ide: update references to Documentation/ide/ide.txt (v2)

Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2 files changed, 16 insertions, 16 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index df752e690e4..eed6d8e1b5c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -50,7 +50,7 @@ menuconfig IDE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide.
 
-	  For further information, please read <file:Documentation/ide.txt>.
+	  For further information, please read <file:Documentation/ide/ide.txt>.
 
 	  If unsure, say Y.
 
@@ -77,7 +77,7 @@ config BLK_DEV_IDE
 	  Useful information about large (>540 MB) IDE disks, multiple
 	  interfaces, what to do if ATA/IDE devices are not automatically
 	  detected, sound card ATA/IDE ports, module support, and other
-	  topics, is contained in <file:Documentation/ide.txt>. For detailed
+	  topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
 	  information about hard drives, consult the Disk-HOWTO and the
 	  Multi-Disk-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
@@ -87,7 +87,7 @@ config BLK_DEV_IDE
 	  <ftp://ibiblio.org/pub/Linux/system/hardware/>.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/ide.txt>. The module will be called ide-mod.
+	  <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
 	  Do not compile this driver as a module if your root file system (the
 	  one containing the directory /) is located on an IDE device.
 
@@ -98,7 +98,7 @@ config BLK_DEV_IDE
 
 if BLK_DEV_IDE
 
-comment "Please see Documentation/ide.txt for help/info on IDE drives"
+comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
 
 config BLK_DEV_IDE_SATA
 	bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
@@ -235,8 +235,8 @@ config BLK_DEV_IDETAPE
 	  along with other IDE devices, as "hdb" or "hdc", or something
 	  similar, and will be mapped to a character device such as "ht0"
 	  (check the boot messages with dmesg).  Be sure to consult the
-	  <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
-	  for usage information.
+	  <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
+	  files for usage information.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-tape.
@@ -358,7 +358,7 @@ config BLK_DEV_CMD640
 
 	  The CMD640 chip is also used on add-in cards by Acculogic, and on
 	  the "CSA-6400E PCI to IDE controller" that some people have. For
-	  details, read <file:Documentation/ide.txt>.
+	  details, read <file:Documentation/ide/ide.txt>.
 
 config BLK_DEV_CMD640_ENHANCED
 	bool "CMD640 enhanced support"
@@ -366,7 +366,7 @@ config BLK_DEV_CMD640_ENHANCED
 	help
 	  This option includes support for setting/autotuning PIO modes and
 	  prefetch on CMD640 IDE interfaces.  For details, read
-	  <file:Documentation/ide.txt>. If you have a CMD640 IDE interface
+	  <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
 	  and your BIOS does not already do this for you, then say Y here.
 	  Otherwise say N.
 
@@ -1069,9 +1069,9 @@ config BLK_DEV_ALI14XX
 	  This driver is enabled at runtime using the "ali14xx.probe" kernel
 	  boot parameter.  It enables support for the secondary IDE interface
 	  of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
-	  I/O speeds to be set as well.  See the files
-	  <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c>
-	  for more info.
+	  I/O speeds to be set as well.
+	  See the files <file:Documentation/ide/ide.txt> and
+	  <file:drivers/ide/legacy/ali14xx.c> for more info.
 
 config BLK_DEV_DTC2278
 	tristate "DTC-2278 support"
@@ -1079,7 +1079,7 @@ config BLK_DEV_DTC2278
 	  This driver is enabled at runtime using the "dtc2278.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the DTC-2278 card, and permits faster I/O speeds to be set as
-	  well. See the <file:Documentation/ide.txt> and
+	  well. See the <file:Documentation/ide/ide.txt> and
 	  <file:drivers/ide/legacy/dtc2278.c> files for more info.
 
 config BLK_DEV_HT6560B
@@ -1088,7 +1088,7 @@ config BLK_DEV_HT6560B
 	  This driver is enabled at runtime using the "ht6560b.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the Holtek card, and permits faster I/O speeds to be set as well.
-	  See the <file:Documentation/ide.txt> and
+	  See the <file:Documentation/ide/ide.txt> and
 	  <file:drivers/ide/legacy/ht6560b.c> files for more info.
 
 config BLK_DEV_QD65XX
@@ -1096,7 +1096,7 @@ config BLK_DEV_QD65XX
 	help
 	  This driver is enabled at runtime using the "qd65xx.probe" kernel
 	  boot parameter.  It permits faster I/O speeds to be set.  See the
-	  <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+	  <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
 	  for more info.
 
 config BLK_DEV_UMC8672
@@ -1105,7 +1105,7 @@ config BLK_DEV_UMC8672
 	  This driver is enabled at runtime using the "umc8672.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the UMC-8672, and permits faster I/O speeds to be set as well.
-	  See the files <file:Documentation/ide.txt> and
+	  See the files <file:Documentation/ide/ide.txt> and
 	  <file:drivers/ide/legacy/umc8672.c> for more info.
 
 endif
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index c2b79122409..9976f9d627d 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1180,7 +1180,7 @@ static int __initdata is_chipset_set[MAX_HWIFS];
  * ide_setup() gets called VERY EARLY during initialization,
  * to handle kernel "command line" strings beginning with "hdx=" or "ide".
  *
- * Remember to update Documentation/ide.txt if you change something here.
+ * Remember to update Documentation/ide/ide.txt if you change something here.
  */
 static int __init ide_setup(char *s)
 {