Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
  MIPS: O32: Provide definition of registers ta0 .. ta3.
  MIPS: perf: Add Octeon support for hardware perf.
  MIPS: perf: Add support for 64-bit perf counters.
  MIPS: perf: Reorganize contents of perf support files.
  MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  MIPS: Add accessor macros for 64-bit performance counter registers.
  MIPS: Add probes for more Octeon II CPUs.
  MIPS: Add more CPU identifiers for Octeon II CPUs.
  MIPS: XLR, XLS: Add comment for smp setup
  MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
  MIPS: JZ4740: GPIO: Simplify IRQ demuxer
  MIPS: JZ4740: Use generic irq chip
  MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
  MIPS: Alchemy: kill au1xxx.h header
  MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
  MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
  MIPS: Alchemy: Redo PCI as platform driver
  MIPS: Alchemy: more base address cleanup
  MIPS: Alchemy: rewrite USB platform setup.
  MIPS: Alchemy: abstract USB block control register access
  ...

Fix up trivial conflicts in:
	arch/mips/alchemy/devboards/db1x00/platform.c
	drivers/ide/Kconfig
	drivers/mmc/host/au1xmmc.c
	drivers/video/Kconfig
	sound/mips/Kconfig

2 files changed, 30 insertions, 22 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 76b6d98bd29..5a26584934c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -677,19 +677,19 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
 
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
-       depends on SOC_AU1200
+       depends on MIPS_ALCHEMY
        select IDE_XFER_MODE
 choice
        prompt "IDE Mode for AMD Alchemy Au1200"
        default BLK_DEV_IDE_AU1XXX_PIO_DBDMA
-       depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+       depends on BLK_DEV_IDE_AU1XXX
 
 config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
        bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
 
 config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
-       depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+       depends on BLK_DEV_IDE_AU1XXX
 endchoice
 
 config BLK_DEV_IDE_TX4938
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index b26c23416fa..259786ca8b7 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -36,13 +36,17 @@
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1xxx_ide.h>
 
 #define DRV_NAME	"au1200-ide"
 #define DRV_AUTHOR	"Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
 
+#ifndef IDE_REG_SHIFT
+#define IDE_REG_SHIFT 5
+#endif
+
 /* enable the burstmode in the dbdma */
 #define IDE_AU1XXX_BURSTMODE	1
 
@@ -317,10 +321,11 @@ static void auide_ddma_rx_callback(int irq, void *param)
 }
 #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
 
-static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
+static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize,
+				 u32 devwidth, u32 flags, u32 regbase)
 {
 	dev->dev_id          = dev_id;
-	dev->dev_physaddr    = (u32)IDE_PHYS_ADDR;
+	dev->dev_physaddr    = CPHYSADDR(regbase);
 	dev->dev_intlevel    = 0;
 	dev->dev_intpolarity = 0;
 	dev->dev_tsize       = tsize;
@@ -344,7 +349,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 	dbdev_tab_t source_dev_tab, target_dev_tab;
 	u32 dev_id, tsize, devwidth, flags;
 
-	dev_id	 = IDE_DDMA_REQ;
+	dev_id	 = hwif->ddma_id;
 
 	tsize    =  8; /*  1 */
 	devwidth = 32; /* 16 */
@@ -356,20 +361,17 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 #endif
 
 	/* setup dev_tab for tx channel */
-	auide_init_dbdma_dev( &source_dev_tab,
-			      dev_id,
-			      tsize, devwidth, DEV_FLAGS_OUT | flags);
+	auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+			     DEV_FLAGS_OUT | flags, auide->regbase);
  	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 
-	auide_init_dbdma_dev( &source_dev_tab,
-			      dev_id,
-			      tsize, devwidth, DEV_FLAGS_IN | flags);
+	auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+			     DEV_FLAGS_IN | flags, auide->regbase);
  	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 	
 	/* We also need to add a target device for the DMA */
-	auide_init_dbdma_dev( &target_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      tsize, devwidth, DEV_FLAGS_ANYUSE);
+	auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize,
+			     devwidth, DEV_FLAGS_ANYUSE, auide->regbase);
 	auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);	
  
 	/* Get a channel for TX */
@@ -411,14 +413,12 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 #endif
 
 	/* setup dev_tab for tx channel */
-	auide_init_dbdma_dev( &source_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      8, 32, DEV_FLAGS_OUT | flags);
+	auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+			     DEV_FLAGS_OUT | flags, auide->regbase);
  	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 
-	auide_init_dbdma_dev( &source_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      8, 32, DEV_FLAGS_IN | flags);
+	auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+			     DEV_FLAGS_IN | flags, auide->regbase);
  	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 	
 	/* Get a channel for TX */
@@ -540,6 +540,14 @@ static int au_ide_probe(struct platform_device *dev)
 		goto out;
 	}
 
+	res = platform_get_resource(dev, IORESOURCE_DMA, 0);
+	if (!res) {
+		pr_debug("%s: no DDMA ID resource\n", DRV_NAME);
+		ret = -ENODEV;
+		goto out;
+	}
+	ahwif->ddma_id = res->start;
+
 	memset(&hw, 0, sizeof(hw));
 	auide_setup_ports(&hw, ahwif);
 	hw.irq = ahwif->irq;