Merge ../linus

Conflicts:

	drivers/cpufreq/cpufreq.c

1 files changed, 123 insertions, 186 deletions

diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index abbe48e646c..9ae842329bf 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -25,25 +25,25 @@
 #define SBP2_DEVICE_NAME		"sbp2"
 
 /*
- * SBP2 specific structures and defines
+ * SBP-2 specific definitions
  */
 
-#define ORB_DIRECTION_WRITE_TO_MEDIA    0x0
-#define ORB_DIRECTION_READ_FROM_MEDIA   0x1
-#define ORB_DIRECTION_NO_DATA_TRANSFER  0x2
-
-#define ORB_SET_NULL_PTR(value)			((value & 0x1) << 31)
-#define ORB_SET_NOTIFY(value)			((value & 0x1) << 31)
-#define ORB_SET_RQ_FMT(value)			((value & 0x3) << 29)	/* unused ? */
-#define ORB_SET_NODE_ID(value)			((value & 0xffff) << 16)
-#define ORB_SET_STATUS_FIFO_HI(value, id)	(value >> 32 | ORB_SET_NODE_ID(id))
-#define ORB_SET_STATUS_FIFO_LO(value)		(value & 0xffffffff)
-#define ORB_SET_DATA_SIZE(value)		(value & 0xffff)
-#define ORB_SET_PAGE_SIZE(value)		((value & 0x7) << 16)
-#define ORB_SET_PAGE_TABLE_PRESENT(value)	((value & 0x1) << 19)
-#define ORB_SET_MAX_PAYLOAD(value)		((value & 0xf) << 20)
-#define ORB_SET_SPEED(value)			((value & 0x7) << 24)
-#define ORB_SET_DIRECTION(value)		((value & 0x1) << 27)
+#define ORB_DIRECTION_WRITE_TO_MEDIA	0x0
+#define ORB_DIRECTION_READ_FROM_MEDIA	0x1
+#define ORB_DIRECTION_NO_DATA_TRANSFER	0x2
+
+#define ORB_SET_NULL_PTR(v)		(((v) & 0x1) << 31)
+#define ORB_SET_NOTIFY(v)		(((v) & 0x1) << 31)
+#define ORB_SET_RQ_FMT(v)		(((v) & 0x3) << 29)
+#define ORB_SET_NODE_ID(v)		(((v) & 0xffff) << 16)
+#define ORB_SET_STATUS_FIFO_HI(v, id)	((v) >> 32 | ORB_SET_NODE_ID(id))
+#define ORB_SET_STATUS_FIFO_LO(v)	((v) & 0xffffffff)
+#define ORB_SET_DATA_SIZE(v)		((v) & 0xffff)
+#define ORB_SET_PAGE_SIZE(v)		(((v) & 0x7) << 16)
+#define ORB_SET_PAGE_TABLE_PRESENT(v)	(((v) & 0x1) << 19)
+#define ORB_SET_MAX_PAYLOAD(v)		(((v) & 0xf) << 20)
+#define ORB_SET_SPEED(v)		(((v) & 0x7) << 24)
+#define ORB_SET_DIRECTION(v)		(((v) & 0x1) << 27)
 
 struct sbp2_command_orb {
 	u32 next_ORB_hi;
@@ -64,12 +64,12 @@ struct sbp2_command_orb {
 #define SBP2_LOGICAL_UNIT_RESET		0xe
 #define SBP2_TARGET_RESET_REQUEST	0xf
 
-#define ORB_SET_LUN(value)                      (value & 0xffff)
-#define ORB_SET_FUNCTION(value)                 ((value & 0xf) << 16)
-#define ORB_SET_RECONNECT(value)                ((value & 0xf) << 20)
-#define ORB_SET_EXCLUSIVE(value)                ((value & 0x1) << 28)
-#define ORB_SET_LOGIN_RESP_LENGTH(value)        (value & 0xffff)
-#define ORB_SET_PASSWD_LENGTH(value)            ((value & 0xffff) << 16)
+#define ORB_SET_LUN(v)			((v) & 0xffff)
+#define ORB_SET_FUNCTION(v)		(((v) & 0xf) << 16)
+#define ORB_SET_RECONNECT(v)		(((v) & 0xf) << 20)
+#define ORB_SET_EXCLUSIVE(v)		(((v) & 0x1) << 28)
+#define ORB_SET_LOGIN_RESP_LENGTH(v)	((v) & 0xffff)
+#define ORB_SET_PASSWD_LENGTH(v)	(((v) & 0xffff) << 16)
 
 struct sbp2_login_orb {
 	u32 password_hi;
@@ -82,9 +82,9 @@ struct sbp2_login_orb {
 	u32 status_fifo_lo;
 } __attribute__((packed));
 
-#define RESPONSE_GET_LOGIN_ID(value)            (value & 0xffff)
-#define RESPONSE_GET_LENGTH(value)              ((value >> 16) & 0xffff)
-#define RESPONSE_GET_RECONNECT_HOLD(value)      (value & 0xffff)
+#define RESPONSE_GET_LOGIN_ID(v)	((v) & 0xffff)
+#define RESPONSE_GET_LENGTH(v)		(((v) >> 16) & 0xffff)
+#define RESPONSE_GET_RECONNECT_HOLD(v)	((v) & 0xffff)
 
 struct sbp2_login_response {
 	u32 length_login_ID;
@@ -93,9 +93,8 @@ struct sbp2_login_response {
 	u32 reconnect_hold;
 } __attribute__((packed));
 
-#define ORB_SET_LOGIN_ID(value)                 (value & 0xffff)
-
-#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff)
+#define ORB_SET_LOGIN_ID(v)                 ((v) & 0xffff)
+#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff)
 
 struct sbp2_query_logins_orb {
 	u32 reserved1;
@@ -108,8 +107,8 @@ struct sbp2_query_logins_orb {
 	u32 status_fifo_lo;
 } __attribute__((packed));
 
-#define RESPONSE_GET_MAX_LOGINS(value)          (value & 0xffff)
-#define RESPONSE_GET_ACTIVE_LOGINS(value)       ((RESPONSE_GET_LENGTH(value) - 4) / 12)
+#define RESPONSE_GET_MAX_LOGINS(v)	((v) & 0xffff)
+#define RESPONSE_GET_ACTIVE_LOGINS(v)	((RESPONSE_GET_LENGTH((v)) - 4) / 12)
 
 struct sbp2_query_logins_response {
 	u32 length_max_logins;
@@ -140,8 +139,8 @@ struct sbp2_logout_orb {
 	u32 status_fifo_lo;
 } __attribute__((packed));
 
-#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value)   (value & 0xffff)
-#define PAGE_TABLE_SET_SEGMENT_LENGTH(value)    ((value & 0xffff) << 16)
+#define PAGE_TABLE_SET_SEGMENT_BASE_HI(v)	((v) & 0xffff)
+#define PAGE_TABLE_SET_SEGMENT_LENGTH(v)	(((v) & 0xffff) << 16)
 
 struct sbp2_unrestricted_page_table {
 	u32 length_segment_base_hi;
@@ -171,23 +170,14 @@ struct sbp2_unrestricted_page_table {
 #define SFMT_DEFERRED_ERROR			0x1
 #define SFMT_VENDOR_DEPENDENT_STATUS		0x3
 
-#define SBP2_SCSI_STATUS_GOOD			0x0
-#define SBP2_SCSI_STATUS_CHECK_CONDITION	0x2
-#define SBP2_SCSI_STATUS_CONDITION_MET		0x4
-#define SBP2_SCSI_STATUS_BUSY			0x8
-#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT	0x18
-#define SBP2_SCSI_STATUS_COMMAND_TERMINATED	0x22
-
-#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT	0xff
-
-#define STATUS_GET_SRC(value)			(((value) >> 30) & 0x3)
-#define STATUS_GET_RESP(value)			(((value) >> 28) & 0x3)
-#define STATUS_GET_LEN(value)			(((value) >> 24) & 0x7)
-#define STATUS_GET_SBP_STATUS(value)		(((value) >> 16) & 0xff)
-#define STATUS_GET_ORB_OFFSET_HI(value)		((value) & 0x0000ffff)
-#define STATUS_TEST_DEAD(value)			((value) & 0x08000000)
+#define STATUS_GET_SRC(v)			(((v) >> 30) & 0x3)
+#define STATUS_GET_RESP(v)			(((v) >> 28) & 0x3)
+#define STATUS_GET_LEN(v)			(((v) >> 24) & 0x7)
+#define STATUS_GET_SBP_STATUS(v)		(((v) >> 16) & 0xff)
+#define STATUS_GET_ORB_OFFSET_HI(v)		((v) & 0x0000ffff)
+#define STATUS_TEST_DEAD(v)			((v) & 0x08000000)
 /* test 'resp' | 'dead' | 'sbp2_status' */
-#define STATUS_TEST_RDS(value)			((value) & 0x38ff0000)
+#define STATUS_TEST_RDS(v)			((v) & 0x38ff0000)
 
 struct sbp2_status_block {
 	u32 ORB_offset_hi_misc;
@@ -195,66 +185,70 @@ struct sbp2_status_block {
 	u8 command_set_dependent[24];
 } __attribute__((packed));
 
+
 /*
- * Miscellaneous SBP2 related config rom defines
+ * SBP2 related configuration ROM definitions
  */
 
-#define SBP2_UNIT_DIRECTORY_OFFSET_KEY				0xd1
-#define SBP2_CSR_OFFSET_KEY					0x54
-#define SBP2_UNIT_SPEC_ID_KEY					0x12
-#define SBP2_UNIT_SW_VERSION_KEY				0x13
-#define SBP2_COMMAND_SET_SPEC_ID_KEY				0x38
-#define SBP2_COMMAND_SET_KEY					0x39
-#define SBP2_UNIT_CHARACTERISTICS_KEY				0x3a
-#define SBP2_DEVICE_TYPE_AND_LUN_KEY				0x14
-#define SBP2_FIRMWARE_REVISION_KEY				0x3c
+#define SBP2_UNIT_DIRECTORY_OFFSET_KEY		0xd1
+#define SBP2_CSR_OFFSET_KEY			0x54
+#define SBP2_UNIT_SPEC_ID_KEY			0x12
+#define SBP2_UNIT_SW_VERSION_KEY		0x13
+#define SBP2_COMMAND_SET_SPEC_ID_KEY		0x38
+#define SBP2_COMMAND_SET_KEY			0x39
+#define SBP2_UNIT_CHARACTERISTICS_KEY		0x3a
+#define SBP2_DEVICE_TYPE_AND_LUN_KEY		0x14
+#define SBP2_FIRMWARE_REVISION_KEY		0x3c
 
-#define SBP2_AGENT_STATE_OFFSET					0x00ULL
-#define SBP2_AGENT_RESET_OFFSET					0x04ULL
-#define SBP2_ORB_POINTER_OFFSET					0x08ULL
-#define SBP2_DOORBELL_OFFSET					0x10ULL
-#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET			0x14ULL
-#define SBP2_UNSOLICITED_STATUS_VALUE				0xf
+#define SBP2_AGENT_STATE_OFFSET			0x00ULL
+#define SBP2_AGENT_RESET_OFFSET			0x04ULL
+#define SBP2_ORB_POINTER_OFFSET			0x08ULL
+#define SBP2_DOORBELL_OFFSET			0x10ULL
+#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET	0x14ULL
+#define SBP2_UNSOLICITED_STATUS_VALUE		0xf
 
-#define SBP2_BUSY_TIMEOUT_ADDRESS				0xfffff0000210ULL
-#define SBP2_BUSY_TIMEOUT_VALUE					0xf
+#define SBP2_BUSY_TIMEOUT_ADDRESS		0xfffff0000210ULL
+/* biggest possible value for Single Phase Retry count is 0xf */
+#define SBP2_BUSY_TIMEOUT_VALUE			0xf
 
-#define SBP2_AGENT_RESET_DATA					0xf
+#define SBP2_AGENT_RESET_DATA			0xf
 
-/*
- * Unit spec id and sw version entry for SBP-2 devices
- */
+#define SBP2_UNIT_SPEC_ID_ENTRY			0x0000609e
+#define SBP2_SW_VERSION_ENTRY			0x00010483
 
-#define SBP2_UNIT_SPEC_ID_ENTRY					0x0000609e
-#define SBP2_SW_VERSION_ENTRY					0x00010483
 
 /*
- * SCSI specific stuff
+ * SCSI specific definitions
  */
 
-#define SBP2_MAX_SG_ELEMENT_LENGTH	0xf000
-#define SBP2_MAX_SECTORS		255	/* Max sectors supported */
-#define SBP2_MAX_CMDS			8	/* This should be safe */
+#define SBP2_MAX_SG_ELEMENT_LENGTH		0xf000
+#define SBP2_MAX_SECTORS			255
+/* There is no real limitation of the queue depth (i.e. length of the linked
+ * list of command ORBs) at the target. The chosen depth is merely an
+ * implementation detail of the sbp2 driver. */
+#define SBP2_MAX_CMDS				8
+
+#define SBP2_SCSI_STATUS_GOOD			0x0
+#define SBP2_SCSI_STATUS_CHECK_CONDITION	0x2
+#define SBP2_SCSI_STATUS_CONDITION_MET		0x4
+#define SBP2_SCSI_STATUS_BUSY			0x8
+#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT	0x18
+#define SBP2_SCSI_STATUS_COMMAND_TERMINATED	0x22
+#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT	0xff
 
-/* Flags for detected oddities and brokeness */
-#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1
-#define SBP2_WORKAROUND_INQUIRY_36	0x2
-#define SBP2_WORKAROUND_MODE_SENSE_8	0x4
-#define SBP2_WORKAROUND_FIX_CAPACITY	0x8
-#define SBP2_WORKAROUND_OVERRIDE	0x100
 
-/* This is the two dma types we use for cmd_dma below */
-enum cmd_dma_types {
+/*
+ * Representations of commands and devices
+ */
+
+enum sbp2_dma_types {
 	CMD_DMA_NONE,
 	CMD_DMA_PAGE,
 	CMD_DMA_SINGLE
 };
 
-/*
- * Encapsulates all the info necessary for an outstanding command.
- */
+/* Per SCSI command */
 struct sbp2_command_info {
-
 	struct list_head list;
 	struct sbp2_command_orb command_orb ____cacheline_aligned;
 	dma_addr_t command_orb_dma ____cacheline_aligned;
@@ -262,25 +256,25 @@ struct sbp2_command_info {
 	void (*Current_done)(struct scsi_cmnd *);
 
 	/* Also need s/g structure for each sbp2 command */
-	struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned;
+	struct sbp2_unrestricted_page_table
+			scatter_gather_element[SG_ALL] ____cacheline_aligned;
 	dma_addr_t sge_dma ____cacheline_aligned;
 	void *sge_buffer;
 	dma_addr_t cmd_dma;
-	enum cmd_dma_types dma_type;
+	enum sbp2_dma_types dma_type;
 	unsigned long dma_size;
-	int dma_dir;
-
+	enum dma_data_direction dma_dir;
 };
 
-struct sbp2scsi_host_info;
+/* Per FireWire host */
+struct sbp2_fwhost_info {
+	struct hpsb_host *host;
+	struct list_head logical_units;
+};
 
-/*
- * Information needed on a per scsi id basis (one for each sbp2 device)
- */
-struct scsi_id_instance_data {
-	/*
-	 * Various sbp2 specific structures
-	 */
+/* Per logical unit */
+struct sbp2_lu {
+	/* Operation request blocks */
 	struct sbp2_command_orb *last_orb;
 	dma_addr_t last_orb_dma;
 	struct sbp2_login_orb *login_orb;
@@ -297,116 +291,59 @@ struct scsi_id_instance_data {
 	dma_addr_t logout_orb_dma;
 	struct sbp2_status_block status_block;
 
-	/*
-	 * Stuff we need to know about the sbp2 device itself
-	 */
-	u64 sbp2_management_agent_addr;
-	u64 sbp2_command_block_agent_addr;
+	/* How to talk to the unit */
+	u64 management_agent_addr;
+	u64 command_block_agent_addr;
 	u32 speed_code;
 	u32 max_payload_size;
+	u16 lun;
 
-	/*
-	 * Values pulled from the device's unit directory
-	 */
-	u32 sbp2_command_set_spec_id;
-	u32 sbp2_command_set;
-	u32 sbp2_unit_characteristics;
-	u32 sbp2_lun;
-	u32 sbp2_firmware_revision;
-
-	/*
-	 * Address for the device to write status blocks to
-	 */
+	/* Address for the unit to write status blocks to */
 	u64 status_fifo_addr;
 
-	/*
-	 * Waitqueue flag for logins, reconnects, logouts, query logins
-	 */
-	int access_complete:1;
+	/* Waitqueue flag for logins, reconnects, logouts, query logins */
+	unsigned int access_complete:1;
 
-	/*
-	 * Pool of command orbs, so we can have more than overlapped command per id
-	 */
-	spinlock_t sbp2_command_orb_lock;
-	struct list_head sbp2_command_orb_inuse;
-	struct list_head sbp2_command_orb_completed;
+	/* Pool of command ORBs for this logical unit */
+	spinlock_t cmd_orb_lock;
+	struct list_head cmd_orb_inuse;
+	struct list_head cmd_orb_completed;
 
-	struct list_head scsi_list;
+	/* Backlink to FireWire host; list of units attached to the host */
+	struct sbp2_fwhost_info *hi;
+	struct list_head lu_list;
 
-	/* Node entry, as retrieved from NodeMgr entries */
+	/* IEEE 1394 core's device representations */
 	struct node_entry *ne;
 	struct unit_directory *ud;
 
-	/* A backlink to our host_info */
-	struct sbp2scsi_host_info *hi;
-
-	/* SCSI related pointers */
+	/* SCSI core's device representations */
 	struct scsi_device *sdev;
-	struct Scsi_Host *scsi_host;
+	struct Scsi_Host *shost;
 
 	/* Device specific workarounds/brokeness */
 	unsigned workarounds;
 
+	/* Connection state */
 	atomic_t state;
+
+	/* For deferred requests to the fetch agent */
 	struct work_struct protocol_work;
 };
 
-/* For use in scsi_id_instance_data.state */
+/* For use in sbp2_lu.state */
 enum sbp2lu_state_types {
 	SBP2LU_STATE_RUNNING,		/* all normal */
 	SBP2LU_STATE_IN_RESET,		/* between bus reset and reconnect */
 	SBP2LU_STATE_IN_SHUTDOWN	/* when sbp2_remove was called */
 };
 
-/* Sbp2 host data structure (one per IEEE1394 host) */
-struct sbp2scsi_host_info {
-	struct hpsb_host *host;		/* IEEE1394 host */
-	struct list_head scsi_ids;	/* List of scsi ids on this host */
-};
-
-/*
- * Function prototypes
- */
-
-/*
- * Various utility prototypes
- */
-static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id);
-static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id);
-static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb);
-static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt);
-static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id,
-							  struct scsi_cmnd *Current_SCpnt,
-							  void (*Current_done)(struct scsi_cmnd *));
-static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id,
-		struct sbp2_command_info *command);
-
-
-static int sbp2_start_device(struct scsi_id_instance_data *scsi_id);
-static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id);
-
-#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
-static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data,
-                                     u64 addr, size_t length, u16 flags);
-static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data,
-                                    u64 addr, size_t length, u16 flags);
-#endif
-
-/*
- * SBP-2 protocol related prototypes
- */
-static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id);
-static int sbp2_login_device(struct scsi_id_instance_data *scsi_id);
-static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id);
-static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id);
-static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
-				    quadlet_t *data, u64 addr, size_t length, u16 flags);
-static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait);
-static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,
-					      unchar *sense_data);
-static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
-				      struct unit_directory *ud);
-static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);
-static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id);
+/* For use in sbp2_lu.workarounds and in the corresponding
+ * module load parameter */
+#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1
+#define SBP2_WORKAROUND_INQUIRY_36	0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8	0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY	0x8
+#define SBP2_WORKAROUND_OVERRIDE	0x100
 
 #endif /* SBP2_H */