed:
-    cs_error(link, last_fn, last_ret);
-failed:
-    kfree(stk);
-    ide_release(link);
-    return -ENODEV;
-} /* ide_config */
-
-/*======================================================================
-
-    After a card is removed, ide_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
-static void ide_release(struct pcmcia_device *link)
-{
-    ide_info_t *info = link->priv;
-    struct ide_host *host = info->host;
-
-    DEBUG(0, "ide_release(0x%p)\n", link);
-
-    if (info->ndev)
-	/* FIXME: if this fails we need to queue the cleanup somehow
-	   -- need to investigate the required PCMCIA magic */
-	ide_host_remove(host);
-
-    info->ndev = 0;
-
-    pcmcia_disable_device(link);
-} /* ide_release */
-
-
-/*======================================================================
-
-    The card status event handler.  Mostly, this schedules other
-    stuff to run after an event is received.  A CARD_REMOVAL event
-    also sets some flags to discourage the ide drivers from
-    talking to the ports.
-
-======================================================================*/
-
-static struct pcmcia_device_id ide_ids[] = {
-	PCMCIA_DEVICE_FUNC_ID(4),
-	PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000),	/* Corsair */
-	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
-	PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000),	/* I-O Data CFA */
-	PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),	/* Mitsubishi CFA */
-	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
-	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
-	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	/* SanDisk CFA */
-	PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000),	/* Kingston */
-	PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), 	/* TI emulated */
-	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
-	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
-	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
-	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
-	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
-	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100),	/* Viking CFA */
-	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar, Viking CFA */
-	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
-	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
-	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
-	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
-	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
-	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
-	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
-	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
-	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
-	PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
-	PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
-	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
-	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
-	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
-	PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
-	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
-	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
-	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
-	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
-	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
-	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
-	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
-	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
-	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
-	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
-	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
-	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
-	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
-	PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
-	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
-	PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
-	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
-	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
-	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
-	PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
-	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
-	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
-	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, ide_ids);
-
-static struct pcmcia_driver ide_cs_driver = {
-	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "ide-cs",
-	},
-	.probe		= ide_probe,
-	.remove		= ide_detach,
-	.id_table       = ide_ids,
-};
-
-static int __init init_ide_cs(void)
-{
-	return pcmcia_register_driver(&ide_cs_driver);
-}
-
-static void __exit exit_ide_cs(void)
-{
-	pcmcia_unregister_driver(&ide_cs_driver);
-}
-
-late_initcall(init_ide_cs);
-module_exit(exit_ide_cs);