summaryrefslogtreecommitdiffstats
path: root/drivers/ide/siimage.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/siimage.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/siimage.c')
-rw-r--r--drivers/ide/siimage.c857
1 files changed, 857 insertions, 0 deletions
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
new file mode 100644
index 00000000000..eb4faf92c57
--- /dev/null
+++ b/drivers/ide/siimage.c
@@ -0,0 +1,857 @@
+/*
+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ * Copyright (C) 2007-2008 MontaVista Software, Inc.
+ * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * Documentation for CMD680:
+ * http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2
+ *
+ * Documentation for SiI 3112:
+ * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
+ *
+ * Errata and other documentation only available under NDA.
+ *
+ *
+ * FAQ Items:
+ * If you are using Marvell SATA-IDE adapters with Maxtor drives
+ * ensure the system is set up for ATA100/UDMA5, not UDMA6.
+ *
+ * If you are using WD drives with SATA bridges you must set the
+ * drive to "Single". "Master" will hang.
+ *
+ * If you have strange problems with nVidia chipset systems please
+ * see the SI support documentation and update your system BIOS
+ * if necessary
+ *
+ * The Dell DRAC4 has some interesting features including effectively hot
+ * unplugging/replugging the virtual CD interface when the DRAC is reset.
+ * This often causes drivers/ide/siimage to panic but is ok with the rather
+ * smarter code in libata.
+ *
+ * TODO:
+ * - IORDY fixes
+ * - VDMA support
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#define DRV_NAME "siimage"
+
+/**
+ * pdev_is_sata - check if device is SATA
+ * @pdev: PCI device to check
+ *
+ * Returns true if this is a SATA controller
+ */
+
+static int pdev_is_sata(struct pci_dev *pdev)
+{
+#ifdef CONFIG_BLK_DEV_IDE_SATA
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_SII_3112:
+ case PCI_DEVICE_ID_SII_1210SA:
+ return 1;
+ case PCI_DEVICE_ID_SII_680:
+ return 0;
+ }
+ BUG();
+#endif
+ return 0;
+}
+
+/**
+ * is_sata - check if hwif is SATA
+ * @hwif: interface to check
+ *
+ * Returns true if this is a SATA controller
+ */
+
+static inline int is_sata(ide_hwif_t *hwif)
+{
+ return pdev_is_sata(to_pci_dev(hwif->dev));
+}
+
+/**
+ * siimage_selreg - return register base
+ * @hwif: interface
+ * @r: config offset
+ *
+ * Turn a config register offset into the right address in either
+ * PCI space or MMIO space to access the control register in question
+ * Thankfully this is a configuration operation, so isn't performance
+ * critical.
+ */
+
+static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
+{
+ unsigned long base = (unsigned long)hwif->hwif_data;
+
+ base += 0xA0 + r;
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ base += hwif->channel << 6;
+ else
+ base += hwif->channel << 4;
+ return base;
+}
+
+/**
+ * siimage_seldev - return register base
+ * @hwif: interface
+ * @r: config offset
+ *
+ * Turn a config register offset into the right address in either
+ * PCI space or MMIO space to access the control register in question
+ * including accounting for the unit shift.
+ */
+
+static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u8 unit = drive->dn & 1;
+
+ base += 0xA0 + r;
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ base += hwif->channel << 6;
+ else
+ base += hwif->channel << 4;
+ base |= unit << unit;
+ return base;
+}
+
+static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ u8 tmp = 0;
+
+ if (host->host_priv)
+ tmp = readb((void __iomem *)addr);
+ else
+ pci_read_config_byte(dev, addr, &tmp);
+
+ return tmp;
+}
+
+static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ u16 tmp = 0;
+
+ if (host->host_priv)
+ tmp = readw((void __iomem *)addr);
+ else
+ pci_read_config_word(dev, addr, &tmp);
+
+ return tmp;
+}
+
+static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+
+ if (host->host_priv)
+ writeb(val, (void __iomem *)addr);
+ else
+ pci_write_config_byte(dev, addr, val);
+}
+
+static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+
+ if (host->host_priv)
+ writew(val, (void __iomem *)addr);
+ else
+ pci_write_config_word(dev, addr, val);
+}
+
+static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+
+ if (host->host_priv)
+ writel(val, (void __iomem *)addr);
+ else
+ pci_write_config_dword(dev, addr, val);
+}
+
+/**
+ * sil_udma_filter - compute UDMA mask
+ * @drive: IDE device
+ *
+ * Compute the available UDMA speeds for the device on the interface.
+ *
+ * For the CMD680 this depends on the clocking mode (scsc), for the
+ * SI3112 SATA controller life is a bit simpler.
+ */
+
+static u8 sil_pata_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u8 scsc, mask = 0;
+
+ base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A;
+
+ scsc = sil_ioread8(dev, base);
+
+ switch (scsc & 0x30) {
+ case 0x10: /* 133 */
+ mask = ATA_UDMA6;
+ break;
+ case 0x20: /* 2xPCI */
+ mask = ATA_UDMA6;
+ break;
+ case 0x00: /* 100 */
+ mask = ATA_UDMA5;
+ break;
+ default: /* Disabled ? */
+ BUG();
+ }
+
+ return mask;
+}
+
+static u8 sil_sata_udma_filter(ide_drive_t *drive)
+{
+ char *m = (char *)&drive->id[ATA_ID_PROD];
+
+ return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
+}
+
+/**
+ * sil_set_pio_mode - set host controller for PIO mode
+ * @drive: drive
+ * @pio: PIO mode number
+ *
+ * Load the timing settings for this device mode into the
+ * controller. If we are in PIO mode 3 or 4 turn on IORDY
+ * monitoring (bit 9). The TF timing is bits 31:16
+ */
+
+static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
+{
+ static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
+ static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
+
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ ide_drive_t *pair = ide_get_pair_dev(drive);
+ u32 speedt = 0;
+ u16 speedp = 0;
+ unsigned long addr = siimage_seldev(drive, 0x04);
+ unsigned long tfaddr = siimage_selreg(hwif, 0x02);
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u8 tf_pio = pio;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
+ : (mmio ? 0xB4 : 0x80);
+ u8 mode = 0;
+ u8 unit = drive->dn & 1;
+
+ /* trim *taskfile* PIO to the slowest of the master/slave */
+ if (pair) {
+ u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
+
+ if (pair_pio < tf_pio)
+ tf_pio = pair_pio;
+ }
+
+ /* cheat for now and use the docs */
+ speedp = data_speed[pio];
+ speedt = tf_speed[tf_pio];
+
+ sil_iowrite16(dev, speedp, addr);
+ sil_iowrite16(dev, speedt, tfaddr);
+
+ /* now set up IORDY */
+ speedp = sil_ioread16(dev, tfaddr - 2);
+ speedp &= ~0x200;
+ if (pio > 2)
+ speedp |= 0x200;
+ sil_iowrite16(dev, speedp, tfaddr - 2);
+
+ mode = sil_ioread8(dev, base + addr_mask);
+ mode &= ~(unit ? 0x30 : 0x03);
+ mode |= unit ? 0x10 : 0x01;
+ sil_iowrite8(dev, mode, base + addr_mask);
+}
+
+/**
+ * sil_set_dma_mode - set host controller for DMA mode
+ * @drive: drive
+ * @speed: DMA mode
+ *
+ * Tune the SiI chipset for the desired DMA mode.
+ */
+
+static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+ static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
+ static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
+ static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
+
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u16 ultra = 0, multi = 0;
+ u8 mode = 0, unit = drive->dn & 1;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
+ : (mmio ? 0xB4 : 0x80);
+ unsigned long ma = siimage_seldev(drive, 0x08);
+ unsigned long ua = siimage_seldev(drive, 0x0C);
+
+ scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
+ mode = sil_ioread8 (dev, base + addr_mask);
+ multi = sil_ioread16(dev, ma);
+ ultra = sil_ioread16(dev, ua);
+
+ mode &= ~(unit ? 0x30 : 0x03);
+ ultra &= ~0x3F;
+ scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
+
+ scsc = is_sata(hwif) ? 1 : scsc;
+
+ if (speed >= XFER_UDMA_0) {
+ multi = dma[2];
+ ultra |= scsc ? ultra6[speed - XFER_UDMA_0] :
+ ultra5[speed - XFER_UDMA_0];
+ mode |= unit ? 0x30 : 0x03;
+ } else {
+ multi = dma[speed - XFER_MW_DMA_0];
+ mode |= unit ? 0x20 : 0x02;
+ }
+
+ sil_iowrite8 (dev, mode, base + addr_mask);
+ sil_iowrite16(dev, multi, ma);
+ sil_iowrite16(dev, ultra, ua);
+}
+
+/* returns 1 if dma irq issued, 0 otherwise */
+static int siimage_io_dma_test_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u8 dma_altstat = 0;
+ unsigned long addr = siimage_selreg(hwif, 1);
+
+ /* return 1 if INTR asserted */
+ if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
+ return 1;
+
+ /* return 1 if Device INTR asserted */
+ pci_read_config_byte(dev, addr, &dma_altstat);
+ if (dma_altstat & 8)
+ return 0; /* return 1; */
+
+ return 0;
+}
+
+/**
+ * siimage_mmio_dma_test_irq - check we caused an IRQ
+ * @drive: drive we are testing
+ *
+ * Check if we caused an IDE DMA interrupt. We may also have caused
+ * SATA status interrupts, if so we clean them up and continue.
+ */
+
+static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long addr = siimage_selreg(hwif, 0x1);
+ void __iomem *sata_error_addr
+ = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
+
+ if (sata_error_addr) {
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u32 ext_stat = readl((void __iomem *)(base + 0x10));
+ u8 watchdog = 0;
+
+ if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
+ u32 sata_error = readl(sata_error_addr);
+
+ writel(sata_error, sata_error_addr);
+ watchdog = (sata_error & 0x00680000) ? 1 : 0;
+ printk(KERN_WARNING "%s: sata_error = 0x%08x, "
+ "watchdog = %d, %s\n",
+ drive->name, sata_error, watchdog, __func__);
+ } else
+ watchdog = (ext_stat & 0x8000) ? 1 : 0;
+
+ ext_stat >>= 16;
+ if (!(ext_stat & 0x0404) && !watchdog)
+ return 0;
+ }
+
+ /* return 1 if INTR asserted */
+ if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
+ return 1;
+
+ /* return 1 if Device INTR asserted */
+ if (readb((void __iomem *)addr) & 8)
+ return 0; /* return 1; */
+
+ return 0;
+}
+
+static int siimage_dma_test_irq(ide_drive_t *drive)
+{
+ if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
+ return siimage_mmio_dma_test_irq(drive);
+ else
+ return siimage_io_dma_test_irq(drive);
+}
+
+/**
+ * sil_sata_reset_poll - wait for SATA reset
+ * @drive: drive we are resetting
+ *
+ * Poll the SATA phy and see whether it has come back from the dead
+ * yet.
+ */
+
+static int sil_sata_reset_poll(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ void __iomem *sata_status_addr
+ = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
+
+ if (sata_status_addr) {
+ /* SATA Status is available only when in MMIO mode */
+ u32 sata_stat = readl(sata_status_addr);
+
+ if ((sata_stat & 0x03) != 0x03) {
+ printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
+ hwif->name, sata_stat);
+ return -ENXIO;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * sil_sata_pre_reset - reset hook
+ * @drive: IDE device being reset
+ *
+ * For the SATA devices we need to handle recalibration/geometry
+ * differently
+ */
+
+static void sil_sata_pre_reset(ide_drive_t *drive)
+{
+ if (drive->media == ide_disk) {
+ drive->special.b.set_geometry = 0;
+ drive->special.b.recalibrate = 0;
+ }
+}
+
+/**
+ * init_chipset_siimage - set up an SI device
+ * @dev: PCI device
+ *
+ * Perform the initial PCI set up for this device. Attempt to switch
+ * to 133 MHz clocking if the system isn't already set up to do it.
+ */
+
+static unsigned int init_chipset_siimage(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ void __iomem *ioaddr = host->host_priv;
+ unsigned long base, scsc_addr;
+ u8 rev = dev->revision, tmp;
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
+
+ if (ioaddr)
+ pci_set_master(dev);
+
+ base = (unsigned long)ioaddr;
+
+ if (ioaddr && pdev_is_sata(dev)) {
+ u32 tmp32, irq_mask;
+
+ /* make sure IDE0/1 interrupts are not masked */
+ irq_mask = (1 << 22) | (1 << 23);
+ tmp32 = readl(ioaddr + 0x48);
+ if (tmp32 & irq_mask) {
+ tmp32 &= ~irq_mask;
+ writel(tmp32, ioaddr + 0x48);
+ readl(ioaddr + 0x48); /* flush */
+ }
+ writel(0, ioaddr + 0x148);
+ writel(0, ioaddr + 0x1C8);
+ }
+
+ sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
+ sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
+
+ scsc_addr = base ? (base + 0x4A) : 0x8A;
+ tmp = sil_ioread8(dev, scsc_addr);
+
+ switch (tmp & 0x30) {
+ case 0x00:
+ /* On 100 MHz clocking, try and switch to 133 MHz */
+ sil_iowrite8(dev, tmp | 0x10, scsc_addr);
+ break;
+ case 0x30:
+ /* Clocking is disabled, attempt to force 133MHz clocking. */
+ sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
+ case 0x10:
+ /* On 133Mhz clocking. */
+ break;
+ case 0x20:
+ /* On PCIx2 clocking. */
+ break;
+ }
+
+ tmp = sil_ioread8(dev, scsc_addr);
+
+ sil_iowrite8 (dev, 0x72, base + 0xA1);
+ sil_iowrite16(dev, 0x328A, base + 0xA2);
+ sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
+ sil_iowrite32(dev, 0x43924392, base + 0xA8);
+ sil_iowrite32(dev, 0x40094009, base + 0xAC);
+ sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1);
+ sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2);
+ sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
+ sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
+ sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
+
+ if (base && pdev_is_sata(dev)) {
+ writel(0xFFFF0000, ioaddr + 0x108);
+ writel(0xFFFF0000, ioaddr + 0x188);
+ writel(0x00680000, ioaddr + 0x148);
+ writel(0x00680000, ioaddr + 0x1C8);
+ }
+
+ /* report the clocking mode of the controller */
+ if (!pdev_is_sata(dev)) {
+ static const char *clk_str[] =
+ { "== 100", "== 133", "== 2X PCI", "DISABLED!" };
+
+ tmp >>= 4;
+ printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
+ pci_name(dev), clk_str[tmp & 3]);
+ }
+
+ return 0;
+}
+
+/**
+ * init_mmio_iops_siimage - set up the iops for MMIO
+ * @hwif: interface to set up
+ *
+ * The basic setup here is fairly simple, we can use standard MMIO
+ * operations. However we do have to set the taskfile register offsets
+ * by hand as there isn't a standard defined layout for them this time.
+ *
+ * The hardware supports buffered taskfiles and also some rather nice
+ * extended PRD tables. For better SI3112 support use the libata driver
+ */
+
+static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct ide_host *host = pci_get_drvdata(dev);
+ void *addr = host->host_priv;
+ u8 ch = hwif->channel;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ unsigned long base;
+
+ /*
+ * Fill in the basic hwif bits
+ */
+ hwif->host_flags |= IDE_HFLAG_MMIO;
+
+ hwif->hwif_data = addr;
+
+ /*
+ * Now set up the hw. We have to do this ourselves as the
+ * MMIO layout isn't the same as the standard port based I/O.
+ */
+ memset(io_ports, 0, sizeof(*io_ports));
+
+ base = (unsigned long)addr;
+ if (ch)
+ base += 0xC0;
+ else
+ base += 0x80;
+
+ /*
+ * The buffered task file doesn't have status/control, so we
+ * can't currently use it sanely since we want to use LBA48 mode.
+ */
+ io_ports->data_addr = base;
+ io_ports->error_addr = base + 1;
+ io_ports->nsect_addr = base + 2;
+ io_ports->lbal_addr = base + 3;
+ io_ports->lbam_addr = base + 4;
+ io_ports->lbah_addr = base + 5;
+ io_ports->device_addr = base + 6;
+ io_ports->status_addr = base + 7;
+ io_ports->ctl_addr = base + 10;
+
+ if (pdev_is_sata(dev)) {
+ base = (unsigned long)addr;
+ if (ch)
+ base += 0x80;
+ hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104;
+ hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108;
+ hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100;
+ }
+
+ hwif->irq = dev->irq;
+
+ hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00);
+}
+
+static int is_dev_seagate_sata(ide_drive_t *drive)
+{
+ const char *s = (const char *)&drive->id[ATA_ID_PROD];
+ unsigned len = strnlen(s, ATA_ID_PROD_LEN);
+
+ if ((len > 4) && (!memcmp(s, "ST", 2)))
+ if ((!memcmp(s + len - 2, "AS", 2)) ||
+ (!memcmp(s + len - 3, "ASL", 3))) {
+ printk(KERN_INFO "%s: applying pessimistic Seagate "
+ "errata fix\n", drive->name);
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * sil_quirkproc - post probe fixups
+ * @drive: drive
+ *
+ * Called after drive probe we use this to decide whether the
+ * Seagate fixup must be applied. This used to be in init_iops but
+ * that can occur before we know what drives are present.
+ */
+
+static void sil_quirkproc(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ /* Try and rise the rqsize */
+ if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
+ hwif->rqsize = 128;
+}
+
+/**
+ * init_iops_siimage - set up iops
+ * @hwif: interface to set up
+ *
+ * Do the basic setup for the SIIMAGE hardware interface
+ * and then do the MMIO setup if we can. This is the first
+ * look in we get for setting up the hwif so that we
+ * can get the iops right before using them.
+ */
+
+static void __devinit init_iops_siimage(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct ide_host *host = pci_get_drvdata(dev);
+
+ hwif->hwif_data = NULL;
+
+ /* Pessimal until we finish probing */
+ hwif->rqsize = 15;
+
+ if (host->host_priv)
+ init_mmio_iops_siimage(hwif);
+}
+
+/**
+ * sil_cable_detect - cable detection
+ * @hwif: interface to check
+ *
+ * Check for the presence of an ATA66 capable cable on the interface.
+ */
+
+static u8 sil_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long addr = siimage_selreg(hwif, 0);
+ u8 ata66 = sil_ioread8(dev, addr);
+
+ return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+}
+
+static const struct ide_port_ops sil_pata_port_ops = {
+ .set_pio_mode = sil_set_pio_mode,
+ .set_dma_mode = sil_set_dma_mode,
+ .quirkproc = sil_quirkproc,
+ .udma_filter = sil_pata_udma_filter,
+ .cable_detect = sil_cable_detect,
+};
+
+static const struct ide_port_ops sil_sata_port_ops = {
+ .set_pio_mode = sil_set_pio_mode,
+ .set_dma_mode = sil_set_dma_mode,
+ .reset_poll = sil_sata_reset_poll,
+ .pre_reset = sil_sata_pre_reset,
+ .quirkproc = sil_quirkproc,
+ .udma_filter = sil_sata_udma_filter,
+ .cable_detect = sil_cable_detect,
+};
+
+static const struct ide_dma_ops sil_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = ide_dma_start,
+ .dma_end = ide_dma_end,
+ .dma_test_irq = siimage_dma_test_irq,
+ .dma_timeout = ide_dma_timeout,
+ .dma_lost_irq = ide_dma_lost_irq,
+};
+
+#define DECLARE_SII_DEV(p_ops) \
+ { \
+ .name = DRV_NAME, \
+ .init_chipset = init_chipset_siimage, \
+ .init_iops = init_iops_siimage, \
+ .port_ops = p_ops, \
+ .dma_ops = &sil_dma_ops, \
+ .pio_mask = ATA_PIO4, \
+ .mwdma_mask = ATA_MWDMA2, \
+ .udma_mask = ATA_UDMA6, \
+ }
+
+static const struct ide_port_info siimage_chipsets[] __devinitdata = {
+ /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops),
+ /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
+};
+
+/**
+ * siimage_init_one - PCI layer discovery entry
+ * @dev: PCI device
+ * @id: ident table entry
+ *
+ * Called by the PCI code when it finds an SiI680 or SiI3112 controller.
+ * We then use the IDE PCI generic helper to do most of the work.
+ */
+
+static int __devinit siimage_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ void __iomem *ioaddr = NULL;
+ resource_size_t bar5 = pci_resource_start(dev, 5);
+ unsigned long barsize = pci_resource_len(dev, 5);
+ int rc;
+ struct ide_port_info d;
+ u8 idx = id->driver_data;
+ u8 BA5_EN;
+
+ d = siimage_chipsets[idx];
+
+ if (idx) {
+ static int first = 1;
+
+ if (first) {
+ printk(KERN_INFO DRV_NAME ": For full SATA support you "
+ "should use the libata sata_sil module.\n");
+ first = 0;
+ }
+
+ d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
+ }
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ pci_read_config_byte(dev, 0x8A, &BA5_EN);
+ if ((BA5_EN & 0x01) || bar5) {
+ /*
+ * Drop back to PIO if we can't map the MMIO. Some systems
+ * seem to get terminally confused in the PCI spaces.
+ */
+ if (!request_mem_region(bar5, barsize, d.name)) {
+ printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
+ "available\n", pci_name(dev));
+ } else {
+ ioaddr = ioremap(bar5, barsize);
+ if (ioaddr == NULL)
+ release_mem_region(bar5, barsize);
+ }
+ }
+
+ rc = ide_pci_init_one(dev, &d, ioaddr);
+ if (rc) {
+ if (ioaddr) {
+ iounmap(ioaddr);
+ release_mem_region(bar5, barsize);
+ }
+ pci_disable_device(dev);
+ }
+
+ return rc;
+}
+
+static void __devexit siimage_remove(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ void __iomem *ioaddr = host->host_priv;
+
+ ide_pci_remove(dev);
+
+ if (ioaddr) {
+ resource_size_t bar5 = pci_resource_start(dev, 5);
+ unsigned long barsize = pci_resource_len(dev, 5);
+
+ iounmap(ioaddr);
+ release_mem_region(bar5, barsize);
+ }
+
+ pci_disable_device(dev);
+}
+
+static const struct pci_device_id siimage_pci_tbl[] = {
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), 0 },
+#ifdef CONFIG_BLK_DEV_IDE_SATA
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112), 1 },
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
+#endif
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);
+
+static struct pci_driver siimage_pci_driver = {
+ .name = "SiI_IDE",
+ .id_table = siimage_pci_tbl,
+ .probe = siimage_init_one,
+ .remove = __devexit_p(siimage_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
+};
+
+static int __init siimage_ide_init(void)
+{
+ return ide_pci_register_driver(&siimage_pci_driver);
+}
+
+static void __exit siimage_ide_exit(void)
+{
+ pci_unregister_driver(&siimage_pci_driver);
+}
+
+module_init(siimage_ide_init);
+module_exit(siimage_ide_exit);
+
+MODULE_AUTHOR("Andre Hedrick, Alan Cox");
+MODULE_DESCRIPTION("PCI driver module for SiI IDE");
+MODULE_LICENSE("GPL");