ide: remove hwif->autodma and drive->autodma

* hpt34x.c: disable DMA masks for HPT345
  (hwif->autodma is zero so DMA won't be enabled anyway).

* trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag
  (hwif->autodma is zero so DMA won't be enabled anyway).

* Check noautodma global variable instead of drive->autodma in ide_tune_dma().

  This fixes handling of "ide=nodma" kernel parameter for icside, ide-cris,
  au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers.

* Remove hwif->autodma (it was not checked by IDE core code anyway) and
  drive->autodma (was set by all host drivers - except HPT345/TRM290 special
  cases - unless "ide=nodma" was used).

While at it:
- remove needless printk() from icside.c
- remove stale FIXME/comment from ide-probe.c
- don't force DMA off if PCI bus-mastering had to be enabled in setup-pci.c
  (this setting was always later over-ridden by host drivers anyway)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 5 deletions

diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index cd00081fb27..47c035a550e 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -700,19 +700,14 @@ static int au_ide_probe(struct device *dev)
 	hwif->dma_lost_irq		= &auide_dma_lost_irq;
 	hwif->ide_dma_on                = &auide_dma_on;
 
-	hwif->autodma                   = 1;
-	hwif->drives[0].autodma         = hwif->autodma;
-	hwif->drives[1].autodma         = hwif->autodma;
 	hwif->atapi_dma                 = 1;
 
 #else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
-	hwif->autodma                   = 0;
 	hwif->channel                   = 0;
 	hwif->hold                      = 1;
 	hwif->select_data               = 0;    /* no chipset-specific code */
 	hwif->config_data               = 0;    /* no chipset-specific code */
 
-	hwif->drives[0].autodma         = 0;
 	hwif->drives[0].autotune        = 1;    /* 1=autotune, 2=noautotune, 0=default */
 #endif
 	hwif->drives[0].no_io_32bit     = 1;