Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David S Miller:

 1) Remove the ipv4 routing cache.  Now lookups go directly into the FIB
    trie and use prebuilt routes cached there.

    No more garbage collection, no more rDOS attacks on the routing
    cache.  Instead we now get predictable and consistent performance,
    no matter what the pattern of traffic we service.

    This has been almost 2 years in the making.  Special thanks to
    Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
    have helped along the way.

    I'm sure that with a change of this magnitude there will be some
    kind of fallout, but such things ought the be simple to fix at this
    point.  Luckily I'm not European so I'll be around all of August to
    fix things :-)

    The major stages of this work here are each fronted by a forced
    merge commit whose commit message contains a top-level description
    of the motivations and implementation issues.

 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
    input.

 3) TCP SYN/ACK performance tweaks from Eric Dumazet.

 4) Add namespace support for netfilter L4 conntrack helpers, from Gao
    Feng.

 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
    Yuval Mintz.

 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

 7) Support for connection tracker helpers in userspace, from Pablo
    Neira Ayuso.

 8) Allow userspace driven TX load balancing functions in TEAM driver,
    from Jiri Pirko.

 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
    embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
    up in the packet scheduler layer.  Whereas the existing BQL (Byte
    Queue Limits) limits the pkt_sched --> netdevice queuing levels,
    this controls the TCP --> pkt_sched queueing levels.

    From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
    from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
    Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
    send data in the SYN exchange, from Yuchung Cheng.

    Basically, the sender queues up data with a sendmsg() call using
    MSG_FASTOPEN, then they do the connect() which emits the queued up
    fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
    hit a locked socket.  The TCP Small Queues changes added a
    tcp_release_cb() that allows us to queue work up to the
    release_sock() caller, and that's what we use here too.  From Eric
    Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
  genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
  r8169: revert "add byte queue limit support".
  ipv4: Change rt->rt_iif encoding.
  net: Make skb->skb_iif always track skb->dev
  ipv4: Prepare for change of rt->rt_iif encoding.
  ipv4: Remove all RTCF_DIRECTSRC handliing.
  ipv4: Really ignore ICMP address requests/replies.
  decnet: Don't set RTCF_DIRECTSRC.
  net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
  ipv4: Remove redundant assignment
  rds: set correct msg_namelen
  openvswitch: potential NULL deref in sample()
  tcp: dont drop MTU reduction indications
  bnx2x: Add new 57840 device IDs
  tcp: avoid oops in tcp_metrics and reset tcpm_stamp
  niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
  niu: Fix to check for dma mapping errors.
  net: Fix references to out-of-scope variables in put_cmsg_compat()
  net: ethernet: davinci_emac: add pm_runtime support
  net: ethernet: davinci_emac: Remove unnecessary #include
  ...

1 files changed, 968 insertions, 0 deletions

diff --git a/drivers/ieee802154/at86rf230.c b/drivers/ieee802154/at86rf230.c
new file mode 100644
index 00000000000..5d309408395
--- /dev/null
+++ b/drivers/ieee802154/at86rf230.c
@@ -0,0 +1,968 @@
+/*
+ * AT86RF230/RF231 driver
+ *
+ * Copyright (C) 2009-2012 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at86rf230.h>
+#include <linux/skbuff.h>
+
+#include <net/mac802154.h>
+#include <net/wpan-phy.h>
+
+struct at86rf230_local {
+	struct spi_device *spi;
+	int rstn, slp_tr, dig2;
+
+	u8 part;
+	u8 vers;
+
+	u8 buf[2];
+	struct mutex bmux;
+
+	struct work_struct irqwork;
+	struct completion tx_complete;
+
+	struct ieee802154_dev *dev;
+
+	spinlock_t lock;
+	bool irq_disabled;
+	bool is_tx;
+};
+
+#define	RG_TRX_STATUS	(0x01)
+#define	SR_TRX_STATUS		0x01, 0x1f, 0
+#define	SR_RESERVED_01_3	0x01, 0x20, 5
+#define	SR_CCA_STATUS		0x01, 0x40, 6
+#define	SR_CCA_DONE		0x01, 0x80, 7
+#define	RG_TRX_STATE	(0x02)
+#define	SR_TRX_CMD		0x02, 0x1f, 0
+#define	SR_TRAC_STATUS		0x02, 0xe0, 5
+#define	RG_TRX_CTRL_0	(0x03)
+#define	SR_CLKM_CTRL		0x03, 0x07, 0
+#define	SR_CLKM_SHA_SEL		0x03, 0x08, 3
+#define	SR_PAD_IO_CLKM		0x03, 0x30, 4
+#define	SR_PAD_IO		0x03, 0xc0, 6
+#define	RG_TRX_CTRL_1	(0x04)
+#define	SR_IRQ_POLARITY		0x04, 0x01, 0
+#define	SR_IRQ_MASK_MODE	0x04, 0x02, 1
+#define	SR_SPI_CMD_MODE		0x04, 0x0c, 2
+#define	SR_RX_BL_CTRL		0x04, 0x10, 4
+#define	SR_TX_AUTO_CRC_ON	0x04, 0x20, 5
+#define	SR_IRQ_2_EXT_EN		0x04, 0x40, 6
+#define	SR_PA_EXT_EN		0x04, 0x80, 7
+#define	RG_PHY_TX_PWR	(0x05)
+#define	SR_TX_PWR		0x05, 0x0f, 0
+#define	SR_PA_LT		0x05, 0x30, 4
+#define	SR_PA_BUF_LT		0x05, 0xc0, 6
+#define	RG_PHY_RSSI	(0x06)
+#define	SR_RSSI			0x06, 0x1f, 0
+#define	SR_RND_VALUE		0x06, 0x60, 5
+#define	SR_RX_CRC_VALID		0x06, 0x80, 7
+#define	RG_PHY_ED_LEVEL	(0x07)
+#define	SR_ED_LEVEL		0x07, 0xff, 0
+#define	RG_PHY_CC_CCA	(0x08)
+#define	SR_CHANNEL		0x08, 0x1f, 0
+#define	SR_CCA_MODE		0x08, 0x60, 5
+#define	SR_CCA_REQUEST		0x08, 0x80, 7
+#define	RG_CCA_THRES	(0x09)
+#define	SR_CCA_ED_THRES		0x09, 0x0f, 0
+#define	SR_RESERVED_09_1	0x09, 0xf0, 4
+#define	RG_RX_CTRL	(0x0a)
+#define	SR_PDT_THRES		0x0a, 0x0f, 0
+#define	SR_RESERVED_0a_1	0x0a, 0xf0, 4
+#define	RG_SFD_VALUE	(0x0b)
+#define	SR_SFD_VALUE		0x0b, 0xff, 0
+#define	RG_TRX_CTRL_2	(0x0c)
+#define	SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
+#define	SR_RESERVED_0c_2	0x0c, 0x7c, 2
+#define	SR_RX_SAFE_MODE		0x0c, 0x80, 7
+#define	RG_ANT_DIV	(0x0d)
+#define	SR_ANT_CTRL		0x0d, 0x03, 0
+#define	SR_ANT_EXT_SW_EN	0x0d, 0x04, 2
+#define	SR_ANT_DIV_EN		0x0d, 0x08, 3
+#define	SR_RESERVED_0d_2	0x0d, 0x70, 4
+#define	SR_ANT_SEL		0x0d, 0x80, 7
+#define	RG_IRQ_MASK	(0x0e)
+#define	SR_IRQ_MASK		0x0e, 0xff, 0
+#define	RG_IRQ_STATUS	(0x0f)
+#define	SR_IRQ_0_PLL_LOCK	0x0f, 0x01, 0
+#define	SR_IRQ_1_PLL_UNLOCK	0x0f, 0x02, 1
+#define	SR_IRQ_2_RX_START	0x0f, 0x04, 2
+#define	SR_IRQ_3_TRX_END	0x0f, 0x08, 3
+#define	SR_IRQ_4_CCA_ED_DONE	0x0f, 0x10, 4
+#define	SR_IRQ_5_AMI		0x0f, 0x20, 5
+#define	SR_IRQ_6_TRX_UR		0x0f, 0x40, 6
+#define	SR_IRQ_7_BAT_LOW	0x0f, 0x80, 7
+#define	RG_VREG_CTRL	(0x10)
+#define	SR_RESERVED_10_6	0x10, 0x03, 0
+#define	SR_DVDD_OK		0x10, 0x04, 2
+#define	SR_DVREG_EXT		0x10, 0x08, 3
+#define	SR_RESERVED_10_3	0x10, 0x30, 4
+#define	SR_AVDD_OK		0x10, 0x40, 6
+#define	SR_AVREG_EXT		0x10, 0x80, 7
+#define	RG_BATMON	(0x11)
+#define	SR_BATMON_VTH		0x11, 0x0f, 0
+#define	SR_BATMON_HR		0x11, 0x10, 4
+#define	SR_BATMON_OK		0x11, 0x20, 5
+#define	SR_RESERVED_11_1	0x11, 0xc0, 6
+#define	RG_XOSC_CTRL	(0x12)
+#define	SR_XTAL_TRIM		0x12, 0x0f, 0
+#define	SR_XTAL_MODE		0x12, 0xf0, 4
+#define	RG_RX_SYN	(0x15)
+#define	SR_RX_PDT_LEVEL		0x15, 0x0f, 0
+#define	SR_RESERVED_15_2	0x15, 0x70, 4
+#define	SR_RX_PDT_DIS		0x15, 0x80, 7
+#define	RG_XAH_CTRL_1	(0x17)
+#define	SR_RESERVED_17_8	0x17, 0x01, 0
+#define	SR_AACK_PROM_MODE	0x17, 0x02, 1
+#define	SR_AACK_ACK_TIME	0x17, 0x04, 2
+#define	SR_RESERVED_17_5	0x17, 0x08, 3
+#define	SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
+#define	SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
+#define	SR_RESERVED_17_2	0x17, 0x40, 6
+#define	SR_RESERVED_17_1	0x17, 0x80, 7
+#define	RG_FTN_CTRL	(0x18)
+#define	SR_RESERVED_18_2	0x18, 0x7f, 0
+#define	SR_FTN_START		0x18, 0x80, 7
+#define	RG_PLL_CF	(0x1a)
+#define	SR_RESERVED_1a_2	0x1a, 0x7f, 0
+#define	SR_PLL_CF_START		0x1a, 0x80, 7
+#define	RG_PLL_DCU	(0x1b)
+#define	SR_RESERVED_1b_3	0x1b, 0x3f, 0
+#define	SR_RESERVED_1b_2	0x1b, 0x40, 6
+#define	SR_PLL_DCU_START	0x1b, 0x80, 7
+#define	RG_PART_NUM	(0x1c)
+#define	SR_PART_NUM		0x1c, 0xff, 0
+#define	RG_VERSION_NUM	(0x1d)
+#define	SR_VERSION_NUM		0x1d, 0xff, 0
+#define	RG_MAN_ID_0	(0x1e)
+#define	SR_MAN_ID_0		0x1e, 0xff, 0
+#define	RG_MAN_ID_1	(0x1f)
+#define	SR_MAN_ID_1		0x1f, 0xff, 0
+#define	RG_SHORT_ADDR_0	(0x20)
+#define	SR_SHORT_ADDR_0		0x20, 0xff, 0
+#define	RG_SHORT_ADDR_1	(0x21)
+#define	SR_SHORT_ADDR_1		0x21, 0xff, 0
+#define	RG_PAN_ID_0	(0x22)
+#define	SR_PAN_ID_0		0x22, 0xff, 0
+#define	RG_PAN_ID_1	(0x23)
+#define	SR_PAN_ID_1		0x23, 0xff, 0
+#define	RG_IEEE_ADDR_0	(0x24)
+#define	SR_IEEE_ADDR_0		0x24, 0xff, 0
+#define	RG_IEEE_ADDR_1	(0x25)
+#define	SR_IEEE_ADDR_1		0x25, 0xff, 0
+#define	RG_IEEE_ADDR_2	(0x26)
+#define	SR_IEEE_ADDR_2		0x26, 0xff, 0
+#define	RG_IEEE_ADDR_3	(0x27)
+#define	SR_IEEE_ADDR_3		0x27, 0xff, 0
+#define	RG_IEEE_ADDR_4	(0x28)
+#define	SR_IEEE_ADDR_4		0x28, 0xff, 0
+#define	RG_IEEE_ADDR_5	(0x29)
+#define	SR_IEEE_ADDR_5		0x29, 0xff, 0
+#define	RG_IEEE_ADDR_6	(0x2a)
+#define	SR_IEEE_ADDR_6		0x2a, 0xff, 0
+#define	RG_IEEE_ADDR_7	(0x2b)
+#define	SR_IEEE_ADDR_7		0x2b, 0xff, 0
+#define	RG_XAH_CTRL_0	(0x2c)
+#define	SR_SLOTTED_OPERATION	0x2c, 0x01, 0
+#define	SR_MAX_CSMA_RETRIES	0x2c, 0x0e, 1
+#define	SR_MAX_FRAME_RETRIES	0x2c, 0xf0, 4
+#define	RG_CSMA_SEED_0	(0x2d)
+#define	SR_CSMA_SEED_0		0x2d, 0xff, 0
+#define	RG_CSMA_SEED_1	(0x2e)
+#define	SR_CSMA_SEED_1		0x2e, 0x07, 0
+#define	SR_AACK_I_AM_COORD	0x2e, 0x08, 3
+#define	SR_AACK_DIS_ACK		0x2e, 0x10, 4
+#define	SR_AACK_SET_PD		0x2e, 0x20, 5
+#define	SR_AACK_FVN_MODE	0x2e, 0xc0, 6
+#define	RG_CSMA_BE	(0x2f)
+#define	SR_MIN_BE		0x2f, 0x0f, 0
+#define	SR_MAX_BE		0x2f, 0xf0, 4
+
+#define CMD_REG		0x80
+#define CMD_REG_MASK	0x3f
+#define CMD_WRITE	0x40
+#define CMD_FB		0x20
+
+#define IRQ_BAT_LOW	(1 << 7)
+#define IRQ_TRX_UR	(1 << 6)
+#define IRQ_AMI		(1 << 5)
+#define IRQ_CCA_ED	(1 << 4)
+#define IRQ_TRX_END	(1 << 3)
+#define IRQ_RX_START	(1 << 2)
+#define IRQ_PLL_UNL	(1 << 1)
+#define IRQ_PLL_LOCK	(1 << 0)
+
+#define STATE_P_ON		0x00	/* BUSY */
+#define STATE_BUSY_RX		0x01
+#define STATE_BUSY_TX		0x02
+#define STATE_FORCE_TRX_OFF	0x03
+#define STATE_FORCE_TX_ON	0x04	/* IDLE */
+/* 0x05 */				/* INVALID_PARAMETER */
+#define STATE_RX_ON		0x06
+/* 0x07 */				/* SUCCESS */
+#define STATE_TRX_OFF		0x08
+#define STATE_TX_ON		0x09
+/* 0x0a - 0x0e */			/* 0x0a - UNSUPPORTED_ATTRIBUTE */
+#define STATE_SLEEP		0x0F
+#define STATE_BUSY_RX_AACK	0x11
+#define STATE_BUSY_TX_ARET	0x12
+#define STATE_BUSY_RX_AACK_ON	0x16
+#define STATE_BUSY_TX_ARET_ON	0x19
+#define STATE_RX_ON_NOCLK	0x1C
+#define STATE_RX_AACK_ON_NOCLK	0x1D
+#define STATE_BUSY_RX_AACK_NOCLK 0x1E
+#define STATE_TRANSITION_IN_PROGRESS 0x1F
+
+static int
+__at86rf230_write(struct at86rf230_local *lp, u8 addr, u8 data)
+{
+	u8 *buf = lp->buf;
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len	= 2,
+		.tx_buf	= buf,
+	};
+
+	buf[0] = (addr & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
+	buf[1] = data;
+	dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
+	dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	status = spi_sync(lp->spi, &msg);
+	dev_vdbg(&lp->spi->dev, "status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+
+	dev_vdbg(&lp->spi->dev, "status = %d\n", status);
+	dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
+	dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
+
+	return status;
+}
+
+static int
+__at86rf230_read_subreg(struct at86rf230_local *lp,
+			u8 addr, u8 mask, int shift, u8 *data)
+{
+	u8 *buf = lp->buf;
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len	= 2,
+		.tx_buf	= buf,
+		.rx_buf	= buf,
+	};
+
+	buf[0] = (addr & CMD_REG_MASK) | CMD_REG;
+	buf[1] = 0xff;
+	dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	status = spi_sync(lp->spi, &msg);
+	dev_vdbg(&lp->spi->dev, "status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+
+	dev_vdbg(&lp->spi->dev, "status = %d\n", status);
+	dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
+	dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
+
+	if (status == 0)
+		*data = buf[1];
+
+	return status;
+}
+
+static int
+at86rf230_read_subreg(struct at86rf230_local *lp,
+		      u8 addr, u8 mask, int shift, u8 *data)
+{
+	int status;
+
+	mutex_lock(&lp->bmux);
+	status = __at86rf230_read_subreg(lp, addr, mask, shift, data);
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int
+at86rf230_write_subreg(struct at86rf230_local *lp,
+		       u8 addr, u8 mask, int shift, u8 data)
+{
+	int status;
+	u8 val;
+
+	mutex_lock(&lp->bmux);
+	status = __at86rf230_read_subreg(lp, addr, 0xff, 0, &val);
+	if (status)
+		goto out;
+
+	val &= ~mask;
+	val |= (data << shift) & mask;
+
+	status = __at86rf230_write(lp, addr, val);
+out:
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int
+at86rf230_write_fbuf(struct at86rf230_local *lp, u8 *data, u8 len)
+{
+	u8 *buf = lp->buf;
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer_head = {
+		.len		= 2,
+		.tx_buf		= buf,
+
+	};
+	struct spi_transfer xfer_buf = {
+		.len		= len,
+		.tx_buf		= data,
+	};
+
+	mutex_lock(&lp->bmux);
+	buf[0] = CMD_WRITE | CMD_FB;
+	buf[1] = len + 2; /* 2 bytes for CRC that isn't written */
+
+	dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
+	dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	status = spi_sync(lp->spi, &msg);
+	dev_vdbg(&lp->spi->dev, "status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+
+	dev_vdbg(&lp->spi->dev, "status = %d\n", status);
+	dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
+	dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
+
+	mutex_unlock(&lp->bmux);
+	return status;
+}
+
+static int
+at86rf230_read_fbuf(struct at86rf230_local *lp, u8 *data, u8 *len, u8 *lqi)
+{
+	u8 *buf = lp->buf;
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer_head = {
+		.len		= 2,
+		.tx_buf		= buf,
+		.rx_buf		= buf,
+	};
+	struct spi_transfer xfer_head1 = {
+		.len		= 2,
+		.tx_buf		= buf,
+		.rx_buf		= buf,
+	};
+	struct spi_transfer xfer_buf = {
+		.len		= 0,
+		.rx_buf		= data,
+	};
+
+	mutex_lock(&lp->bmux);
+
+	buf[0] = CMD_FB;
+	buf[1] = 0x00;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+
+	status = spi_sync(lp->spi, &msg);
+	dev_vdbg(&lp->spi->dev, "status = %d\n", status);
+
+	xfer_buf.len = *(buf + 1) + 1;
+	*len = buf[1];
+
+	buf[0] = CMD_FB;
+	buf[1] = 0x00;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head1, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	status = spi_sync(lp->spi, &msg);
+
+	if (msg.status)
+		status = msg.status;
+
+	dev_vdbg(&lp->spi->dev, "status = %d\n", status);
+	dev_vdbg(&lp->spi->dev, "buf[0] = %02x\n", buf[0]);
+	dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
+
+	if (status) {
+		if (lqi && (*len > lp->buf[1]))
+			*lqi = data[lp->buf[1]];
+	}
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int
+at86rf230_ed(struct ieee802154_dev *dev, u8 *level)
+{
+	might_sleep();
+	BUG_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int
+at86rf230_state(struct ieee802154_dev *dev, int state)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int rc;
+	u8 val;
+	u8 desired_status;
+
+	might_sleep();
+
+	if (state == STATE_FORCE_TX_ON)
+		desired_status = STATE_TX_ON;
+	else if (state == STATE_FORCE_TRX_OFF)
+		desired_status = STATE_TRX_OFF;
+	else
+		desired_status = state;
+
+	do {
+		rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &val);
+		if (rc)
+			goto err;
+	} while (val == STATE_TRANSITION_IN_PROGRESS);
+
+	if (val == desired_status)
+		return 0;
+
+	/* state is equal to phy states */
+	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, state);
+	if (rc)
+		goto err;
+
+	do {
+		rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &val);
+		if (rc)
+			goto err;
+	} while (val == STATE_TRANSITION_IN_PROGRESS);
+
+
+	if (val == desired_status)
+		return 0;
+
+	pr_err("unexpected state change: %d, asked for %d\n", val, state);
+	return -EBUSY;
+
+err:
+	pr_err("error: %d\n", rc);
+	return rc;
+}
+
+static int
+at86rf230_start(struct ieee802154_dev *dev)
+{
+	struct at86rf230_local *lp = dev->priv;
+	u8 rc;
+
+	rc = at86rf230_write_subreg(lp, SR_RX_SAFE_MODE, 1);
+	if (rc)
+		return rc;
+
+	return at86rf230_state(dev, STATE_RX_ON);
+}
+
+static void
+at86rf230_stop(struct ieee802154_dev *dev)
+{
+	at86rf230_state(dev, STATE_FORCE_TRX_OFF);
+}
+
+static int
+at86rf230_channel(struct ieee802154_dev *dev, int page, int channel)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int rc;
+
+	might_sleep();
+
+	if (page != 0 || channel < 11 || channel > 26) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	rc = at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+	msleep(1); /* Wait for PLL */
+	dev->phy->current_channel = channel;
+
+	return 0;
+}
+
+static int
+at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int rc;
+	unsigned long flags;
+
+	spin_lock(&lp->lock);
+	if  (lp->irq_disabled) {
+		spin_unlock(&lp->lock);
+		return -EBUSY;
+	}
+	spin_unlock(&lp->lock);
+
+	might_sleep();
+
+	rc = at86rf230_state(dev, STATE_FORCE_TX_ON);
+	if (rc)
+		goto err;
+
+	spin_lock_irqsave(&lp->lock, flags);
+	lp->is_tx = 1;
+	INIT_COMPLETION(lp->tx_complete);
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	rc = at86rf230_write_fbuf(lp, skb->data, skb->len);
+	if (rc)
+		goto err_rx;
+
+	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_BUSY_TX);
+	if (rc)
+		goto err_rx;
+
+	rc = wait_for_completion_interruptible(&lp->tx_complete);
+	if (rc < 0)
+		goto err_rx;
+
+	rc = at86rf230_start(dev);
+
+	return rc;
+
+err_rx:
+	at86rf230_start(dev);
+err:
+	pr_err("error: %d\n", rc);
+
+	spin_lock_irqsave(&lp->lock, flags);
+	lp->is_tx = 0;
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	return rc;
+}
+
+static int at86rf230_rx(struct at86rf230_local *lp)
+{
+	u8 len = 128, lqi = 0;
+	struct sk_buff *skb;
+
+	skb = alloc_skb(len, GFP_KERNEL);
+
+	if (!skb)
+		return -ENOMEM;
+
+	if (at86rf230_read_fbuf(lp, skb_put(skb, len), &len, &lqi))
+		goto err;
+
+	if (len < 2)
+		goto err;
+
+	skb_trim(skb, len - 2); /* We do not put CRC into the frame */
+
+	ieee802154_rx_irqsafe(lp->dev, skb, lqi);
+
+	dev_dbg(&lp->spi->dev, "READ_FBUF: %d %x\n", len, lqi);
+
+	return 0;
+err:
+	pr_debug("received frame is too small\n");
+
+	kfree_skb(skb);
+	return -EINVAL;
+}
+
+static struct ieee802154_ops at86rf230_ops = {
+	.owner = THIS_MODULE,
+	.xmit = at86rf230_xmit,
+	.ed = at86rf230_ed,
+	.set_channel = at86rf230_channel,
+	.start = at86rf230_start,
+	.stop = at86rf230_stop,
+};
+
+static void at86rf230_irqwork(struct work_struct *work)
+{
+	struct at86rf230_local *lp =
+		container_of(work, struct at86rf230_local, irqwork);
+	u8 status = 0, val;
+	int rc;
+	unsigned long flags;
+
+	rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &val);
+	status |= val;
+
+	status &= ~IRQ_PLL_LOCK; /* ignore */
+	status &= ~IRQ_RX_START; /* ignore */
+	status &= ~IRQ_AMI; /* ignore */
+	status &= ~IRQ_TRX_UR; /* FIXME: possibly handle ???*/
+
+	if (status & IRQ_TRX_END) {
+		spin_lock_irqsave(&lp->lock, flags);
+		status &= ~IRQ_TRX_END;
+		if (lp->is_tx) {
+			lp->is_tx = 0;
+			spin_unlock_irqrestore(&lp->lock, flags);
+			complete(&lp->tx_complete);
+		} else {
+			spin_unlock_irqrestore(&lp->lock, flags);
+			at86rf230_rx(lp);
+		}
+	}
+
+	spin_lock_irqsave(&lp->lock, flags);
+	lp->irq_disabled = 0;
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	enable_irq(lp->spi->irq);
+}
+
+static irqreturn_t at86rf230_isr(int irq, void *data)
+{
+	struct at86rf230_local *lp = data;
+
+	disable_irq_nosync(irq);
+
+	spin_lock(&lp->lock);
+	lp->irq_disabled = 1;
+	spin_unlock(&lp->lock);
+
+	schedule_work(&lp->irqwork);
+
+	return IRQ_HANDLED;
+}
+
+
+static int at86rf230_hw_init(struct at86rf230_local *lp)
+{
+	u8 status;
+	int rc;
+
+	rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
+	if (rc)
+		return rc;
+
+	dev_info(&lp->spi->dev, "Status: %02x\n", status);
+	if (status == STATE_P_ON) {
+		rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TRX_OFF);
+		if (rc)
+			return rc;
+		msleep(1);
+		rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
+		if (rc)
+			return rc;
+		dev_info(&lp->spi->dev, "Status: %02x\n", status);
+	}
+
+	rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, 0xff); /* IRQ_TRX_UR |
+							     * IRQ_CCA_ED |
+							     * IRQ_TRX_END |
+							     * IRQ_PLL_UNL |
+							     * IRQ_PLL_LOCK
+							     */
+	if (rc)
+		return rc;
+
+	/* CLKM changes are applied immediately */
+	rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00);
+	if (rc)
+		return rc;
+
+	/* Turn CLKM Off */
+	rc = at86rf230_write_subreg(lp, SR_CLKM_CTRL, 0x00);
+	if (rc)
+		return rc;
+	/* Wait the next SLEEP cycle */
+	msleep(100);
+
+	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TX_ON);
+	if (rc)
+		return rc;
+	msleep(1);
+
+	rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
+	if (rc)
+		return rc;
+	dev_info(&lp->spi->dev, "Status: %02x\n", status);
+
+	rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &status);
+	if (rc)
+		return rc;
+	if (!status) {
+		dev_err(&lp->spi->dev, "DVDD error\n");
+		return -EINVAL;
+	}
+
+	rc = at86rf230_read_subreg(lp, SR_AVDD_OK, &status);
+	if (rc)
+		return rc;
+	if (!status) {
+		dev_err(&lp->spi->dev, "AVDD error\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int at86rf230_suspend(struct spi_device *spi, pm_message_t message)
+{
+	return 0;
+}
+
+static int at86rf230_resume(struct spi_device *spi)
+{
+	return 0;
+}
+
+static int at86rf230_fill_data(struct spi_device *spi)
+{
+	struct at86rf230_local *lp = spi_get_drvdata(spi);
+	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&spi->dev, "no platform_data\n");
+		return -EINVAL;
+	}
+
+	lp->rstn = pdata->rstn;
+	lp->slp_tr = pdata->slp_tr;
+	lp->dig2 = pdata->dig2;
+
+	return 0;
+}
+
+static int __devinit at86rf230_probe(struct spi_device *spi)
+{
+	struct ieee802154_dev *dev;
+	struct at86rf230_local *lp;
+	u8 man_id_0, man_id_1;
+	int rc;
+	const char *chip;
+	int supported = 0;
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	dev = ieee802154_alloc_device(sizeof(*lp), &at86rf230_ops);
+	if (!dev)
+		return -ENOMEM;
+
+	lp = dev->priv;
+	lp->dev = dev;
+
+	lp->spi = spi;
+
+	dev->priv = lp;
+	dev->parent = &spi->dev;
+	dev->extra_tx_headroom = 0;
+	/* We do support only 2.4 Ghz */
+	dev->phy->channels_supported[0] = 0x7FFF800;
+	dev->flags = IEEE802154_HW_OMIT_CKSUM;
+
+	mutex_init(&lp->bmux);
+	INIT_WORK(&lp->irqwork, at86rf230_irqwork);
+	spin_lock_init(&lp->lock);
+	init_completion(&lp->tx_complete);
+
+	spi_set_drvdata(spi, lp);
+
+	rc = at86rf230_fill_data(spi);
+	if (rc)
+		goto err_fill;
+
+	rc = gpio_request(lp->rstn, "rstn");
+	if (rc)
+		goto err_rstn;
+
+	if (gpio_is_valid(lp->slp_tr)) {
+		rc = gpio_request(lp->slp_tr, "slp_tr");
+		if (rc)
+			goto err_slp_tr;
+	}
+
+	rc = gpio_direction_output(lp->rstn, 1);
+	if (rc)
+		goto err_gpio_dir;
+
+	if (gpio_is_valid(lp->slp_tr)) {
+		rc = gpio_direction_output(lp->slp_tr, 0);
+		if (rc)
+			goto err_gpio_dir;
+	}
+
+	/* Reset */
+	msleep(1);
+	gpio_set_value(lp->rstn, 0);
+	msleep(1);
+	gpio_set_value(lp->rstn, 1);
+	msleep(1);
+
+	rc = at86rf230_read_subreg(lp, SR_MAN_ID_0, &man_id_0);
+	if (rc)
+		goto err_gpio_dir;
+	rc = at86rf230_read_subreg(lp, SR_MAN_ID_1, &man_id_1);
+	if (rc)
+		goto err_gpio_dir;
+
+	if (man_id_1 != 0x00 || man_id_0 != 0x1f) {
+		dev_err(&spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
+			man_id_1, man_id_0);
+		rc = -EINVAL;
+		goto err_gpio_dir;
+	}
+
+	rc = at86rf230_read_subreg(lp, SR_PART_NUM, &lp->part);
+	if (rc)
+		goto err_gpio_dir;
+
+	rc = at86rf230_read_subreg(lp, SR_VERSION_NUM, &lp->vers);
+	if (rc)
+		goto err_gpio_dir;
+
+	switch (lp->part) {
+	case 2:
+		chip = "at86rf230";
+		/* supported = 1;  FIXME: should be easy to support; */
+		break;
+	case 3:
+		chip = "at86rf231";
+		supported = 1;
+		break;
+	default:
+		chip = "UNKNOWN";
+		break;
+	}
+
+	dev_info(&spi->dev, "Detected %s chip version %d\n", chip, lp->vers);
+	if (!supported) {
+		rc = -ENOTSUPP;
+		goto err_gpio_dir;
+	}
+
+	rc = at86rf230_hw_init(lp);
+	if (rc)
+		goto err_gpio_dir;
+
+	rc = request_irq(spi->irq, at86rf230_isr, IRQF_SHARED,
+			 dev_name(&spi->dev), lp);
+	if (rc)
+		goto err_gpio_dir;
+
+	rc = ieee802154_register_device(lp->dev);
+	if (rc)
+		goto err_irq;
+
+	return rc;
+
+	ieee802154_unregister_device(lp->dev);
+err_irq:
+	free_irq(spi->irq, lp);
+	flush_work(&lp->irqwork);
+err_gpio_dir:
+	if (gpio_is_valid(lp->slp_tr))
+		gpio_free(lp->slp_tr);
+err_slp_tr:
+	gpio_free(lp->rstn);
+err_rstn:
+err_fill:
+	spi_set_drvdata(spi, NULL);
+	mutex_destroy(&lp->bmux);
+	ieee802154_free_device(lp->dev);
+	return rc;
+}
+
+static int __devexit at86rf230_remove(struct spi_device *spi)
+{
+	struct at86rf230_local *lp = spi_get_drvdata(spi);
+
+	ieee802154_unregister_device(lp->dev);
+
+	free_irq(spi->irq, lp);
+	flush_work(&lp->irqwork);
+
+	if (gpio_is_valid(lp->slp_tr))
+		gpio_free(lp->slp_tr);
+	gpio_free(lp->rstn);
+
+	spi_set_drvdata(spi, NULL);
+	mutex_destroy(&lp->bmux);
+	ieee802154_free_device(lp->dev);
+
+	dev_dbg(&spi->dev, "unregistered at86rf230\n");
+	return 0;
+}
+
+static struct spi_driver at86rf230_driver = {
+	.driver = {
+		.name	= "at86rf230",
+		.owner	= THIS_MODULE,
+	},
+	.probe      = at86rf230_probe,
+	.remove     = __devexit_p(at86rf230_remove),
+	.suspend    = at86rf230_suspend,
+	.resume     = at86rf230_resume,
+};
+
+static int __init at86rf230_init(void)
+{
+	return spi_register_driver(&at86rf230_driver);
+}
+module_init(at86rf230_init);
+
+static void __exit at86rf230_exit(void)
+{
+	spi_unregister_driver(&at86rf230_driver);
+}
+module_exit(at86rf230_exit);
+
+MODULE_DESCRIPTION("AT86RF230 Transceiver Driver");
+MODULE_LICENSE("GPL v2");