ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

15 files changed, 0 insertions, 3079 deletions

diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile
deleted file mode 100644
index 6939329f89e..00000000000
--- a/drivers/ide/legacy/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-
-# link order is important here
-
-obj-$(CONFIG_BLK_DEV_ALI14XX)		+= ali14xx.o
-obj-$(CONFIG_BLK_DEV_UMC8672)		+= umc8672.o
-obj-$(CONFIG_BLK_DEV_DTC2278)		+= dtc2278.o
-obj-$(CONFIG_BLK_DEV_HT6560B)		+= ht6560b.o
-obj-$(CONFIG_BLK_DEV_QD65XX)		+= qd65xx.o
-obj-$(CONFIG_BLK_DEV_4DRIVES)		+= ide-4drives.o
-
-obj-$(CONFIG_BLK_DEV_GAYLE)		+= gayle.o
-obj-$(CONFIG_BLK_DEV_FALCON_IDE)	+= falconide.o
-obj-$(CONFIG_BLK_DEV_MAC_IDE)		+= macide.o
-obj-$(CONFIG_BLK_DEV_Q40IDE)		+= q40ide.o
-obj-$(CONFIG_BLK_DEV_BUDDHA)		+= buddha.o
-
-ifeq ($(CONFIG_BLK_DEV_IDECS), m)
-	obj-m += ide-cs.o
-endif
-
-ifeq ($(CONFIG_BLK_DEV_PLATFORM), m)
-	obj-m += ide_platform.o
-endif
-
-EXTRA_CFLAGS	:= -Idrivers/ide
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
deleted file mode 100644
index 90da1f953ed..00000000000
--- a/drivers/ide/legacy/ali14xx.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- *  Copyright (C) 1996  Linus Torvalds & author (see below)
- */
-
-/*
- * ALI M14xx chipset EIDE controller
- *
- * Works for ALI M1439/1443/1445/1487/1489 chipsets.
- *
- * Adapted from code developed by derekn@vw.ece.cmu.edu.  -ml
- * Derek's notes follow:
- *
- * I think the code should be pretty understandable,
- * but I'll be happy to (try to) answer questions.
- *
- * The critical part is in the setupDrive function.  The initRegisters
- * function doesn't seem to be necessary, but the DOS driver does it, so
- * I threw it in.
- *
- * I've only tested this on my system, which only has one disk.  I posted
- * it to comp.sys.linux.hardware, so maybe some other people will try it
- * out.
- *
- * Derek Noonburg  (derekn@ece.cmu.edu)
- * 95-sep-26
- *
- * Update 96-jul-13:
- *
- * I've since upgraded to two disks and a CD-ROM, with no trouble, and
- * I've also heard from several others who have used it successfully.
- * This driver appears to work with both the 1443/1445 and the 1487/1489
- * chipsets.  I've added support for PIO mode 4 for the 1487.  This
- * seems to work just fine on the 1443 also, although I'm not sure it's
- * advertised as supporting mode 4.  (I've been running a WDC AC21200 in
- * mode 4 for a while now with no trouble.)  -Derek
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "ali14xx"
-
-/* port addresses for auto-detection */
-#define ALI_NUM_PORTS 4
-static const int ports[ALI_NUM_PORTS] __initdata =
-	{ 0x074, 0x0f4, 0x034, 0x0e4 };
-
-/* register initialization data */
-typedef struct { u8 reg, data; } RegInitializer;
-
-static const RegInitializer initData[] __initdata = {
-	{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
-	{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
-	{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
-	{0x29, 0x00}, {0x2a, 0x00}, {0x2f, 0x00}, {0x2b, 0x00},
-	{0x2c, 0x00}, {0x2d, 0x00}, {0x2e, 0x00}, {0x30, 0x00},
-	{0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00}, {0x34, 0xff},
-	{0x35, 0x03}, {0x00, 0x00}
-};
-
-/* timing parameter registers for each drive */
-static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
-	{0x03, 0x26, 0x04, 0x27},     /* drive 0 */
-	{0x05, 0x28, 0x06, 0x29},     /* drive 1 */
-	{0x2b, 0x30, 0x2c, 0x31},     /* drive 2 */
-	{0x2d, 0x32, 0x2e, 0x33},     /* drive 3 */
-};
-
-static int basePort;	/* base port address */
-static int regPort;	/* port for register number */
-static int dataPort;	/* port for register data */
-static u8 regOn;	/* output to base port to access registers */
-static u8 regOff;	/* output to base port to close registers */
-
-/*------------------------------------------------------------------------*/
-
-/*
- * Read a controller register.
- */
-static inline u8 inReg(u8 reg)
-{
-	outb_p(reg, regPort);
-	return inb(dataPort);
-}
-
-/*
- * Write a controller register.
- */
-static void outReg(u8 data, u8 reg)
-{
-	outb_p(reg, regPort);
-	outb_p(data, dataPort);
-}
-
-static DEFINE_SPINLOCK(ali14xx_lock);
-
-/*
- * Set PIO mode for the specified drive.
- * This function computes timing parameters
- * and sets controller registers accordingly.
- */
-static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	int driveNum;
-	int time1, time2;
-	u8 param1, param2, param3, param4;
-	unsigned long flags;
-	int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
-	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-
-	/* calculate timing, according to PIO mode */
-	time1 = ide_pio_cycle_time(drive, pio);
-	time2 = t->active;
-	param3 = param1 = (time2 * bus_speed + 999) / 1000;
-	param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
-	if (pio < 3) {
-		param3 += 8;
-		param4 += 8;
-	}
-	printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
-		drive->name, pio, time1, time2, param1, param2, param3, param4);
-
-	/* stuff timing parameters into controller registers */
-	driveNum = (drive->hwif->index << 1) + (drive->dn & 1);
-	spin_lock_irqsave(&ali14xx_lock, flags);
-	outb_p(regOn, basePort);
-	outReg(param1, regTab[driveNum].reg1);
-	outReg(param2, regTab[driveNum].reg2);
-	outReg(param3, regTab[driveNum].reg3);
-	outReg(param4, regTab[driveNum].reg4);
-	outb_p(regOff, basePort);
-	spin_unlock_irqrestore(&ali14xx_lock, flags);
-}
-
-/*
- * Auto-detect the IDE controller port.
- */
-static int __init findPort(void)
-{
-	int i;
-	u8 t;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (i = 0; i < ALI_NUM_PORTS; ++i) {
-		basePort = ports[i];
-		regOff = inb(basePort);
-		for (regOn = 0x30; regOn <= 0x33; ++regOn) {
-			outb_p(regOn, basePort);
-			if (inb(basePort) == regOn) {
-				regPort = basePort + 4;
-				dataPort = basePort + 8;
-				t = inReg(0) & 0xf0;
-				outb_p(regOff, basePort);
-				local_irq_restore(flags);
-				if (t != 0x50)
-					return 0;
-				return 1;  /* success */
-			}
-		}
-		outb_p(regOff, basePort);
-	}
-	local_irq_restore(flags);
-	return 0;
-}
-
-/*
- * Initialize controller registers with default values.
- */
-static int __init initRegisters(void)
-{
-	const RegInitializer *p;
-	u8 t;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb_p(regOn, basePort);
-	for (p = initData; p->reg != 0; ++p)
-		outReg(p->data, p->reg);
-	outb_p(0x01, regPort);
-	t = inb(regPort) & 0x01;
-	outb_p(regOff, basePort);
-	local_irq_restore(flags);
-	return t;
-}
-
-static const struct ide_port_ops ali14xx_port_ops = {
-	.set_pio_mode		= ali14xx_set_pio_mode,
-};
-
-static const struct ide_port_info ali14xx_port_info = {
-	.name			= DRV_NAME,
-	.chipset		= ide_ali14xx,
-	.port_ops		= &ali14xx_port_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-	.pio_mask		= ATA_PIO4,
-};
-
-static int __init ali14xx_probe(void)
-{
-	printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
-			  basePort, regOn);
-
-	/* initialize controller registers */
-	if (!initRegisters()) {
-		printk(KERN_ERR "ali14xx: Chip initialization failed.\n");
-		return 1;
-	}
-
-	return ide_legacy_device_add(&ali14xx_port_info, 0);
-}
-
-static int probe_ali14xx;
-
-module_param_named(probe, probe_ali14xx, bool, 0);
-MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
-
-static int __init ali14xx_init(void)
-{
-	if (probe_ali14xx == 0)
-		goto out;
-
-	/* auto-detect IDE controller port */
-	if (findPort()) {
-		if (ali14xx_probe())
-			return -ENODEV;
-		return 0;
-	}
-	printk(KERN_ERR "ali14xx: not found.\n");
-out:
-	return -ENODEV;
-}
-
-module_init(ali14xx_init);
-
-MODULE_AUTHOR("see local file");
-MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
deleted file mode 100644
index c5a3c9ef6a5..00000000000
--- a/drivers/ide/legacy/buddha.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- *  Amiga Buddha, Catweasel and X-Surf IDE Driver
- *
- *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
- *
- *  This driver was written based on the specifications in README.buddha and
- *  the X-Surf info from Inside_XSurf.txt available at
- *  http://www.jschoenfeld.com
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- *
- *  TODO:
- *    - test it :-)
- *    - tune the timings using the speed-register
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/zorro.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-
-
-    /*
-     *  The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
-     */
-
-#define BUDDHA_NUM_HWIFS	2
-#define CATWEASEL_NUM_HWIFS	3
-#define XSURF_NUM_HWIFS         2
-
-#define MAX_NUM_HWIFS		3
-
-    /*
-     *  Bases of the IDE interfaces (relative to the board address)
-     */
-
-#define BUDDHA_BASE1	0x800
-#define BUDDHA_BASE2	0xa00
-#define BUDDHA_BASE3	0xc00
-
-#define XSURF_BASE1     0xb000 /* 2.5" Interface */
-#define XSURF_BASE2     0xd000 /* 3.5" Interface */
-
-static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
-    BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
-};
-
-static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
-     XSURF_BASE1, XSURF_BASE2
-};
-
-    /*
-     *  Offsets from one of the above bases
-     */
-
-#define BUDDHA_CONTROL	0x11a
-
-    /*
-     *  Other registers
-     */
-
-#define BUDDHA_IRQ1	0xf00		/* MSB = 1, Harddisk is source of */
-#define BUDDHA_IRQ2	0xf40		/* interrupt */
-#define BUDDHA_IRQ3	0xf80
-
-#define XSURF_IRQ1      0x7e
-#define XSURF_IRQ2      0x7e
-
-static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
-    BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
-};
-
-static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
-    XSURF_IRQ1, XSURF_IRQ2
-};
-
-#define BUDDHA_IRQ_MR	0xfc0		/* master interrupt enable */
-
-
-    /*
-     *  Board information
-     */
-
-typedef enum BuddhaType_Enum {
-    BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
-} BuddhaType;
-
-static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
-
-    /*
-     *  Check and acknowledge the interrupt status
-     */
-
-static int buddha_ack_intr(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & 0x80))
-	    return 0;
-    return 1;
-}
-
-static int xsurf_ack_intr(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports.irq_addr);
-    /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
-    z_writeb(0, hwif->io_ports.irq_addr);
-    if (!(ch & 0x80))
-	    return 0;
-    return 1;
-}
-
-static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
-				      unsigned long ctl, unsigned long irq_port,
-				      ide_ack_intr_t *ack_intr)
-{
-	int i;
-
-	memset(hw, 0, sizeof(*hw));
-
-	hw->io_ports.data_addr = base;
-
-	for (i = 1; i < 8; i++)
-		hw->io_ports_array[i] = base + 2 + i * 4;
-
-	hw->io_ports.ctl_addr = ctl;
-	hw->io_ports.irq_addr = irq_port;
-
-	hw->irq = IRQ_AMIGA_PORTS;
-	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
-}
-
-    /*
-     *  Probe for a Buddha or Catweasel IDE interface
-     */
-
-static int __init buddha_init(void)
-{
-	struct zorro_dev *z = NULL;
-	u_long buddha_board = 0;
-	BuddhaType type;
-	int buddha_num_hwifs, i;
-
-	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
-		unsigned long board;
-		hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
-
-		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
-			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
-			type=BOARD_BUDDHA;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
-			buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
-			type=BOARD_CATWEASEL;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
-			buddha_num_hwifs = XSURF_NUM_HWIFS;
-			type=BOARD_XSURF;
-		} else 
-			continue;
-		
-		board = z->resource.start;
-
-/*
- * FIXME: we now have selectable mmio v/s iomio transports.
- */
-
-		if(type != BOARD_XSURF) {
-			if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
-				continue;
-		} else {
-			if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
-				continue;
-			if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
-				goto fail_base2;
-			if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) {
-				release_mem_region(board+XSURF_BASE2, 0x1000);
-fail_base2:
-				release_mem_region(board+XSURF_BASE1, 0x1000);
-				continue;
-			}
-		}	  
-		buddha_board = ZTWO_VADDR(board);
-		
-		/* write to BUDDHA_IRQ_MR to enable the board IRQ */
-		/* X-Surf doesn't have this.  IRQs are always on */
-		if (type != BOARD_XSURF)
-			z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
-
-		printk(KERN_INFO "ide: %s IDE controller\n",
-				 buddha_board_name[type]);
-
-		for (i = 0; i < buddha_num_hwifs; i++) {
-			unsigned long base, ctl, irq_port;
-			ide_ack_intr_t *ack_intr;
-
-			if (type != BOARD_XSURF) {
-				base = buddha_board + buddha_bases[i];
-				ctl = base + BUDDHA_CONTROL;
-				irq_port = buddha_board + buddha_irqports[i];
-				ack_intr = buddha_ack_intr;
-			} else {
-				base = buddha_board + xsurf_bases[i];
-				/* X-Surf has no CS1* (Control/AltStat) */
-				ctl = 0;
-				irq_port = buddha_board + xsurf_irqports[i];
-				ack_intr = xsurf_ack_intr;
-			}
-
-			buddha_setup_ports(&hw[i], base, ctl, irq_port,
-					   ack_intr);
-
-			hws[i] = &hw[i];
-		}
-
-		ide_host_add(NULL, hws, NULL);
-	}
-
-	return 0;
-}
-
-module_init(buddha_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
deleted file mode 100644
index 689b2e49341..00000000000
--- a/drivers/ide/legacy/dtc2278.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  Copyright (C) 1996  Linus Torvalds & author (see below)
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "dtc2278"
-
-/*
- * Changing this #undef to #define may solve start up problems in some systems.
- */
-#undef ALWAYS_SET_DTC2278_PIO_MODE
-
-/*
- * From: andy@cercle.cts.com (Dyan Wile)
- *
- * Below is a patch for DTC-2278 - alike software-programmable controllers
- * The code enables the secondary IDE controller and the PIO4 (3?) timings on
- * the primary (EIDE). You may probably have to enable the 32-bit support to
- * get the full speed. You better get the disk interrupts disabled ( hdparm -u0
- * /dev/hd.. ) for the drives connected to the EIDE interface. (I get my
- * filesystem  corrupted with -u1, but under heavy disk load only :-)
- *
- * This card is now forced to use the "serialize" feature,
- * and irq-unmasking is disallowed.  If io_32bit is enabled,
- * it must be done for BOTH drives on each interface.
- *
- * This code was written for the DTC2278E, but might work with any of these:
- *
- * DTC2278S has only a single IDE interface.
- * DTC2278D has two IDE interfaces and is otherwise identical to the S version.
- * DTC2278E also has serial ports and a printer port
- * DTC2278EB: has onboard BIOS, and "works like a charm" -- Kent Bradford <kent@theory.caltech.edu>
- *
- * There may be a fourth controller type. The S and D versions use the
- * Winbond chip, and I think the E version does also.
- *
- */
-
-static void sub22 (char b, char c)
-{
-	int i;
-
-	for(i = 0; i < 3; ++i) {
-		inb(0x3f6);
-		outb_p(b,0xb0);
-		inb(0x3f6);
-		outb_p(c,0xb4);
-		inb(0x3f6);
-		if(inb(0xb4) == c) {
-			outb_p(7,0xb0);
-			inb(0x3f6);
-			return;	/* success */
-		}
-	}
-}
-
-static DEFINE_SPINLOCK(dtc2278_lock);
-
-static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	unsigned long flags;
-
-	if (pio >= 3) {
-		spin_lock_irqsave(&dtc2278_lock, flags);
-		/*
-		 * This enables PIO mode4 (3?) on the first interface
-		 */
-		sub22(1,0xc3);
-		sub22(0,0xa0);
-		spin_unlock_irqrestore(&dtc2278_lock, flags);
-	} else {
-		/* we don't know how to set it back again.. */
-		/* Actually we do - there is a data sheet available for the
-		   Winbond but does anyone actually care */
-	}
-}
-
-static const struct ide_port_ops dtc2278_port_ops = {
-	.set_pio_mode		= dtc2278_set_pio_mode,
-};
-
-static const struct ide_port_info dtc2278_port_info __initdata = {
-	.name			= DRV_NAME,
-	.chipset		= ide_dtc2278,
-	.port_ops		= &dtc2278_port_ops,
-	.host_flags		= IDE_HFLAG_SERIALIZE |
-				  IDE_HFLAG_NO_UNMASK_IRQS |
-				  IDE_HFLAG_IO_32BIT |
-				  /* disallow ->io_32bit changes */
-				  IDE_HFLAG_NO_IO_32BIT |
-				  IDE_HFLAG_NO_DMA,
-	.pio_mask		= ATA_PIO4,
-};
-
-static int __init dtc2278_probe(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/*
-	 * This enables the second interface
-	 */
-	outb_p(4,0xb0);
-	inb(0x3f6);
-	outb_p(0x20,0xb4);
-	inb(0x3f6);
-#ifdef ALWAYS_SET_DTC2278_PIO_MODE
-	/*
-	 * This enables PIO mode4 (3?) on the first interface
-	 * and may solve start-up problems for some people.
-	 */
-	sub22(1,0xc3);
-	sub22(0,0xa0);
-#endif
-	local_irq_restore(flags);
-
-	return ide_legacy_device_add(&dtc2278_port_info, 0);
-}
-
-static int probe_dtc2278;
-
-module_param_named(probe, probe_dtc2278, bool, 0);
-MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
-
-static int __init dtc2278_init(void)
-{
-	if (probe_dtc2278 == 0)
-		return -ENODEV;
-
-	if (dtc2278_probe()) {
-		printk(KERN_ERR "dtc2278: ide interfaces already in use!\n");
-		return -EBUSY;
-	}
-	return 0;
-}
-
-module_init(dtc2278_init);
-
-MODULE_AUTHOR("See Local File");
-MODULE_DESCRIPTION("support of DTC-2278 VLB IDE chipsets");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
deleted file mode 100644
index 39d500d84b0..00000000000
--- a/drivers/ide/legacy/falconide.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  Atari Falcon IDE Driver
- *
- *     Created 12 Jul 1997 by Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_stdma.h>
-
-#define DRV_NAME "falconide"
-
-    /*
-     *  Base of the IDE interface
-     */
-
-#define ATA_HD_BASE	0xfff00000
-
-    /*
-     *  Offsets from the above base
-     */
-
-#define ATA_HD_CONTROL	0x39
-
-    /*
-     *  falconide_intr_lock is used to obtain access to the IDE interrupt,
-     *  which is shared between several drivers.
-     */
-
-int falconide_intr_lock;
-EXPORT_SYMBOL(falconide_intr_lock);
-
-static void falconide_input_data(ide_drive_t *drive, struct request *rq,
-				 void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
-		return insw(data_addr, buf, (len + 1) / 2);
-
-	insw_swapw(data_addr, buf, (len + 1) / 2);
-}
-
-static void falconide_output_data(ide_drive_t *drive, struct request *rq,
-				  void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
-		return outsw(data_addr, buf, (len + 1) / 2);
-
-	outsw_swapw(data_addr, buf, (len + 1) / 2);
-}
-
-/* Atari has a byte-swapped IDE interface */
-static const struct ide_tp_ops falconide_tp_ops = {
-	.exec_command		= ide_exec_command,
-	.read_status		= ide_read_status,
-	.read_altstatus		= ide_read_altstatus,
-	.read_sff_dma_status	= ide_read_sff_dma_status,
-
-	.set_irq		= ide_set_irq,
-
-	.tf_load		= ide_tf_load,
-	.tf_read		= ide_tf_read,
-
-	.input_data		= falconide_input_data,
-	.output_data		= falconide_output_data,
-};
-
-static const struct ide_port_info falconide_port_info = {
-	.tp_ops			= &falconide_tp_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-};
-
-static void __init falconide_setup_ports(hw_regs_t *hw)
-{
-	int i;
-
-	memset(hw, 0, sizeof(*hw));
-
-	hw->io_ports.data_addr = ATA_HD_BASE;
-
-	for (i = 1; i < 8; i++)
-		hw->io_ports_array[i] = ATA_HD_BASE + 1 + i * 4;
-
-	hw->io_ports.ctl_addr = ATA_HD_BASE + ATA_HD_CONTROL;
-
-	hw->irq = IRQ_MFP_IDE;
-	hw->ack_intr = NULL;
-
-	hw->chipset = ide_generic;
-}
-
-    /*
-     *  Probe for a Falcon IDE interface
-     */
-
-static int __init falconide_init(void)
-{
-	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	int rc;
-
-	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
-		return -ENODEV;
-
-	printk(KERN_INFO "ide: Falcon IDE controller\n");
-
-	if (!request_mem_region(ATA_HD_BASE, 0x40, DRV_NAME)) {
-		printk(KERN_ERR "%s: resources busy\n", DRV_NAME);
-		return -EBUSY;
-	}
-
-	falconide_setup_ports(&hw);
-
-	host = ide_host_alloc(&falconide_port_info, hws);
-	if (host == NULL) {
-		rc = -ENOMEM;
-		goto err;
-	}
-
-	ide_get_lock(NULL, NULL);
-	rc = ide_host_register(host, &falconide_port_info, hws);
-	ide_release_lock();
-
-	if (rc)
-		goto err_free;
-
-	return 0;
-err_free:
-	ide_host_free(host);
-err:
-	release_mem_region(ATA_HD_BASE, 0x40);
-	return rc;
-}
-
-module_init(falconide_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
deleted file mode 100644
index 69150688656..00000000000
--- a/drivers/ide/legacy/gayle.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- *  Amiga Gayle IDE Driver
- *
- *     Created 9 Jul 1997 by Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/zorro.h>
-#include <linux/module.h>
-
-#include <asm/setup.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amigayle.h>
-
-
-    /*
-     *  Bases of the IDE interfaces
-     */
-
-#define GAYLE_BASE_4000	0xdd2020	/* A4000/A4000T */
-#define GAYLE_BASE_1200	0xda0000	/* A1200/A600 and E-Matrix 530 */
-
-#define GAYLE_IDEREG_SIZE	0x2000
-
-    /*
-     *  Offsets from one of the above bases
-     */
-
-#define GAYLE_CONTROL	0x101a
-
-    /*
-     *  These are at different offsets from the base
-     */
-
-#define GAYLE_IRQ_4000	0xdd3020	/* MSB = 1, Harddisk is source of */
-#define GAYLE_IRQ_1200	0xda9000	/* interrupt */
-
-
-    /*
-     *  Offset of the secondary port for IDE doublers
-     *  Note that GAYLE_CONTROL is NOT available then!
-     */
-
-#define GAYLE_NEXT_PORT	0x1000
-
-#ifndef CONFIG_BLK_DEV_IDEDOUBLER
-#define GAYLE_NUM_HWIFS		1
-#define GAYLE_NUM_PROBE_HWIFS	GAYLE_NUM_HWIFS
-#define GAYLE_HAS_CONTROL_REG	1
-#else /* CONFIG_BLK_DEV_IDEDOUBLER */
-#define GAYLE_NUM_HWIFS		2
-#define GAYLE_NUM_PROBE_HWIFS	(ide_doubler ? GAYLE_NUM_HWIFS : \
-					       GAYLE_NUM_HWIFS-1)
-#define GAYLE_HAS_CONTROL_REG	(!ide_doubler)
-
-static int ide_doubler;
-module_param_named(doubler, ide_doubler, bool, 0);
-MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
-#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-
-
-    /*
-     *  Check and acknowledge the interrupt status
-     */
-
-static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & GAYLE_IRQ_IDE))
-	return 0;
-    return 1;
-}
-
-static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & GAYLE_IRQ_IDE))
-	return 0;
-    (void)z_readb(hwif->io_ports.status_addr);
-    z_writeb(0x7c, hwif->io_ports.irq_addr);
-    return 1;
-}
-
-static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
-				     unsigned long ctl, unsigned long irq_port,
-				     ide_ack_intr_t *ack_intr)
-{
-	int i;
-
-	memset(hw, 0, sizeof(*hw));
-
-	hw->io_ports.data_addr = base;
-
-	for (i = 1; i < 8; i++)
-		hw->io_ports_array[i] = base + 2 + i * 4;
-
-	hw->io_ports.ctl_addr = ctl;
-	hw->io_ports.irq_addr = irq_port;
-
-	hw->irq = IRQ_AMIGA_PORTS;
-	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
-}
-
-    /*
-     *  Probe for a Gayle IDE interface (and optionally for an IDE doubler)
-     */
-
-static int __init gayle_init(void)
-{
-    unsigned long phys_base, res_start, res_n;
-    unsigned long base, ctrlport, irqport;
-    ide_ack_intr_t *ack_intr;
-    int a4000, i, rc;
-    hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
-
-    if (!MACH_IS_AMIGA)
-	return -ENODEV;
-
-    if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE))
-	goto found;
-
-#ifdef CONFIG_ZORRO
-    if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE,
-			  NULL))
-	goto found;
-#endif
-    return -ENODEV;
-
-found:
-	printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n",
-			 a4000 ? 4000 : 1200,
-#ifdef CONFIG_BLK_DEV_IDEDOUBLER
-			 ide_doubler ? ", IDE doubler" :
-#endif
-			 "");
-
-	if (a4000) {
-	    phys_base = GAYLE_BASE_4000;
-	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
-	    ack_intr = gayle_ack_intr_a4000;
-	} else {
-	    phys_base = GAYLE_BASE_1200;
-	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
-	    ack_intr = gayle_ack_intr_a1200;
-	}
-/*
- * FIXME: we now have selectable modes between mmio v/s iomio
- */
-
-	res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
-	res_n = GAYLE_IDEREG_SIZE;
-
-	if (!request_mem_region(res_start, res_n, "IDE"))
-		return -EBUSY;
-
-    for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
-	base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
-	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
-
-	gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
-
-	hws[i] = &hw[i];
-    }
-
-    rc = ide_host_add(NULL, hws, NULL);
-    if (rc)
-	release_mem_region(res_start, res_n);
-
-    return rc;
-}
-
-module_init(gayle_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
deleted file mode 100644
index c7e5c2246b7..00000000000
--- a/drivers/ide/legacy/ht6560b.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- *  Copyright (C) 1995-2000  Linus Torvalds & author (see below)
- */
-
-/*
- *  HT-6560B EIDE-controller support
- *  To activate controller support use kernel parameter "ide0=ht6560b".
- *  Use hdparm utility to enable PIO mode support.
- *
- *  Author:    Mikko Ala-Fossi            <maf@iki.fi>
- *             Jan Evert van Grootheest   <j.e.van.grootheest@caiway.nl>
- *
- *  Try:  http://www.maf.iki.fi/~maf/ht6560b/
- */
-
-#define DRV_NAME	"ht6560b"
-#define HT6560B_VERSION "v0.08"
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-/* #define DEBUG */  /* remove comments for DEBUG messages */
-
-/*
- * The special i/o-port that HT-6560B uses to configuration:
- *    bit0 (0x01): "1" selects secondary interface
- *    bit2 (0x04): "1" enables FIFO function
- *    bit5 (0x20): "1" enables prefetched data read function  (???)
- *
- * The special i/o-port that HT-6560A uses to configuration:
- *    bit0 (0x01): "1" selects secondary interface
- *    bit1 (0x02): "1" enables prefetched data read function
- *    bit2 (0x04): "0" enables multi-master system	      (?)
- *    bit3 (0x08): "1" 3 cycle time, "0" 2 cycle time	      (?)
- */
-#define HT_CONFIG_PORT	  0x3e6
-#define HT_CONFIG(drivea) (u8)(((drivea)->drive_data & 0xff00) >> 8)
-/*
- * FIFO + PREFETCH (both a/b-model)
- */
-#define HT_CONFIG_DEFAULT 0x1c /* no prefetch */
-/* #define HT_CONFIG_DEFAULT 0x3c */ /* with prefetch */
-#define HT_SECONDARY_IF	  0x01
-#define HT_PREFETCH_MODE  0x20
-
-/*
- * ht6560b Timing values:
- *
- * I reviewed some assembler source listings of htide drivers and found
- * out how they setup those cycle time interfacing values, as they at Holtek
- * call them. IDESETUP.COM that is supplied with the drivers figures out
- * optimal values and fetches those values to drivers. I found out that
- * they use Select register to fetch timings to the ide board right after
- * interface switching. After that it was quite easy to add code to
- * ht6560b.c.
- *
- * IDESETUP.COM gave me values 0x24, 0x45, 0xaa, 0xff that worked fine
- * for hda and hdc. But hdb needed higher values to work, so I guess
- * that sometimes it is necessary to give higher value than IDESETUP
- * gives.   [see cmd640.c for an extreme example of this. -ml]
- *
- * Perhaps I should explain something about these timing values:
- * The higher nibble of value is the Recovery Time  (rt) and the lower nibble
- * of the value is the Active Time  (at). Minimum value 2 is the fastest and
- * the maximum value 15 is the slowest. Default values should be 15 for both.
- * So 0x24 means 2 for rt and 4 for at. Each of the drives should have
- * both values, and IDESETUP gives automatically rt=15 st=15 for CDROMs or
- * similar. If value is too small there will be all sorts of failures.
- *
- * Timing byte consists of
- *	High nibble:  Recovery Cycle Time  (rt)
- *	     The valid values range from 2 to 15. The default is 15.
- *
- *	Low nibble:   Active Cycle Time	   (at)
- *	     The valid values range from 2 to 15. The default is 15.
- *
- * You can obtain optimized timing values by running Holtek IDESETUP.COM
- * for DOS. DOS drivers get their timing values from command line, where
- * the first value is the Recovery Time and the second value is the
- * Active Time for each drive. Smaller value gives higher speed.
- * In case of failures you should probably fall back to a higher value.
- */
-#define HT_TIMING(drivea) (u8)((drivea)->drive_data & 0x00ff)
-#define HT_TIMING_DEFAULT 0xff
-
-/*
- * This routine handles interface switching for the peculiar hardware design
- * on the F.G.I./Holtek HT-6560B VLB IDE interface.
- * The HT-6560B can only enable one IDE port at a time, and requires a
- * silly sequence (below) whenever we switch between primary and secondary.
- */
-
-/*
- * This routine is invoked from ide.c to prepare for access to a given drive.
- */
-static void ht6560b_selectproc (ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	unsigned long flags;
-	static u8 current_select = 0;
-	static u8 current_timing = 0;
-	u8 select, timing;
-	
-	local_irq_save(flags);
-
-	select = HT_CONFIG(drive);
-	timing = HT_TIMING(drive);
-
-	/*
-	 * Need to enforce prefetch sometimes because otherwise
-	 * it'll hang (hard).
-	 */
-	if (drive->media != ide_disk ||
-	    (drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
-		select |= HT_PREFETCH_MODE;
-
-	if (select != current_select || timing != current_timing) {
-		current_select = select;
-		current_timing = timing;
-		(void)inb(HT_CONFIG_PORT);
-		(void)inb(HT_CONFIG_PORT);
-		(void)inb(HT_CONFIG_PORT);
-		(void)inb(HT_CONFIG_PORT);
-		outb(select, HT_CONFIG_PORT);
-		/*
-		 * Set timing for this drive:
-		 */
-		outb(timing, hwif->io_ports.device_addr);
-		(void)inb(hwif->io_ports.status_addr);
-#ifdef DEBUG
-		printk("ht6560b: %s: select=%#x timing=%#x\n",
-			drive->name, select, timing);
-#endif
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * Autodetection and initialization of ht6560b
- */
-static int __init try_to_init_ht6560b(void)
-{
-	u8 orig_value;
-	int i;
-	
-	/* Autodetect ht6560b */
-	if ((orig_value = inb(HT_CONFIG_PORT)) == 0xff)
-		return 0;
-	
-	for (i=3;i>0;i--) {
-		outb(0x00, HT_CONFIG_PORT);
-		if (!( (~inb(HT_CONFIG_PORT)) & 0x3f )) {
-			outb(orig_value, HT_CONFIG_PORT);
-			return 0;
-		}
-	}
-	outb(0x00, HT_CONFIG_PORT);
-	if ((~inb(HT_CONFIG_PORT))& 0x3f) {
-		outb(orig_value, HT_CONFIG_PORT);
-		return 0;
-	}
-	/*
-	 * Ht6560b autodetected
-	 */
-	outb(HT_CONFIG_DEFAULT, HT_CONFIG_PORT);
-	outb(HT_TIMING_DEFAULT, 0x1f6);	/* Select register */
-	(void)inb(0x1f7);		/* Status register */
-
-	printk("ht6560b " HT6560B_VERSION
-	       ": chipset detected and initialized"
-#ifdef DEBUG
-	       " with debug enabled"
-#endif
-	       "\n"
-		);
-	return 1;
-}
-
-static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio)
-{
-	int active_time, recovery_time;
-	int active_cycles, recovery_cycles;
-	int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
-
-        if (pio) {
-		unsigned int cycle_time;
-		struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-
-		cycle_time = ide_pio_cycle_time(drive, pio);
-
-		/*
-		 *  Just like opti621.c we try to calculate the
-		 *  actual cycle time for recovery and activity
-		 *  according system bus speed.
-		 */
-		active_time = t->active;
-		recovery_time = cycle_time - active_time - t->setup;
-		/*
-		 *  Cycle times should be Vesa bus cycles
-		 */
-		active_cycles   = (active_time   * bus_speed + 999) / 1000;
-		recovery_cycles = (recovery_time * bus_speed + 999) / 1000;
-		/*
-		 *  Upper and lower limits
-		 */
-		if (active_cycles   < 2)  active_cycles   = 2;
-		if (recovery_cycles < 2)  recovery_cycles = 2;
-		if (active_cycles   > 15) active_cycles   = 15;
-		if (recovery_cycles > 15) recovery_cycles = 0;  /* 0==16 */
-		
-#ifdef DEBUG
-		printk("ht6560b: drive %s setting pio=%d recovery=%d (%dns) active=%d (%dns)\n", drive->name, pio, recovery_cycles, recovery_time, active_cycles, active_time);
-#endif
-		
-		return (u8)((recovery_cycles << 4) | active_cycles);
-	} else {
-		
-#ifdef DEBUG
-		printk("ht6560b: drive %s setting pio=0\n", drive->name);
-#endif
-		
-		return HT_TIMING_DEFAULT;    /* default setting */
-	}
-}
-
-static DEFINE_SPINLOCK(ht6560b_lock);
-
-/*
- *  Enable/Disable so called prefetch mode
- */
-static void ht_set_prefetch(ide_drive_t *drive, u8 state)
-{
-	unsigned long flags;
-	int t = HT_PREFETCH_MODE << 8;
-
-	spin_lock_irqsave(&ht6560b_lock, flags);
-
-	/*
-	 *  Prefetch mode and unmask irq seems to conflict
-	 */
-	if (state) {
-		drive->drive_data |= t;   /* enable prefetch mode */
-		drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
-		drive->dev_flags &= ~IDE_DFLAG_UNMASK;
-	} else {
-		drive->drive_data &= ~t;  /* disable prefetch mode */
-		drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
-	}
-
-	spin_unlock_irqrestore(&ht6560b_lock, flags);
-
-#ifdef DEBUG
-	printk("ht6560b: drive %s prefetch mode %sabled\n", drive->name, (state ? "en" : "dis"));
-#endif
-}
-
-static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	unsigned long flags;
-	u8 timing;
-	
-	switch (pio) {
-	case 8:         /* set prefetch off */
-	case 9:         /* set prefetch on */
-		ht_set_prefetch(drive, pio & 1);
-		return;
-	}
-
-	timing = ht_pio2timings(drive, pio);
-
-	spin_lock_irqsave(&ht6560b_lock, flags);
-	drive->drive_data &= 0xff00;
-	drive->drive_data |= timing;
-	spin_unlock_irqrestore(&ht6560b_lock, flags);
-
-#ifdef DEBUG
-	printk("ht6560b: drive %s tuned to pio mode %#x timing=%#x\n", drive->name, pio, timing);
-#endif
-}
-
-static void __init ht6560b_init_dev(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	/* Setting default configurations for drives. */
-	int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT;
-
-	if (hwif->channel)
-		t |= (HT_SECONDARY_IF << 8);
-
-	drive->drive_data = t;
-}
-
-static int probe_ht6560b;
-
-module_param_named(probe, probe_ht6560b, bool, 0);
-MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
-
-static const struct ide_port_ops ht6560b_port_ops = {
-	.init_dev		= ht6560b_init_dev,
-	.set_pio_mode		= ht6560b_set_pio_mode,
-	.selectproc		= ht6560b_selectproc,
-};
-
-static const struct ide_port_info ht6560b_port_info __initdata = {
-	.name			= DRV_NAME,
-	.chipset		= ide_ht6560b,
-	.port_ops		= &ht6560b_port_ops,
-	.host_flags		= IDE_HFLAG_SERIALIZE | /* is this needed? */
-				  IDE_HFLAG_NO_DMA |
-				  IDE_HFLAG_ABUSE_PREFETCH,
-	.pio_mask		= ATA_PIO4,
-};
-
-static int __init ht6560b_init(void)
-{
-	if (probe_ht6560b == 0)
-		return -ENODEV;
-
-	if (!request_region(HT_CONFIG_PORT, 1, DRV_NAME)) {
-		printk(KERN_NOTICE "%s: HT_CONFIG_PORT not found\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	if (!try_to_init_ht6560b()) {
-		printk(KERN_NOTICE "%s: HBA not found\n", __func__);
-		goto release_region;
-	}
-
-	return ide_legacy_device_add(&ht6560b_port_info, 0);
-
-release_region:
-	release_region(HT_CONFIG_PORT, 1);
-	return -ENODEV;
-}
-
-module_init(ht6560b_init);
-
-MODULE_AUTHOR("See Local File");
-MODULE_DESCRIPTION("HT-6560B EIDE-controller support");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c
deleted file mode 100644
index 9e85b1ec960..00000000000
--- a/drivers/ide/legacy/ide-4drives.c
+++ /dev/null
@@ -1,63 +0,0 @@
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "ide-4drives"
-
-static int probe_4drives;
-
-module_param_named(probe, probe_4drives, bool, 0);
-MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");
-
-static void ide_4drives_init_dev(ide_drive_t *drive)
-{
-	if (drive->hwif->channel)
-		drive->select ^= 0x20;
-}
-
-static const struct ide_port_ops ide_4drives_port_ops = {
-	.init_dev		= ide_4drives_init_dev,
-};
-
-static const struct ide_port_info ide_4drives_port_info = {
-	.port_ops		= &ide_4drives_port_ops,
-	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA,
-};
-
-static int __init ide_4drives_init(void)
-{
-	unsigned long base = 0x1f0, ctl = 0x3f6;
-	hw_regs_t hw, *hws[] = { &hw, &hw, NULL, NULL };
-
-	if (probe_4drives == 0)
-		return -ENODEV;
-
-	if (!request_region(base, 8, DRV_NAME)) {
-		printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
-				DRV_NAME, base, base + 7);
-		return -EBUSY;
-	}
-
-	if (!request_region(ctl, 1, DRV_NAME)) {
-		printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
-				DRV_NAME, ctl);
-		release_region(base, 8);
-		return -EBUSY;
-	}
-
-	memset(&hw, 0, sizeof(hw));
-
-	ide_std_init_ports(&hw, base, ctl);
-	hw.irq = 14;
-	hw.chipset = ide_4drives;
-
-	return ide_host_add(&ide_4drives_port_info, hws, NULL);
-}
-
-module_init(ide_4drives_init);
-
-MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("generic IDE chipset with 4 drives/port support");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
deleted file mode 100644
index cb199c815b5..00000000000
--- a/drivers/ide/legacy/ide-cs.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*======================================================================
-
-    A driver for PCMCIA IDE/ATA disk cards
-
-    The contents of this file are subject to the Mozilla Public
-    License Version 1.1 (the "License"); you may not use this file
-    except in compliance with the License. You may obtain a copy of
-    the License at http://www.mozilla.org/MPL/
-
-    Software distributed under the License is distributed on an "AS
-    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-    implied. See the License for the specific language governing
-    rights and limitations under the License.
-
-    The initial developer of the original code is David A. Hinds
-    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
-
-    Alternatively, the contents of this file may be used under the
-    terms of the GNU General Public License version 2 (the "GPL"), in
-    which case the provisions of the GPL are applicable instead of the
-    above.  If you wish to allow the use of your version of this file
-    only under the terms of the GPL and not to allow others to use
-    your version of this file under the MPL, indicate your decision
-    by deleting the provisions above and replace them with the notice
-    and other provisions required by the GPL.  If you do not delete
-    the provisions above, a recipient may use your version of this
-    file under either the MPL or the GPL.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/ide.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-
-#define DRV_NAME "ide-cs"
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
-MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
-MODULE_LICENSE("Dual MPL/GPL");
-
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-#ifdef CONFIG_PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
-
-/*====================================================================*/
-
-typedef struct ide_info_t {
-	struct pcmcia_device	*p_dev;
-	struct ide_host		*host;
-    int		ndev;
-    dev_node_t	node;
-} ide_info_t;
-
-static void ide_release(struct pcmcia_device *);
-static int ide_config(struct pcmcia_device *);
-
-static void ide_detach(struct pcmcia_device *p_dev);
-
-
-
-
-/*======================================================================
-
-    ide_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
-static int ide_probe(struct pcmcia_device *link)
-{
-    ide_info_t *info;
-
-    DEBUG(0, "ide_attach()\n");
-
-    /* Create new ide device */
-    info = kzalloc(sizeof(*info), GFP_KERNEL);
-    if (!info)
-	return -ENOMEM;
-
-    info->p_dev = link;
-    link->priv = info;
-
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-    link->io.IOAddrLines = 3;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-
-    return ide_config(link);
-} /* ide_attach */
-
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
-static void ide_detach(struct pcmcia_device *link)
-{
-    ide_info_t *info = link->priv;
-    ide_hwif_t *hwif = info->host->ports[0];
-    unsigned long data_addr, ctl_addr;
-
-    DEBUG(0, "ide_detach(0x%p)\n", link);
-
-    data_addr = hwif->io_ports.data_addr;
-    ctl_addr  = hwif->io_ports.ctl_addr;
-
-    ide_release(link);
-
-    release_region(ctl_addr, 1);
-    release_region(data_addr, 8);
-
-    kfree(info);
-} /* ide_detach */
-
-static const struct ide_port_ops idecs_port_ops = {
-	.quirkproc		= ide_undecoded_slave,
-};
-
-static const struct ide_port_info idecs_port_info = {
-	.port_ops		= &idecs_port_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-};
-
-static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
-				unsigned long irq, struct pcmcia_device *handle)
-{
-    struct ide_host *host;
-    ide_hwif_t *hwif;
-    int i, rc;
-    hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
-    if (!request_region(io, 8, DRV_NAME)) {
-	printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
-			DRV_NAME, io, io + 7);
-	return NULL;
-    }
-
-    if (!request_region(ctl, 1, DRV_NAME)) {
-	printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
-			DRV_NAME, ctl);
-	release_region(io, 8);
-	return NULL;
-    }
-
-    memset(&hw, 0, sizeof(hw));
-    ide_std_init_ports(&hw, io, ctl);
-    hw.irq = irq;
-    hw.chipset = ide_pci;
-    hw.dev = &handle->dev;
-
-    rc = ide_host_add(&idecs_port_info, hws, &host);
-    if (rc)
-	goto out_release;
-
-    hwif = host->ports[0];
-
-    if (hwif->present)
-	return host;
-
-    /* retry registration in case device is still spinning up */
-    for (i = 0; i < 10; i++) {
-	msleep(100);
-	ide_port_scan(hwif);
-	if (hwif->present)
-	    return host;
-    }
-
-    return host;
-
-out_release:
-    release_region(ctl, 1);
-    release_region(io, 8);
-    return NULL;
-}
-
-/*======================================================================
-
-    ide_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ide device available to the system.
-
-======================================================================*/
-
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-struct pcmcia_config_check {
-	unsigned long ctl_base;
-	int skip_vcc;
-	int is_kme;
-};
-
-static int pcmcia_check_one_config(struct pcmcia_device *pdev,
-				   cistpl_cftable_entry_t *cfg,
-				   cistpl_cftable_entry_t *dflt,
-				   unsigned int vcc,
-				   void *priv_data)
-{
-	struct pcmcia_config_check *stk = priv_data;
-
-	/* Check for matching Vcc, unless we're desperate */
-	if (!stk->skip_vcc) {
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		}
-	}
-
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		pdev->conf.ConfigIndex = cfg->index;
-		pdev->io.BasePort1 = io->win[0].base;
-		pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		if (io->nwin == 2) {
-			pdev->io.NumPorts1 = 8;
-			pdev->io.BasePort2 = io->win[1].base;
-			pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort2;
-		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-			pdev->io.NumPorts1 = io->win[0].len;
-			pdev->io.NumPorts2 = 0;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort1 + 0x0e;
-		} else
-			return -ENODEV;
-		/* If we've got this far, we're done */
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static int ide_config(struct pcmcia_device *link)
-{
-    ide_info_t *info = link->priv;
-    struct pcmcia_config_check *stk = NULL;
-    int last_ret = 0, last_fn = 0, is_kme = 0;
-    unsigned long io_base, ctl_base;
-    struct ide_host *host;
-
-    DEBUG(0, "ide_config(0x%p)\n", link);
-
-    is_kme = ((link->manf_id == MANFID_KME) &&
-	      ((link->card_id == PRODID_KME_KXLC005_A) ||
-	       (link->card_id == PRODID_KME_KXLC005_B)));
-
-    stk = kzalloc(sizeof(*stk), GFP_KERNEL);
-    if (!stk)
-	    goto err_mem;
-    stk->is_kme = is_kme;
-    stk->skip_vcc = io_base = ctl_base = 0;
-
-    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
-	    stk->skip_vcc = 1;
-	    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
-		    goto failed; /* No suitable config found */
-    }
-    io_base = link->io.BasePort1;
-    ctl_base = stk->ctl_base;
-
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
-
-    /* disable drive interrupts during IDE probe */
-    outb(0x02, ctl_base);
-
-    /* special setup for KXLC005 card */
-    if (is_kme)
-	outb(0x81, ctl_base+1);
-
-     host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
-     if (host == NULL && link->io.NumPorts1 == 0x20) {
-	    outb(0x02, ctl_base + 0x10);
-	    host = idecs_register(io_base + 0x10, ctl_base + 0x10,
-				  link->irq.AssignedIRQ, link);
-    }
-
-    if (host == NULL)
-	goto failed;
-
-    info->ndev = 1;
-    sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2);
-    info->node.major = host->ports[0]->major;
-    info->node.minor = 0;
-    info->host = host;
-    link->dev_node = &info->node;
-    printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
-	   info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
-
-    kfree(stk);
-    return 0;
-
-err_mem:
-    printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
-    goto failed;
-
-cs_failed:
-    cs_error(link, last_fn, last_ret);
-failed:
-    kfree(stk);
-    ide_release(link);
-    return -ENODEV;
-} /* ide_config */
-
-/*======================================================================
-
-    After a card is removed, ide_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
-static void ide_release(struct pcmcia_device *link)
-{
-    ide_info_t *info = link->priv;
-    struct ide_host *host = info->host;
-
-    DEBUG(0, "ide_release(0x%p)\n", link);
-
-    if (info->ndev)
-	/* FIXME: if this fails we need to queue the cleanup somehow
-	   -- need to investigate the required PCMCIA magic */
-	ide_host_remove(host);
-
-    info->ndev = 0;
-
-    pcmcia_disable_device(link);
-} /* ide_release */
-
-
-/*======================================================================
-
-    The card status event handler.  Mostly, this schedules other
-    stuff to run after an event is received.  A CARD_REMOVAL event
-    also sets some flags to discourage the ide drivers from
-    talking to the ports.
-
-======================================================================*/
-
-static struct pcmcia_device_id ide_ids[] = {
-	PCMCIA_DEVICE_FUNC_ID(4),
-	PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000),	/* Corsair */
-	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
-	PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000),	/* I-O Data CFA */
-	PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),	/* Mitsubishi CFA */
-	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
-	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
-	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	/* SanDisk CFA */
-	PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000),	/* Kingston */
-	PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), 	/* TI emulated */
-	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
-	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
-	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
-	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
-	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
-	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100),	/* Viking CFA */
-	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar, Viking CFA */
-	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
-	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
-	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
-	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
-	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
-	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
-	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
-	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
-	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
-	PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
-	PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
-	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
-	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
-	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
-	PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
-	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
-	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
-	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
-	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
-	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
-	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
-	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
-	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
-	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
-	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
-	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
-	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
-	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
-	PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
-	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
-	PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
-	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
-	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
-	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
-	PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
-	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
-	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
-	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, ide_ids);
-
-static struct pcmcia_driver ide_cs_driver = {
-	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "ide-cs",
-	},
-	.probe		= ide_probe,
-	.remove		= ide_detach,
-	.id_table       = ide_ids,
-};
-
-static int __init init_ide_cs(void)
-{
-	return pcmcia_register_driver(&ide_cs_driver);
-}
-
-static void __exit exit_ide_cs(void)
-{
-	pcmcia_unregister_driver(&ide_cs_driver);
-}
-
-late_initcall(init_ide_cs);
-module_exit(exit_ide_cs);
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
deleted file mode 100644
index 051b4ab0f35..00000000000
--- a/drivers/ide/legacy/ide_platform.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Platform IDE driver
- *
- * Copyright (C) 2007 MontaVista Software
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/ata_platform.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
-					   void __iomem *base,
-					   void __iomem *ctrl,
-					   struct pata_platform_info *pdata,
-					   int irq)
-{
-	unsigned long port = (unsigned long)base;
-	int i;
-
-	hw->io_ports.data_addr = port;
-
-	port += (1 << pdata->ioport_shift);
-	for (i = 1; i <= 7;
-	     i++, port += (1 << pdata->ioport_shift))
-		hw->io_ports_array[i] = port;
-
-	hw->io_ports.ctl_addr = (unsigned long)ctrl;
-
-	hw->irq = irq;
-
-	hw->chipset = ide_generic;
-}
-
-static const struct ide_port_info platform_ide_port_info = {
-	.host_flags		= IDE_HFLAG_NO_DMA,
-};
-
-static int __devinit plat_ide_probe(struct platform_device *pdev)
-{
-	struct resource *res_base, *res_alt, *res_irq;
-	void __iomem *base, *alt_base;
-	struct pata_platform_info *pdata;
-	struct ide_host *host;
-	int ret = 0, mmio = 0;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	struct ide_port_info d = platform_ide_port_info;
-
-	pdata = pdev->dev.platform_data;
-
-	/* get a pointer to the register memory */
-	res_base = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	res_alt = platform_get_resource(pdev, IORESOURCE_IO, 1);
-
-	if (!res_base || !res_alt) {
-		res_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		res_alt = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (!res_base || !res_alt) {
-			ret = -ENOMEM;
-			goto out;
-		}
-		mmio = 1;
-	}
-
-	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res_irq) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (mmio) {
-		base = devm_ioremap(&pdev->dev,
-			res_base->start, res_base->end - res_base->start + 1);
-		alt_base = devm_ioremap(&pdev->dev,
-			res_alt->start, res_alt->end - res_alt->start + 1);
-	} else {
-		base = devm_ioport_map(&pdev->dev,
-			res_base->start, res_base->end - res_base->start + 1);
-		alt_base = devm_ioport_map(&pdev->dev,
-			res_alt->start, res_alt->end - res_alt->start + 1);
-	}
-
-	memset(&hw, 0, sizeof(hw));
-	plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
-	hw.dev = &pdev->dev;
-
-	if (mmio)
-		d.host_flags |= IDE_HFLAG_MMIO;
-
-	ret = ide_host_add(&d, hws, &host);
-	if (ret)
-		goto out;
-
-	platform_set_drvdata(pdev, host);
-
-	return 0;
-
-out:
-	return ret;
-}
-
-static int __devexit plat_ide_remove(struct platform_device *pdev)
-{
-	struct ide_host *host = pdev->dev.driver_data;
-
-	ide_host_remove(host);
-
-	return 0;
-}
-
-static struct platform_driver platform_ide_driver = {
-	.driver = {
-		.name = "pata_platform",
-		.owner = THIS_MODULE,
-	},
-	.probe = plat_ide_probe,
-	.remove = __devexit_p(plat_ide_remove),
-};
-
-static int __init platform_ide_init(void)
-{
-	return platform_driver_register(&platform_ide_driver);
-}
-
-static void __exit platform_ide_exit(void)
-{
-	platform_driver_unregister(&platform_ide_driver);
-}
-
-MODULE_DESCRIPTION("Platform IDE driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pata_platform");
-
-module_init(platform_ide_init);
-module_exit(platform_ide_exit);
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
deleted file mode 100644
index 43f97cc1d30..00000000000
--- a/drivers/ide/legacy/macide.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  Macintosh IDE Driver
- *
- *     Copyright (C) 1998 by Michael Schmitz
- *
- *  This driver was written based on information obtained from the MacOS IDE
- *  driver binary by Mikael Forselius
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-
-#include <asm/machw.h>
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_baboon.h>
-
-#define IDE_BASE 0x50F1A000	/* Base address of IDE controller */
-
-/*
- * Generic IDE registers as offsets from the base
- * These match MkLinux so they should be correct.
- */
-
-#define IDE_CONTROL	0x38	/* control/altstatus */
-
-/*
- * Mac-specific registers
- */
-
-/*
- * this register is odd; it doesn't seem to do much and it's
- * not word-aligned like virtually every other hardware register
- * on the Mac...
- */
-
-#define IDE_IFR		0x101	/* (0x101) IDE interrupt flags on Quadra:
-				 *
-				 * Bit 0+1: some interrupt flags
-				 * Bit 2+3: some interrupt enable
-				 * Bit 4:   ??
-				 * Bit 5:   IDE interrupt flag (any hwif)
-				 * Bit 6:   maybe IDE interrupt enable (any hwif) ??
-				 * Bit 7:   Any interrupt condition
-				 */
-
-volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
-
-int macide_ack_intr(ide_hwif_t* hwif)
-{
-	if (*ide_ifr & 0x20) {
-		*ide_ifr &= ~0x20;
-		return 1;
-	}
-	return 0;
-}
-
-static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
-				      int irq, ide_ack_intr_t *ack_intr)
-{
-	int i;
-
-	memset(hw, 0, sizeof(*hw));
-
-	for (i = 0; i < 8; i++)
-		hw->io_ports_array[i] = base + i * 4;
-
-	hw->io_ports.ctl_addr = base + IDE_CONTROL;
-
-	hw->irq = irq;
-	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
-}
-
-static const char *mac_ide_name[] =
-	{ "Quadra", "Powerbook", "Powerbook Baboon" };
-
-/*
- * Probe for a Macintosh IDE interface
- */
-
-static int __init macide_init(void)
-{
-	ide_ack_intr_t *ack_intr;
-	unsigned long base;
-	int irq;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
-	if (!MACH_IS_MAC)
-		return -ENODEV;
-
-	switch (macintosh_config->ide_type) {
-	case MAC_IDE_QUADRA:
-		base = IDE_BASE;
-		ack_intr = macide_ack_intr;
-		irq = IRQ_NUBUS_F;
-		break;
-	case MAC_IDE_PB:
-		base = IDE_BASE;
-		ack_intr = macide_ack_intr;
-		irq = IRQ_NUBUS_C;
-		break;
-	case MAC_IDE_BABOON:
-		base = BABOON_BASE;
-		ack_intr = NULL;
-		irq = IRQ_BABOON_1;
-		break;
-	default:
-		return -ENODEV;
-	}
-
-	printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
-			 mac_ide_name[macintosh_config->ide_type - 1]);
-
-	macide_setup_ports(&hw, base, irq, ack_intr);
-
-	return ide_host_add(NULL, hws, NULL);
-}
-
-module_init(macide_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
deleted file mode 100644
index 4af4a8ce4cd..00000000000
--- a/drivers/ide/legacy/q40ide.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- *  Q40 I/O port IDE Driver
- *
- *     (c) Richard Zidlicky
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- *
- *
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-
-    /*
-     *  Bases of the IDE interfaces
-     */
-
-#define Q40IDE_NUM_HWIFS	2
-
-#define PCIDE_BASE1	0x1f0
-#define PCIDE_BASE2	0x170
-#define PCIDE_BASE3	0x1e8
-#define PCIDE_BASE4	0x168
-#define PCIDE_BASE5	0x1e0
-#define PCIDE_BASE6	0x160
-
-static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
-    PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4  , PCIDE_BASE5,
-    PCIDE_BASE6 */
-};
-
-static int q40ide_default_irq(unsigned long base)
-{
-           switch (base) {
-	            case 0x1f0: return 14;
-		    case 0x170: return 15;
-		    case 0x1e8: return 11;
-		    default:
-			return 0;
-	   }
-}
-
-
-/*
- * Addresses are pretranslated for Q40 ISA access.
- */
-static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
-			ide_ack_intr_t *ack_intr,
-			int irq)
-{
-	memset(hw, 0, sizeof(hw_regs_t));
-	/* BIG FAT WARNING: 
-	   assumption: only DATA port is ever used in 16 bit mode */
-	hw->io_ports.data_addr = Q40_ISA_IO_W(base);
-	hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
-	hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
-	hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
-	hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
-	hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
-	hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
-	hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
-	hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
-
-	hw->irq = irq;
-	hw->ack_intr = ack_intr;
-
-	hw->chipset = ide_generic;
-}
-
-static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
-			      void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
-		return insw(data_addr, buf, (len + 1) / 2);
-
-	insw_swapw(data_addr, buf, (len + 1) / 2);
-}
-
-static void q40ide_output_data(ide_drive_t *drive, struct request *rq,
-			       void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
-		return outsw(data_addr, buf, (len + 1) / 2);
-
-	outsw_swapw(data_addr, buf, (len + 1) / 2);
-}
-
-/* Q40 has a byte-swapped IDE interface */
-static const struct ide_tp_ops q40ide_tp_ops = {
-	.exec_command		= ide_exec_command,
-	.read_status		= ide_read_status,
-	.read_altstatus		= ide_read_altstatus,
-	.read_sff_dma_status	= ide_read_sff_dma_status,
-
-	.set_irq		= ide_set_irq,
-
-	.tf_load		= ide_tf_load,
-	.tf_read		= ide_tf_read,
-
-	.input_data		= q40ide_input_data,
-	.output_data		= q40ide_output_data,
-};
-
-static const struct ide_port_info q40ide_port_info = {
-	.tp_ops			= &q40ide_tp_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-};
-
-/* 
- * the static array is needed to have the name reported in /proc/ioports,
- * hwif->name unfortunately isn't available yet
- */
-static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
-	"ide0", "ide1"
-};
-
-/*
- *  Probe for Q40 IDE interfaces
- */
-
-static int __init q40ide_init(void)
-{
-    int i;
-    hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
-
-    if (!MACH_IS_Q40)
-      return -ENODEV;
-
-    printk(KERN_INFO "ide: Q40 IDE controller\n");
-
-    for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
-	const char *name = q40_ide_names[i];
-
-	if (!request_region(pcide_bases[i], 8, name)) {
-		printk("could not reserve ports %lx-%lx for %s\n",
-		       pcide_bases[i],pcide_bases[i]+8,name);
-		continue;
-	}
-	if (!request_region(pcide_bases[i]+0x206, 1, name)) {
-		printk("could not reserve port %lx for %s\n",
-		       pcide_bases[i]+0x206,name);
-		release_region(pcide_bases[i], 8);
-		continue;
-	}
-	q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
-			q40ide_default_irq(pcide_bases[i]));
-
-	hws[i] = &hw[i];
-    }
-
-    return ide_host_add(&q40ide_port_info, hws, NULL);
-}
-
-module_init(q40ide_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
deleted file mode 100644
index bc27c7aba93..00000000000
--- a/drivers/ide/legacy/qd65xx.c
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- *  Copyright (C) 1996-2001  Linus Torvalds & author (see below)
- */
-
-/*
- *  Version 0.03	Cleaned auto-tune, added probe
- *  Version 0.04	Added second channel tuning
- *  Version 0.05	Enhanced tuning ; added qd6500 support
- *  Version 0.06	Added dos driver's list
- *  Version 0.07	Second channel bug fix 
- *
- * QDI QD6500/QD6580 EIDE controller fast support
- *
- * To activate controller support, use "ide0=qd65xx"
- */
-
-/*
- * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@fnac.net>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <asm/system.h>
-#include <asm/io.h>
-
-#define DRV_NAME "qd65xx"
-
-#include "qd65xx.h"
-
-/*
- * I/O ports are 0x30-0x31 (and 0x32-0x33 for qd6580)
- *            or 0xb0-0xb1 (and 0xb2-0xb3 for qd6580)
- *	-- qd6500 is a single IDE interface
- *	-- qd6580 is a dual IDE interface
- *
- * More research on qd6580 being done by willmore@cig.mot.com (David)
- * More Information given by Petr Soucek (petr@ryston.cz)
- * http://www.ryston.cz/petr/vlb
- */
-
-/*
- * base: Timer1
- *
- *
- * base+0x01: Config (R/O)
- *
- * bit 0: ide baseport: 1 = 0x1f0 ; 0 = 0x170 (only useful for qd6500)
- * bit 1: qd65xx baseport: 1 = 0xb0 ; 0 = 0x30
- * bit 2: ID3: bus speed: 1 = <=33MHz ; 0 = >33MHz
- * bit 3: qd6500: 1 = disabled, 0 = enabled
- *        qd6580: 1
- * upper nibble:
- *        qd6500: 1100
- *        qd6580: either 1010 or 0101
- *
- *
- * base+0x02: Timer2 (qd6580 only)
- *
- *
- * base+0x03: Control (qd6580 only)
- *
- * bits 0-3 must always be set 1
- * bit 4 must be set 1, but is set 0 by dos driver while measuring vlb clock
- * bit 0 : 1 = Only primary port enabled : channel 0 for hda, channel 1 for hdb
- *         0 = Primary and Secondary ports enabled : channel 0 for hda & hdb
- *                                                   channel 1 for hdc & hdd
- * bit 1 : 1 = only disks on primary port
- *         0 = disks & ATAPI devices on primary port
- * bit 2-4 : always 0
- * bit 5 : status, but of what ?
- * bit 6 : always set 1 by dos driver
- * bit 7 : set 1 for non-ATAPI devices on primary port
- *	(maybe read-ahead and post-write buffer ?)
- */
-
-static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */
-
-/*
- * qd65xx_select:
- *
- * This routine is invoked to prepare for access to a given drive.
- */
-
-static void qd65xx_select(ide_drive_t *drive)
-{
-	u8 index = ((	(QD_TIMREG(drive)) & 0x80 ) >> 7) |
-			(QD_TIMREG(drive) & 0x02);
-
-	if (timings[index] != QD_TIMING(drive))
-		outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive));
-}
-
-/*
- * qd6500_compute_timing
- *
- * computes the timing value where
- *	lower nibble represents active time,   in count of VLB clocks
- *	upper nibble represents recovery time, in count of VLB clocks
- */
-
-static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time)
-{
-	int clk = ide_vlb_clk ? ide_vlb_clk : 50;
-	u8 act_cyc, rec_cyc;
-
-	if (clk <= 33) {
-		act_cyc =  9 - IDE_IN(active_time   * clk / 1000 + 1, 2,  9);
-		rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 0, 15);
-	} else {
-		act_cyc =  8 - IDE_IN(active_time   * clk / 1000 + 1, 1,  8);
-		rec_cyc = 18 - IDE_IN(recovery_time * clk / 1000 + 1, 3, 18);
-	}
-
-	return (rec_cyc << 4) | 0x08 | act_cyc;
-}
-
-/*
- * qd6580_compute_timing
- *
- * idem for qd6580
- */
-
-static u8 qd6580_compute_timing (int active_time, int recovery_time)
-{
-	int clk = ide_vlb_clk ? ide_vlb_clk : 50;
-	u8 act_cyc, rec_cyc;
-
-	act_cyc = 17 - IDE_IN(active_time   * clk / 1000 + 1, 2, 17);
-	rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 2, 15);
-
-	return (rec_cyc << 4) | act_cyc;
-}
-
-/*
- * qd_find_disk_type
- *
- * tries to find timing from dos driver's table
- */
-
-static int qd_find_disk_type (ide_drive_t *drive,
-		int *active_time, int *recovery_time)
-{
-	struct qd65xx_timing_s *p;
-	char *m = (char *)&drive->id[ATA_ID_PROD];
-	char model[ATA_ID_PROD_LEN];
-
-	if (*m == 0)
-		return 0;
-
-	strncpy(model, m, ATA_ID_PROD_LEN);
-	ide_fixstring(model, ATA_ID_PROD_LEN, 1); /* byte-swap */
-
-	for (p = qd65xx_timing ; p->offset != -1 ; p++) {
-		if (!strncmp(p->model, model+p->offset, 4)) {
-			printk(KERN_DEBUG "%s: listed !\n", drive->name);
-			*active_time = p->active;
-			*recovery_time = p->recovery;
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * qd_set_timing:
- *
- * records the timing
- */
-
-static void qd_set_timing (ide_drive_t *drive, u8 timing)
-{
-	drive->drive_data &= 0xff00;
-	drive->drive_data |= timing;
-
-	printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
-}
-
-static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	u16 *id = drive->id;
-	int active_time   = 175;
-	int recovery_time = 415; /* worst case values from the dos driver */
-
-	/*
-	 * FIXME: use "pio" value
-	 */
-	if (!qd_find_disk_type(drive, &active_time, &recovery_time) &&
-	    (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) &&
-	    id[ATA_ID_EIDE_PIO] >= 240) {
-		printk(KERN_INFO "%s: PIO mode%d\n", drive->name,
-			id[ATA_ID_OLD_PIO_MODES] & 0xff);
-		active_time = 110;
-		recovery_time = drive->id[ATA_ID_EIDE_PIO] - 120;
-	}
-
-	qd_set_timing(drive, qd6500_compute_timing(HWIF(drive), active_time, recovery_time));
-}
-
-static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-	unsigned int cycle_time;
-	int active_time   = 175;
-	int recovery_time = 415; /* worst case values from the dos driver */
-	u8 base = (hwif->config_data & 0xff00) >> 8;
-
-	if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
-		cycle_time = ide_pio_cycle_time(drive, pio);
-
-		switch (pio) {
-			case 0: break;
-			case 3:
-				if (cycle_time >= 110) {
-					active_time = 86;
-					recovery_time = cycle_time - 102;
-				} else
-					printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
-				break;
-			case 4:
-				if (cycle_time >= 69) {
-					active_time = 70;
-					recovery_time = cycle_time - 61;
-				} else
-					printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
-				break;
-			default:
-				if (cycle_time >= 180) {
-					active_time = 110;
-					recovery_time = cycle_time - 120;
-				} else {
-					active_time = t->active;
-					recovery_time = cycle_time - active_time;
-				}
-		}
-		printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio);
-	}
-
-	if (!HWIF(drive)->channel && drive->media != ide_disk) {
-		outb(0x5f, QD_CONTROL_PORT);
-		printk(KERN_WARNING "%s: ATAPI: disabled read-ahead FIFO "
-			"and post-write buffer on %s.\n",
-			drive->name, HWIF(drive)->name);
-	}
-
-	qd_set_timing(drive, qd6580_compute_timing(active_time, recovery_time));
-}
-
-/*
- * qd_testreg
- *
- * tests if the given port is a register
- */
-
-static int __init qd_testreg(int port)
-{
-	unsigned long flags;
-	u8 savereg, readreg;
-
-	local_irq_save(flags);
-	savereg = inb_p(port);
-	outb_p(QD_TESTVAL, port);	/* safe value */
-	readreg = inb_p(port);
-	outb(savereg, port);
-	local_irq_restore(flags);
-
-	if (savereg == QD_TESTVAL) {
-		printk(KERN_ERR "Outch ! the probe for qd65xx isn't reliable !\n");
-		printk(KERN_ERR "Please contact maintainers to tell about your hardware\n");
-		printk(KERN_ERR "Assuming qd65xx is not present.\n");
-		return 1;
-	}
-
-	return (readreg != QD_TESTVAL);
-}
-
-static void __init qd6500_init_dev(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 base = (hwif->config_data & 0xff00) >> 8;
-	u8 config = QD_CONFIG(hwif);
-
-	drive->drive_data = QD6500_DEF_DATA;
-}
-
-static void __init qd6580_init_dev(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u16 t1, t2;
-	u8 base = (hwif->config_data & 0xff00) >> 8;
-	u8 config = QD_CONFIG(hwif);
-
-	if (hwif->host_flags & IDE_HFLAG_SINGLE) {
-		t1 = QD6580_DEF_DATA;
-		t2 = QD6580_DEF_DATA2;
-	} else
-		t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
-
-	drive->drive_data = (drive->dn & 1) ? t2 : t1;
-}
-
-static const struct ide_port_ops qd6500_port_ops = {
-	.init_dev		= qd6500_init_dev,
-	.set_pio_mode		= qd6500_set_pio_mode,
-	.selectproc		= qd65xx_select,
-};
-
-static const struct ide_port_ops qd6580_port_ops = {
-	.init_dev		= qd6580_init_dev,
-	.set_pio_mode		= qd6580_set_pio_mode,
-	.selectproc		= qd65xx_select,
-};
-
-static const struct ide_port_info qd65xx_port_info __initdata = {
-	.name			= DRV_NAME,
-	.chipset		= ide_qd65xx,
-	.host_flags		= IDE_HFLAG_IO_32BIT |
-				  IDE_HFLAG_NO_DMA,
-	.pio_mask		= ATA_PIO4,
-};
-
-/*
- * qd_probe:
- *
- * looks at the specified baseport, and if qd found, registers & initialises it
- * return 1 if another qd may be probed
- */
-
-static int __init qd_probe(int base)
-{
-	int rc;
-	u8 config, unit, control;
-	struct ide_port_info d = qd65xx_port_info;
-
-	config = inb(QD_CONFIG_PORT);
-
-	if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) )
-		return -ENODEV;
-
-	unit = ! (config & QD_CONFIG_IDE_BASEPORT);
-
-	if (unit)
-		d.host_flags |= IDE_HFLAG_QD_2ND_PORT;
-
-	switch (config & 0xf0) {
-	case QD_CONFIG_QD6500:
-		if (qd_testreg(base))
-			 return -ENODEV;	/* bad register */
-
-		if (config & QD_CONFIG_DISABLED) {
-			printk(KERN_WARNING "qd6500 is disabled !\n");
-			return -ENODEV;
-		}
-
-		printk(KERN_NOTICE "qd6500 at %#x\n", base);
-		printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n",
-			config, QD_ID3);
-
-		d.port_ops = &qd6500_port_ops;
-		d.host_flags |= IDE_HFLAG_SINGLE;
-		break;
-	case QD_CONFIG_QD6580_A:
-	case QD_CONFIG_QD6580_B:
-		if (qd_testreg(base) || qd_testreg(base + 0x02))
-			return -ENODEV;	/* bad registers */
-
-		control = inb(QD_CONTROL_PORT);
-
-		printk(KERN_NOTICE "qd6580 at %#x\n", base);
-		printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
-			config, control, QD_ID3);
-
-		outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
-		d.port_ops = &qd6580_port_ops;
-		if (control & QD_CONTR_SEC_DISABLED)
-			d.host_flags |= IDE_HFLAG_SINGLE;
-
-		printk(KERN_INFO "qd6580: %s IDE board\n",
-			(control & QD_CONTR_SEC_DISABLED) ? "single" : "dual");
-		break;
-	default:
-		return -ENODEV;
-	}
-
-	rc = ide_legacy_device_add(&d, (base << 8) | config);
-
-	if (d.host_flags & IDE_HFLAG_SINGLE)
-		return (rc == 0) ? 1 : rc;
-
-	return rc;
-}
-
-static int probe_qd65xx;
-
-module_param_named(probe, probe_qd65xx, bool, 0);
-MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
-
-static int __init qd65xx_init(void)
-{
-	int rc1, rc2 = -ENODEV;
-
-	if (probe_qd65xx == 0)
-		return -ENODEV;
-
-	rc1 = qd_probe(0x30);
-	if (rc1)
-		rc2 = qd_probe(0xb0);
-
-	if (rc1 < 0 && rc2 < 0)
-		return -ENODEV;
-
-	return 0;
-}
-
-module_init(qd65xx_init);
-
-MODULE_AUTHOR("Samuel Thibault");
-MODULE_DESCRIPTION("support of qd65xx vlb ide chipset");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/qd65xx.h b/drivers/ide/legacy/qd65xx.h
deleted file mode 100644
index c83dea85e62..00000000000
--- a/drivers/ide/legacy/qd65xx.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (c) 2000	Linus Torvalds & authors
- */
-
-/*
- * Authors:	Petr Soucek <petr@ryston.cz>
- * 		Samuel Thibault <samuel.thibault@fnac.net>
- */
-
-/* truncates a in [b,c] */
-#define IDE_IN(a,b,c)   ( ((a)<(b)) ? (b) : ( (a)>(c) ? (c) : (a)) )
-
-#define IDE_IMPLY(a,b)	((!(a)) || (b))
-
-#define QD_TIM1_PORT		(base)
-#define QD_CONFIG_PORT		(base+0x01)
-#define QD_TIM2_PORT		(base+0x02)
-#define QD_CONTROL_PORT		(base+0x03)
-
-#define QD_CONFIG_IDE_BASEPORT	0x01
-#define QD_CONFIG_BASEPORT	0x02
-#define QD_CONFIG_ID3		0x04
-#define QD_CONFIG_DISABLED	0x08
-#define QD_CONFIG_QD6500	0xc0
-#define QD_CONFIG_QD6580_A	0xa0
-#define QD_CONFIG_QD6580_B	0x50
-
-#define QD_CONTR_SEC_DISABLED	0x01
-
-#define QD_ID3			((config & QD_CONFIG_ID3)!=0)
-
-#define QD_CONFIG(hwif)		((hwif)->config_data & 0x00ff)
-
-#define QD_TIMING(drive)	(byte)(((drive)->drive_data) & 0x00ff)
-#define QD_TIMREG(drive)	(byte)((((drive)->drive_data) & 0xff00) >> 8)
-
-#define QD6500_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0c : 0x08))
-#define QD6580_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0a : 0x00))
-#define QD6580_DEF_DATA2	((QD_TIM2_PORT<<8) | (QD_ID3 ? 0x0a : 0x00))
-#define QD_DEF_CONTR		(0x40 | ((control & 0x02) ? 0x9f : 0x1f))
-
-#define QD_TESTVAL		0x19	/* safe value */
-
-/* Drive specific timing taken from DOS driver v3.7 */
-
-static struct qd65xx_timing_s {
-	s8	offset;   /* ofset from the beginning of Model Number" */
-	char	model[4];    /* 4 chars from Model number, no conversion */
-	s16	active;   /* active time */
-	s16	recovery; /* recovery time */
-} qd65xx_timing [] = {
-	{ 30, "2040", 110, 225 },  /* Conner CP30204			*/
-	{ 30, "2045", 135, 225 },  /* Conner CP30254			*/
-	{ 30, "1040", 155, 325 },  /* Conner CP30104			*/
-	{ 30, "1047", 135, 265 },  /* Conner CP30174			*/
-	{ 30, "5344", 135, 225 },  /* Conner CP3544			*/
-	{ 30, "01 4", 175, 405 },  /* Conner CP-3104			*/
-	{ 27, "C030", 175, 375 },  /* Conner CP3000			*/
-	{  8, "PL42", 110, 295 },  /* Quantum LP240			*/
-	{  8, "PL21", 110, 315 },  /* Quantum LP120			*/
-	{  8, "PL25", 175, 385 },  /* Quantum LP52			*/
-	{  4, "PA24", 110, 285 },  /* WD Piranha SP4200			*/
-	{  6, "2200", 110, 260 },  /* WD Caviar AC2200			*/
-	{  6, "3204", 110, 235 },  /* WD Caviar AC2340			*/
-	{  6, "1202", 110, 265 },  /* WD Caviar AC2120			*/
-	{  0, "DS3-", 135, 315 },  /* Teac SD340			*/
-	{  8, "KM32", 175, 355 },  /* Toshiba MK234			*/
-	{  2, "53A1", 175, 355 },  /* Seagate ST351A			*/
-	{  2, "4108", 175, 295 },  /* Seagate ST1480A			*/
-	{  2, "1344", 175, 335 },  /* Seagate ST3144A			*/
-	{  6, "7 12", 110, 225 },  /* Maxtor 7213A			*/
-	{ 30, "02F4", 145, 295 },  /* Conner 3204F			*/
-	{  2, "1302", 175, 335 },  /* Seagate ST3120A			*/
-	{  2, "2334", 145, 265 },  /* Seagate ST3243A			*/
-	{  2, "2338", 145, 275 },  /* Seagate ST3283A			*/
-	{  2, "3309", 145, 275 },  /* Seagate ST3390A			*/
-	{  2, "5305", 145, 275 },  /* Seagate ST3550A			*/
-	{  2, "4100", 175, 295 },  /* Seagate ST1400A			*/
-	{  2, "4110", 175, 295 },  /* Seagate ST1401A			*/
-	{  2, "6300", 135, 265 },  /* Seagate ST3600A			*/
-	{  2, "5300", 135, 265 },  /* Seagate ST3500A			*/
-	{  6, "7 31", 135, 225 },  /* Maxtor 7131 AT			*/
-	{  6, "7 43", 115, 265 },  /* Maxtor 7345 AT			*/
-	{  6, "7 42", 110, 255 },  /* Maxtor 7245 AT			*/
-	{  6, "3 04", 135, 265 },  /* Maxtor 340 AT			*/
-	{  6, "61 0", 135, 285 },  /* WD AC160				*/
-	{  6, "1107", 135, 235 },  /* WD AC1170				*/
-	{  6, "2101", 110, 220 },  /* WD AC1210				*/
-	{  6, "4202", 135, 245 },  /* WD AC2420				*/
-	{  6, "41 0", 175, 355 },  /* WD Caviar 140			*/
-	{  6, "82 0", 175, 355 },  /* WD Caviar 280			*/
-	{  8, "PL01", 175, 375 },  /* Quantum LP105			*/
-	{  8, "PL25", 110, 295 },  /* Quantum LP525			*/
-	{ 10, "4S 2", 175, 385 },  /* Quantum ELS42			*/
-	{ 10, "8S 5", 175, 385 },  /* Quantum ELS85			*/
-	{ 10, "1S72", 175, 385 },  /* Quantum ELS127			*/
-	{ 10, "1S07", 175, 385 },  /* Quantum ELS170			*/
-	{  8, "ZE42", 135, 295 },  /* Quantum EZ240			*/
-	{  8, "ZE21", 175, 385 },  /* Quantum EZ127			*/
-	{  8, "ZE58", 175, 385 },  /* Quantum EZ85			*/
-	{  8, "ZE24", 175, 385 },  /* Quantum EZ42			*/
-	{ 27, "C036", 155, 325 },  /* Conner CP30064			*/
-	{ 27, "C038", 155, 325 },  /* Conner CP30084			*/
-	{  6, "2205", 110, 255 },  /* WDC AC2250			*/
-	{  2, " CHA", 140, 415 },  /* WDC AH series; WDC AH260, WDC	*/
-	{  2, " CLA", 140, 415 },  /* WDC AL series: WDC AL2120, 2170,	*/
-	{  4, "UC41", 140, 415 },  /* WDC CU140				*/
-	{  6, "1207", 130, 275 },  /* WDC AC2170			*/
-	{  6, "2107", 130, 275 },  /* WDC AC1270			*/
-	{  6, "5204", 130, 275 },  /* WDC AC2540			*/
-	{ 30, "3004", 110, 235 },  /* Conner CP30340			*/
-	{ 30, "0345", 135, 255 },  /* Conner CP30544			*/
-	{ 12, "12A3", 175, 320 },  /* MAXTOR LXT-213A			*/
-	{ 12, "43A0", 145, 240 },  /* MAXTOR LXT-340A			*/
-	{  6, "7 21", 180, 290 },  /* Maxtor 7120 AT			*/
-	{  6, "7 71", 135, 240 },  /* Maxtor 7170 AT			*/
-	{ 12, "45\0000", 110, 205 },   /* MAXTOR MXT-540		*/
-	{  8, "PL11", 180, 290 },  /* QUANTUM LP110A			*/
-	{  8, "OG21", 150, 275 },  /* QUANTUM GO120			*/
-	{ 12, "42A5", 175, 320 },  /* MAXTOR LXT-245A			*/
-	{  2, "2309", 175, 295 },  /* ST3290A				*/
-	{  2, "3358", 180, 310 },  /* ST3385A				*/
-	{  2, "6355", 180, 310 },  /* ST3655A				*/
-	{  2, "1900", 175, 270 },  /* ST9100A				*/
-	{  2, "1954", 175, 270 },  /* ST9145A				*/
-	{  2, "1909", 175, 270 },  /* ST9190AG				*/
-	{  2, "2953", 175, 270 },  /* ST9235A				*/
-	{  2, "1359", 175, 270 },  /* ST3195A				*/
-	{ 24, "3R11", 175, 290 },  /* ALPS ELECTRIC Co.,LTD, DR311C	*/
-	{  0, "2M26", 175, 215 },  /* M262XT-0Ah			*/
-	{  4, "2253", 175, 300 },  /* HP C2235A				*/
-	{  4, "-32A", 145, 245 },  /* H3133-A2				*/
-	{ 30, "0326", 150, 270 },  /* Samsung Electronics 120MB		*/
-	{ 30, "3044", 110, 195 },  /* Conner CFA340A			*/
-	{ 30, "43A0", 110, 195 },  /* Conner CFA340A			*/
-	{ -1, "    ", 175, 415 }   /* unknown disk name			*/
-};
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
deleted file mode 100644
index 1da076e0c91..00000000000
--- a/drivers/ide/legacy/umc8672.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- *  Copyright (C) 1995-1996  Linus Torvalds & author (see below)
- */
-
-/*
- *  Principal Author/Maintainer:  PODIEN@hml2.atlas.de (Wolfram Podien)
- *
- *  This file provides support for the advanced features
- *  of the UMC 8672 IDE interface.
- *
- *  Version 0.01	Initial version, hacked out of ide.c,
- *			and #include'd rather than compiled separately.
- *			This will get cleaned up in a subsequent release.
- *
- *  Version 0.02	now configs/compiles separate from ide.c  -ml
- *  Version 0.03	enhanced auto-tune, fix display bug
- *  Version 0.05	replace sti() with restore_flags()  -ml
- *			add detection of possible race condition  -ml
- */
-
-/*
- * VLB Controller Support from
- * Wolfram Podien
- * Rohoefe 3
- * D28832 Achim
- * Germany
- *
- * To enable UMC8672 support there must a lilo line like
- * append="ide0=umc8672"...
- * To set the speed according to the abilities of the hardware there must be a
- * line like
- * #define UMC_DRIVE0 11
- * in the beginning of the driver, which sets the speed of drive 0 to 11 (there
- * are some lines present). 0 - 11 are allowed speed values. These values are
- * the results from the DOS speed test program supplied from UMC. 11 is the
- * highest speed (about PIO mode 3)
- */
-#define REALLY_SLOW_IO		/* some systems can safely undef this */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "umc8672"
-
-/*
- * Default speeds.  These can be changed with "auto-tune" and/or hdparm.
- */
-#define UMC_DRIVE0      1              /* DOS measured drive speeds */
-#define UMC_DRIVE1      1              /* 0 to 11 allowed */
-#define UMC_DRIVE2      1              /* 11 = Fastest Speed */
-#define UMC_DRIVE3      1              /* In case of crash reduce speed */
-
-static u8 current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3};
-static const u8 pio_to_umc [5] = {0, 3, 7, 10, 11};	/* rough guesses */
-
-/*       0    1    2    3    4    5    6    7    8    9    10   11      */
-static const u8 speedtab [3][12] = {
-	{0x0f, 0x0b, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1},
-	{0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1},
-	{0xff, 0xcb, 0xc0, 0x58, 0x36, 0x33, 0x23, 0x22, 0x21, 0x11, 0x10, 0x0}
-};
-
-static void out_umc(char port, char wert)
-{
-	outb_p(port, 0x108);
-	outb_p(wert, 0x109);
-}
-
-static inline u8 in_umc(char port)
-{
-	outb_p(port, 0x108);
-	return inb_p(0x109);
-}
-
-static void umc_set_speeds(u8 speeds[])
-{
-	int i, tmp;
-
-	outb_p(0x5A, 0x108); /* enable umc */
-
-	out_umc(0xd7, (speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
-	out_umc(0xd6, (speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
-	tmp = 0;
-	for (i = 3; i >= 0; i--)
-		tmp = (tmp << 2) | speedtab[1][speeds[i]];
-	out_umc(0xdc, tmp);
-	for (i = 0; i < 4; i++) {
-		out_umc(0xd0 + i, speedtab[2][speeds[i]]);
-		out_umc(0xd8 + i, speedtab[2][speeds[i]]);
-	}
-	outb_p(0xa5, 0x108); /* disable umc */
-
-	printk("umc8672: drive speeds [0 to 11]: %d %d %d %d\n",
-		speeds[0], speeds[1], speeds[2], speeds[3]);
-}
-
-static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	unsigned long flags;
-
-	printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
-		drive->name, pio, pio_to_umc[pio]);
-	spin_lock_irqsave(&ide_lock, flags);
-	if (hwif->mate && hwif->mate->hwgroup->handler) {
-		printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n");
-	} else {
-		current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
-		umc_set_speeds(current_speeds);
-	}
-	spin_unlock_irqrestore(&ide_lock, flags);
-}
-
-static const struct ide_port_ops umc8672_port_ops = {
-	.set_pio_mode		= umc_set_pio_mode,
-};
-
-static const struct ide_port_info umc8672_port_info __initdata = {
-	.name			= DRV_NAME,
-	.chipset		= ide_umc8672,
-	.port_ops		= &umc8672_port_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-	.pio_mask		= ATA_PIO4,
-};
-
-static int __init umc8672_probe(void)
-{
-	unsigned long flags;
-
-	if (!request_region(0x108, 2, "umc8672")) {
-		printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n");
-		return 1;
-	}
-	local_irq_save(flags);
-	outb_p(0x5A, 0x108); /* enable umc */
-	if (in_umc (0xd5) != 0xa0) {
-		local_irq_restore(flags);
-		printk(KERN_ERR "umc8672: not found\n");
-		release_region(0x108, 2);
-		return 1;
-	}
-	outb_p(0xa5, 0x108); /* disable umc */
-
-	umc_set_speeds(current_speeds);
-	local_irq_restore(flags);
-
-	return ide_legacy_device_add(&umc8672_port_info, 0);
-}
-
-static int probe_umc8672;
-
-module_param_named(probe, probe_umc8672, bool, 0);
-MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");
-
-static int __init umc8672_init(void)
-{
-	if (probe_umc8672 == 0)
-		goto out;
-
-	if (umc8672_probe() == 0)
-		return 0;;
-out:
-	return -ENODEV;;
-}
-
-module_init(umc8672_init);
-
-MODULE_AUTHOR("Wolfram Podien");
-MODULE_DESCRIPTION("Support for UMC 8672 IDE chipset");
-MODULE_LICENSE("GPL");