sbp2, ohci1394 cleanups:

sbp2: various code formatting cleanups
ohci1394: remove form feed characters

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>

3 files changed, 224 insertions, 229 deletions

diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 4cf9b8f3e33..dcb5776e5c4 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -3201,8 +3201,6 @@ static struct hpsb_host_driver ohci1394_driver = {
 	.hw_csr_reg =		ohci_hw_csr_reg,
 };
 
-
-
 /***********************************
  * PCI Driver Interface functions  *
  ***********************************/
@@ -3606,8 +3604,6 @@ static struct pci_driver ohci1394_pci_driver = {
 	.suspend =	ohci1394_pci_suspend,
 };
 
-
-
 /***********************************
  * OHCI1394 Video Interface        *
  ***********************************/
@@ -3714,7 +3710,6 @@ EXPORT_SYMBOL(ohci1394_init_iso_tasklet);
 EXPORT_SYMBOL(ohci1394_register_iso_tasklet);
 EXPORT_SYMBOL(ohci1394_unregister_iso_tasklet);
 
-
 /***********************************
  * General module initialization   *
  ***********************************/
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 747dbd1c3c9..073ede9d3b4 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -151,18 +151,15 @@ static int force_inquiry_hack;
 module_param(force_inquiry_hack, int, 0444);
 MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
 
-
 /*
  * Export information about protocols/devices supported by this driver.
  */
 static struct ieee1394_device_id sbp2_id_table[] = {
 	{
-		.match_flags =IEEE1394_MATCH_SPECIFIER_ID |
-		              IEEE1394_MATCH_VERSION,
-		.specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff,
-		.version =    SBP2_SW_VERSION_ENTRY & 0xffffff
-	},
-	{ }
+	 .match_flags = IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION,
+	 .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff,
+	 .version = SBP2_SW_VERSION_ENTRY & 0xffffff},
+	{}
 };
 
 MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table);
@@ -221,7 +218,6 @@ static u32 global_outstanding_dmas = 0;
 
 #define SBP2_ERR(fmt, args...)		HPSB_ERR("sbp2: "fmt, ## args)
 
-
 /*
  * Globals
  */
@@ -254,8 +250,8 @@ static struct hpsb_address_ops sbp2_ops = {
 
 #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
 static struct hpsb_address_ops sbp2_physdma_ops = {
-        .read = sbp2_handle_physdma_read,
-        .write = sbp2_handle_physdma_write,
+	.read = sbp2_handle_physdma_read,
+	.write = sbp2_handle_physdma_write,
 };
 #endif
 
@@ -287,7 +283,6 @@ static u32 sbp2_broken_inquiry_list[] = {
  * General utility functions
  **************************************/
 
-
 #ifndef __BIG_ENDIAN
 /*
  * Converts a buffer from be32 to cpu byte ordering. Length is in bytes.
@@ -324,7 +319,8 @@ static __inline__ void sbp2util_cpu_to_be32_buffer(void *buffer, int length)
 /*
  * Debug packet dump routine. Length is in bytes.
  */
-static void sbp2util_packet_dump(void *buffer, int length, char *dump_name, u32 dump_phys_addr)
+static void sbp2util_packet_dump(void *buffer, int length, char *dump_name,
+				 u32 dump_phys_addr)
 {
 	int i;
 	unsigned char *dump = buffer;
@@ -345,7 +341,7 @@ static void sbp2util_packet_dump(void *buffer, int length, char *dump_name, u32
 			printk("  ");
 		if ((i & 0xf) == 0)
 			printk("\n   ");
-		printk("%02x ", (int) dump[i]);
+		printk("%02x ", (int)dump[i]);
 	}
 	printk("\n");
 
@@ -364,9 +360,9 @@ static int sbp2util_down_timeout(atomic_t *done, int timeout)
 
 	for (i = timeout; (i > 0 && atomic_read(done) == 0); i-= HZ/10) {
 		if (msleep_interruptible(100))	/* 100ms */
-			return(1);
+			return 1;
 	}
-	return ((i > 0) ? 0:1);
+	return (i > 0) ? 0 : 1;
 }
 
 /* Free's an allocated packet */
@@ -380,21 +376,22 @@ static void sbp2_free_packet(struct hpsb_packet *packet)
  * subaction and returns immediately. Can be used from interrupts.
  */
 static int sbp2util_node_write_no_wait(struct node_entry *ne, u64 addr,
-				quadlet_t *buffer, size_t length)
+				       quadlet_t *buffer, size_t length)
 {
 	struct hpsb_packet *packet;
 
 	packet = hpsb_make_writepacket(ne->host, ne->nodeid,
 				       addr, buffer, length);
-        if (!packet)
-                return -ENOMEM;
+	if (!packet)
+		return -ENOMEM;
 
-	hpsb_set_packet_complete_task(packet, (void (*)(void*))sbp2_free_packet,
+	hpsb_set_packet_complete_task(packet,
+				      (void (*)(void *))sbp2_free_packet,
 				      packet);
 
 	hpsb_node_fill_packet(ne, packet);
 
-        if (hpsb_send_packet(packet) < 0) {
+	if (hpsb_send_packet(packet) < 0) {
 		sbp2_free_packet(packet);
 		return -EIO;
 	}
@@ -420,19 +417,21 @@ static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_i
 		command = (struct sbp2_command_info *)
 		    kmalloc(sizeof(struct sbp2_command_info), GFP_ATOMIC);
 		if (!command) {
-			spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
-			return(-ENOMEM);
+			spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock,
+					       flags);
+			return -ENOMEM;
 		}
 		memset(command, '\0', sizeof(struct sbp2_command_info));
 		command->command_orb_dma =
-			pci_map_single (hi->host->pdev, &command->command_orb,
-					sizeof(struct sbp2_command_orb),
-					PCI_DMA_BIDIRECTIONAL);
+		    pci_map_single(hi->host->pdev, &command->command_orb,
+				   sizeof(struct sbp2_command_orb),
+				   PCI_DMA_BIDIRECTIONAL);
 		SBP2_DMA_ALLOC("single command orb DMA");
 		command->sge_dma =
-			pci_map_single (hi->host->pdev, &command->scatter_gather_element,
-					sizeof(command->scatter_gather_element),
-					PCI_DMA_BIDIRECTIONAL);
+		    pci_map_single(hi->host->pdev,
+				   &command->scatter_gather_element,
+				   sizeof(command->scatter_gather_element),
+				   PCI_DMA_BIDIRECTIONAL);
 		SBP2_DMA_ALLOC("scatter_gather_element");
 		INIT_LIST_HEAD(&command->list);
 		list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed);
@@ -488,7 +487,7 @@ static struct sbp2_command_info *sbp2util_find_command_for_orb(
 		list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) {
 			if (command->command_orb_dma == orb) {
 				spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
-				return (command);
+				return command;
 			}
 		}
 	}
@@ -496,7 +495,7 @@ static struct sbp2_command_info *sbp2util_find_command_for_orb(
 
 	SBP2_ORB_DEBUG("could not match command orb %x", (unsigned int)orb);
 
-	return(NULL);
+	return NULL;
 }
 
 /*
@@ -513,12 +512,12 @@ static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_
 		list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) {
 			if (command->Current_SCpnt == SCpnt) {
 				spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
-				return (command);
+				return command;
 			}
 		}
 	}
 	spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
-	return(NULL);
+	return NULL;
 }
 
 /*
@@ -545,7 +544,7 @@ static struct sbp2_command_info *sbp2util_allocate_command_orb(
 		SBP2_ERR("sbp2util_allocate_command_orb - No orbs available!");
 	}
 	spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
-	return (command);
+	return command;
 }
 
 /* Free our DMA's */
@@ -587,7 +586,8 @@ static void sbp2util_free_command_dma(struct sbp2_command_info *command)
 /*
  * This function moves a command to the completed orb list.
  */
-static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id, struct sbp2_command_info *command)
+static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id,
+					    struct sbp2_command_info *command)
 {
 	unsigned long flags;
 
@@ -606,8 +606,6 @@ static inline int sbp2util_node_is_available(struct scsi_id_instance_data *scsi_
 	return scsi_id && scsi_id->ne && !scsi_id->ne->in_limbo;
 }
 
-
-
 /*********************************************
  * IEEE-1394 core driver stack related section
  *********************************************/
@@ -627,14 +625,14 @@ static int sbp2_probe(struct device *dev)
 	if (ud->flags & UNIT_DIRECTORY_HAS_LUN_DIRECTORY)
 		return -ENODEV;
 
-        scsi_id = sbp2_alloc_device(ud);
+	scsi_id = sbp2_alloc_device(ud);
 
-        if (!scsi_id)
-                return -ENOMEM;
+	if (!scsi_id)
+		return -ENOMEM;
 
-        sbp2_parse_unit_directory(scsi_id, ud);
+	sbp2_parse_unit_directory(scsi_id, ud);
 
-        return sbp2_start_device(scsi_id);
+	return sbp2_start_device(scsi_id);
 }
 
 static int sbp2_remove(struct device *dev)
@@ -769,7 +767,7 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 
 	/* Register our host with the SCSI stack. */
 	scsi_host = scsi_host_alloc(&scsi_driver_template,
-				    sizeof (unsigned long));
+				    sizeof(unsigned long));
 	if (!scsi_host) {
 		SBP2_ERR("failed to register scsi host");
 		goto failed_alloc;
@@ -790,7 +788,6 @@ failed_alloc:
 	return NULL;
 }
 
-
 static void sbp2_host_reset(struct hpsb_host *host)
 {
 	struct sbp2scsi_host_info *hi;
@@ -804,7 +801,6 @@ static void sbp2_host_reset(struct hpsb_host *host)
 	}
 }
 
-
 /*
  * This function is where we first pull the node unique ids, and then
  * allocate memory and register a SBP-2 device.
@@ -818,7 +814,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
 
 	/* Login FIFO DMA */
 	scsi_id->login_response =
-		pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_login_response),
+		pci_alloc_consistent(hi->host->pdev,
+				     sizeof(struct sbp2_login_response),
 				     &scsi_id->login_response_dma);
 	if (!scsi_id->login_response)
 		goto alloc_fail;
@@ -826,7 +823,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
 
 	/* Query logins ORB DMA */
 	scsi_id->query_logins_orb =
-		pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_query_logins_orb),
+		pci_alloc_consistent(hi->host->pdev,
+				     sizeof(struct sbp2_query_logins_orb),
 				     &scsi_id->query_logins_orb_dma);
 	if (!scsi_id->query_logins_orb)
 		goto alloc_fail;
@@ -834,7 +832,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
 
 	/* Query logins response DMA */
 	scsi_id->query_logins_response =
-		pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_query_logins_response),
+		pci_alloc_consistent(hi->host->pdev,
+				     sizeof(struct sbp2_query_logins_response),
 				     &scsi_id->query_logins_response_dma);
 	if (!scsi_id->query_logins_response)
 		goto alloc_fail;
@@ -842,7 +841,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
 
 	/* Reconnect ORB DMA */
 	scsi_id->reconnect_orb =
-		pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_reconnect_orb),
+		pci_alloc_consistent(hi->host->pdev,
+				     sizeof(struct sbp2_reconnect_orb),
 				     &scsi_id->reconnect_orb_dma);
 	if (!scsi_id->reconnect_orb)
 		goto alloc_fail;
@@ -850,7 +850,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
 
 	/* Logout ORB DMA */
 	scsi_id->logout_orb =
-		pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_logout_orb),
+		pci_alloc_consistent(hi->host->pdev,
+				     sizeof(struct sbp2_logout_orb),
 				     &scsi_id->logout_orb_dma);
 	if (!scsi_id->logout_orb)
 		goto alloc_fail;
@@ -858,7 +859,8 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
 
 	/* Login ORB DMA */
 	scsi_id->login_orb =
-		pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_login_orb),
+		pci_alloc_consistent(hi->host->pdev,
+				     sizeof(struct sbp2_login_orb),
 				     &scsi_id->login_orb_dma);
 	if (!scsi_id->login_orb) {
 alloc_fail:
@@ -880,25 +882,25 @@ alloc_fail:
 
 		if (scsi_id->logout_orb) {
 			pci_free_consistent(hi->host->pdev,
-					sizeof(struct sbp2_logout_orb),
-					scsi_id->logout_orb,
-					scsi_id->logout_orb_dma);
+					    sizeof(struct sbp2_logout_orb),
+					    scsi_id->logout_orb,
+					    scsi_id->logout_orb_dma);
 			SBP2_DMA_FREE("logout ORB DMA");
 		}
 
 		if (scsi_id->reconnect_orb) {
 			pci_free_consistent(hi->host->pdev,
-					sizeof(struct sbp2_reconnect_orb),
-					scsi_id->reconnect_orb,
-					scsi_id->reconnect_orb_dma);
+					    sizeof(struct sbp2_reconnect_orb),
+					    scsi_id->reconnect_orb,
+					    scsi_id->reconnect_orb_dma);
 			SBP2_DMA_FREE("reconnect ORB DMA");
 		}
 
 		if (scsi_id->login_response) {
 			pci_free_consistent(hi->host->pdev,
-					sizeof(struct sbp2_login_response),
-					scsi_id->login_response,
-					scsi_id->login_response_dma);
+					    sizeof(struct sbp2_login_response),
+					    scsi_id->login_response,
+					    scsi_id->login_response_dma);
 			SBP2_DMA_FREE("login FIFO DMA");
 		}
 
@@ -906,7 +908,7 @@ alloc_fail:
 
 		kfree(scsi_id);
 
-		SBP2_ERR ("Could not allocate memory for scsi_id");
+		SBP2_ERR("Could not allocate memory for scsi_id");
 
 		return -ENOMEM;
 	}
@@ -935,7 +937,7 @@ alloc_fail:
 		sbp2_remove_device(scsi_id);
 		return -EINTR;
 	}
-	
+
 	/*
 	 * Login to the sbp-2 device
 	 */
@@ -1054,36 +1056,39 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
  * This function deals with physical dma write requests (for adapters that do not support
  * physical dma in hardware). Mostly just here for debugging...
  */
-static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data,
-                                     u64 addr, size_t length, u16 flags)
+static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid,
+				     int destid, quadlet_t *data, u64 addr,
+				     size_t length, u16 flags)
 {
 
-        /*
-         * Manually put the data in the right place.
-         */
-        memcpy(bus_to_virt((u32)addr), data, length);
-	sbp2util_packet_dump(data, length, "sbp2 phys dma write by device", (u32)addr);
-        return(RCODE_COMPLETE);
+	/*
+	 * Manually put the data in the right place.
+	 */
+	memcpy(bus_to_virt((u32) addr), data, length);
+	sbp2util_packet_dump(data, length, "sbp2 phys dma write by device",
+			     (u32) addr);
+	return RCODE_COMPLETE;
 }
 
 /*
  * This function deals with physical dma read requests (for adapters that do not support
  * physical dma in hardware). Mostly just here for debugging...
  */
-static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data,
-                                    u64 addr, size_t length, u16 flags)
+static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid,
+				    quadlet_t *data, u64 addr, size_t length,
+				    u16 flags)
 {
 
-        /*
-         * Grab data from memory and send a read response.
-         */
-        memcpy(data, bus_to_virt((u32)addr), length);
-	sbp2util_packet_dump(data, length, "sbp2 phys dma read by device", (u32)addr);
-        return(RCODE_COMPLETE);
+	/*
+	 * Grab data from memory and send a read response.
+	 */
+	memcpy(data, bus_to_virt((u32) addr), length);
+	sbp2util_packet_dump(data, length, "sbp2 phys dma read by device",
+			     (u32) addr);
+	return RCODE_COMPLETE;
 }
 #endif
 
-
 /**************************************
  * SBP-2 protocol related section
  **************************************/
@@ -1147,12 +1152,12 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
 
 	if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 2*HZ)) {
 		SBP2_INFO("Error querying logins to SBP-2 device - timed out");
-		return(-EIO);
+		return -EIO;
 	}
 
 	if (scsi_id->status_block.ORB_offset_lo != scsi_id->query_logins_orb_dma) {
 		SBP2_INFO("Error querying logins to SBP-2 device - timed out");
-		return(-EIO);
+		return -EIO;
 	}
 
 	if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) ||
@@ -1160,7 +1165,7 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
 	    STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
 
 		SBP2_INFO("Error querying logins to SBP-2 device - timed out");
-		return(-EIO);
+		return -EIO;
 	}
 
 	sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_response, sizeof(struct sbp2_query_logins_response));
@@ -1177,7 +1182,7 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
 	SBP2_DEBUG("Number of active logins: %d", active_logins);
 
 	if (active_logins >= max_logins) {
-		return(-EIO);
+		return -EIO;
 	}
 
 	return 0;
@@ -1196,13 +1201,13 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
 
 	if (!scsi_id->login_orb) {
 		SBP2_DEBUG("sbp2_login_device: login_orb not alloc'd!");
-		return(-EIO);
+		return -EIO;
 	}
 
 	if (!exclusive_login) {
 		if (sbp2_query_logins(scsi_id)) {
 			SBP2_INFO("Device does not support any more concurrent logins");
-			return(-EIO);
+			return -EIO;
 		}
 	}
 
@@ -1269,7 +1274,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
 	 */
 	if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 20*HZ)) {
 		SBP2_ERR("Error logging into SBP-2 device - login timed-out");
-		return(-EIO);
+		return -EIO;
 	}
 
 	/*
@@ -1277,7 +1282,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
 	 */
 	if (scsi_id->status_block.ORB_offset_lo != scsi_id->login_orb_dma) {
 		SBP2_ERR("Error logging into SBP-2 device - login timed-out");
-		return(-EIO);
+		return -EIO;
 	}
 
 	/*
@@ -1288,7 +1293,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
 	    STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
 
 		SBP2_ERR("Error logging into SBP-2 device - login failed");
-		return(-EIO);
+		return -EIO;
 	}
 
 	/*
@@ -1312,7 +1317,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
 
 	SBP2_INFO("Logged into SBP-2 device");
 
-	return(0);
+	return 0;
 
 }
 
@@ -1366,8 +1371,7 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
 	atomic_set(&scsi_id->sbp2_login_complete, 0);
 
 	error = hpsb_node_write(scsi_id->ne,
-	                            scsi_id->sbp2_management_agent_addr,
-	                            data, 8);
+				scsi_id->sbp2_management_agent_addr, data, 8);
 	if (error)
 		return error;
 
@@ -1377,7 +1381,7 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
 
 	SBP2_INFO("Logged out of SBP-2 device");
 
-	return(0);
+	return 0;
 
 }
 
@@ -1437,8 +1441,7 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
 	atomic_set(&scsi_id->sbp2_login_complete, 0);
 
 	error = hpsb_node_write(scsi_id->ne,
-	                            scsi_id->sbp2_management_agent_addr,
-	                            data, 8);
+				scsi_id->sbp2_management_agent_addr, data, 8);
 	if (error)
 		return error;
 
@@ -1447,7 +1450,7 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
 	 */
 	if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, HZ)) {
 		SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out");
-		return(-EIO);
+		return -EIO;
 	}
 
 	/*
@@ -1455,7 +1458,7 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
 	 */
 	if (scsi_id->status_block.ORB_offset_lo != scsi_id->reconnect_orb_dma) {
 		SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out");
-		return(-EIO);
+		return -EIO;
 	}
 
 	/*
@@ -1466,12 +1469,12 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
 	    STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
 
 		SBP2_ERR("Error reconnecting to SBP-2 device - reconnect failed");
-		return(-EIO);
+		return -EIO;
 	}
 
 	HPSB_DEBUG("Reconnected to SBP-2 device");
 
-	return(0);
+	return 0;
 
 }
 
@@ -1494,10 +1497,9 @@ static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id)
 		SBP2_ERR("sbp2_set_busy_timeout error");
 	}
 
-	return(0);
+	return 0;
 }
 
-
 /*
  * This function is called to parse sbp2 device's config rom unit
  * directory. Used to determine things like sbp2 management agent offset,
@@ -1510,7 +1512,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 	struct csr1212_dentry *dentry;
 	u64 management_agent_addr;
 	u32 command_set_spec_id, command_set, unit_characteristics,
-		firmware_revision, workarounds;
+	    firmware_revision, workarounds;
 	int i;
 
 	SBP2_DEBUG("sbp2_parse_unit_directory");
@@ -1528,13 +1530,14 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 			if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET) {
 				/* Save off the management agent address */
 				management_agent_addr =
-					CSR1212_REGISTER_SPACE_BASE +
-					(kv->value.csr_offset << 2);
+				    CSR1212_REGISTER_SPACE_BASE +
+				    (kv->value.csr_offset << 2);
 
 				SBP2_DEBUG("sbp2_management_agent_addr = %x",
-					   (unsigned int) management_agent_addr);
+					   (unsigned int)management_agent_addr);
 			} else if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) {
-				scsi_id->sbp2_lun = ORB_SET_LUN(kv->value.immediate);
+				scsi_id->sbp2_lun =
+				    ORB_SET_LUN(kv->value.immediate);
 			}
 			break;
 
@@ -1542,14 +1545,14 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 			/* Command spec organization */
 			command_set_spec_id = kv->value.immediate;
 			SBP2_DEBUG("sbp2_command_set_spec_id = %x",
-				   (unsigned int) command_set_spec_id);
+				   (unsigned int)command_set_spec_id);
 			break;
 
 		case SBP2_COMMAND_SET_KEY:
 			/* Command set used by sbp2 device */
 			command_set = kv->value.immediate;
 			SBP2_DEBUG("sbp2_command_set = %x",
-				   (unsigned int) command_set);
+				   (unsigned int)command_set);
 			break;
 
 		case SBP2_UNIT_CHARACTERISTICS_KEY:
@@ -1559,7 +1562,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 			 */
 			unit_characteristics = kv->value.immediate;
 			SBP2_DEBUG("sbp2_unit_characteristics = %x",
-				   (unsigned int) unit_characteristics);
+				   (unsigned int)unit_characteristics);
 			break;
 
 		case SBP2_FIRMWARE_REVISION_KEY:
@@ -1567,9 +1570,10 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 			firmware_revision = kv->value.immediate;
 			if (force_inquiry_hack)
 				SBP2_INFO("sbp2_firmware_revision = %x",
-				   (unsigned int) firmware_revision);
-			else	SBP2_DEBUG("sbp2_firmware_revision = %x",
-				   (unsigned int) firmware_revision);
+					  (unsigned int)firmware_revision);
+			else
+				SBP2_DEBUG("sbp2_firmware_revision = %x",
+					   (unsigned int)firmware_revision);
 			break;
 
 		default:
@@ -1647,8 +1651,9 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
 	SBP2_DEBUG("sbp2_max_speed_and_size");
 
 	/* Initial setting comes from the hosts speed map */
-	scsi_id->speed_code = hi->host->speed_map[NODEID_TO_NODE(hi->host->node_id) * 64
-						  + NODEID_TO_NODE(scsi_id->ne->nodeid)];
+	scsi_id->speed_code =
+	    hi->host->speed_map[NODEID_TO_NODE(hi->host->node_id) * 64 +
+				NODEID_TO_NODE(scsi_id->ne->nodeid)];
 
 	/* Bump down our speed if the user requested it */
 	if (scsi_id->speed_code > max_speed) {
@@ -1659,15 +1664,16 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
 
 	/* Payload size is the lesser of what our speed supports and what
 	 * our host supports.  */
-	scsi_id->max_payload_size = min(sbp2_speedto_max_payload[scsi_id->speed_code],
-					(u8)(hi->host->csr.max_rec - 1));
+	scsi_id->max_payload_size =
+	    min(sbp2_speedto_max_payload[scsi_id->speed_code],
+		(u8) (hi->host->csr.max_rec - 1));
 
 	HPSB_DEBUG("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]",
 		   NODE_BUS_ARGS(hi->host, scsi_id->ne->nodeid),
 		   hpsb_speedto_str[scsi_id->speed_code],
-		   1 << ((u32)scsi_id->max_payload_size + 2));
+		   1 << ((u32) scsi_id->max_payload_size + 2));
 
-	return(0);
+	return 0;
 }
 
 /*
@@ -1702,7 +1708,7 @@ static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait)
 	 */
 	scsi_id->last_orb = NULL;
 
-	return(0);
+	return 0;
 }
 
 /*
@@ -1716,10 +1722,9 @@ static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
 				   unsigned int scsi_request_bufflen,
 				   void *scsi_request_buffer,
 				   enum dma_data_direction dma_dir)
-
 {
 	struct sbp2scsi_host_info *hi = scsi_id->hi;
-	struct scatterlist *sgpnt = (struct scatterlist *) scsi_request_buffer;
+	struct scatterlist *sgpnt = (struct scatterlist *)scsi_request_buffer;
 	struct sbp2_command_orb *command_orb = &command->command_orb;
 	struct sbp2_unrestricted_page_table *scatter_gather_element =
 		&command->scatter_gather_element[0];
@@ -1739,30 +1744,30 @@ static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
 	command_orb->next_ORB_lo = 0x0;
 	command_orb->misc = ORB_SET_MAX_PAYLOAD(scsi_id->max_payload_size);
 	command_orb->misc |= ORB_SET_SPEED(scsi_id->speed_code);
-	command_orb->misc |= ORB_SET_NOTIFY(1);		/* Notify us when complete */
+	command_orb->misc |= ORB_SET_NOTIFY(1);	/* Notify us when complete */
 
 	/*
 	 * Get the direction of the transfer. If the direction is unknown, then use our
 	 * goofy table as a back-up.
 	 */
 	switch (dma_dir) {
-		case DMA_NONE:
-			orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
-			break;
-		case DMA_TO_DEVICE:
-			orb_direction = ORB_DIRECTION_WRITE_TO_MEDIA;
-			break;
-		case DMA_FROM_DEVICE:
-			orb_direction = ORB_DIRECTION_READ_FROM_MEDIA;
-			break;
-		case DMA_BIDIRECTIONAL:
-		default:
-			SBP2_ERR("SCSI data transfer direction not specified. "
-				 "Update the SBP2 direction table in sbp2.h if "
-				 "necessary for your application");
-			__scsi_print_command(scsi_cmd);
-			orb_direction = sbp2scsi_direction_table[*scsi_cmd];
-			break;
+	case DMA_NONE:
+		orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
+		break;
+	case DMA_TO_DEVICE:
+		orb_direction = ORB_DIRECTION_WRITE_TO_MEDIA;
+		break;
+	case DMA_FROM_DEVICE:
+		orb_direction = ORB_DIRECTION_READ_FROM_MEDIA;
+		break;
+	case DMA_BIDIRECTIONAL:
+	default:
+		SBP2_ERR("SCSI data transfer direction not specified. "
+			 "Update the SBP2 direction table in sbp2.h if "
+			 "necessary for your application");
+		__scsi_print_command(scsi_cmd);
+		orb_direction = sbp2scsi_direction_table[*scsi_cmd];
+		break;
 	}
 
 	/*
@@ -1865,9 +1870,9 @@ static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
 		command->dma_dir = dma_dir;
 		command->dma_size = scsi_request_bufflen;
 		command->dma_type = CMD_DMA_SINGLE;
-		command->cmd_dma = pci_map_single (hi->host->pdev, scsi_request_buffer,
-						   command->dma_size,
-						   command->dma_dir);
+		command->cmd_dma =
+		    pci_map_single(hi->host->pdev, scsi_request_buffer,
+				   command->dma_size, command->dma_dir);
 		SBP2_DMA_ALLOC("single bulk");
 
 		/*
@@ -1954,7 +1959,7 @@ static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
 	memset(command_orb->cdb, 0, 12);
 	memcpy(command_orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd));
 
-	return(0);
+	return 0;
 }
 
 /*
@@ -1970,7 +1975,7 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
 
 	outstanding_orb_incr;
 	SBP2_ORB_DEBUG("sending command orb %p, total orbs = %x",
-			command_orb, global_outstanding_command_orbs);
+		       command_orb, global_outstanding_command_orbs);
 
 	pci_dma_sync_single_for_device(hi->host->pdev, command->command_orb_dma,
 				       sizeof(struct sbp2_command_orb),
@@ -2015,10 +2020,11 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
 		 * both by the sbp2 device and us.
 		 */
 		scsi_id->last_orb->next_ORB_lo =
-			cpu_to_be32(command->command_orb_dma);
+		    cpu_to_be32(command->command_orb_dma);
 		/* Tells hardware that this pointer is valid */
 		scsi_id->last_orb->next_ORB_hi = 0x0;
-		pci_dma_sync_single_for_device(hi->host->pdev, scsi_id->last_orb_dma,
+		pci_dma_sync_single_for_device(hi->host->pdev,
+					       scsi_id->last_orb_dma,
 					       sizeof(struct sbp2_command_orb),
 					       PCI_DMA_BIDIRECTIONAL);
 
@@ -2032,14 +2038,14 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
 
 		if (sbp2util_node_write_no_wait(ne, addr, &data, 4) < 0) {
 			SBP2_ERR("sbp2util_node_write_no_wait failed");
-			return(-EIO);
+			return -EIO;
 		}
 
 		scsi_id->last_orb = command_orb;
 		scsi_id->last_orb_dma = command->command_orb_dma;
 
 	}
-       	return(0);
+	return 0;
 }
 
 /*
@@ -2066,7 +2072,7 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
 	 */
 	command = sbp2util_allocate_command_orb(scsi_id, SCpnt, done);
 	if (!command) {
-		return(-EIO);
+		return -EIO;
 	}
 
 	/*
@@ -2101,10 +2107,9 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
 	 */
 	sbp2_link_orb_command(scsi_id, command);
 
-	return(0);
+	return 0;
 }
 
-
 /*
  * Translates SBP-2 status into SCSI sense data for check conditions
  */
@@ -2132,14 +2137,14 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense
 	sense_data[14] = sbp2_status[20];
 	sense_data[15] = sbp2_status[21];
 
-	return(sbp2_status[8] & 0x3f);	/* return scsi status */
+	return sbp2_status[8] & 0x3f;	/* return scsi status */
 }
 
 /*
  * This function is called after a command is completed, in order to do any necessary SBP-2
  * response data translations for the SCSI stack
  */
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, 
+static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
 				     struct scsi_cmnd *SCpnt)
 {
 	u8 *scsi_buf = SCpnt->request_buffer;
@@ -2148,24 +2153,24 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
 
 	switch (SCpnt->cmnd[0]) {
 
-		case INQUIRY:
-			/*
-			 * Make sure data length is ok. Minimum length is 36 bytes
-			 */
-			if (scsi_buf[4] == 0) {
-				scsi_buf[4] = 36 - 5;
-			}
+	case INQUIRY:
+		/*
+		 * Make sure data length is ok. Minimum length is 36 bytes
+		 */
+		if (scsi_buf[4] == 0) {
+			scsi_buf[4] = 36 - 5;
+		}
 
-			/*
-			 * Fix ansi revision and response data format
-			 */
-			scsi_buf[2] |= 2;
-			scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2;
+		/*
+		 * Fix ansi revision and response data format
+		 */
+		scsi_buf[2] |= 2;
+		scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2;
 
-			break;
+		break;
 
-		default:
-			break;
+	default:
+		break;
 	}
 	return;
 }
@@ -2190,14 +2195,14 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
 
 	if (!host) {
 		SBP2_ERR("host is NULL - this is bad!");
-		return(RCODE_ADDRESS_ERROR);
+		return RCODE_ADDRESS_ERROR;
 	}
 
 	hi = hpsb_get_hostinfo(&sbp2_highlevel, host);
 
 	if (!hi) {
 		SBP2_ERR("host info is NULL - this is bad!");
-		return(RCODE_ADDRESS_ERROR);
+		return RCODE_ADDRESS_ERROR;
 	}
 
 	/*
@@ -2214,7 +2219,7 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
 
 	if (!scsi_id) {
 		SBP2_ERR("scsi_id is NULL - device is gone?");
-		return(RCODE_ADDRESS_ERROR);
+		return RCODE_ADDRESS_ERROR;
 	}
 
 	/*
@@ -2312,10 +2317,9 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
 		SBP2_ORB_DEBUG("command orb completed");
 	}
 
-	return(RCODE_COMPLETE);
+	return RCODE_COMPLETE;
 }
 
-
 /**************************************
  * SCSI interface related section
  **************************************/
@@ -2448,55 +2452,56 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 	 * complete the command, just let it get retried at the end of the
 	 * bus reset.
 	 */
-	if (!hpsb_node_entry_valid(scsi_id->ne) && (scsi_status != SBP2_SCSI_STATUS_GOOD)) {
+	if (!hpsb_node_entry_valid(scsi_id->ne)
+	    && (scsi_status != SBP2_SCSI_STATUS_GOOD)) {
 		SBP2_ERR("Bus reset in progress - retry command later");
 		return;
 	}
- 
+
 	/*
 	 * Switch on scsi status
 	 */
 	switch (scsi_status) {
-		case SBP2_SCSI_STATUS_GOOD:
-			SCpnt->result = DID_OK;
-			break;
+	case SBP2_SCSI_STATUS_GOOD:
+		SCpnt->result = DID_OK;
+		break;
 
-		case SBP2_SCSI_STATUS_BUSY:
-			SBP2_ERR("SBP2_SCSI_STATUS_BUSY");
-			SCpnt->result = DID_BUS_BUSY << 16;
-			break;
+	case SBP2_SCSI_STATUS_BUSY:
+		SBP2_ERR("SBP2_SCSI_STATUS_BUSY");
+		SCpnt->result = DID_BUS_BUSY << 16;
+		break;
 
-		case SBP2_SCSI_STATUS_CHECK_CONDITION:
-			SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION");
-			SCpnt->result = CHECK_CONDITION << 1;
+	case SBP2_SCSI_STATUS_CHECK_CONDITION:
+		SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION");
+		SCpnt->result = CHECK_CONDITION << 1;
 
-			/*
-			 * Debug stuff
-			 */
+		/*
+		 * Debug stuff
+		 */
 #if CONFIG_IEEE1394_SBP2_DEBUG >= 1
-			scsi_print_command(SCpnt);
-			scsi_print_sense("bh", SCpnt);
+		scsi_print_command(SCpnt);
+		scsi_print_sense("bh", SCpnt);
 #endif
 
-			break;
+		break;
 
-		case SBP2_SCSI_STATUS_SELECTION_TIMEOUT:
-			SBP2_ERR("SBP2_SCSI_STATUS_SELECTION_TIMEOUT");
-			SCpnt->result = DID_NO_CONNECT << 16;
-			scsi_print_command(SCpnt);
-			break;
+	case SBP2_SCSI_STATUS_SELECTION_TIMEOUT:
+		SBP2_ERR("SBP2_SCSI_STATUS_SELECTION_TIMEOUT");
+		SCpnt->result = DID_NO_CONNECT << 16;
+		scsi_print_command(SCpnt);
+		break;
 
-		case SBP2_SCSI_STATUS_CONDITION_MET:
-		case SBP2_SCSI_STATUS_RESERVATION_CONFLICT:
-		case SBP2_SCSI_STATUS_COMMAND_TERMINATED:
-			SBP2_ERR("Bad SCSI status = %x", scsi_status);
-			SCpnt->result = DID_ERROR << 16;
-			scsi_print_command(SCpnt);
-			break;
+	case SBP2_SCSI_STATUS_CONDITION_MET:
+	case SBP2_SCSI_STATUS_RESERVATION_CONFLICT:
+	case SBP2_SCSI_STATUS_COMMAND_TERMINATED:
+		SBP2_ERR("Bad SCSI status = %x", scsi_status);
+		SCpnt->result = DID_ERROR << 16;
+		scsi_print_command(SCpnt);
+		break;
 
-		default:
-			SBP2_ERR("Unsupported SCSI status = %x", scsi_status);
-			SCpnt->result = DID_ERROR << 16;
+	default:
+		SBP2_ERR("Unsupported SCSI status = %x", scsi_status);
+		SCpnt->result = DID_ERROR << 16;
 	}
 
 	/*
@@ -2510,7 +2515,8 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 	 * If a bus reset is in progress and there was an error, complete
 	 * the command as busy so that it will get retried.
 	 */
-	if (!hpsb_node_entry_valid(scsi_id->ne) && (scsi_status != SBP2_SCSI_STATUS_GOOD)) {
+	if (!hpsb_node_entry_valid(scsi_id->ne)
+	    && (scsi_status != SBP2_SCSI_STATUS_GOOD)) {
 		SBP2_ERR("Completing command with busy (bus reset)");
 		SCpnt->result = DID_BUS_BUSY << 16;
 	}
@@ -2531,17 +2537,15 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 	/*
 	 * Tell scsi stack that we're done with this command
 	 */
-	done (SCpnt);
+	done(SCpnt);
 }
 
-
 static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
 {
 	((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev;
 	return 0;
 }
 
-
 static int sbp2scsi_slave_configure(struct scsi_device *sdev)
 {
 	blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
@@ -2550,14 +2554,12 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev)
 	return 0;
 }
 
-
 static void sbp2scsi_slave_destroy(struct scsi_device *sdev)
 {
 	((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = NULL;
 	return;
 }
 
-
 /*
  * Called by scsi stack when something has really gone wrong.  Usually
  * called when a command has timed-out for some reason.
@@ -2603,7 +2605,7 @@ static int sbp2scsi_abort(struct scsi_cmnd *SCpnt)
 		sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY);
 	}
 
-	return(SUCCESS);
+	return SUCCESS;
 }
 
 /*
@@ -2629,12 +2631,14 @@ static int sbp2scsi_reset(struct scsi_cmnd *SCpnt)
 	return SUCCESS;
 }
 
-static const char *sbp2scsi_info (struct Scsi_Host *host)
+static const char *sbp2scsi_info(struct Scsi_Host *host)
 {
-        return "SCSI emulation for IEEE-1394 SBP-2 Devices";
+	return "SCSI emulation for IEEE-1394 SBP-2 Devices";
 }
 
-static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
 {
 	struct scsi_device *sdev;
 	struct scsi_id_instance_data *scsi_id;
@@ -2705,7 +2709,6 @@ static int sbp2_module_init(void)
 	/* Set max sectors (module load option). Default is 255 sectors. */
 	scsi_driver_template.max_sectors = max_sectors;
 
-
 	/* Register our high level driver with 1394 stack */
 	hpsb_register_highlevel(&sbp2_highlevel);
 
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index 890be136552..abc647bae5b 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -119,8 +119,8 @@ struct sbp2_query_logins_response {
 struct sbp2_reconnect_orb {
 	u32 reserved1;
 	u32 reserved2;
-        u32 reserved3;
-        u32 reserved4;
+	u32 reserved3;
+	u32 reserved4;
 	u32 login_ID_misc;
 	u32 reserved5;
 	u32 status_FIFO_hi;
@@ -130,8 +130,8 @@ struct sbp2_reconnect_orb {
 struct sbp2_logout_orb {
 	u32 reserved1;
 	u32 reserved2;
-        u32 reserved3;
-        u32 reserved4;
+	u32 reserved3;
+	u32 reserved4;
 	u32 login_ID_misc;
 	u32 reserved5;
 	u32 status_FIFO_hi;
@@ -188,7 +188,7 @@ struct sbp2_unrestricted_page_table {
 struct sbp2_status_block {
 	u32 ORB_offset_hi_misc;
 	u32 ORB_offset_lo;
-        u8 command_set_dependent[24];
+	u8 command_set_dependent[24];
 };
 
 /*
@@ -211,7 +211,7 @@ struct sbp2_status_block {
  * specified for write posting, where the ohci controller will
  * automatically send an ack_complete when the status is written by the
  * sbp2 device... saving a split transaction.   =)
- */ 
+ */
 #define SBP2_STATUS_FIFO_ADDRESS				0xfffe00000000ULL
 #define SBP2_STATUS_FIFO_ADDRESS_HI                             0xfffe
 #define SBP2_STATUS_FIFO_ADDRESS_LO                             0x0
@@ -333,10 +333,8 @@ struct sbp2_command_info {
 #define SBP2_BREAKAGE_128K_MAX_TRANSFER		0x1
 #define SBP2_BREAKAGE_INQUIRY_HACK		0x2
 
-
 struct sbp2scsi_host_info;
 
-
 /*
  * Information needed on a per scsi id basis (one for each sbp2 device)
  */
@@ -406,7 +404,6 @@ struct scsi_id_instance_data {
 	u32 workarounds;
 };
 
-
 /* Sbp2 host data structure (one per IEEE1394 host) */
 struct sbp2scsi_host_info {
 	struct hpsb_host *host;		/* IEEE1394 host */