Merge ../linus

Conflicts:

	drivers/cpufreq/cpufreq.c

1 files changed, 384 insertions, 119 deletions

diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 6c097e80b4d..7cb48576e47 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -9,6 +9,7 @@
  *  Split from:
  *  linux/drivers/ide/pdc202xx.c	Version 0.35	Mar. 30, 2002
  *  Copyright (C) 1998-2002		Andre Hedrick <andre@linux-ide.org>
+ *  Copyright (C) 2005-2006		MontaVista Software, Inc.
  *  Portions Copyright (C) 1999 Promise Technology, Inc.
  *  Author: Frank Tiernan (frankt@promise.com)
  *  Released under terms of General Public License
@@ -38,6 +39,14 @@
 
 #define PDC202_DEBUG_CABLE	0
 
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
 static const char *pdc_quirk_drives[] = {
 	"QUANTUM FIREBALLlct08 08",
 	"QUANTUM FIREBALLP KA6.4",
@@ -50,37 +59,11 @@ static const char *pdc_quirk_drives[] = {
 	NULL
 };
 
-#define set_2regs(a, b)					\
-	do {						\
-		hwif->OUTB((a + adj), indexreg);	\
-		hwif->OUTB(b, datareg);			\
-	} while(0)
-
-#define set_ultra(a, b, c)				\
-	do {						\
-		set_2regs(0x10,(a));			\
-		set_2regs(0x11,(b));			\
-		set_2regs(0x12,(c));			\
-	} while(0)
-
-#define set_ata2(a, b)					\
-	do {						\
-		set_2regs(0x0e,(a));			\
-		set_2regs(0x0f,(b));			\
-	} while(0)
-
-#define set_pio(a, b, c)				\
-	do { 						\
-		set_2regs(0x0c,(a));			\
-		set_2regs(0x0d,(b));			\
-		set_2regs(0x13,(c));			\
-	} while(0)
-
-static u8 pdcnew_ratemask (ide_drive_t *drive)
+static u8 max_dma_rate(struct pci_dev *pdev)
 {
 	u8 mode;
 
-	switch(HWIF(drive)->pci_dev->device) {
+	switch(pdev->device) {
 		case PCI_DEVICE_ID_PROMISE_20277:
 		case PCI_DEVICE_ID_PROMISE_20276:
 		case PCI_DEVICE_ID_PROMISE_20275:
@@ -95,12 +78,21 @@ static u8 pdcnew_ratemask (ide_drive_t *drive)
 		default:
 			return 0;
 	}
-	if (!eighty_ninty_three(drive))
-		mode = min(mode, (u8)1);
+
 	return mode;
 }
 
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
+static u8 pdcnew_ratemask(ide_drive_t *drive)
+{
+	u8 mode = max_dma_rate(HWIF(drive)->pci_dev);
+
+	if (!eighty_ninty_three(drive))
+		mode = min_t(u8, mode, 1);
+
+	return	mode;
+}
+
+static int check_in_drive_lists(ide_drive_t *drive, const char **list)
 {
 	struct hd_driveid *id = drive->id;
 
@@ -120,43 +112,141 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list)
 	return 0;
 }
 
-static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+/**
+ * get_indexed_reg - Get indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
+{
+	u8 value;
+
+	hwif->OUTB(index, hwif->dma_vendor1);
+	value = hwif->INB(hwif->dma_vendor3);
+
+	DBG("index[%02X] value[%02X]\n", index, value);
+	return value;
+}
+
+/**
+ * set_indexed_reg - Set indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
+{
+	hwif->OUTB(index, hwif->dma_vendor1);
+	hwif->OUTB(value, hwif->dma_vendor3);
+	DBG("index[%02X] value[%02X]\n", index, value);
+}
+
+/*
+ * ATA Timing Tables based on 133 MHz PLL output clock.
+ *
+ * If the PLL outputs 100 MHz clock, the ASIC hardware will set
+ * the timing registers automatically when "set features" command is
+ * issued to the device. However, if the PLL output clock is 133 MHz,
+ * the following tables must be used.
+ */
+static struct pio_timing {
+	u8 reg0c, reg0d, reg13;
+} pio_timings [] = {
+	{ 0xfb, 0x2b, 0xac },	/* PIO mode 0, IORDY off, Prefetch off */
+	{ 0x46, 0x29, 0xa4 },	/* PIO mode 1, IORDY off, Prefetch off */
+	{ 0x23, 0x26, 0x64 },	/* PIO mode 2, IORDY off, Prefetch off */
+	{ 0x27, 0x0d, 0x35 },	/* PIO mode 3, IORDY on,  Prefetch off */
+	{ 0x23, 0x09, 0x25 },	/* PIO mode 4, IORDY on,  Prefetch off */
+};
+
+static struct mwdma_timing {
+	u8 reg0e, reg0f;
+} mwdma_timings [] = {
+	{ 0xdf, 0x5f }, 	/* MWDMA mode 0 */
+	{ 0x6b, 0x27 }, 	/* MWDMA mode 1 */
+	{ 0x69, 0x25 }, 	/* MWDMA mode 2 */
+};
+
+static struct udma_timing {
+	u8 reg10, reg11, reg12;
+} udma_timings [] = {
+	{ 0x4a, 0x0f, 0xd5 },	/* UDMA mode 0 */
+	{ 0x3a, 0x0a, 0xd0 },	/* UDMA mode 1 */
+	{ 0x2a, 0x07, 0xcd },	/* UDMA mode 2 */
+	{ 0x1a, 0x05, 0xcd },	/* UDMA mode 3 */
+	{ 0x1a, 0x03, 0xcd },	/* UDMA mode 4 */
+	{ 0x1a, 0x02, 0xcb },	/* UDMA mode 5 */
+	{ 0x1a, 0x01, 0xcb },	/* UDMA mode 6 */
+};
+
+static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long indexreg	= hwif->dma_vendor1;
-	unsigned long datareg	= hwif->dma_vendor3;
-	u8 thold		= 0x10;
-	u8 adj			= (drive->dn%2) ? 0x08 : 0x00;
-	u8 speed		= ide_rate_filter(pdcnew_ratemask(drive), xferspeed);
-
-	if (speed == XFER_UDMA_2) {
-		hwif->OUTB((thold + adj), indexreg);
-		hwif->OUTB((hwif->INB(datareg) & 0x7f), datareg);
-	}
+	u8 adj			= (drive->dn & 1) ? 0x08 : 0x00;
+	int			err;
 
-	switch (speed) {
-		case XFER_UDMA_7:
-			speed = XFER_UDMA_6;
-		case XFER_UDMA_6:	set_ultra(0x1a, 0x01, 0xcb); break;
-		case XFER_UDMA_5:	set_ultra(0x1a, 0x02, 0xcb); break;
-		case XFER_UDMA_4:	set_ultra(0x1a, 0x03, 0xcd); break;
-		case XFER_UDMA_3:	set_ultra(0x1a, 0x05, 0xcd); break;
-		case XFER_UDMA_2:	set_ultra(0x2a, 0x07, 0xcd); break;
-		case XFER_UDMA_1:	set_ultra(0x3a, 0x0a, 0xd0); break;
-		case XFER_UDMA_0:	set_ultra(0x4a, 0x0f, 0xd5); break;
-		case XFER_MW_DMA_2:	set_ata2(0x69, 0x25); break;
-		case XFER_MW_DMA_1:	set_ata2(0x6b, 0x27); break;
-		case XFER_MW_DMA_0:	set_ata2(0xdf, 0x5f); break;
-		case XFER_PIO_4:	set_pio(0x23, 0x09, 0x25); break;
-		case XFER_PIO_3:	set_pio(0x27, 0x0d, 0x35); break;
-		case XFER_PIO_2:	set_pio(0x23, 0x26, 0x64); break;
-		case XFER_PIO_1:	set_pio(0x46, 0x29, 0xa4); break;
-		case XFER_PIO_0:	set_pio(0xfb, 0x2b, 0xac); break;
-		default:
-			;
-	}
+	speed = ide_rate_filter(pdcnew_ratemask(drive), speed);
+
+	/*
+	 * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will
+	 * automatically set the timing registers based on 100 MHz PLL output.
+	 */
+ 	err = ide_config_drive_speed(drive, speed);
+
+	/*
+	 * As we set up the PLL to output 133 MHz for UltraDMA/133 capable
+	 * chips, we must override the default register settings...
+	 */
+	if (max_dma_rate(hwif->pci_dev) == 4) {
+		u8 mode = speed & 0x07;
+
+		switch (speed) {
+			case XFER_UDMA_6:
+			case XFER_UDMA_5:
+			case XFER_UDMA_4:
+			case XFER_UDMA_3:
+			case XFER_UDMA_2:
+			case XFER_UDMA_1:
+			case XFER_UDMA_0:
+				set_indexed_reg(hwif, 0x10 + adj,
+						udma_timings[mode].reg10);
+				set_indexed_reg(hwif, 0x11 + adj,
+						udma_timings[mode].reg11);
+				set_indexed_reg(hwif, 0x12 + adj,
+						udma_timings[mode].reg12);
+				break;
+
+			case XFER_MW_DMA_2:
+			case XFER_MW_DMA_1:
+			case XFER_MW_DMA_0:
+				set_indexed_reg(hwif, 0x0e + adj,
+						mwdma_timings[mode].reg0e);
+				set_indexed_reg(hwif, 0x0f + adj,
+						mwdma_timings[mode].reg0f);
+				break;
+			case XFER_PIO_4:
+			case XFER_PIO_3:
+			case XFER_PIO_2:
+			case XFER_PIO_1:
+			case XFER_PIO_0:
+				set_indexed_reg(hwif, 0x0c + adj,
+						pio_timings[mode].reg0c);
+				set_indexed_reg(hwif, 0x0d + adj,
+						pio_timings[mode].reg0d);
+				set_indexed_reg(hwif, 0x13 + adj,
+						pio_timings[mode].reg13);
+				break;
+			default:
+				printk(KERN_ERR "pdc202xx_new: "
+				       "Unknown speed %d ignored\n", speed);
+		}
+	} else if (speed == XFER_UDMA_2) {
+		/* Set tHOLD bit to 0 if using UDMA mode 2 */
+		u8 tmp = get_indexed_reg(hwif, 0x10 + adj);
 
-	return (ide_config_drive_speed(drive, speed));
+		set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f);
+ 	}
+
+	return err;
 }
 
 /*   0    1    2    3    4    5    6   7   8
@@ -168,55 +258,55 @@ static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed)
  */
 static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
 {
-	u8 speed;
-
-	if (pio == 5) pio = 4;
-	speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL);
-
-	(void)pdcnew_new_tune_chipset(drive, speed);
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+	(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
 }
 
-static u8 pdcnew_new_cable_detect (ide_hwif_t *hwif)
+static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
 {
-	hwif->OUTB(0x0b, hwif->dma_vendor1);
-	return ((u8)((hwif->INB(hwif->dma_vendor3) & 0x04)));
+	return get_indexed_reg(hwif, 0x0b) & 0x04;
 }
-static int config_chipset_for_dma (ide_drive_t *drive)
+
+static int config_chipset_for_dma(ide_drive_t *drive)
 {
 	struct hd_driveid *id	= drive->id;
 	ide_hwif_t *hwif	= HWIF(drive);
-	u8 speed		= -1;
-	u8 cable;
-
-	u8 ultra_66		= ((id->dma_ultra & 0x0010) ||
-				   (id->dma_ultra & 0x0008)) ? 1 : 0;
-
-	cable = pdcnew_new_cable_detect(hwif);
+	u8 ultra_66		= (id->dma_ultra & 0x0078) ? 1 : 0;
+	u8 cable		= pdcnew_cable_detect(hwif);
+	u8 speed;
 
 	if (ultra_66 && cable) {
-		printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
+		printk(KERN_WARNING "Warning: %s channel "
+		       "requires an 80-pin cable for operation.\n",
+		       hwif->channel ? "Secondary" : "Primary");
 		printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
 	}
 
 	if (drive->media != ide_disk)
 		return 0;
-	if (id->capability & 4) {	/* IORDY_EN & PREFETCH_EN */
-		hwif->OUTB((0x13 + ((drive->dn%2) ? 0x08 : 0x00)), hwif->dma_vendor1);
-		hwif->OUTB((hwif->INB(hwif->dma_vendor3)|0x03), hwif->dma_vendor3);
+
+	if (id->capability & 4) {
+		/*
+		 * Set IORDY_EN & PREFETCH_EN (this seems to have
+		 * NO real effect since this register is reloaded
+		 * by hardware when the transfer mode is selected)
+		 */
+		u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00;
+
+		tmp = get_indexed_reg(hwif, 0x13 + adj);
+		set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03);
 	}
 
 	speed = ide_dma_speed(drive, pdcnew_ratemask(drive));
 
-	if (!(speed)) {
-		hwif->tuneproc(drive, 5);
+	if (!speed)
 		return 0;
-	}
 
 	(void) hwif->speedproc(drive, speed);
 	return ide_dma_enable(drive);
 }
 
-static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive)
+static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct hd_driveid *id	= drive->id;
@@ -234,16 +324,16 @@ static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive)
 
 	} else if ((id->capability & 8) || (id->field_valid & 2)) {
 fast_ata_pio:
-		hwif->tuneproc(drive, 5);
+		hwif->tuneproc(drive, 255);
 		return hwif->ide_dma_off_quietly(drive);
 	}
 	/* IORDY not supported */
 	return 0;
 }
 
-static int pdcnew_quirkproc (ide_drive_t *drive)
+static int pdcnew_quirkproc(ide_drive_t *drive)
 {
-	return ((int) check_in_drive_lists(drive, pdc_quirk_drives));
+	return check_in_drive_lists(drive, pdc_quirk_drives);
 }
 
 static int pdcnew_ide_dma_lostirq(ide_drive_t *drive)
@@ -260,21 +350,100 @@ static int pdcnew_ide_dma_timeout(ide_drive_t *drive)
 	return __ide_dma_timeout(drive);
 }
 
-static void pdcnew_new_reset (ide_drive_t *drive)
+static void pdcnew_reset(ide_drive_t *drive)
 {
 	/*
 	 * Deleted this because it is redundant from the caller.
 	 */
-	printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
+	printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n",
 		HWIF(drive)->channel ? "Secondary" : "Primary");
 }
 
+/**
+ * read_counter - Read the byte count registers
+ * @dma_base: for the port address
+ */
+static long __devinit read_counter(u32 dma_base)
+{
+	u32  pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08;
+	u8   cnt0, cnt1, cnt2, cnt3;
+	long count = 0, last;
+	int  retry = 3;
+
+	do {
+		last = count;
+
+		/* Read the current count */
+		outb(0x20, pri_dma_base + 0x01);
+		cnt0 = inb(pri_dma_base + 0x03);
+		outb(0x21, pri_dma_base + 0x01);
+		cnt1 = inb(pri_dma_base + 0x03);
+		outb(0x20, sec_dma_base + 0x01);
+		cnt2 = inb(sec_dma_base + 0x03);
+		outb(0x21, sec_dma_base + 0x01);
+		cnt3 = inb(sec_dma_base + 0x03);
+
+		count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0;
+
+		/*
+		 * The 30-bit decrementing counter is read in 4 pieces.
+		 * Incorrect value may be read when the most significant bytes
+		 * are changing...
+		 */
+	} while (retry-- && (((last ^ count) & 0x3fff8000) || last < count));
+
+	DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n",
+		  cnt0, cnt1, cnt2, cnt3);
+
+	return count;
+}
+
+/**
+ * detect_pll_input_clock - Detect the PLL input clock in Hz.
+ * @dma_base: for the port address
+ * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock.
+ */
+static long __devinit detect_pll_input_clock(unsigned long dma_base)
+{
+	long start_count, end_count;
+	long pll_input;
+	u8 scr1;
+
+	start_count = read_counter(dma_base);
+
+	/* Start the test mode */
+	outb(0x01, dma_base + 0x01);
+	scr1 = inb(dma_base + 0x03);
+	DBG("scr1[%02X]\n", scr1);
+	outb(scr1 | 0x40, dma_base + 0x03);
+
+	/* Let the counter run for 10 ms. */
+	mdelay(10);
+
+	end_count = read_counter(dma_base);
+
+	/* Stop the test mode */
+	outb(0x01, dma_base + 0x01);
+	scr1 = inb(dma_base + 0x03);
+	DBG("scr1[%02X]\n", scr1);
+	outb(scr1 & ~0x40, dma_base + 0x03);
+
+	/*
+	 * Calculate the input clock in Hz
+	 * (the clock counter is 30 bit wide and counts down)
+	 */
+	pll_input = ((start_count - end_count) & 0x3ffffff) * 100;
+
+	DBG("start[%ld] end[%ld]\n", start_count, end_count);
+
+	return pll_input;
+}
+
 #ifdef CONFIG_PPC_PMAC
 static void __devinit apple_kiwi_init(struct pci_dev *pdev)
 {
 	struct device_node *np = pci_device_to_OF_node(pdev);
 	unsigned int class_rev = 0;
-	void __iomem *mmio;
 	u8 conf;
 
 	if (np == NULL || !device_is_compatible(np, "kiwi-root"))
@@ -285,30 +454,20 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev)
 
 	if (class_rev >= 0x03) {
 		/* Setup chip magic config stuff (from darwin) */
-		pci_read_config_byte(pdev, 0x40, &conf);
-		pci_write_config_byte(pdev, 0x40, conf | 0x01);
-	}
-	mmio = ioremap(pci_resource_start(pdev, 5),
-				      pci_resource_len(pdev, 5));
-
-	/* Setup some PLL stuffs */
-	switch (pdev->device) {
-	case PCI_DEVICE_ID_PROMISE_20270:
-		writew(0x0d2b, mmio + 0x1202);
-		mdelay(30);
-		break;
-	case PCI_DEVICE_ID_PROMISE_20271:
-		writew(0x0826, mmio + 0x1202);
-		mdelay(30);
-		break;
+		pci_read_config_byte (pdev, 0x40, &conf);
+		pci_write_config_byte(pdev, 0x40, (conf | 0x01));
 	}
-
-	iounmap(mmio);
 }
 #endif /* CONFIG_PPC_PMAC */
 
 static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name)
 {
+	unsigned long dma_base = pci_resource_start(dev, 4);
+	unsigned long sec_dma_base = dma_base + 0x08;
+	long pll_input, pll_output, ratio;
+	int f, r;
+	u8 pll_ctl0, pll_ctl1;
+
 	if (dev->resource[PCI_ROM_RESOURCE].start) {
 		pci_write_config_dword(dev, PCI_ROM_ADDRESS,
 			dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
@@ -320,6 +479,106 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
 	apple_kiwi_init(dev);
 #endif
 
+	/* Calculate the required PLL output frequency */
+	switch(max_dma_rate(dev)) {
+		case 4: /* it's 133 MHz for Ultra133 chips */
+			pll_output = 133333333;
+			break;
+		case 3: /* and  100 MHz for Ultra100 chips */
+		default:
+			pll_output = 100000000;
+			break;
+	}
+
+	/*
+	 * Detect PLL input clock.
+	 * On some systems, where PCI bus is running at non-standard clock rate
+	 * (e.g. 25 or 40 MHz), we have to adjust the cycle time.
+	 * PDC20268 and newer chips employ PLL circuit to help correct timing
+	 * registers setting.
+	 */
+	pll_input = detect_pll_input_clock(dma_base);
+	printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000);
+
+	/* Sanity check */
+	if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
+		printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n",
+		       name, pll_input);
+		goto out;
+	}
+
+#ifdef DEBUG
+	DBG("pll_output is %ld Hz\n", pll_output);
+
+	/* Show the current clock value of PLL control register
+	 * (maybe already configured by the BIOS)
+	 */
+	outb(0x02, sec_dma_base + 0x01);
+	pll_ctl0 = inb(sec_dma_base + 0x03);
+	outb(0x03, sec_dma_base + 0x01);
+	pll_ctl1 = inb(sec_dma_base + 0x03);
+
+	DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+#endif
+
+	/*
+	 * Calculate the ratio of F, R and NO
+	 * POUT = (F + 2) / (( R + 2) * NO)
+	 */
+	ratio = pll_output / (pll_input / 1000);
+	if (ratio < 8600L) { /* 8.6x */
+		/* Using NO = 0x01, R = 0x0d */
+		r = 0x0d;
+	} else if (ratio < 12900L) { /* 12.9x */
+		/* Using NO = 0x01, R = 0x08 */
+		r = 0x08;
+	} else if (ratio < 16100L) { /* 16.1x */
+		/* Using NO = 0x01, R = 0x06 */
+		r = 0x06;
+	} else if (ratio < 64000L) { /* 64x */
+		r = 0x00;
+	} else {
+		/* Invalid ratio */
+		printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio);
+		goto out;
+	}
+
+	f = (ratio * (r + 2)) / 1000 - 2;
+
+	DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio);
+
+	if (unlikely(f < 0 || f > 127)) {
+		/* Invalid F */
+		printk(KERN_ERR "%s: F[%d] invalid!\n", name, f);
+		goto out;
+	}
+
+	pll_ctl0 = (u8) f;
+	pll_ctl1 = (u8) r;
+
+	DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+
+	outb(0x02,     sec_dma_base + 0x01);
+	outb(pll_ctl0, sec_dma_base + 0x03);
+	outb(0x03,     sec_dma_base + 0x01);
+	outb(pll_ctl1, sec_dma_base + 0x03);
+
+	/* Wait the PLL circuit to be stable */
+	mdelay(30);
+
+#ifdef DEBUG
+	/*
+	 *  Show the current clock value of PLL control register
+	 */
+	outb(0x02, sec_dma_base + 0x01);
+	pll_ctl0 = inb(sec_dma_base + 0x03);
+	outb(0x03, sec_dma_base + 0x01);
+	pll_ctl1 = inb(sec_dma_base + 0x03);
+
+	DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+#endif
+
+ out:
 	return dev->irq;
 }
 
@@ -329,8 +588,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
 
 	hwif->tuneproc  = &pdcnew_tune_drive;
 	hwif->quirkproc = &pdcnew_quirkproc;
-	hwif->speedproc = &pdcnew_new_tune_chipset;
-	hwif->resetproc = &pdcnew_new_reset;
+	hwif->speedproc = &pdcnew_tune_chipset;
+	hwif->resetproc = &pdcnew_reset;
 
 	hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
 
@@ -342,11 +601,14 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
 	hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate;
 	hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq;
 	hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout;
-	if (!(hwif->udma_four))
-		hwif->udma_four = (pdcnew_new_cable_detect(hwif)) ? 0 : 1;
+
+	if (!hwif->udma_four)
+		hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1;
+
 	if (!noautodma)
 		hwif->autodma = 1;
 	hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
+
 #if PDC202_DEBUG_CABLE
 	printk(KERN_DEBUG "%s: %s-pin cable\n",
 		hwif->name, hwif->udma_four ? "80" : "40");
@@ -362,6 +624,7 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev,
 					 ide_pci_device_t *d)
 {
 	struct pci_dev *findev = NULL;
+	int ret;
 
 	if ((dev->bus->self &&
 	     dev->bus->self->vendor == PCI_VENDOR_ID_DEC) &&
@@ -369,14 +632,16 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev,
 		if (PCI_SLOT(dev->devfn) & 2)
 			return -ENODEV;
 		d->extra = 0;
-		while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
+		while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
 			if ((findev->vendor == dev->vendor) &&
 			    (findev->device == dev->device) &&
 			    (PCI_SLOT(findev->devfn) & 2)) {
 				if (findev->irq != dev->irq) {
 					findev->irq = dev->irq;
 				}
-				return ide_setup_pci_devices(dev, findev, d);
+				ret = ide_setup_pci_devices(dev, findev, d);
+				pci_dev_put(findev);
+				return ret;
 			}
 		}
 	}