Merge branch 'linus' into test

Conflicts:
	MAINTAINERS
	arch/x86/kernel/acpi/boot.c
	arch/x86/kernel/acpi/sleep.c
	drivers/acpi/Kconfig
	drivers/pnp/Makefile
	drivers/pnp/quirks.c

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 33 insertions, 68 deletions

diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 681306c9d79..8af9b23499f 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 2008 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License
@@ -22,7 +23,6 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
-#include <linux/hdreg.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/ioport.h>
@@ -101,18 +101,8 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
 	for (i = 0; i <= 7; i++)
 		hw->io_ports_array[i] = reg + i * 4;
 
-	if (ctrl_port)
-		hw->io_ports.ctl_addr = ctrl_port;
-
-	if (irq_port)
-		hw->io_ports.irq_addr = irq_port;
-}
-
-static void
-sgiioc4_maskproc(ide_drive_t * drive, int mask)
-{
-	writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0),
-	       (void __iomem *)drive->hwif->io_ports.ctl_addr);
+	hw->io_ports.ctl_addr = ctrl_port;
+	hw->io_ports.irq_addr = irq_port;
 }
 
 static int
@@ -151,7 +141,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
 		int count = 0;
 
 		stat = sgiioc4_read_status(hwif);
-		while ((stat & 0x80) && (count++ < 100)) {
+		while ((stat & ATA_BUSY) && (count++ < 100)) {
 			udelay(1);
 			stat = sgiioc4_read_status(hwif);
 		}
@@ -310,16 +300,14 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
 	unsigned long port = hwif->io_ports.status_addr;
 	u8 reg = (u8) readb((void __iomem *) port);
 
-	if ((port & 0xFFF) == 0x11C) {	/* Status register of IOC4 */
-		if (reg & 0x51) {	/* Not busy...check for interrupt */
-			unsigned long other_ir = port - 0x110;
-			unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
+	if (!(reg & ATA_BUSY)) {	/* Not busy... check for interrupt */
+		unsigned long other_ir = port - 0x110;
+		unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 
-			/* Clear the Interrupt, Error bits on the IOC4 */
-			if (intr_reg & 0x03) {
-				writel(0x03, (void __iomem *) other_ir);
-				intr_reg = (u32) readl((void __iomem *) other_ir);
-			}
+		/* Clear the Interrupt, Error bits on the IOC4 */
+		if (intr_reg & 0x03) {
+			writel(0x03, (void __iomem *) other_ir);
+			intr_reg = (u32) readl((void __iomem *) other_ir);
 		}
 	}
 
@@ -332,42 +320,28 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
-	void __iomem *virt_dma_base;
 	int num_ports = sizeof (ioc4_dma_regs_t);
 	void *pad;
 
-	if (dma_base == 0)
-		return -1;
+	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
 
-	printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
-	       dma_base, dma_base + num_ports - 1);
-
-	if (!request_mem_region(dma_base, num_ports, hwif->name)) {
-		printk(KERN_ERR
-		       "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
-		       "ALREADY in use\n",
-		       __func__, hwif->name, (void *) dma_base,
-		       (void *) dma_base + num_ports - 1);
+	if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
+		printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
+		       "already in use\n", __func__, hwif->name,
+		       dma_base, dma_base + num_ports - 1);
 		return -1;
 	}
 
-	virt_dma_base = ioremap(dma_base, num_ports);
-	if (virt_dma_base == NULL) {
-		printk(KERN_ERR
-		       "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
-		       __func__, hwif->name, dma_base, dma_base + num_ports - 1);
-		goto dma_remap_failure;
-	}
-	hwif->dma_base = (unsigned long) virt_dma_base;
+	hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
+			 IOC4_DMA_OFFSET;
 
-	hwif->dmatable_cpu = pci_alloc_consistent(dev,
-					  IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
-					  &hwif->dmatable_dma);
+	hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 
-	if (!hwif->dmatable_cpu)
-		goto dma_pci_alloc_failure;
+	hwif->prd_max_nents = IOC4_PRD_ENTRIES;
+	hwif->prd_ent_size = IOC4_PRD_BYTES;
 
-	hwif->sg_max_nents = IOC4_PRD_ENTRIES;
+	if (ide_allocate_dma_engine(hwif))
+		goto dma_pci_alloc_failure;
 
 	pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
 				   (dma_addr_t *)&hwif->extra_base);
@@ -376,18 +350,13 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 		return 0;
 	}
 
-	pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
-			    hwif->dmatable_cpu, hwif->dmatable_dma);
-	printk(KERN_INFO
-	       "%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
+	ide_release_dma_engine(hwif);
+
+	printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
 	       __func__, hwif->name);
-	printk(KERN_INFO
-	       "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
+	printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
 
 dma_pci_alloc_failure:
-	iounmap(virt_dma_base);
-
-dma_remap_failure:
 	release_mem_region(dma_base, num_ports);
 
 	return -1;
@@ -569,8 +538,6 @@ static const struct ide_port_ops sgiioc4_port_ops = {
 	.set_dma_mode		= sgiioc4_set_dma_mode,
 	/* reset DMA engine, clear IRQs */
 	.resetproc		= sgiioc4_resetproc,
-	/* mask on/off NIEN register */
-	.maskproc		= sgiioc4_maskproc,
 };
 
 static const struct ide_dma_ops sgiioc4_dma_ops = {
@@ -618,14 +585,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
 
 	cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
-	if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
-	    DRV_NAME)) {
-		printk(KERN_ERR
-			"%s %s: -- ERROR, Addresses "
-			"0x%p to 0x%p ALREADY in use\n",
-		       DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
-		       (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
-		return -ENOMEM;
+	if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
+			       DRV_NAME) == NULL) {
+		printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
+		       "already in use\n", DRV_NAME, pci_name(dev),
+		       cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
+		return -EBUSY;
 	}
 
 	/* Initialize the IO registers */