Merge branch 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers into asm-generic

Patches from David Howells <dhowells@redhat.com>:

This is to complete part of the UAPI disintegration for which the
preparatory patches were pulled recently.

Note that there are some fixup patches which are at the base of the
branch aimed at you, plus all arches get the asm-generic branch merged in too.

* 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/asm-generic
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

40 files changed, 5056 insertions, 299 deletions

diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index d4984c8be97..6e3f143fc71 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -1,5 +1,5 @@
 #
-# Industrial I/O subsytem configuration
+# Industrial I/O subsystem configuration
 #
 
 menuconfig IIO
@@ -54,10 +54,15 @@ config IIO_CONSUMERS_PER_TRIGGER
 	This value controls the maximum number of consumers that a
 	given trigger may handle. Default is 2.
 
+source "drivers/iio/accel/Kconfig"
 source "drivers/iio/adc/Kconfig"
 source "drivers/iio/amplifiers/Kconfig"
 source "drivers/iio/light/Kconfig"
 source "drivers/iio/frequency/Kconfig"
 source "drivers/iio/dac/Kconfig"
+source "drivers/iio/common/Kconfig"
+source "drivers/iio/gyro/Kconfig"
+source "drivers/iio/light/Kconfig"
+source "drivers/iio/magnetometer/Kconfig"
 
 endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index 34309abb797..f7fa3c0867b 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -10,8 +10,13 @@ industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
 obj-$(CONFIG_IIO_TRIGGERED_BUFFER) += industrialio-triggered-buffer.o
 obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
 
+obj-y += accel/
 obj-y += adc/
 obj-y += amplifiers/
 obj-y += light/
 obj-y += frequency/
 obj-y += dac/
+obj-y += common/
+obj-y += gyro/
+obj-y += light/
+obj-y += magnetometer/
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
new file mode 100644
index 00000000000..b2510c4d9a5
--- /dev/null
+++ b/drivers/iio/accel/Kconfig
@@ -0,0 +1,16 @@
+#
+# Accelerometer drivers
+#
+menu "Accelerometers"
+
+config HID_SENSOR_ACCEL_3D
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	tristate "HID Acelerometers 3D"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  accelerometers 3D.
+
+endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
new file mode 100644
index 00000000000..5bc6855a973
--- /dev/null
+++ b/drivers/iio/accel/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for industrial I/O accelerometer drivers
+#
+
+obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
new file mode 100644
index 00000000000..314a4057879
--- /dev/null
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -0,0 +1,418 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include "../common/hid-sensors/hid-sensor-attributes.h"
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+/*Format: HID-SENSOR-usage_id_in_hex*/
+/*Usage ID from spec for Accelerometer-3D: 0x200073*/
+#define DRIVER_NAME "HID-SENSOR-200073"
+
+enum accel_3d_channel {
+	CHANNEL_SCAN_INDEX_X,
+	CHANNEL_SCAN_INDEX_Y,
+	CHANNEL_SCAN_INDEX_Z,
+	ACCEL_3D_CHANNEL_MAX,
+};
+
+struct accel_3d_state {
+	struct hid_sensor_hub_callbacks callbacks;
+	struct hid_sensor_iio_common common_attributes;
+	struct hid_sensor_hub_attribute_info accel[ACCEL_3D_CHANNEL_MAX];
+	u32 accel_val[ACCEL_3D_CHANNEL_MAX];
+};
+
+static const u32 accel_3d_addresses[ACCEL_3D_CHANNEL_MAX] = {
+	HID_USAGE_SENSOR_ACCEL_X_AXIS,
+	HID_USAGE_SENSOR_ACCEL_Y_AXIS,
+	HID_USAGE_SENSOR_ACCEL_Z_AXIS
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec accel_3d_channels[] = {
+	{
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_X,
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_Y,
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_Z,
+	}
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void accel_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+						int channel, int size)
+{
+	channels[channel].scan_type.sign = 's';
+	/* Real storage bits will change based on the report desc. */
+	channels[channel].scan_type.realbits = size * 8;
+	/* Maximum size of a sample to capture is u32 */
+	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
+}
+
+/* Channel read_raw handler */
+static int accel_3d_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+	int report_id = -1;
+	u32 address;
+	int ret;
+	int ret_type;
+
+	*val = 0;
+	*val2 = 0;
+	switch (mask) {
+	case 0:
+		report_id = accel_state->accel[chan->scan_index].report_id;
+		address = accel_3d_addresses[chan->scan_index];
+		if (report_id >= 0)
+			*val = sensor_hub_input_attr_get_raw_value(
+				accel_state->common_attributes.hsdev,
+				HID_USAGE_SENSOR_ACCEL_3D, address,
+				report_id);
+		else {
+			*val = 0;
+			return -EINVAL;
+		}
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = accel_state->accel[CHANNEL_SCAN_INDEX_X].units;
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = hid_sensor_convert_exponent(
+			accel_state->accel[CHANNEL_SCAN_INDEX_X].unit_expo);
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_read_samp_freq_value(
+			&accel_state->common_attributes, val, val2);
+		ret_type = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_read_raw_hyst_value(
+			&accel_state->common_attributes, val, val2);
+		ret_type = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret_type = -EINVAL;
+		break;
+	}
+
+	return ret_type;
+}
+
+/* Channel write_raw handler */
+static int accel_3d_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_write_samp_freq_value(
+				&accel_state->common_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_write_raw_hyst_value(
+				&accel_state->common_attributes, val, val2);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int accel_3d_write_raw_get_fmt(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       long mask)
+{
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static const struct iio_info accel_3d_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &accel_3d_read_raw,
+	.write_raw = &accel_3d_write_raw,
+	.write_raw_get_fmt = &accel_3d_write_raw_get_fmt,
+};
+
+/* Function to push data to buffer */
+static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
+	int datum_sz;
+
+	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
+	if (!buffer) {
+		dev_err(&indio_dev->dev, "Buffer == NULL\n");
+		return;
+	}
+	datum_sz = buffer->access->get_bytes_per_datum(buffer);
+	if (len > datum_sz) {
+		dev_err(&indio_dev->dev, "Datum size mismatch %d:%d\n", len,
+				datum_sz);
+		return;
+	}
+	iio_push_to_buffer(buffer, (u8 *)data);
+}
+
+/* Callback handler to send event after all samples are received and captured */
+static int accel_3d_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+
+	dev_dbg(&indio_dev->dev, "accel_3d_proc_event [%d]\n",
+				accel_state->common_attributes.data_ready);
+	if (accel_state->common_attributes.data_ready)
+		hid_sensor_push_data(indio_dev,
+				(u8 *)accel_state->accel_val,
+				sizeof(accel_state->accel_val));
+
+	return 0;
+}
+
+/* Capture samples in local storage */
+static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				size_t raw_len, char *raw_data,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
+	int offset;
+	int ret = -EINVAL;
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_ACCEL_X_AXIS:
+	case HID_USAGE_SENSOR_ACCEL_Y_AXIS:
+	case HID_USAGE_SENSOR_ACCEL_Z_AXIS:
+		offset = usage_id - HID_USAGE_SENSOR_ACCEL_X_AXIS;
+		accel_state->accel_val[CHANNEL_SCAN_INDEX_X + offset] =
+						*(u32 *)raw_data;
+		ret = 0;
+	break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/* Parse report which is specific to an usage id*/
+static int accel_3d_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				struct iio_chan_spec *channels,
+				unsigned usage_id,
+				struct accel_3d_state *st)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
+		ret = sensor_hub_input_get_attribute_info(hsdev,
+				HID_INPUT_REPORT,
+				usage_id,
+				HID_USAGE_SENSOR_ACCEL_X_AXIS + i,
+				&st->accel[CHANNEL_SCAN_INDEX_X + i]);
+		if (ret < 0)
+			break;
+		accel_3d_adjust_channel_bit_mask(channels,
+				CHANNEL_SCAN_INDEX_X + i,
+				st->accel[CHANNEL_SCAN_INDEX_X + i].size);
+	}
+	dev_dbg(&pdev->dev, "accel_3d %x:%x, %x:%x, %x:%x\n",
+			st->accel[0].index,
+			st->accel[0].report_id,
+			st->accel[1].index, st->accel[1].report_id,
+			st->accel[2].index, st->accel[2].report_id);
+
+	return ret;
+}
+
+/* Function to initialize the processing for usage id */
+static int __devinit hid_accel_3d_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	static const char *name = "accel_3d";
+	struct iio_dev *indio_dev;
+	struct accel_3d_state *accel_state;
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_chan_spec *channels;
+
+	indio_dev = iio_device_alloc(sizeof(struct accel_3d_state));
+	if (indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	platform_set_drvdata(pdev, indio_dev);
+
+	accel_state = iio_priv(indio_dev);
+	accel_state->common_attributes.hsdev = hsdev;
+	accel_state->common_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev,
+					HID_USAGE_SENSOR_ACCEL_3D,
+					&accel_state->common_attributes);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup common attributes\n");
+		goto error_free_dev;
+	}
+
+	channels = kmemdup(accel_3d_channels,
+					sizeof(accel_3d_channels),
+					GFP_KERNEL);
+	if (!channels) {
+		dev_err(&pdev->dev, "failed to duplicate channels\n");
+		goto error_free_dev;
+	}
+
+	ret = accel_3d_parse_report(pdev, hsdev, channels,
+					HID_USAGE_SENSOR_ACCEL_3D, accel_state);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup attributes\n");
+		goto error_free_dev_mem;
+	}
+
+	indio_dev->channels = channels;
+	indio_dev->num_channels = ARRAY_SIZE(accel_3d_channels);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &accel_3d_info;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		NULL, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
+		goto error_free_dev_mem;
+	}
+	accel_state->common_attributes.data_ready = false;
+	ret = hid_sensor_setup_trigger(indio_dev, name,
+					&accel_state->common_attributes);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "trigger setup failed\n");
+		goto error_unreg_buffer_funcs;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "device register failed\n");
+		goto error_remove_trigger;
+	}
+
+	accel_state->callbacks.send_event = accel_3d_proc_event;
+	accel_state->callbacks.capture_sample = accel_3d_capture_sample;
+	accel_state->callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D,
+					&accel_state->callbacks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "callback reg failed\n");
+		goto error_iio_unreg;
+	}
+
+	return ret;
+
+error_iio_unreg:
+	iio_device_unregister(indio_dev);
+error_remove_trigger:
+	hid_sensor_remove_trigger(indio_dev);
+error_unreg_buffer_funcs:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_free_dev_mem:
+	kfree(indio_dev->channels);
+error_free_dev:
+	iio_device_free(indio_dev);
+error_ret:
+	return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int __devinit hid_accel_3d_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
+	iio_device_unregister(indio_dev);
+	hid_sensor_remove_trigger(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	kfree(indio_dev->channels);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver hid_accel_3d_platform_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= hid_accel_3d_probe,
+	.remove		= hid_accel_3d_remove,
+};
+module_platform_driver(hid_accel_3d_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor Accel 3D");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 8a78b4f3ef5..49275812033 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -3,6 +3,11 @@
 #
 menu "Analog to digital converters"
 
+config AD_SIGMA_DELTA
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
 config AD7266
 	tristate "Analog Devices AD7265/AD7266 ADC driver"
 	depends on SPI_MASTER
@@ -13,6 +18,33 @@ config AD7266
 	  Say yes here to build support for Analog Devices AD7265 and AD7266
 	  ADCs.
 
+config AD7791
+	tristate "Analog Devices AD7791 ADC driver"
+	depends on SPI
+	select AD_SIGMA_DELTA
+	help
+	  Say yes here to build support for Analog Devices AD7787, AD7788, AD7789,
+	  AD7790 and AD7791 SPI analog to digital converters (ADC). If unsure, say
+	  N (but it is safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad7791.
+
+config AD7476
+	tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
+	  AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
+	  AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7476.
+
 config AT91_ADC
 	tristate "Atmel AT91 ADC"
 	depends on ARCH_AT91
@@ -22,4 +54,10 @@ config AT91_ADC
 	help
 	  Say yes here to build support for Atmel AT91 ADC.
 
+config LP8788_ADC
+	bool "LP8788 ADC driver"
+	depends on MFD_LP8788
+	help
+	  Say yes here to build support for TI LP8788 ADC.
+
 endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 52eec254c38..900995d5e17 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -2,5 +2,9 @@
 # Makefile for IIO ADC drivers
 #
 
+obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
 obj-$(CONFIG_AD7266) += ad7266.o
+obj-$(CONFIG_AD7476) += ad7476.o
+obj-$(CONFIG_AD7791) += ad7791.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index 5c3f1ba5a06..b11f214779a 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -99,7 +99,7 @@ static irqreturn_t ad7266_trigger_handler(int irq, void *p)
 	if (ret == 0) {
 		if (indio_dev->scan_timestamp)
 			((s64 *)st->data)[1] = pf->timestamp;
-		iio_push_to_buffer(buffer, (u8 *)st->data, pf->timestamp);
+		iio_push_to_buffer(buffer, (u8 *)st->data);
 	}
 
 	iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
new file mode 100644
index 00000000000..7f2f45a0a48
--- /dev/null
+++ b/drivers/iio/adc/ad7476.c
@@ -0,0 +1,332 @@
+/*
+ * AD7466/7/8 AD7476/5/7/8 (A) SPI ADC driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define RES_MASK(bits)	((1 << (bits)) - 1)
+
+struct ad7476_state;
+
+struct ad7476_chip_info {
+	unsigned int			int_vref_uv;
+	struct iio_chan_spec		channel[2];
+	void (*reset)(struct ad7476_state *);
+};
+
+struct ad7476_state {
+	struct spi_device		*spi;
+	const struct ad7476_chip_info	*chip_info;
+	struct regulator		*reg;
+	struct spi_transfer		xfer;
+	struct spi_message		msg;
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 * Make the buffer large enough for one 16 bit sample and one 64 bit
+	 * aligned 64 bit timestamp.
+	 */
+	unsigned char data[ALIGN(2, sizeof(s64)) + sizeof(s64)]
+			____cacheline_aligned;
+};
+
+enum ad7476_supported_device_ids {
+	ID_AD7091R,
+	ID_AD7276,
+	ID_AD7277,
+	ID_AD7278,
+	ID_AD7466,
+	ID_AD7467,
+	ID_AD7468,
+	ID_AD7495,
+	ID_AD7940,
+};
+
+static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ad7476_state *st = iio_priv(indio_dev);
+	s64 time_ns;
+	int b_sent;
+
+	b_sent = spi_sync(st->spi, &st->msg);
+	if (b_sent < 0)
+		goto done;
+
+	time_ns = iio_get_time_ns();
+
+	if (indio_dev->scan_timestamp)
+		((s64 *)st->data)[1] = time_ns;
+
+	iio_push_to_buffer(indio_dev->buffer, st->data);
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static void ad7091_reset(struct ad7476_state *st)
+{
+	/* Any transfers with 8 scl cycles will reset the device */
+	spi_read(st->spi, st->data, 1);
+}
+
+static int ad7476_scan_direct(struct ad7476_state *st)
+{
+	int ret;
+
+	ret = spi_sync(st->spi, &st->msg);
+	if (ret)
+		return ret;
+
+	return be16_to_cpup((__be16 *)st->data);
+}
+
+static int ad7476_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	int ret;
+	struct ad7476_state *st = iio_priv(indio_dev);
+	int scale_uv;
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&indio_dev->mlock);
+		if (iio_buffer_enabled(indio_dev))
+			ret = -EBUSY;
+		else
+			ret = ad7476_scan_direct(st);
+		mutex_unlock(&indio_dev->mlock);
+
+		if (ret < 0)
+			return ret;
+		*val = (ret >> st->chip_info->channel[0].scan_type.shift) &
+			RES_MASK(st->chip_info->channel[0].scan_type.realbits);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (!st->chip_info->int_vref_uv) {
+			scale_uv = regulator_get_voltage(st->reg);
+			if (scale_uv < 0)
+				return scale_uv;
+		} else {
+			scale_uv = st->chip_info->int_vref_uv;
+		}
+		scale_uv >>= chan->scan_type.realbits;
+		*val =  scale_uv / 1000;
+		*val2 = (scale_uv % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+#define _AD7476_CHAN(bits, _shift, _info_mask)			\
+	{							\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.info_mask = _info_mask |				\
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = (bits),				\
+		.storagebits = 16,				\
+		.shift = (_shift),				\
+		.endianness = IIO_BE,				\
+	},							\
+}
+
+#define AD7476_CHAN(bits) _AD7476_CHAN((bits), 13 - (bits), \
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT)
+#define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT)
+#define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0)
+
+static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
+	[ID_AD7091R] = {
+		.channel[0] = AD7091R_CHAN(12),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+		.reset = ad7091_reset,
+	},
+	[ID_AD7276] = {
+		.channel[0] = AD7940_CHAN(12),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	},
+	[ID_AD7277] = {
+		.channel[0] = AD7940_CHAN(10),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	},
+	[ID_AD7278] = {
+		.channel[0] = AD7940_CHAN(8),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	},
+	[ID_AD7466] = {
+		.channel[0] = AD7476_CHAN(12),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	},
+	[ID_AD7467] = {
+		.channel[0] = AD7476_CHAN(10),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	},
+	[ID_AD7468] = {
+		.channel[0] = AD7476_CHAN(8),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	},
+	[ID_AD7495] = {
+		.channel[0] = AD7476_CHAN(12),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+		.int_vref_uv = 2500000,
+	},
+	[ID_AD7940] = {
+		.channel[0] = AD7940_CHAN(14),
+		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+	},
+};
+
+static const struct iio_info ad7476_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &ad7476_read_raw,
+};
+
+static int __devinit ad7476_probe(struct spi_device *spi)
+{
+	struct ad7476_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	st = iio_priv(indio_dev);
+	st->chip_info =
+		&ad7476_chip_info_tbl[spi_get_device_id(spi)->driver_data];
+
+	st->reg = regulator_get(&spi->dev, "vcc");
+	if (IS_ERR(st->reg)) {
+		ret = PTR_ERR(st->reg);
+		goto error_free_dev;
+	}
+
+	ret = regulator_enable(st->reg);
+	if (ret)
+		goto error_put_reg;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	st->spi = spi;
+
+	/* Establish that the iio_dev is a child of the spi device */
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = st->chip_info->channel;
+	indio_dev->num_channels = 2;
+	indio_dev->info = &ad7476_info;
+	/* Setup default message */
+
+	st->xfer.rx_buf = &st->data;
+	st->xfer.len = st->chip_info->channel[0].scan_type.storagebits / 8;
+
+	spi_message_init(&st->msg);
+	spi_message_add_tail(&st->xfer, &st->msg);
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+			&ad7476_trigger_handler, NULL);
+	if (ret)
+		goto error_disable_reg;
+
+	if (st->chip_info->reset)
+		st->chip_info->reset(st);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_ring_unregister;
+	return 0;
+
+error_ring_unregister:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_disable_reg:
+	regulator_disable(st->reg);
+error_put_reg:
+	regulator_put(st->reg);
+error_free_dev:
+	iio_device_free(indio_dev);
+
+error_ret:
+	return ret;
+}
+
+static int __devexit ad7476_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ad7476_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	regulator_disable(st->reg);
+	regulator_put(st->reg);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id ad7476_id[] = {
+	{"ad7091r", ID_AD7091R},
+	{"ad7273", ID_AD7277},
+	{"ad7274", ID_AD7276},
+	{"ad7276", ID_AD7276},
+	{"ad7277", ID_AD7277},
+	{"ad7278", ID_AD7278},
+	{"ad7466", ID_AD7466},
+	{"ad7467", ID_AD7467},
+	{"ad7468", ID_AD7468},
+	{"ad7475", ID_AD7466},
+	{"ad7476", ID_AD7466},
+	{"ad7476a", ID_AD7466},
+	{"ad7477", ID_AD7467},
+	{"ad7477a", ID_AD7467},
+	{"ad7478", ID_AD7468},
+	{"ad7478a", ID_AD7468},
+	{"ad7495", ID_AD7495},
+	{"ad7910", ID_AD7467},
+	{"ad7920", ID_AD7466},
+	{"ad7940", ID_AD7940},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7476_id);
+
+static struct spi_driver ad7476_driver = {
+	.driver = {
+		.name	= "ad7476",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad7476_probe,
+	.remove		= __devexit_p(ad7476_remove),
+	.id_table	= ad7476_id,
+};
+module_spi_driver(ad7476_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD7476 and similar 1-channel ADCs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7791.c b/drivers/iio/adc/ad7791.c
new file mode 100644
index 00000000000..e93740843b2
--- /dev/null
+++ b/drivers/iio/adc/ad7791.c
@@ -0,0 +1,460 @@
+/*
+ * AD7787/AD7788/AD7789/AD7790/AD7791 SPI ADC driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+#include <linux/platform_data/ad7791.h>
+
+#define AD7791_REG_COMM			0x0 /* For writes */
+#define AD7791_REG_STATUS		0x0 /* For reads */
+#define AD7791_REG_MODE			0x1
+#define AD7791_REG_FILTER		0x2
+#define AD7791_REG_DATA			0x3
+
+#define AD7791_MODE_CONTINUOUS		0x00
+#define AD7791_MODE_SINGLE		0x02
+#define AD7791_MODE_POWERDOWN		0x03
+
+#define AD7791_CH_AIN1P_AIN1N		0x00
+#define AD7791_CH_AIN2			0x01
+#define AD7791_CH_AIN1N_AIN1N		0x02
+#define AD7791_CH_AVDD_MONITOR		0x03
+
+#define AD7791_FILTER_CLK_DIV_1		(0x0 << 4)
+#define AD7791_FILTER_CLK_DIV_2		(0x1 << 4)
+#define AD7791_FILTER_CLK_DIV_4		(0x2 << 4)
+#define AD7791_FILTER_CLK_DIV_8		(0x3 << 4)
+#define AD7791_FILTER_CLK_MASK		(0x3 << 4)
+#define AD7791_FILTER_RATE_120		0x0
+#define AD7791_FILTER_RATE_100		0x1
+#define AD7791_FILTER_RATE_33_3		0x2
+#define AD7791_FILTER_RATE_20		0x3
+#define AD7791_FILTER_RATE_16_6		0x4
+#define AD7791_FILTER_RATE_16_7		0x5
+#define AD7791_FILTER_RATE_13_3		0x6
+#define AD7791_FILTER_RATE_9_5		0x7
+#define AD7791_FILTER_RATE_MASK		0x7
+
+#define AD7791_MODE_BUFFER		BIT(1)
+#define AD7791_MODE_UNIPOLAR		BIT(2)
+#define AD7791_MODE_BURNOUT		BIT(3)
+#define AD7791_MODE_SEL_MASK		(0x3 << 6)
+#define AD7791_MODE_SEL(x)		((x) << 6)
+
+#define DECLARE_AD7787_CHANNELS(name, bits, storagebits) \
+const struct iio_chan_spec name[] = { \
+	AD_SD_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
+		(bits), (storagebits), 0), \
+	AD_SD_CHANNEL(1, 1, AD7791_CH_AIN2, (bits), (storagebits), 0), \
+	AD_SD_SHORTED_CHANNEL(2, 0, AD7791_CH_AIN1N_AIN1N, \
+		(bits), (storagebits), 0), \
+	AD_SD_SUPPLY_CHANNEL(3, 2, AD7791_CH_AVDD_MONITOR,  \
+		(bits), (storagebits), 0), \
+	IIO_CHAN_SOFT_TIMESTAMP(4), \
+}
+
+#define DECLARE_AD7791_CHANNELS(name, bits, storagebits) \
+const struct iio_chan_spec name[] = { \
+	AD_SD_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
+		(bits), (storagebits), 0), \
+	AD_SD_SHORTED_CHANNEL(1, 0, AD7791_CH_AIN1N_AIN1N, \
+		(bits), (storagebits), 0), \
+	AD_SD_SUPPLY_CHANNEL(2, 1, AD7791_CH_AVDD_MONITOR, \
+		(bits), (storagebits), 0), \
+	IIO_CHAN_SOFT_TIMESTAMP(3), \
+}
+
+static DECLARE_AD7787_CHANNELS(ad7787_channels, 24, 32);
+static DECLARE_AD7791_CHANNELS(ad7790_channels, 16, 16);
+static DECLARE_AD7791_CHANNELS(ad7791_channels, 24, 32);
+
+enum {
+	AD7787,
+	AD7788,
+	AD7789,
+	AD7790,
+	AD7791,
+};
+
+enum ad7791_chip_info_flags {
+	AD7791_FLAG_HAS_FILTER		= (1 << 0),
+	AD7791_FLAG_HAS_BUFFER		= (1 << 1),
+	AD7791_FLAG_HAS_UNIPOLAR	= (1 << 2),
+	AD7791_FLAG_HAS_BURNOUT		= (1 << 3),
+};
+
+struct ad7791_chip_info {
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+	enum ad7791_chip_info_flags flags;
+};
+
+static const struct ad7791_chip_info ad7791_chip_infos[] = {
+	[AD7787] = {
+		.channels = ad7787_channels,
+		.num_channels = ARRAY_SIZE(ad7787_channels),
+		.flags = AD7791_FLAG_HAS_FILTER | AD7791_FLAG_HAS_BUFFER |
+			AD7791_FLAG_HAS_UNIPOLAR | AD7791_FLAG_HAS_BURNOUT,
+	},
+	[AD7788] = {
+		.channels = ad7790_channels,
+		.num_channels = ARRAY_SIZE(ad7790_channels),
+		.flags = AD7791_FLAG_HAS_UNIPOLAR,
+	},
+	[AD7789] = {
+		.channels = ad7791_channels,
+		.num_channels = ARRAY_SIZE(ad7791_channels),
+		.flags = AD7791_FLAG_HAS_UNIPOLAR,
+	},
+	[AD7790] = {
+		.channels = ad7790_channels,
+		.num_channels = ARRAY_SIZE(ad7790_channels),
+		.flags = AD7791_FLAG_HAS_FILTER | AD7791_FLAG_HAS_BUFFER |
+			AD7791_FLAG_HAS_BURNOUT,
+	},
+	[AD7791] = {
+		.channels = ad7791_channels,
+		.num_channels = ARRAY_SIZE(ad7791_channels),
+		.flags = AD7791_FLAG_HAS_FILTER | AD7791_FLAG_HAS_BUFFER |
+			AD7791_FLAG_HAS_UNIPOLAR | AD7791_FLAG_HAS_BURNOUT,
+	},
+};
+
+struct ad7791_state {
+	struct ad_sigma_delta sd;
+	uint8_t mode;
+	uint8_t filter;
+
+	struct regulator *reg;
+	const struct ad7791_chip_info *info;
+};
+
+static struct ad7791_state *ad_sigma_delta_to_ad7791(struct ad_sigma_delta *sd)
+{
+	return container_of(sd, struct ad7791_state, sd);
+}
+
+static int ad7791_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
+{
+	ad_sd_set_comm(sd, channel);
+
+	return 0;
+}
+
+static int ad7791_set_mode(struct ad_sigma_delta *sd,
+	enum ad_sigma_delta_mode mode)
+{
+	struct ad7791_state *st = ad_sigma_delta_to_ad7791(sd);
+
+	switch (mode) {
+	case AD_SD_MODE_CONTINUOUS:
+		mode = AD7791_MODE_CONTINUOUS;
+		break;
+	case AD_SD_MODE_SINGLE:
+		mode = AD7791_MODE_SINGLE;
+		break;
+	case AD_SD_MODE_IDLE:
+	case AD_SD_MODE_POWERDOWN:
+		mode = AD7791_MODE_POWERDOWN;
+		break;
+	}
+
+	st->mode &= ~AD7791_MODE_SEL_MASK;
+	st->mode |= AD7791_MODE_SEL(mode);
+
+	return ad_sd_write_reg(sd, AD7791_REG_MODE, sizeof(st->mode), st->mode);
+}
+
+static const struct ad_sigma_delta_info ad7791_sigma_delta_info = {
+	.set_channel = ad7791_set_channel,
+	.set_mode = ad7791_set_mode,
+	.has_registers = true,
+	.addr_shift = 4,
+	.read_mask = BIT(3),
+};
+
+static int ad7791_read_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *val, int *val2, long info)
+{
+	struct ad7791_state *st = iio_priv(indio_dev);
+	bool unipolar = !!(st->mode & AD7791_MODE_UNIPOLAR);
+	unsigned long long scale_pv;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
+	case IIO_CHAN_INFO_OFFSET:
+		/**
+		 * Unipolar: 0 to VREF
+		 * Bipolar -VREF to VREF
+		 **/
+		if (unipolar)
+			*val = 0;
+		else
+			*val = -(1 << (chan->scan_type.realbits - 1));
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/* The monitor channel uses an internal reference. */
+		if (chan->address == AD7791_CH_AVDD_MONITOR) {
+			scale_pv = 5850000000000ULL;
+		} else {
+			int voltage_uv;
+
+			voltage_uv = regulator_get_voltage(st->reg);
+			if (voltage_uv < 0)
+				return voltage_uv;
+			scale_pv = (unsigned long long)voltage_uv * 1000000;
+		}
+		if (unipolar)
+			scale_pv >>= chan->scan_type.realbits;
+		else
+			scale_pv >>= chan->scan_type.realbits - 1;
+		*val2 = do_div(scale_pv, 1000000000);
+		*val = scale_pv;
+
+		return IIO_VAL_INT_PLUS_NANO;
+	}
+
+	return -EINVAL;
+}
+
+static const char * const ad7791_sample_freq_avail[] = {
+	[AD7791_FILTER_RATE_120] = "120",
+	[AD7791_FILTER_RATE_100] = "100",
+	[AD7791_FILTER_RATE_33_3] = "33.3",
+	[AD7791_FILTER_RATE_20] = "20",
+	[AD7791_FILTER_RATE_16_6] = "16.6",
+	[AD7791_FILTER_RATE_16_7] = "16.7",
+	[AD7791_FILTER_RATE_13_3] = "13.3",
+	[AD7791_FILTER_RATE_9_5] = "9.5",
+};
+
+static ssize_t ad7791_read_frequency(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7791_state *st = iio_priv(indio_dev);
+	unsigned int rate = st->filter & AD7791_FILTER_RATE_MASK;
+
+	return sprintf(buf, "%s\n", ad7791_sample_freq_avail[rate]);
+}
+
+static ssize_t ad7791_write_frequency(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ad7791_state *st = iio_priv(indio_dev);
+	int i, ret;
+
+	mutex_lock(&indio_dev->mlock);
+	if (iio_buffer_enabled(indio_dev)) {
+		mutex_unlock(&indio_dev->mlock);
+		return -EBUSY;
+	}
+	mutex_unlock(&indio_dev->mlock);
+
+	ret = -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(ad7791_sample_freq_avail); i++) {
+		if (sysfs_streq(ad7791_sample_freq_avail[i], buf)) {
+
+			mutex_lock(&indio_dev->mlock);
+			st->filter &= ~AD7791_FILTER_RATE_MASK;
+			st->filter |= i;
+			ad_sd_write_reg(&st->sd, AD7791_REG_FILTER,
+					 sizeof(st->filter), st->filter);
+			mutex_unlock(&indio_dev->mlock);
+			ret = 0;
+			break;
+		}
+	}
+
+	return ret ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+		ad7791_read_frequency,
+		ad7791_write_frequency);
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("120 100 33.3 20 16.7 16.6 13.3 9.5");
+
+static struct attribute *ad7791_attributes[] = {
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group ad7791_attribute_group = {
+	.attrs = ad7791_attributes,
+};
+
+static const struct iio_info ad7791_info = {
+	.read_raw = &ad7791_read_raw,
+	.attrs = &ad7791_attribute_group,
+	.validate_trigger = ad_sd_validate_trigger,
+	.driver_module = THIS_MODULE,
+};
+
+static const struct iio_info ad7791_no_filter_info = {
+	.read_raw = &ad7791_read_raw,
+	.validate_trigger = ad_sd_validate_trigger,
+	.driver_module = THIS_MODULE,
+};
+
+static int __devinit ad7791_setup(struct ad7791_state *st,
+	struct ad7791_platform_data *pdata)
+{
+	/* Set to poweron-reset default values */
+	st->mode = AD7791_MODE_BUFFER;
+	st->filter = AD7791_FILTER_RATE_16_6;
+
+	if (!pdata)
+		return 0;
+
+	if ((st->info->flags & AD7791_FLAG_HAS_BUFFER) && !pdata->buffered)
+		st->mode &= ~AD7791_MODE_BUFFER;
+
+	if ((st->info->flags & AD7791_FLAG_HAS_BURNOUT) &&
+		pdata->burnout_current)
+		st->mode |= AD7791_MODE_BURNOUT;
+
+	if ((st->info->flags & AD7791_FLAG_HAS_UNIPOLAR) && pdata->unipolar)
+		st->mode |= AD7791_MODE_UNIPOLAR;
+
+	return ad_sd_write_reg(&st->sd, AD7791_REG_MODE, sizeof(st->mode),
+		st->mode);
+}
+
+static int __devinit ad7791_probe(struct spi_device *spi)
+{
+	struct ad7791_platform_data *pdata = spi->dev.platform_data;
+	struct iio_dev *indio_dev;
+	struct ad7791_state *st;
+	int ret;
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "Missing IRQ.\n");
+		return -ENXIO;
+	}
+
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->reg = regulator_get(&spi->dev, "refin");
+	if (IS_ERR(st->reg)) {
+		ret = PTR_ERR(st->reg);
+		goto err_iio_free;
+	}
+
+	ret = regulator_enable(st->reg);
+	if (ret)
+		goto error_put_reg;
+
+	st->info = &ad7791_chip_infos[spi_get_device_id(spi)->driver_data];
+	ad_sd_init(&st->sd, indio_dev, spi, &ad7791_sigma_delta_info);
+
+	spi_set_drvdata(spi, indio_dev);
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = st->info->channels;
+	indio_dev->num_channels = st->info->num_channels;
+	if (st->info->flags & AD7791_FLAG_HAS_FILTER)
+		indio_dev->info = &ad7791_info;
+	else
+		indio_dev->info = &ad7791_no_filter_info;
+
+	ret = ad_sd_setup_buffer_and_trigger(indio_dev);
+	if (ret)
+		goto error_disable_reg;
+
+	ret = ad7791_setup(st, pdata);
+	if (ret)
+		goto error_remove_trigger;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_remove_trigger;
+
+	return 0;
+
+error_remove_trigger:
+	ad_sd_cleanup_buffer_and_trigger(indio_dev);
+error_disable_reg:
+	regulator_disable(st->reg);
+error_put_reg:
+	regulator_put(st->reg);
+err_iio_free:
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int __devexit ad7791_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ad7791_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	ad_sd_cleanup_buffer_and_trigger(indio_dev);
+
+	regulator_disable(st->reg);
+	regulator_put(st->reg);
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id ad7791_spi_ids[] = {
+	{ "ad7787", AD7787 },
+	{ "ad7788", AD7788 },
+	{ "ad7789", AD7789 },
+	{ "ad7790", AD7790 },
+	{ "ad7791", AD7791 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7791_spi_ids);
+
+static struct spi_driver ad7791_driver = {
+	.driver = {
+		.name	= "ad7791",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad7791_probe,
+	.remove		= __devexit_p(ad7791_remove),
+	.id_table	= ad7791_spi_ids,
+};
+module_spi_driver(ad7791_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Device AD7787/AD7788/AD7789/AD7790/AD7791 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
new file mode 100644
index 00000000000..67baa1363d7
--- /dev/null
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -0,0 +1,558 @@
+/*
+ * Support code for Analog Devices Sigma-Delta ADCs
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+#include <asm/unaligned.h>
+
+
+#define AD_SD_COMM_CHAN_MASK	0x3
+
+#define AD_SD_REG_COMM		0x00
+#define AD_SD_REG_DATA		0x03
+
+/**
+ * ad_sd_set_comm() - Set communications register
+ *
+ * @sigma_delta: The sigma delta device
+ * @comm: New value for the communications register
+ */
+void ad_sd_set_comm(struct ad_sigma_delta *sigma_delta, uint8_t comm)
+{
+	/* Some variants use the lower two bits of the communications register
+	 * to select the channel */
+	sigma_delta->comm = comm & AD_SD_COMM_CHAN_MASK;
+}
+EXPORT_SYMBOL_GPL(ad_sd_set_comm);
+
+/**
+ * ad_sd_write_reg() - Write a register
+ *
+ * @sigma_delta: The sigma delta device
+ * @reg: Address of the register
+ * @size: Size of the register (0-3)
+ * @val: Value to write to the register
+ *
+ * Returns 0 on success, an error code otherwise.
+ **/
+int ad_sd_write_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg,
+	unsigned int size, unsigned int val)
+{
+	uint8_t *data = sigma_delta->data;
+	struct spi_transfer t = {
+		.tx_buf		= data,
+		.len		= size + 1,
+		.cs_change	= sigma_delta->bus_locked,
+	};
+	struct spi_message m;
+	int ret;
+
+	data[0] = (reg << sigma_delta->info->addr_shift) | sigma_delta->comm;
+
+	switch (size) {
+	case 3:
+		data[1] = val >> 16;
+		data[2] = val >> 8;
+		data[3] = val;
+		break;
+	case 2:
+		put_unaligned_be16(val, &data[1]);
+		break;
+	case 1:
+		data[1] = val;
+		break;
+	case 0:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+
+	if (sigma_delta->bus_locked)
+		ret = spi_sync_locked(sigma_delta->spi, &m);
+	else
+		ret = spi_sync(sigma_delta->spi, &m);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ad_sd_write_reg);
+
+static int ad_sd_read_reg_raw(struct ad_sigma_delta *sigma_delta,
+	unsigned int reg, unsigned int size, uint8_t *val)
+{
+	uint8_t *data = sigma_delta->data;
+	int ret;
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = data,
+			.len = 1,
+		}, {
+			.rx_buf = val,
+			.len = size,
+			.cs_change = sigma_delta->bus_locked,
+		},
+	};
+	struct spi_message m;
+
+	spi_message_init(&m);
+
+	if (sigma_delta->info->has_registers) {
+		data[0] = reg << sigma_delta->info->addr_shift;
+		data[0] |= sigma_delta->info->read_mask;
+		spi_message_add_tail(&t[0], &m);
+	}
+	spi_message_add_tail(&t[1], &m);
+
+	if (sigma_delta->bus_locked)
+		ret = spi_sync_locked(sigma_delta->spi, &m);
+	else
+		ret = spi_sync(sigma_delta->spi, &m);
+
+	return ret;
+}
+
+/**
+ * ad_sd_read_reg() - Read a register
+ *
+ * @sigma_delta: The sigma delta device
+ * @reg: Address of the register
+ * @size: Size of the register (1-4)
+ * @val: Read value
+ *
+ * Returns 0 on success, an error code otherwise.
+ **/
+int ad_sd_read_reg(struct ad_sigma_delta *sigma_delta,
+	unsigned int reg, unsigned int size, unsigned int *val)
+{
+	int ret;
+
+	ret = ad_sd_read_reg_raw(sigma_delta, reg, size, sigma_delta->data);
+	if (ret < 0)
+		goto out;
+
+	switch (size) {
+	case 4:
+		*val = get_unaligned_be32(sigma_delta->data);
+		break;
+	case 3:
+		*val = (sigma_delta->data[0] << 16) |
+			(sigma_delta->data[1] << 8) |
+			sigma_delta->data[2];
+		break;
+	case 2:
+		*val = get_unaligned_be16(sigma_delta->data);
+		break;
+	case 1:
+		*val = sigma_delta->data[0];
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ad_sd_read_reg);
+
+static int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
+	unsigned int mode, unsigned int channel)
+{
+	int ret;
+
+	ret = ad_sigma_delta_set_channel(sigma_delta, channel);
+	if (ret)
+		return ret;
+
+	spi_bus_lock(sigma_delta->spi->master);
+	sigma_delta->bus_locked = true;
+	INIT_COMPLETION(sigma_delta->completion);
+
+	ret = ad_sigma_delta_set_mode(sigma_delta, mode);
+	if (ret < 0)
+		goto out;
+
+	sigma_delta->irq_dis = false;
+	enable_irq(sigma_delta->spi->irq);
+	ret = wait_for_completion_timeout(&sigma_delta->completion, 2*HZ);
+	if (ret == 0) {
+		sigma_delta->irq_dis = true;
+		disable_irq_nosync(sigma_delta->spi->irq);
+		ret = -EIO;
+	} else {
+		ret = 0;
+	}
+out:
+	sigma_delta->bus_locked = false;
+	spi_bus_unlock(sigma_delta->spi->master);
+	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
+
+	return ret;
+}
+
+/**
+ * ad_sd_calibrate_all() - Performs channel calibration
+ * @sigma_delta: The sigma delta device
+ * @cb: Array of channels and calibration type to perform
+ * @n: Number of items in cb
+ *
+ * Returns 0 on success, an error code otherwise.
+ **/
+int ad_sd_calibrate_all(struct ad_sigma_delta *sigma_delta,
+	const struct ad_sd_calib_data *cb, unsigned int n)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < n; i++) {
+		ret = ad_sd_calibrate(sigma_delta, cb[i].mode, cb[i].channel);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ad_sd_calibrate_all);
+
+/**
+ * ad_sigma_delta_single_conversion() - Performs a single data conversion
+ * @indio_dev: The IIO device
+ * @chan: The conversion is done for this channel
+ * @val: Pointer to the location where to store the read value
+ *
+ * Returns: 0 on success, an error value otherwise.
+ */
+int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *val)
+{
+	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
+	unsigned int sample, raw_sample;
+	int ret = 0;
+
+	if (iio_buffer_enabled(indio_dev))
+		return -EBUSY;
+
+	mutex_lock(&indio_dev->mlock);
+	ad_sigma_delta_set_channel(sigma_delta, chan->address);
+
+	spi_bus_lock(sigma_delta->spi->master);
+	sigma_delta->bus_locked = true;
+	INIT_COMPLETION(sigma_delta->completion);
+
+	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_SINGLE);
+
+	sigma_delta->irq_dis = false;
+	enable_irq(sigma_delta->spi->irq);
+	ret = wait_for_completion_interruptible_timeout(
+			&sigma_delta->completion, HZ);
+
+	sigma_delta->bus_locked = false;
+	spi_bus_unlock(sigma_delta->spi->master);
+
+	if (ret == 0)
+		ret = -EIO;
+	if (ret < 0)
+		goto out;
+
+	ret = ad_sd_read_reg(sigma_delta, AD_SD_REG_DATA,
+		DIV_ROUND_UP(chan->scan_type.realbits + chan->scan_type.shift, 8),
+		&raw_sample);
+
+out:
+	if (!sigma_delta->irq_dis) {
+		disable_irq_nosync(sigma_delta->spi->irq);
+		sigma_delta->irq_dis = true;
+	}
+
+	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
+	mutex_unlock(&indio_dev->mlock);
+
+	if (ret)
+		return ret;
+
+	sample = raw_sample >> chan->scan_type.shift;
+	sample &= (1 << chan->scan_type.realbits) - 1;
+	*val = sample;
+
+	ret = ad_sigma_delta_postprocess_sample(sigma_delta, raw_sample);
+	if (ret)
+		return ret;
+
+	return IIO_VAL_INT;
+}
+EXPORT_SYMBOL_GPL(ad_sigma_delta_single_conversion);
+
+static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
+	unsigned int channel;
+	int ret;
+
+	ret = iio_triggered_buffer_postenable(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	channel = find_first_bit(indio_dev->active_scan_mask,
+				 indio_dev->masklength);
+	ret = ad_sigma_delta_set_channel(sigma_delta,
+		indio_dev->channels[channel].address);
+	if (ret)
+		goto err_predisable;
+
+	spi_bus_lock(sigma_delta->spi->master);
+	sigma_delta->bus_locked = true;
+	ret = ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_CONTINUOUS);
+	if (ret)
+		goto err_unlock;
+
+	sigma_delta->irq_dis = false;
+	enable_irq(sigma_delta->spi->irq);
+
+	return 0;
+
+err_unlock:
+	spi_bus_unlock(sigma_delta->spi->master);
+err_predisable:
+
+	return ret;
+}
+
+static int ad_sd_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
+
+	INIT_COMPLETION(sigma_delta->completion);
+	wait_for_completion_timeout(&sigma_delta->completion, HZ);
+
+	if (!sigma_delta->irq_dis) {
+		disable_irq_nosync(sigma_delta->spi->irq);
+		sigma_delta->irq_dis = true;
+	}
+
+	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
+
+	sigma_delta->bus_locked = false;
+	return spi_bus_unlock(sigma_delta->spi->master);
+}
+
+static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
+	unsigned int reg_size;
+	uint8_t data[16];
+	int ret;
+
+	memset(data, 0x00, 16);
+
+	/* Guaranteed to be aligned with 8 byte boundary */
+	if (indio_dev->scan_timestamp)
+		((s64 *)data)[1] = pf->timestamp;
+
+	reg_size = indio_dev->channels[0].scan_type.realbits +
+			indio_dev->channels[0].scan_type.shift;
+	reg_size = DIV_ROUND_UP(reg_size, 8);
+
+	switch (reg_size) {
+	case 4:
+	case 2:
+	case 1:
+		ret = ad_sd_read_reg_raw(sigma_delta, AD_SD_REG_DATA,
+			reg_size, &data[0]);
+		break;
+	case 3:
+		/* We store 24 bit samples in a 32 bit word. Keep the upper
+		 * byte set to zero. */
+		ret = ad_sd_read_reg_raw(sigma_delta, AD_SD_REG_DATA,
+			reg_size, &data[1]);
+		break;
+	}
+
+	iio_push_to_buffer(indio_dev->buffer, (uint8_t *)data);
+
+	iio_trigger_notify_done(indio_dev->trig);
+	sigma_delta->irq_dis = false;
+	enable_irq(sigma_delta->spi->irq);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_buffer_setup_ops ad_sd_buffer_setup_ops = {
+	.preenable = &iio_sw_buffer_preenable,
+	.postenable = &ad_sd_buffer_postenable,
+	.predisable = &iio_triggered_buffer_predisable,
+	.postdisable = &ad_sd_buffer_postdisable,
+	.validate_scan_mask = &iio_validate_scan_mask_onehot,
+};
+
+static irqreturn_t ad_sd_data_rdy_trig_poll(int irq, void *private)
+{
+	struct ad_sigma_delta *sigma_delta = private;
+
+	complete(&sigma_delta->completion);
+	disable_irq_nosync(irq);
+	sigma_delta->irq_dis = true;
+	iio_trigger_poll(sigma_delta->trig, iio_get_time_ns());
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ad_sd_validate_trigger() - validate_trigger callback for ad_sigma_delta devices
+ * @indio_dev: The IIO device
+ * @trig: The new trigger
+ *
+ * Returns: 0 if the 'trig' matches the trigger registered by the ad_sigma_delta
+ * device, -EINVAL otherwise.
+ */
+int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig)
+{
+	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
+
+	if (sigma_delta->trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ad_sd_validate_trigger);
+
+static const struct iio_trigger_ops ad_sd_trigger_ops = {
+	.owner = THIS_MODULE,
+};
+
+static int ad_sd_probe_trigger(struct iio_dev *indio_dev)
+{
+	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	sigma_delta->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name,
+						indio_dev->id);
+	if (sigma_delta->trig == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	sigma_delta->trig->ops = &ad_sd_trigger_ops;
+	init_completion(&sigma_delta->completion);
+
+	ret = request_irq(sigma_delta->spi->irq,
+			  ad_sd_data_rdy_trig_poll,
+			  IRQF_TRIGGER_LOW,
+			  indio_dev->name,
+			  sigma_delta);
+	if (ret)
+		goto error_free_trig;
+
+	if (!sigma_delta->irq_dis) {
+		sigma_delta->irq_dis = true;
+		disable_irq_nosync(sigma_delta->spi->irq);
+	}
+	sigma_delta->trig->dev.parent = &sigma_delta->spi->dev;
+	sigma_delta->trig->private_data = sigma_delta;
+
+	ret = iio_trigger_register(sigma_delta->trig);
+	if (ret)
+		goto error_free_irq;
+
+	/* select default trigger */
+	indio_dev->trig = sigma_delta->trig;
+
+	return 0;
+
+error_free_irq:
+	free_irq(sigma_delta->spi->irq, sigma_delta);
+error_free_trig:
+	iio_trigger_free(sigma_delta->trig);
+error_ret:
+	return ret;
+}
+
+static void ad_sd_remove_trigger(struct iio_dev *indio_dev)
+{
+	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
+
+	iio_trigger_unregister(sigma_delta->trig);
+	free_irq(sigma_delta->spi->irq, sigma_delta);
+	iio_trigger_free(sigma_delta->trig);
+}
+
+/**
+ * ad_sd_setup_buffer_and_trigger() -
+ * @indio_dev: The IIO device
+ */
+int ad_sd_setup_buffer_and_trigger(struct iio_dev *indio_dev)
+{
+	int ret;
+
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+			&ad_sd_trigger_handler, &ad_sd_buffer_setup_ops);
+	if (ret)
+		return ret;
+
+	ret = ad_sd_probe_trigger(indio_dev);
+	if (ret) {
+		iio_triggered_buffer_cleanup(indio_dev);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ad_sd_setup_buffer_and_trigger);
+
+/**
+ * ad_sd_cleanup_buffer_and_trigger() -
+ * @indio_dev: The IIO device
+ */
+void ad_sd_cleanup_buffer_and_trigger(struct iio_dev *indio_dev)
+{
+	ad_sd_remove_trigger(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL_GPL(ad_sd_cleanup_buffer_and_trigger);
+
+/**
+ * ad_sd_init() - Initializes a ad_sigma_delta struct
+ * @sigma_delta: The ad_sigma_delta device
+ * @indio_dev: The IIO device which the Sigma Delta device is used for
+ * @spi: The SPI device for the ad_sigma_delta device
+ * @info: Device specific callbacks and options
+ *
+ * This function needs to be called before any other operations are performed on
+ * the ad_sigma_delta struct.
+ */
+int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev,
+	struct spi_device *spi, const struct ad_sigma_delta_info *info)
+{
+	sigma_delta->spi = spi;
+	sigma_delta->info = info;
+	iio_device_set_drvdata(indio_dev, sigma_delta);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ad_sd_init);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices Sigma-Delta ADCs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 3bd5540238a..3ed94bf8059 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -82,7 +82,7 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
 		*timestamp = pf->timestamp;
 	}
 
-	buffer->access->store_to(buffer, (u8 *)st->buffer, pf->timestamp);
+	buffer->access->store_to(buffer, (u8 *)st->buffer);
 
 	iio_trigger_notify_done(idev->trig);
 	st->irq_enabled = true;
@@ -545,13 +545,6 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
 		goto error_free_device;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "No resource defined\n");
-		ret = -ENXIO;
-		goto error_ret;
-	}
-
 	platform_set_drvdata(pdev, idev);
 
 	idev->dev.parent = &pdev->dev;
@@ -566,18 +559,12 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
 		goto error_free_device;
 	}
 
-	if (!request_mem_region(res->start, resource_size(res),
-				"AT91 adc registers")) {
-		dev_err(&pdev->dev, "Resources are unavailable.\n");
-		ret = -EBUSY;
-		goto error_free_device;
-	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	st->reg_base = ioremap(res->start, resource_size(res));
+	st->reg_base = devm_request_and_ioremap(&pdev->dev, res);
 	if (!st->reg_base) {
-		dev_err(&pdev->dev, "Failed to map registers.\n");
 		ret = -ENOMEM;
-		goto error_release_mem;
+		goto error_free_device;
 	}
 
 	/*
@@ -592,45 +579,35 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
 			  idev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
-		goto error_unmap_reg;
+		goto error_free_device;
 	}
 
-	st->clk = clk_get(&pdev->dev, "adc_clk");
+	st->clk = devm_clk_get(&pdev->dev, "adc_clk");
 	if (IS_ERR(st->clk)) {
 		dev_err(&pdev->dev, "Failed to get the clock.\n");
 		ret = PTR_ERR(st->clk);
 		goto error_free_irq;
 	}
 
-	ret = clk_prepare(st->clk);
+	ret = clk_prepare_enable(st->clk);
 	if (ret) {
-		dev_err(&pdev->dev, "Could not prepare the clock.\n");
-		goto error_free_clk;
-	}
-
-	ret = clk_enable(st->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Could not enable the clock.\n");
-		goto error_unprepare_clk;
+		dev_err(&pdev->dev,
+			"Could not prepare or enable the clock.\n");
+		goto error_free_irq;
 	}
 
-	st->adc_clk = clk_get(&pdev->dev, "adc_op_clk");
+	st->adc_clk = devm_clk_get(&pdev->dev, "adc_op_clk");
 	if (IS_ERR(st->adc_clk)) {
 		dev_err(&pdev->dev, "Failed to get the ADC clock.\n");
 		ret = PTR_ERR(st->adc_clk);
 		goto error_disable_clk;
 	}
 
-	ret = clk_prepare(st->adc_clk);
+	ret = clk_prepare_enable(st->adc_clk);
 	if (ret) {
-		dev_err(&pdev->dev, "Could not prepare the ADC clock.\n");
-		goto error_free_adc_clk;
-	}
-
-	ret = clk_enable(st->adc_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Could not enable the ADC clock.\n");
-		goto error_unprepare_adc_clk;
+		dev_err(&pdev->dev,
+			"Could not prepare or enable the ADC clock.\n");
+		goto error_disable_clk;
 	}
 
 	/*
@@ -694,23 +671,11 @@ error_remove_triggers:
 error_unregister_buffer:
 	at91_adc_buffer_remove(idev);
 error_disable_adc_clk:
-	clk_disable(st->adc_clk);
-error_unprepare_adc_clk:
-	clk_unprepare(st->adc_clk);
-error_free_adc_clk:
-	clk_put(st->adc_clk);
+	clk_disable_unprepare(st->adc_clk);
 error_disable_clk:
-	clk_disable(st->clk);
-error_unprepare_clk:
-	clk_unprepare(st->clk);
-error_free_clk:
-	clk_put(st->clk);
+	clk_disable_unprepare(st->clk);
 error_free_irq:
 	free_irq(st->irq, idev);
-error_unmap_reg:
-	iounmap(st->reg_base);
-error_release_mem:
-	release_mem_region(res->start, resource_size(res));
 error_free_device:
 	iio_device_free(idev);
 error_ret:
@@ -720,20 +685,14 @@ error_ret:
 static int __devexit at91_adc_remove(struct platform_device *pdev)
 {
 	struct iio_dev *idev = platform_get_drvdata(pdev);
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct at91_adc_state *st = iio_priv(idev);
 
 	iio_device_unregister(idev);
 	at91_adc_trigger_remove(idev);
 	at91_adc_buffer_remove(idev);
 	clk_disable_unprepare(st->adc_clk);
-	clk_put(st->adc_clk);
-	clk_disable(st->clk);
-	clk_unprepare(st->clk);
-	clk_put(st->clk);
+	clk_disable_unprepare(st->clk);
 	free_irq(st->irq, idev);
-	iounmap(st->reg_base);
-	release_mem_region(res->start, resource_size(res));
 	iio_device_free(idev);
 
 	return 0;
diff --git a/drivers/iio/adc/lp8788_adc.c b/drivers/iio/adc/lp8788_adc.c
new file mode 100644
index 00000000000..a93aaf0bb84
--- /dev/null
+++ b/drivers/iio/adc/lp8788_adc.c
@@ -0,0 +1,264 @@
+/*
+ * TI LP8788 MFD - ADC driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/machine.h>
+#include <linux/mfd/lp8788.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* register address */
+#define LP8788_ADC_CONF			0x60
+#define LP8788_ADC_RAW			0x61
+#define LP8788_ADC_DONE			0x63
+
+#define ADC_CONV_START			1
+
+struct lp8788_adc {
+	struct lp8788 *lp;
+	struct iio_map *map;
+	struct mutex lock;
+};
+
+static const int lp8788_scale[LPADC_MAX] = {
+	[LPADC_VBATT_5P5] = 1343101,
+	[LPADC_VIN_CHG]   = 3052503,
+	[LPADC_IBATT]     = 610500,
+	[LPADC_IC_TEMP]   = 61050,
+	[LPADC_VBATT_6P0] = 1465201,
+	[LPADC_VBATT_5P0] = 1221001,
+	[LPADC_ADC1]      = 610500,
+	[LPADC_ADC2]      = 610500,
+	[LPADC_VDD]       = 1025641,
+	[LPADC_VCOIN]     = 757020,
+	[LPADC_ADC3]      = 610500,
+	[LPADC_ADC4]      = 610500,
+};
+
+static int lp8788_get_adc_result(struct lp8788_adc *adc, enum lp8788_adc_id id,
+				int *val)
+{
+	unsigned int msb;
+	unsigned int lsb;
+	unsigned int result;
+	u8 data;
+	u8 rawdata[2];
+	int size = ARRAY_SIZE(rawdata);
+	int retry = 5;
+	int ret;
+
+	data = (id << 1) | ADC_CONV_START;
+	ret = lp8788_write_byte(adc->lp, LP8788_ADC_CONF, data);
+	if (ret)
+		goto err_io;
+
+	/* retry until adc conversion is done */
+	data = 0;
+	while (retry--) {
+		usleep_range(100, 200);
+
+		ret = lp8788_read_byte(adc->lp, LP8788_ADC_DONE, &data);
+		if (ret)
+			goto err_io;
+
+		/* conversion done */
+		if (data)
+			break;
+	}
+
+	ret = lp8788_read_multi_bytes(adc->lp, LP8788_ADC_RAW, rawdata, size);
+	if (ret)
+		goto err_io;
+
+	msb = (rawdata[0] << 4) & 0x00000ff0;
+	lsb = (rawdata[1] >> 4) & 0x0000000f;
+	result = msb | lsb;
+	*val = result;
+
+	return 0;
+
+err_io:
+	return ret;
+}
+
+static int lp8788_adc_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct lp8788_adc *adc = iio_priv(indio_dev);
+	enum lp8788_adc_id id = chan->channel;
+	int ret;
+
+	mutex_lock(&adc->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = lp8788_get_adc_result(adc, id, val) ? -EIO : IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = lp8788_scale[id] / 1000000;
+		*val2 = lp8788_scale[id] % 1000000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&adc->lock);
+
+	return ret;
+}
+
+static const struct iio_info lp8788_adc_info = {
+	.read_raw = &lp8788_adc_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+#define LP8788_CHAN(_id, _type) {				\
+		.type = _type,					\
+		.indexed = 1,					\
+		.channel = LPADC_##_id,				\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,	\
+		.datasheet_name = #_id,				\
+}
+
+static const struct iio_chan_spec lp8788_adc_channels[] = {
+	[LPADC_VBATT_5P5] = LP8788_CHAN(VBATT_5P5, IIO_VOLTAGE),
+	[LPADC_VIN_CHG]   = LP8788_CHAN(VIN_CHG, IIO_VOLTAGE),
+	[LPADC_IBATT]     = LP8788_CHAN(IBATT, IIO_CURRENT),
+	[LPADC_IC_TEMP]   = LP8788_CHAN(IC_TEMP, IIO_TEMP),
+	[LPADC_VBATT_6P0] = LP8788_CHAN(VBATT_6P0, IIO_VOLTAGE),
+	[LPADC_VBATT_5P0] = LP8788_CHAN(VBATT_5P0, IIO_VOLTAGE),
+	[LPADC_ADC1]      = LP8788_CHAN(ADC1, IIO_VOLTAGE),
+	[LPADC_ADC2]      = LP8788_CHAN(ADC2, IIO_VOLTAGE),
+	[LPADC_VDD]       = LP8788_CHAN(VDD, IIO_VOLTAGE),
+	[LPADC_VCOIN]     = LP8788_CHAN(VCOIN, IIO_VOLTAGE),
+	[LPADC_ADC3]      = LP8788_CHAN(ADC3, IIO_VOLTAGE),
+	[LPADC_ADC4]      = LP8788_CHAN(ADC4, IIO_VOLTAGE),
+};
+
+/* default maps used by iio consumer (lp8788-charger driver) */
+static struct iio_map lp8788_default_iio_maps[] = {
+	{
+		.consumer_dev_name = "lp8788-charger",
+		.consumer_channel = "lp8788_vbatt_5p0",
+		.adc_channel_label = "VBATT_5P0",
+	},
+	{
+		.consumer_dev_name = "lp8788-charger",
+		.consumer_channel = "lp8788_adc1",
+		.adc_channel_label = "ADC1",
+	},
+	{ }
+};
+
+static int lp8788_iio_map_register(struct iio_dev *indio_dev,
+				struct lp8788_platform_data *pdata,
+				struct lp8788_adc *adc)
+{
+	struct iio_map *map;
+	int ret;
+
+	map = (!pdata || !pdata->adc_pdata) ?
+		lp8788_default_iio_maps : pdata->adc_pdata;
+
+	ret = iio_map_array_register(indio_dev, map);
+	if (ret) {
+		dev_err(adc->lp->dev, "iio map err: %d\n", ret);
+		return ret;
+	}
+
+	adc->map = map;
+	return 0;
+}
+
+static inline void lp8788_iio_map_unregister(struct iio_dev *indio_dev,
+				struct lp8788_adc *adc)
+{
+	iio_map_array_unregister(indio_dev, adc->map);
+}
+
+static int __devinit lp8788_adc_probe(struct platform_device *pdev)
+{
+	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev;
+	struct lp8788_adc *adc;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->lp = lp;
+	platform_set_drvdata(pdev, indio_dev);
+
+	ret = lp8788_iio_map_register(indio_dev, lp->pdata, adc);
+	if (ret)
+		goto err_iio_map;
+
+	mutex_init(&adc->lock);
+
+	indio_dev->dev.parent = lp->dev;
+	indio_dev->name = pdev->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &lp8788_adc_info;
+	indio_dev->channels = lp8788_adc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(lp8788_adc_channels);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(lp->dev, "iio dev register err: %d\n", ret);
+		goto err_iio_device;
+	}
+
+	return 0;
+
+err_iio_device:
+	lp8788_iio_map_unregister(indio_dev, adc);
+err_iio_map:
+	iio_device_free(indio_dev);
+	return ret;
+}
+
+static int __devexit lp8788_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct lp8788_adc *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	lp8788_iio_map_unregister(indio_dev, adc);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver lp8788_adc_driver = {
+	.probe = lp8788_adc_probe,
+	.remove = __devexit_p(lp8788_adc_remove),
+	.driver = {
+		.name = LP8788_DEV_ADC,
+		.owner = THIS_MODULE,
+	},
+};
+module_platform_driver(lp8788_adc_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8788 ADC Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-adc");
diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig
new file mode 100644
index 00000000000..ed45ee54500
--- /dev/null
+++ b/drivers/iio/common/Kconfig
@@ -0,0 +1,5 @@
+#
+# IIO common modules
+#
+
+source "drivers/iio/common/hid-sensors/Kconfig"
diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile
new file mode 100644
index 00000000000..81584009b21
--- /dev/null
+++ b/drivers/iio/common/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the IIO common modules.
+# Common modules contains modules, which can be shared among multiple
+# IIO modules. For example if the trigger processing is common for
+# multiple IIO modules then this can be moved to a common module
+# instead of duplicating in each module.
+#
+
+obj-y += hid-sensors/
diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
new file mode 100644
index 00000000000..8e63d81d652
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -0,0 +1,26 @@
+#
+# Hid Sensor common modules
+#
+menu "Hid Sensor IIO Common"
+
+config HID_SENSOR_IIO_COMMON
+	tristate "Common modules for all HID Sensor IIO drivers"
+	depends on HID_SENSOR_HUB
+	select IIO_TRIGGER if IIO_BUFFER
+	help
+	  Say yes here to build support for HID sensor to use
+	  HID sensor common processing for attributes and IIO triggers.
+	  There are many attributes which can be shared among multiple
+	  HID sensor drivers, this module contains processing for those
+	  attributes.
+
+config HID_SENSOR_ENUM_BASE_QUIRKS
+	tristate "ENUM base quirks for HID Sensor IIO drivers"
+	depends on HID_SENSOR_IIO_COMMON
+	help
+	  Say yes here to build support for sensor hub FW using
+	  enumeration, which is using 1 as base instead of 0.
+	  Since logical minimum is still set 0 instead of 1,
+	  there is no easy way to differentiate.
+
+endmenu
diff --git a/drivers/iio/common/hid-sensors/Makefile b/drivers/iio/common/hid-sensors/Makefile
new file mode 100644
index 00000000000..1f463e00c24
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Hid sensor common modules.
+#
+
+obj-$(CONFIG_HID_SENSOR_IIO_COMMON) += hid-sensor-iio-common.o
+hid-sensor-iio-common-y := hid-sensor-attributes.o hid-sensor-trigger.o
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
new file mode 100644
index 00000000000..75374955cab
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -0,0 +1,250 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include "hid-sensor-attributes.h"
+
+static int pow_10(unsigned power)
+{
+	int i;
+	int ret = 1;
+	for (i = 0; i < power; ++i)
+		ret = ret * 10;
+
+	return ret;
+}
+
+static void simple_div(int dividend, int divisor, int *whole,
+				int *micro_frac)
+{
+	int rem;
+	int exp = 0;
+
+	*micro_frac = 0;
+	if (divisor == 0) {
+		*whole = 0;
+		return;
+	}
+	*whole = dividend/divisor;
+	rem = dividend % divisor;
+	if (rem) {
+		while (rem <= divisor) {
+			rem *= 10;
+			exp++;
+		}
+		*micro_frac = (rem / divisor) * pow_10(6-exp);
+	}
+}
+
+static void split_micro_fraction(unsigned int no, int exp, int *val1, int *val2)
+{
+	*val1 = no/pow_10(exp);
+	*val2 = no%pow_10(exp) * pow_10(6-exp);
+}
+
+/*
+VTF format uses exponent and variable size format.
+For example if the size is 2 bytes
+0x0067 with VTF16E14 format -> +1.03
+To convert just change to 0x67 to decimal and use two decimal as E14 stands
+for 10^-2.
+Negative numbers are 2's complement
+*/
+static void convert_from_vtf_format(u32 value, int size, int exp,
+					int *val1, int *val2)
+{
+	int sign = 1;
+
+	if (value & BIT(size*8 - 1)) {
+		value =  ((1LL << (size * 8)) - value);
+		sign = -1;
+	}
+	exp = hid_sensor_convert_exponent(exp);
+	if (exp >= 0) {
+		*val1 = sign * value * pow_10(exp);
+		*val2 = 0;
+	} else {
+		split_micro_fraction(value, -exp, val1, val2);
+		if (*val1)
+			*val1 = sign * (*val1);
+		else
+			*val2 = sign * (*val2);
+	}
+}
+
+static u32 convert_to_vtf_format(int size, int exp, int val1, int val2)
+{
+	u32 value;
+	int sign = 1;
+
+	if (val1 < 0 || val2 < 0)
+		sign = -1;
+	exp = hid_sensor_convert_exponent(exp);
+	if (exp < 0) {
+		value = abs(val1) * pow_10(-exp);
+		value += abs(val2) / pow_10(6+exp);
+	} else
+		value = abs(val1) / pow_10(exp);
+	if (sign < 0)
+		value =  ((1LL << (size * 8)) - value);
+
+	return value;
+}
+
+int hid_sensor_read_samp_freq_value(struct hid_sensor_iio_common *st,
+				int *val1, int *val2)
+{
+	s32 value;
+	int ret;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+		st->poll.report_id,
+		st->poll.index, &value);
+	if (ret < 0 || value < 0) {
+		*val1 = *val2 = 0;
+		return -EINVAL;
+	} else {
+		if (st->poll.units == HID_USAGE_SENSOR_UNITS_MILLISECOND)
+			simple_div(1000, value, val1, val2);
+		else if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
+			simple_div(1, value, val1, val2);
+		else {
+			*val1 = *val2 = 0;
+			return -EINVAL;
+		}
+	}
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL(hid_sensor_read_samp_freq_value);
+
+int hid_sensor_write_samp_freq_value(struct hid_sensor_iio_common *st,
+				int val1, int val2)
+{
+	s32 value;
+	int ret;
+
+	if (val1 < 0 || val2 < 0)
+		ret = -EINVAL;
+
+	value = val1 * pow_10(6) + val2;
+	if (value) {
+		if (st->poll.units == HID_USAGE_SENSOR_UNITS_MILLISECOND)
+			value = pow_10(9)/value;
+		else if (st->poll.units == HID_USAGE_SENSOR_UNITS_SECOND)
+			value = pow_10(6)/value;
+		else
+			value = 0;
+	}
+	ret = sensor_hub_set_feature(st->hsdev,
+		st->poll.report_id,
+		st->poll.index, value);
+	if (ret < 0 || value < 0)
+		ret = -EINVAL;
+
+	return ret;
+}
+EXPORT_SYMBOL(hid_sensor_write_samp_freq_value);
+
+int hid_sensor_read_raw_hyst_value(struct hid_sensor_iio_common *st,
+				int *val1, int *val2)
+{
+	s32 value;
+	int ret;
+
+	ret = sensor_hub_get_feature(st->hsdev,
+		st->sensitivity.report_id,
+		st->sensitivity.index, &value);
+	if (ret < 0 || value < 0) {
+		*val1 = *val2 = 0;
+		return -EINVAL;
+	} else {
+		convert_from_vtf_format(value, st->sensitivity.size,
+					st->sensitivity.unit_expo,
+					val1, val2);
+	}
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+EXPORT_SYMBOL(hid_sensor_read_raw_hyst_value);
+
+int hid_sensor_write_raw_hyst_value(struct hid_sensor_iio_common *st,
+					int val1, int val2)
+{
+	s32 value;
+	int ret;
+
+	value = convert_to_vtf_format(st->sensitivity.size,
+				st->sensitivity.unit_expo,
+				val1, val2);
+	ret = sensor_hub_set_feature(st->hsdev,
+		st->sensitivity.report_id,
+		st->sensitivity.index, value);
+	if (ret < 0 || value < 0)
+		ret = -EINVAL;
+
+	return ret;
+}
+EXPORT_SYMBOL(hid_sensor_write_raw_hyst_value);
+
+int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
+					u32 usage_id,
+					struct hid_sensor_iio_common *st)
+{
+
+	sensor_hub_input_get_attribute_info(hsdev,
+					HID_FEATURE_REPORT, usage_id,
+					HID_USAGE_SENSOR_PROP_REPORT_INTERVAL,
+					&st->poll);
+
+	sensor_hub_input_get_attribute_info(hsdev,
+					HID_FEATURE_REPORT, usage_id,
+					HID_USAGE_SENSOR_PROP_REPORT_STATE,
+					&st->report_state);
+
+	sensor_hub_input_get_attribute_info(hsdev,
+					HID_FEATURE_REPORT, usage_id,
+					HID_USAGE_SENSOR_PROY_POWER_STATE,
+					&st->power_state);
+
+	sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS,
+			 &st->sensitivity);
+
+	hid_dbg(hsdev->hdev, "common attributes: %x:%x, %x:%x, %x:%x %x:%x\n",
+			st->poll.index, st->poll.report_id,
+			st->report_state.index, st->report_state.report_id,
+			st->power_state.index, st->power_state.report_id,
+			st->sensitivity.index, st->sensitivity.report_id);
+
+	return 0;
+}
+EXPORT_SYMBOL(hid_sensor_parse_common_attributes);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_DESCRIPTION("HID Sensor common attribute processing");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.h b/drivers/iio/common/hid-sensors/hid-sensor-attributes.h
new file mode 100644
index 00000000000..a4676a0c3de
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.h
@@ -0,0 +1,57 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _HID_SENSORS_ATTRIBUTES_H
+#define _HID_SENSORS_ATTRIBUTES_H
+
+/* Common hid sensor iio structure */
+struct hid_sensor_iio_common {
+	struct hid_sensor_hub_device *hsdev;
+	struct platform_device *pdev;
+	unsigned usage_id;
+	bool data_ready;
+	struct hid_sensor_hub_attribute_info poll;
+	struct hid_sensor_hub_attribute_info report_state;
+	struct hid_sensor_hub_attribute_info power_state;
+	struct hid_sensor_hub_attribute_info sensitivity;
+};
+
+/*Convert from hid unit expo to regular exponent*/
+static inline int hid_sensor_convert_exponent(int unit_expo)
+{
+	if (unit_expo < 0x08)
+		return unit_expo;
+	else if (unit_expo <= 0x0f)
+		return -(0x0f-unit_expo+1);
+	else
+		return 0;
+}
+
+int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
+					u32 usage_id,
+					struct hid_sensor_iio_common *st);
+int hid_sensor_write_raw_hyst_value(struct hid_sensor_iio_common *st,
+					int val1, int val2);
+int hid_sensor_read_raw_hyst_value(struct hid_sensor_iio_common *st,
+					int *val1, int *val2);
+int hid_sensor_write_samp_freq_value(struct hid_sensor_iio_common *st,
+					int val1, int val2);
+int hid_sensor_read_samp_freq_value(struct hid_sensor_iio_common *st,
+					int *val1, int *val2);
+
+#endif
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
new file mode 100644
index 00000000000..d4b790d18ef
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -0,0 +1,103 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/sysfs.h>
+#include "hid-sensor-attributes.h"
+#include "hid-sensor-trigger.h"
+
+static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
+						bool state)
+{
+	struct hid_sensor_iio_common *st = trig->private_data;
+	int state_val;
+
+	state_val = state ? 1 : 0;
+#if (defined CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS) || \
+	(defined CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS_MODULE)
+	++state_val;
+#endif
+	st->data_ready = state;
+	sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
+					st->power_state.index,
+					(s32)state_val);
+
+	sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
+					st->report_state.index,
+					(s32)state_val);
+
+	return 0;
+}
+
+void hid_sensor_remove_trigger(struct iio_dev *indio_dev)
+{
+	iio_trigger_unregister(indio_dev->trig);
+	iio_trigger_free(indio_dev->trig);
+	indio_dev->trig = NULL;
+}
+EXPORT_SYMBOL(hid_sensor_remove_trigger);
+
+static const struct iio_trigger_ops hid_sensor_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = &hid_sensor_data_rdy_trigger_set_state,
+};
+
+int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
+				struct hid_sensor_iio_common *attrb)
+{
+	int ret;
+	struct iio_trigger *trig;
+
+	trig = iio_trigger_alloc("%s-dev%d", name, indio_dev->id);
+	if (trig == NULL) {
+		dev_err(&indio_dev->dev, "Trigger Allocate Failed\n");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	trig->dev.parent = indio_dev->dev.parent;
+	trig->private_data = attrb;
+	trig->ops = &hid_sensor_trigger_ops;
+	ret = iio_trigger_register(trig);
+
+	if (ret) {
+		dev_err(&indio_dev->dev, "Trigger Register Failed\n");
+		goto error_free_trig;
+	}
+	indio_dev->trig = trig;
+
+	return ret;
+
+error_free_trig:
+	iio_trigger_free(trig);
+error_ret:
+	return ret;
+}
+EXPORT_SYMBOL(hid_sensor_setup_trigger);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_DESCRIPTION("HID Sensor trigger processing");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
new file mode 100644
index 00000000000..fd982971b1b
--- /dev/null
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
@@ -0,0 +1,26 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _HID_SENSOR_TRIGGER_H
+#define _HID_SENSOR_TRIGGER_H
+
+int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
+				struct hid_sensor_iio_common *attrb);
+void hid_sensor_remove_trigger(struct iio_dev *indio_dev);
+
+#endif
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 1be15fa9d61..b1c0ee5294c 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -57,11 +57,12 @@ config AD5624R_SPI
 
 config AD5446
 	tristate "Analog Devices AD5446 and similar single channel DACs driver"
-	depends on SPI
+	depends on (SPI_MASTER || I2C)
 	help
-	  Say yes here to build support for Analog Devices AD5444, AD5446, AD5450,
-	  AD5451, AD5452, AD5453, AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601,
-	  AD5611, AD5620, AD5621, AD5640, AD5660, AD5662 DACs.
+	  Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
+	  AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453,
+	  AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5602, AD5611, AD5612,
+	  AD5620, AD5621, AD5622, AD5640, AD5660, AD5662 DACs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5446.
@@ -76,6 +77,17 @@ config AD5504
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5504.
 
+config AD5755
+	tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver"
+	depends on SPI_MASTER
+	help
+	  Say yes here to build support for Analog Devices AD5755, AD5755-1,
+	  AD5757, AD5735, AD5737 quad channel Digital to
+	  Analog Converter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5755.
+
 config AD5764
 	tristate "Analog Devices AD5764/64R/44/44R DAC driver"
 	depends on SPI_MASTER
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 9ea3ceeefc0..c0d333b23ba 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_AD5624R_SPI) += ad5624r_spi.o
 obj-$(CONFIG_AD5064) += ad5064.o
 obj-$(CONFIG_AD5504) += ad5504.o
 obj-$(CONFIG_AD5446) += ad5446.o
+obj-$(CONFIG_AD5755) += ad5755.o
 obj-$(CONFIG_AD5764) += ad5764.o
 obj-$(CONFIG_AD5791) += ad5791.o
 obj-$(CONFIG_AD5686) += ad5686.o
diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
index 2ca5059ef89..3310cbbd41e 100644
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -14,6 +14,7 @@
 #include <linux/sysfs.h>
 #include <linux/list.h>
 #include <linux/spi/spi.h>
+#include <linux/i2c.h>
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
 #include <linux/module.h>
@@ -21,24 +22,40 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
-#include "ad5446.h"
+#define MODE_PWRDWN_1k		0x1
+#define MODE_PWRDWN_100k	0x2
+#define MODE_PWRDWN_TRISTATE	0x3
 
-static int ad5446_write(struct ad5446_state *st, unsigned val)
-{
-	__be16 data = cpu_to_be16(val);
-	return spi_write(st->spi, &data, sizeof(data));
-}
+/**
+ * struct ad5446_state - driver instance specific data
+ * @spi:		spi_device
+ * @chip_info:		chip model specific constants, available modes etc
+ * @reg:		supply regulator
+ * @vref_mv:		actual reference voltage used
+ */
 
-static int ad5660_write(struct ad5446_state *st, unsigned val)
-{
-	uint8_t data[3];
+struct ad5446_state {
+	struct device		*dev;
+	const struct ad5446_chip_info	*chip_info;
+	struct regulator		*reg;
+	unsigned short			vref_mv;
+	unsigned			cached_val;
+	unsigned			pwr_down_mode;
+	unsigned			pwr_down;
+};
 
-	data[0] = (val >> 16) & 0xFF;
-	data[1] = (val >> 8) & 0xFF;
-	data[2] = val & 0xFF;
+/**
+ * struct ad5446_chip_info - chip specific information
+ * @channel:		channel spec for the DAC
+ * @int_vref_mv:	AD5620/40/60: the internal reference voltage
+ * @write:		chip specific helper function to write to the register
+ */
 
-	return spi_write(st->spi, data, sizeof(data));
-}
+struct ad5446_chip_info {
+	struct iio_chan_spec	channel;
+	u16			int_vref_mv;
+	int			(*write)(struct ad5446_state *st, unsigned val);
+};
 
 static const char * const ad5446_powerdown_modes[] = {
 	"1kohm_to_gnd", "100kohm_to_gnd", "three_state"
@@ -110,7 +127,7 @@ static ssize_t ad5446_write_dac_powerdown(struct iio_dev *indio_dev,
 	return ret ? ret : len;
 }
 
-static const struct iio_chan_spec_ext_info ad5064_ext_info_powerdown[] = {
+static const struct iio_chan_spec_ext_info ad5446_ext_info_powerdown[] = {
 	{
 		.name = "powerdown",
 		.read = ad5446_read_dac_powerdown,
@@ -136,84 +153,7 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info_powerdown[] = {
 	_AD5446_CHANNEL(bits, storage, shift, NULL)
 
 #define AD5446_CHANNEL_POWERDOWN(bits, storage, shift) \
-	_AD5446_CHANNEL(bits, storage, shift, ad5064_ext_info_powerdown)
-
-static const struct ad5446_chip_info ad5446_chip_info_tbl[] = {
-	[ID_AD5444] = {
-		.channel = AD5446_CHANNEL(12, 16, 2),
-		.write = ad5446_write,
-	},
-	[ID_AD5446] = {
-		.channel = AD5446_CHANNEL(14, 16, 0),
-		.write = ad5446_write,
-	},
-	[ID_AD5450] = {
-		.channel = AD5446_CHANNEL(8, 16, 6),
-		.write = ad5446_write,
-	},
-	[ID_AD5451] = {
-		.channel = AD5446_CHANNEL(10, 16, 4),
-		.write = ad5446_write,
-	},
-	[ID_AD5541A] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
-		.write = ad5446_write,
-	},
-	[ID_AD5512A] = {
-		.channel = AD5446_CHANNEL(12, 16, 4),
-		.write = ad5446_write,
-	},
-	[ID_AD5553] = {
-		.channel = AD5446_CHANNEL(14, 16, 0),
-		.write = ad5446_write,
-	},
-	[ID_AD5601] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
-		.write = ad5446_write,
-	},
-	[ID_AD5611] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 4),
-		.write = ad5446_write,
-	},
-	[ID_AD5621] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
-		.write = ad5446_write,
-	},
-	[ID_AD5620_2500] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
-		.int_vref_mv = 2500,
-		.write = ad5446_write,
-	},
-	[ID_AD5620_1250] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
-		.int_vref_mv = 1250,
-		.write = ad5446_write,
-	},
-	[ID_AD5640_2500] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
-		.int_vref_mv = 2500,
-		.write = ad5446_write,
-	},
-	[ID_AD5640_1250] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
-		.int_vref_mv = 1250,
-		.write = ad5446_write,
-	},
-	[ID_AD5660_2500] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
-		.int_vref_mv = 2500,
-		.write = ad5660_write,
-	},
-	[ID_AD5660_1250] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
-		.int_vref_mv = 1250,
-		.write = ad5660_write,
-	},
-	[ID_AD5662] = {
-		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
-		.write = ad5660_write,
-	},
-};
+	_AD5446_CHANNEL(bits, storage, shift, ad5446_ext_info_powerdown)
 
 static int ad5446_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
@@ -272,14 +212,15 @@ static const struct iio_info ad5446_info = {
 	.driver_module = THIS_MODULE,
 };
 
-static int __devinit ad5446_probe(struct spi_device *spi)
+static int __devinit ad5446_probe(struct device *dev, const char *name,
+	const struct ad5446_chip_info *chip_info)
 {
 	struct ad5446_state *st;
 	struct iio_dev *indio_dev;
 	struct regulator *reg;
 	int ret, voltage_uv = 0;
 
-	reg = regulator_get(&spi->dev, "vcc");
+	reg = regulator_get(dev, "vcc");
 	if (!IS_ERR(reg)) {
 		ret = regulator_enable(reg);
 		if (ret)
@@ -294,16 +235,15 @@ static int __devinit ad5446_probe(struct spi_device *spi)
 		goto error_disable_reg;
 	}
 	st = iio_priv(indio_dev);
-	st->chip_info =
-		&ad5446_chip_info_tbl[spi_get_device_id(spi)->driver_data];
+	st->chip_info = chip_info;
 
-	spi_set_drvdata(spi, indio_dev);
+	dev_set_drvdata(dev, indio_dev);
 	st->reg = reg;
-	st->spi = spi;
+	st->dev = dev;
 
-	/* Establish that the iio_dev is a child of the spi device */
-	indio_dev->dev.parent = &spi->dev;
-	indio_dev->name = spi_get_device_id(spi)->name;
+	/* Establish that the iio_dev is a child of the device */
+	indio_dev->dev.parent = dev;
+	indio_dev->name = name;
 	indio_dev->info = &ad5446_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = &st->chip_info->channel;
@@ -316,7 +256,7 @@ static int __devinit ad5446_probe(struct spi_device *spi)
 	else if (voltage_uv)
 		st->vref_mv = voltage_uv / 1000;
 	else
-		dev_warn(&spi->dev, "reference voltage unspecified\n");
+		dev_warn(dev, "reference voltage unspecified\n");
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
@@ -336,9 +276,9 @@ error_put_reg:
 	return ret;
 }
 
-static int ad5446_remove(struct spi_device *spi)
+static int ad5446_remove(struct device *dev)
 {
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
@@ -351,7 +291,151 @@ static int ad5446_remove(struct spi_device *spi)
 	return 0;
 }
 
-static const struct spi_device_id ad5446_id[] = {
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static int ad5446_write(struct ad5446_state *st, unsigned val)
+{
+	struct spi_device *spi = to_spi_device(st->dev);
+	__be16 data = cpu_to_be16(val);
+
+	return spi_write(spi, &data, sizeof(data));
+}
+
+static int ad5660_write(struct ad5446_state *st, unsigned val)
+{
+	struct spi_device *spi = to_spi_device(st->dev);
+	uint8_t data[3];
+
+	data[0] = (val >> 16) & 0xFF;
+	data[1] = (val >> 8) & 0xFF;
+	data[2] = val & 0xFF;
+
+	return spi_write(spi, data, sizeof(data));
+}
+
+/**
+ * ad5446_supported_spi_device_ids:
+ * The AD5620/40/60 parts are available in different fixed internal reference
+ * voltage options. The actual part numbers may look differently
+ * (and a bit cryptic), however this style is used to make clear which
+ * parts are supported here.
+ */
+enum ad5446_supported_spi_device_ids {
+	ID_AD5300,
+	ID_AD5310,
+	ID_AD5320,
+	ID_AD5444,
+	ID_AD5446,
+	ID_AD5450,
+	ID_AD5451,
+	ID_AD5541A,
+	ID_AD5512A,
+	ID_AD5553,
+	ID_AD5601,
+	ID_AD5611,
+	ID_AD5621,
+	ID_AD5620_2500,
+	ID_AD5620_1250,
+	ID_AD5640_2500,
+	ID_AD5640_1250,
+	ID_AD5660_2500,
+	ID_AD5660_1250,
+	ID_AD5662,
+};
+
+static const struct ad5446_chip_info ad5446_spi_chip_info[] = {
+	[ID_AD5300] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 4),
+		.write = ad5446_write,
+	},
+	[ID_AD5310] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 2),
+		.write = ad5446_write,
+	},
+	[ID_AD5320] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5444] = {
+		.channel = AD5446_CHANNEL(12, 16, 2),
+		.write = ad5446_write,
+	},
+	[ID_AD5446] = {
+		.channel = AD5446_CHANNEL(14, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5450] = {
+		.channel = AD5446_CHANNEL(8, 16, 6),
+		.write = ad5446_write,
+	},
+	[ID_AD5451] = {
+		.channel = AD5446_CHANNEL(10, 16, 4),
+		.write = ad5446_write,
+	},
+	[ID_AD5541A] = {
+		.channel = AD5446_CHANNEL(16, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5512A] = {
+		.channel = AD5446_CHANNEL(12, 16, 4),
+		.write = ad5446_write,
+	},
+	[ID_AD5553] = {
+		.channel = AD5446_CHANNEL(14, 16, 0),
+		.write = ad5446_write,
+	},
+	[ID_AD5601] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
+		.write = ad5446_write,
+	},
+	[ID_AD5611] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 4),
+		.write = ad5446_write,
+	},
+	[ID_AD5621] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
+		.write = ad5446_write,
+	},
+	[ID_AD5620_2500] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
+		.int_vref_mv = 2500,
+		.write = ad5446_write,
+	},
+	[ID_AD5620_1250] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
+		.int_vref_mv = 1250,
+		.write = ad5446_write,
+	},
+	[ID_AD5640_2500] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
+		.int_vref_mv = 2500,
+		.write = ad5446_write,
+	},
+	[ID_AD5640_1250] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
+		.int_vref_mv = 1250,
+		.write = ad5446_write,
+	},
+	[ID_AD5660_2500] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
+		.int_vref_mv = 2500,
+		.write = ad5660_write,
+	},
+	[ID_AD5660_1250] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
+		.int_vref_mv = 1250,
+		.write = ad5660_write,
+	},
+	[ID_AD5662] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
+		.write = ad5660_write,
+	},
+};
+
+static const struct spi_device_id ad5446_spi_ids[] = {
+	{"ad5300", ID_AD5300},
+	{"ad5310", ID_AD5310},
+	{"ad5320", ID_AD5320},
 	{"ad5444", ID_AD5444},
 	{"ad5446", ID_AD5446},
 	{"ad5450", ID_AD5450},
@@ -375,18 +459,160 @@ static const struct spi_device_id ad5446_id[] = {
 	{"ad5662", ID_AD5662},
 	{}
 };
-MODULE_DEVICE_TABLE(spi, ad5446_id);
+MODULE_DEVICE_TABLE(spi, ad5446_spi_ids);
+
+static int __devinit ad5446_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
 
-static struct spi_driver ad5446_driver = {
+	return ad5446_probe(&spi->dev, id->name,
+		&ad5446_spi_chip_info[id->driver_data]);
+}
+
+static int __devexit ad5446_spi_remove(struct spi_device *spi)
+{
+	return ad5446_remove(&spi->dev);
+}
+
+static struct spi_driver ad5446_spi_driver = {
 	.driver = {
 		.name	= "ad5446",
 		.owner	= THIS_MODULE,
 	},
-	.probe		= ad5446_probe,
-	.remove		= __devexit_p(ad5446_remove),
-	.id_table	= ad5446_id,
+	.probe		= ad5446_spi_probe,
+	.remove		= __devexit_p(ad5446_spi_remove),
+	.id_table	= ad5446_spi_ids,
 };
-module_spi_driver(ad5446_driver);
+
+static int __init ad5446_spi_register_driver(void)
+{
+	return spi_register_driver(&ad5446_spi_driver);
+}
+
+static void ad5446_spi_unregister_driver(void)
+{
+	spi_unregister_driver(&ad5446_spi_driver);
+}
+
+#else
+
+static inline int ad5446_spi_register_driver(void) { return 0; }
+static inline void ad5446_spi_unregister_driver(void) { }
+
+#endif
+
+#if IS_ENABLED(CONFIG_I2C)
+
+static int ad5622_write(struct ad5446_state *st, unsigned val)
+{
+	struct i2c_client *client = to_i2c_client(st->dev);
+	__be16 data = cpu_to_be16(val);
+
+	return i2c_master_send(client, (char *)&data, sizeof(data));
+}
+
+/**
+ * ad5446_supported_i2c_device_ids:
+ * The AD5620/40/60 parts are available in different fixed internal reference
+ * voltage options. The actual part numbers may look differently
+ * (and a bit cryptic), however this style is used to make clear which
+ * parts are supported here.
+ */
+enum ad5446_supported_i2c_device_ids {
+	ID_AD5602,
+	ID_AD5612,
+	ID_AD5622,
+};
+
+static const struct ad5446_chip_info ad5446_i2c_chip_info[] = {
+	[ID_AD5602] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 4),
+		.write = ad5622_write,
+	},
+	[ID_AD5612] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 2),
+		.write = ad5622_write,
+	},
+	[ID_AD5622] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 0),
+		.write = ad5622_write,
+	},
+};
+
+static int __devinit ad5446_i2c_probe(struct i2c_client *i2c,
+	const struct i2c_device_id *id)
+{
+	return ad5446_probe(&i2c->dev, id->name,
+		&ad5446_i2c_chip_info[id->driver_data]);
+}
+
+static int __devexit ad5446_i2c_remove(struct i2c_client *i2c)
+{
+	return ad5446_remove(&i2c->dev);
+}
+
+static const struct i2c_device_id ad5446_i2c_ids[] = {
+	{"ad5301", ID_AD5602},
+	{"ad5311", ID_AD5612},
+	{"ad5321", ID_AD5622},
+	{"ad5602", ID_AD5602},
+	{"ad5612", ID_AD5612},
+	{"ad5622", ID_AD5622},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad5446_i2c_ids);
+
+static struct i2c_driver ad5446_i2c_driver = {
+	.driver = {
+		   .name = "ad5446",
+		   .owner = THIS_MODULE,
+	},
+	.probe = ad5446_i2c_probe,
+	.remove = __devexit_p(ad5446_i2c_remove),
+	.id_table = ad5446_i2c_ids,
+};
+
+static int __init ad5446_i2c_register_driver(void)
+{
+	return i2c_add_driver(&ad5446_i2c_driver);
+}
+
+static void __exit ad5446_i2c_unregister_driver(void)
+{
+	i2c_del_driver(&ad5446_i2c_driver);
+}
+
+#else
+
+static inline int ad5446_i2c_register_driver(void) { return 0; }
+static inline void ad5446_i2c_unregister_driver(void) { }
+
+#endif
+
+static int __init ad5446_init(void)
+{
+	int ret;
+
+	ret = ad5446_spi_register_driver();
+	if (ret)
+		return ret;
+
+	ret = ad5446_i2c_register_driver();
+	if (ret) {
+		ad5446_spi_unregister_driver();
+		return ret;
+	}
+
+	return 0;
+}
+module_init(ad5446_init);
+
+static void __exit ad5446_exit(void)
+{
+	ad5446_i2c_unregister_driver();
+	ad5446_spi_unregister_driver();
+}
+module_exit(ad5446_exit);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("Analog Devices AD5444/AD5446 DAC");
diff --git a/drivers/iio/dac/ad5446.h b/drivers/iio/dac/ad5446.h
deleted file mode 100644
index 2934269a56d..00000000000
--- a/drivers/iio/dac/ad5446.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * AD5446 SPI DAC driver
- *
- * Copyright 2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-#ifndef IIO_DAC_AD5446_H_
-#define IIO_DAC_AD5446_H_
-
-/* DAC Control Bits */
-
-#define AD5446_LOAD		(0x0 << 14) /* Load and update */
-#define AD5446_SDO_DIS		(0x1 << 14) /* Disable SDO */
-#define AD5446_NOP		(0x2 << 14) /* No operation */
-#define AD5446_CLK_RISING	(0x3 << 14) /* Clock data on rising edge */
-
-#define AD5620_LOAD		(0x0 << 14) /* Load and update Norm Operation*/
-#define AD5620_PWRDWN_1k	(0x1 << 14) /* Power-down: 1kOhm to GND */
-#define AD5620_PWRDWN_100k	(0x2 << 14) /* Power-down: 100kOhm to GND */
-#define AD5620_PWRDWN_TRISTATE	(0x3 << 14) /* Power-down: Three-state */
-
-#define AD5660_LOAD		(0x0 << 16) /* Load and update Norm Operation*/
-#define AD5660_PWRDWN_1k	(0x1 << 16) /* Power-down: 1kOhm to GND */
-#define AD5660_PWRDWN_100k	(0x2 << 16) /* Power-down: 100kOhm to GND */
-#define AD5660_PWRDWN_TRISTATE	(0x3 << 16) /* Power-down: Three-state */
-
-#define MODE_PWRDWN_1k		0x1
-#define MODE_PWRDWN_100k	0x2
-#define MODE_PWRDWN_TRISTATE	0x3
-
-/**
- * struct ad5446_state - driver instance specific data
- * @spi:		spi_device
- * @chip_info:		chip model specific constants, available modes etc
- * @reg:		supply regulator
- * @vref_mv:		actual reference voltage used
- */
-
-struct ad5446_state {
-	struct spi_device		*spi;
-	const struct ad5446_chip_info	*chip_info;
-	struct regulator		*reg;
-	unsigned short			vref_mv;
-	unsigned			cached_val;
-	unsigned			pwr_down_mode;
-	unsigned			pwr_down;
-};
-
-/**
- * struct ad5446_chip_info - chip specific information
- * @channel:		channel spec for the DAC
- * @int_vref_mv:	AD5620/40/60: the internal reference voltage
- * @write:		chip specific helper function to write to the register
- */
-
-struct ad5446_chip_info {
-	struct iio_chan_spec	channel;
-	u16			int_vref_mv;
-	int			(*write)(struct ad5446_state *st, unsigned val);
-};
-
-/**
- * ad5446_supported_device_ids:
- * The AD5620/40/60 parts are available in different fixed internal reference
- * voltage options. The actual part numbers may look differently
- * (and a bit cryptic), however this style is used to make clear which
- * parts are supported here.
- */
-
-enum ad5446_supported_device_ids {
-	ID_AD5444,
-	ID_AD5446,
-	ID_AD5450,
-	ID_AD5451,
-	ID_AD5541A,
-	ID_AD5512A,
-	ID_AD5553,
-	ID_AD5601,
-	ID_AD5611,
-	ID_AD5621,
-	ID_AD5620_2500,
-	ID_AD5620_1250,
-	ID_AD5640_2500,
-	ID_AD5640_1250,
-	ID_AD5660_2500,
-	ID_AD5660_1250,
-	ID_AD5662,
-};
-
-#endif /* IIO_DAC_AD5446_H_ */
diff --git a/drivers/iio/dac/ad5755.c b/drivers/iio/dac/ad5755.c
new file mode 100644
index 00000000000..5db3506034c
--- /dev/null
+++ b/drivers/iio/dac/ad5755.c
@@ -0,0 +1,650 @@
+/*
+ * AD5755, AD5755-1, AD5757, AD5735, AD5737 Digital to analog converters driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/platform_data/ad5755.h>
+
+#define AD5755_NUM_CHANNELS 4
+
+#define AD5755_ADDR(x)			((x) << 16)
+
+#define AD5755_WRITE_REG_DATA(chan)	(chan)
+#define AD5755_WRITE_REG_GAIN(chan)	(0x08 | (chan))
+#define AD5755_WRITE_REG_OFFSET(chan)	(0x10 | (chan))
+#define AD5755_WRITE_REG_CTRL(chan)	(0x1c | (chan))
+
+#define AD5755_READ_REG_DATA(chan)	(chan)
+#define AD5755_READ_REG_CTRL(chan)	(0x4 | (chan))
+#define AD5755_READ_REG_GAIN(chan)	(0x8 | (chan))
+#define AD5755_READ_REG_OFFSET(chan)	(0xc | (chan))
+#define AD5755_READ_REG_CLEAR(chan)	(0x10 | (chan))
+#define AD5755_READ_REG_SLEW(chan)	(0x14 | (chan))
+#define AD5755_READ_REG_STATUS		0x18
+#define AD5755_READ_REG_MAIN		0x19
+#define AD5755_READ_REG_DC_DC		0x1a
+
+#define AD5755_CTRL_REG_SLEW	0x0
+#define AD5755_CTRL_REG_MAIN	0x1
+#define AD5755_CTRL_REG_DAC	0x2
+#define AD5755_CTRL_REG_DC_DC	0x3
+#define AD5755_CTRL_REG_SW	0x4
+
+#define AD5755_READ_FLAG 0x800000
+
+#define AD5755_NOOP 0x1CE000
+
+#define AD5755_DAC_INT_EN			BIT(8)
+#define AD5755_DAC_CLR_EN			BIT(7)
+#define AD5755_DAC_OUT_EN			BIT(6)
+#define AD5755_DAC_INT_CURRENT_SENSE_RESISTOR	BIT(5)
+#define AD5755_DAC_DC_DC_EN			BIT(4)
+#define AD5755_DAC_VOLTAGE_OVERRANGE_EN		BIT(3)
+
+#define AD5755_DC_DC_MAXV			0
+#define AD5755_DC_DC_FREQ_SHIFT			2
+#define AD5755_DC_DC_PHASE_SHIFT		4
+#define AD5755_EXT_DC_DC_COMP_RES		BIT(6)
+
+#define AD5755_SLEW_STEP_SIZE_SHIFT		0
+#define AD5755_SLEW_RATE_SHIFT			3
+#define AD5755_SLEW_ENABLE			BIT(12)
+
+/**
+ * struct ad5755_chip_info - chip specific information
+ * @channel_template:	channel specification
+ * @calib_shift:	shift for the calibration data registers
+ * @has_voltage_out:	whether the chip has voltage outputs
+ */
+struct ad5755_chip_info {
+	const struct iio_chan_spec channel_template;
+	unsigned int calib_shift;
+	bool has_voltage_out;
+};
+
+/**
+ * struct ad5755_state - driver instance specific data
+ * @spi:	spi device the driver is attached to
+ * @chip_info:	chip model specific constants, available modes etc
+ * @pwr_down:	bitmask which contains  hether a channel is powered down or not
+ * @ctrl:	software shadow of the channel ctrl registers
+ * @channels:	iio channel spec for the device
+ * @data:	spi transfer buffers
+ */
+struct ad5755_state {
+	struct spi_device		*spi;
+	const struct ad5755_chip_info	*chip_info;
+	unsigned int			pwr_down;
+	unsigned int			ctrl[AD5755_NUM_CHANNELS];
+	struct iio_chan_spec		channels[AD5755_NUM_CHANNELS];
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+
+	union {
+		u32 d32;
+		u8 d8[4];
+	} data[2] ____cacheline_aligned;
+};
+
+enum ad5755_type {
+	ID_AD5755,
+	ID_AD5757,
+	ID_AD5735,
+	ID_AD5737,
+};
+
+static int ad5755_write_unlocked(struct iio_dev *indio_dev,
+	unsigned int reg, unsigned int val)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+
+	st->data[0].d32 = cpu_to_be32((reg << 16) | val);
+
+	return spi_write(st->spi, &st->data[0].d8[1], 3);
+}
+
+static int ad5755_write_ctrl_unlocked(struct iio_dev *indio_dev,
+	unsigned int channel, unsigned int reg, unsigned int val)
+{
+	return ad5755_write_unlocked(indio_dev,
+		AD5755_WRITE_REG_CTRL(channel), (reg << 13) | val);
+}
+
+static int ad5755_write(struct iio_dev *indio_dev, unsigned int reg,
+	unsigned int val)
+{
+	int ret;
+
+	mutex_lock(&indio_dev->mlock);
+	ret = ad5755_write_unlocked(indio_dev, reg, val);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int ad5755_write_ctrl(struct iio_dev *indio_dev, unsigned int channel,
+	unsigned int reg, unsigned int val)
+{
+	int ret;
+
+	mutex_lock(&indio_dev->mlock);
+	ret = ad5755_write_ctrl_unlocked(indio_dev, channel, reg, val);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int ad5755_read(struct iio_dev *indio_dev, unsigned int addr)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+	struct spi_message m;
+	int ret;
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = &st->data[0].d8[1],
+			.len = 3,
+			.cs_change = 1,
+		}, {
+			.tx_buf = &st->data[1].d8[1],
+			.rx_buf = &st->data[1].d8[1],
+			.len = 3,
+		},
+	};
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t[0], &m);
+	spi_message_add_tail(&t[1], &m);
+
+	mutex_lock(&indio_dev->mlock);
+
+	st->data[0].d32 = cpu_to_be32(AD5755_READ_FLAG | (addr << 16));
+	st->data[1].d32 = cpu_to_be32(AD5755_NOOP);
+
+	ret = spi_sync(st->spi, &m);
+	if (ret >= 0)
+		ret = be32_to_cpu(st->data[1].d32) & 0xffff;
+
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int ad5755_update_dac_ctrl(struct iio_dev *indio_dev,
+	unsigned int channel, unsigned int set, unsigned int clr)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+	int ret;
+
+	st->ctrl[channel] |= set;
+	st->ctrl[channel] &= ~clr;
+
+	ret = ad5755_write_ctrl_unlocked(indio_dev, channel,
+		AD5755_CTRL_REG_DAC, st->ctrl[channel]);
+
+	return ret;
+}
+
+static int ad5755_set_channel_pwr_down(struct iio_dev *indio_dev,
+	unsigned int channel, bool pwr_down)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+	unsigned int mask = BIT(channel);
+
+	mutex_lock(&indio_dev->mlock);
+
+	if ((bool)(st->pwr_down & mask) == pwr_down)
+		goto out_unlock;
+
+	if (!pwr_down) {
+		st->pwr_down &= ~mask;
+		ad5755_update_dac_ctrl(indio_dev, channel,
+			AD5755_DAC_INT_EN | AD5755_DAC_DC_DC_EN, 0);
+		udelay(200);
+		ad5755_update_dac_ctrl(indio_dev, channel,
+			AD5755_DAC_OUT_EN, 0);
+	} else {
+		st->pwr_down |= mask;
+		ad5755_update_dac_ctrl(indio_dev, channel,
+			0, AD5755_DAC_INT_EN | AD5755_DAC_OUT_EN |
+				AD5755_DAC_DC_DC_EN);
+	}
+
+out_unlock:
+	mutex_unlock(&indio_dev->mlock);
+
+	return 0;
+}
+
+static const int ad5755_min_max_table[][2] = {
+	[AD5755_MODE_VOLTAGE_0V_5V] = { 0, 5000 },
+	[AD5755_MODE_VOLTAGE_0V_10V] = { 0, 10000 },
+	[AD5755_MODE_VOLTAGE_PLUSMINUS_5V] = { -5000, 5000 },
+	[AD5755_MODE_VOLTAGE_PLUSMINUS_10V] = { -10000, 10000 },
+	[AD5755_MODE_CURRENT_4mA_20mA] = { 4, 20 },
+	[AD5755_MODE_CURRENT_0mA_20mA] = { 0, 20 },
+	[AD5755_MODE_CURRENT_0mA_24mA] = { 0, 24 },
+};
+
+static void ad5755_get_min_max(struct ad5755_state *st,
+	struct iio_chan_spec const *chan, int *min, int *max)
+{
+	enum ad5755_mode mode = st->ctrl[chan->channel] & 7;
+	*min = ad5755_min_max_table[mode][0];
+	*max = ad5755_min_max_table[mode][1];
+}
+
+static inline int ad5755_get_offset(struct ad5755_state *st,
+	struct iio_chan_spec const *chan)
+{
+	int min, max;
+
+	ad5755_get_min_max(st, chan, &min, &max);
+	return (min * (1 << chan->scan_type.realbits)) / (max - min);
+}
+
+static inline int ad5755_get_scale(struct ad5755_state *st,
+	struct iio_chan_spec const *chan)
+{
+	int min, max;
+
+	ad5755_get_min_max(st, chan, &min, &max);
+	return ((max - min) * 1000000000ULL) >> chan->scan_type.realbits;
+}
+
+static int ad5755_chan_reg_info(struct ad5755_state *st,
+	struct iio_chan_spec const *chan, long info, bool write,
+	unsigned int *reg, unsigned int *shift, unsigned int *offset)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		if (write)
+			*reg = AD5755_WRITE_REG_DATA(chan->address);
+		else
+			*reg = AD5755_READ_REG_DATA(chan->address);
+		*shift = chan->scan_type.shift;
+		*offset = 0;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (write)
+			*reg = AD5755_WRITE_REG_OFFSET(chan->address);
+		else
+			*reg = AD5755_READ_REG_OFFSET(chan->address);
+		*shift = st->chip_info->calib_shift;
+		*offset = 32768;
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (write)
+			*reg =  AD5755_WRITE_REG_GAIN(chan->address);
+		else
+			*reg =  AD5755_READ_REG_GAIN(chan->address);
+		*shift = st->chip_info->calib_shift;
+		*offset = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ad5755_read_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *val, int *val2, long info)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+	unsigned int reg, shift, offset;
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = ad5755_get_scale(st, chan);
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = ad5755_get_offset(st, chan);
+		return IIO_VAL_INT;
+	default:
+		ret = ad5755_chan_reg_info(st, chan, info, false,
+						&reg, &shift, &offset);
+		if (ret)
+			return ret;
+
+		ret = ad5755_read(indio_dev, reg);
+		if (ret < 0)
+			return ret;
+
+		*val = (ret - offset) >> shift;
+
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static int ad5755_write_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int val, int val2, long info)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+	unsigned int shift, reg, offset;
+	int ret;
+
+	ret = ad5755_chan_reg_info(st, chan, info, true,
+					&reg, &shift, &offset);
+	if (ret)
+		return ret;
+
+	val <<= shift;
+	val += offset;
+
+	if (val < 0 || val > 0xffff)
+		return -EINVAL;
+
+	return ad5755_write(indio_dev, reg, val);
+}
+
+static ssize_t ad5755_read_powerdown(struct iio_dev *indio_dev, uintptr_t priv,
+	const struct iio_chan_spec *chan, char *buf)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n",
+		       (bool)(st->pwr_down & (1 << chan->channel)));
+}
+
+static ssize_t ad5755_write_powerdown(struct iio_dev *indio_dev, uintptr_t priv,
+	struct iio_chan_spec const *chan, const char *buf, size_t len)
+{
+	bool pwr_down;
+	int ret;
+
+	ret = strtobool(buf, &pwr_down);
+	if (ret)
+		return ret;
+
+	ret = ad5755_set_channel_pwr_down(indio_dev, chan->channel, pwr_down);
+	return ret ? ret : len;
+}
+
+static const struct iio_info ad5755_info = {
+	.read_raw = ad5755_read_raw,
+	.write_raw = ad5755_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static const struct iio_chan_spec_ext_info ad5755_ext_info[] = {
+	{
+		.name = "powerdown",
+		.read = ad5755_read_powerdown,
+		.write = ad5755_write_powerdown,
+	},
+	{ },
+};
+
+#define AD5755_CHANNEL(_bits) {					\
+	.indexed = 1,						\
+	.output = 1,						\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,		\
+	.scan_type = IIO_ST('u', (_bits), 16, 16 - (_bits)),	\
+	.ext_info = ad5755_ext_info,				\
+}
+
+static const struct ad5755_chip_info ad5755_chip_info_tbl[] = {
+	[ID_AD5735] = {
+		.channel_template = AD5755_CHANNEL(14),
+		.has_voltage_out = true,
+		.calib_shift = 4,
+	},
+	[ID_AD5737] = {
+		.channel_template = AD5755_CHANNEL(14),
+		.has_voltage_out = false,
+		.calib_shift = 4,
+	},
+	[ID_AD5755] = {
+		.channel_template = AD5755_CHANNEL(16),
+		.has_voltage_out = true,
+		.calib_shift = 0,
+	},
+	[ID_AD5757] = {
+		.channel_template = AD5755_CHANNEL(16),
+		.has_voltage_out = false,
+		.calib_shift = 0,
+	},
+};
+
+static bool ad5755_is_valid_mode(struct ad5755_state *st, enum ad5755_mode mode)
+{
+	switch (mode) {
+	case AD5755_MODE_VOLTAGE_0V_5V:
+	case AD5755_MODE_VOLTAGE_0V_10V:
+	case AD5755_MODE_VOLTAGE_PLUSMINUS_5V:
+	case AD5755_MODE_VOLTAGE_PLUSMINUS_10V:
+		return st->chip_info->has_voltage_out;
+	case AD5755_MODE_CURRENT_4mA_20mA:
+	case AD5755_MODE_CURRENT_0mA_20mA:
+	case AD5755_MODE_CURRENT_0mA_24mA:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int __devinit ad5755_setup_pdata(struct iio_dev *indio_dev,
+	const struct ad5755_platform_data *pdata)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+	unsigned int val;
+	unsigned int i;
+	int ret;
+
+	if (pdata->dc_dc_phase > AD5755_DC_DC_PHASE_90_DEGREE ||
+		pdata->dc_dc_freq > AD5755_DC_DC_FREQ_650kHZ ||
+		pdata->dc_dc_maxv > AD5755_DC_DC_MAXV_29V5)
+		return -EINVAL;
+
+	val = pdata->dc_dc_maxv << AD5755_DC_DC_MAXV;
+	val |= pdata->dc_dc_freq << AD5755_DC_DC_FREQ_SHIFT;
+	val |= pdata->dc_dc_phase << AD5755_DC_DC_PHASE_SHIFT;
+	if (pdata->ext_dc_dc_compenstation_resistor)
+		val |= AD5755_EXT_DC_DC_COMP_RES;
+
+	ret = ad5755_write_ctrl(indio_dev, 0, AD5755_CTRL_REG_DC_DC, val);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(pdata->dac); ++i) {
+		val = pdata->dac[i].slew.step_size <<
+			AD5755_SLEW_STEP_SIZE_SHIFT;
+		val |= pdata->dac[i].slew.rate <<
+			AD5755_SLEW_RATE_SHIFT;
+		if (pdata->dac[i].slew.enable)
+			val |= AD5755_SLEW_ENABLE;
+
+		ret = ad5755_write_ctrl(indio_dev, i,
+					AD5755_CTRL_REG_SLEW, val);
+		if (ret < 0)
+			return ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pdata->dac); ++i) {
+		if (!ad5755_is_valid_mode(st, pdata->dac[i].mode))
+			return -EINVAL;
+
+		val = 0;
+		if (!pdata->dac[i].ext_current_sense_resistor)
+			val |= AD5755_DAC_INT_CURRENT_SENSE_RESISTOR;
+		if (pdata->dac[i].enable_voltage_overrange)
+			val |= AD5755_DAC_VOLTAGE_OVERRANGE_EN;
+		val |= pdata->dac[i].mode;
+
+		ret = ad5755_update_dac_ctrl(indio_dev, i, val, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static bool __devinit ad5755_is_voltage_mode(enum ad5755_mode mode)
+{
+	switch (mode) {
+	case AD5755_MODE_VOLTAGE_0V_5V:
+	case AD5755_MODE_VOLTAGE_0V_10V:
+	case AD5755_MODE_VOLTAGE_PLUSMINUS_5V:
+	case AD5755_MODE_VOLTAGE_PLUSMINUS_10V:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int __devinit ad5755_init_channels(struct iio_dev *indio_dev,
+	const struct ad5755_platform_data *pdata)
+{
+	struct ad5755_state *st = iio_priv(indio_dev);
+	struct iio_chan_spec *channels = st->channels;
+	unsigned int i;
+
+	for (i = 0; i < AD5755_NUM_CHANNELS; ++i) {
+		channels[i] = st->chip_info->channel_template;
+		channels[i].channel = i;
+		channels[i].address = i;
+		if (pdata && ad5755_is_voltage_mode(pdata->dac[i].mode))
+			channels[i].type = IIO_VOLTAGE;
+		else
+			channels[i].type = IIO_CURRENT;
+	}
+
+	indio_dev->channels = channels;
+
+	return 0;
+}
+
+#define AD5755_DEFAULT_DAC_PDATA { \
+		.mode = AD5755_MODE_CURRENT_4mA_20mA, \
+		.ext_current_sense_resistor = true, \
+		.enable_voltage_overrange = false, \
+		.slew = { \
+			.enable = false, \
+			.rate = AD5755_SLEW_RATE_64k, \
+			.step_size = AD5755_SLEW_STEP_SIZE_1, \
+		}, \
+	}
+
+static const struct ad5755_platform_data ad5755_default_pdata = {
+	.ext_dc_dc_compenstation_resistor = false,
+	.dc_dc_phase = AD5755_DC_DC_PHASE_ALL_SAME_EDGE,
+	.dc_dc_freq = AD5755_DC_DC_FREQ_410kHZ,
+	.dc_dc_maxv = AD5755_DC_DC_MAXV_23V,
+	.dac = {
+		[0] = AD5755_DEFAULT_DAC_PDATA,
+		[1] = AD5755_DEFAULT_DAC_PDATA,
+		[2] = AD5755_DEFAULT_DAC_PDATA,
+		[3] = AD5755_DEFAULT_DAC_PDATA,
+	},
+};
+
+static int __devinit ad5755_probe(struct spi_device *spi)
+{
+	enum ad5755_type type = spi_get_device_id(spi)->driver_data;
+	const struct ad5755_platform_data *pdata = dev_get_platdata(&spi->dev);
+	struct iio_dev *indio_dev;
+	struct ad5755_state *st;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (indio_dev == NULL) {
+		dev_err(&spi->dev, "Failed to allocate iio device\n");
+		return  -ENOMEM;
+	}
+
+	st = iio_priv(indio_dev);
+	spi_set_drvdata(spi, indio_dev);
+
+	st->chip_info = &ad5755_chip_info_tbl[type];
+	st->spi = spi;
+	st->pwr_down = 0xf;
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->info = &ad5755_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->num_channels = AD5755_NUM_CHANNELS;
+
+	if (!pdata)
+		pdata = &ad5755_default_pdata;
+
+	ret = ad5755_init_channels(indio_dev, pdata);
+	if (ret)
+		goto error_free;
+
+	ret = ad5755_setup_pdata(indio_dev, pdata);
+	if (ret)
+		goto error_free;
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to register iio device: %d\n", ret);
+		goto error_free;
+	}
+
+	return 0;
+
+error_free:
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int __devexit ad5755_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+	iio_device_unregister(indio_dev);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id ad5755_id[] = {
+	{ "ad5755", ID_AD5755 },
+	{ "ad5755-1", ID_AD5755 },
+	{ "ad5757", ID_AD5757 },
+	{ "ad5735", ID_AD5735 },
+	{ "ad5737", ID_AD5737 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad5755_id);
+
+static struct spi_driver ad5755_driver = {
+	.driver = {
+		.name = "ad5755",
+		.owner = THIS_MODULE,
+	},
+	.probe = ad5755_probe,
+	.remove = __devexit_p(ad5755_remove),
+	.id_table = ad5755_id,
+};
+module_spi_driver(ad5755_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices AD5755/55-1/57/35/37 DAC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
new file mode 100644
index 00000000000..21e27e2fc68
--- /dev/null
+++ b/drivers/iio/gyro/Kconfig
@@ -0,0 +1,16 @@
+#
+# IIO Digital Gyroscope Sensor drivers configuration
+#
+menu "Digital gyroscope sensors"
+
+config HID_SENSOR_GYRO_3D
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	tristate "HID Gyroscope 3D"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Gyroscope 3D.
+
+endmenu
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
new file mode 100644
index 00000000000..8a895d9fcbc
--- /dev/null
+++ b/drivers/iio/gyro/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for industrial I/O gyroscope sensor drivers
+#
+
+obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
new file mode 100644
index 00000000000..4c56ada51c3
--- /dev/null
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -0,0 +1,418 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include "../common/hid-sensors/hid-sensor-attributes.h"
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+/*Format: HID-SENSOR-usage_id_in_hex*/
+/*Usage ID from spec for Gyro-3D: 0x200076*/
+#define DRIVER_NAME "HID-SENSOR-200076"
+
+enum gyro_3d_channel {
+	CHANNEL_SCAN_INDEX_X,
+	CHANNEL_SCAN_INDEX_Y,
+	CHANNEL_SCAN_INDEX_Z,
+	GYRO_3D_CHANNEL_MAX,
+};
+
+struct gyro_3d_state {
+	struct hid_sensor_hub_callbacks callbacks;
+	struct hid_sensor_iio_common common_attributes;
+	struct hid_sensor_hub_attribute_info gyro[GYRO_3D_CHANNEL_MAX];
+	u32 gyro_val[GYRO_3D_CHANNEL_MAX];
+};
+
+static const u32 gyro_3d_addresses[GYRO_3D_CHANNEL_MAX] = {
+	HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS,
+	HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS,
+	HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec gyro_3d_channels[] = {
+	{
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_X,
+	}, {
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_Y,
+	}, {
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_Z,
+	}
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void gyro_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+						int channel, int size)
+{
+	channels[channel].scan_type.sign = 's';
+	/* Real storage bits will change based on the report desc. */
+	channels[channel].scan_type.realbits = size * 8;
+	/* Maximum size of a sample to capture is u32 */
+	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
+}
+
+/* Channel read_raw handler */
+static int gyro_3d_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+	int report_id = -1;
+	u32 address;
+	int ret;
+	int ret_type;
+
+	*val = 0;
+	*val2 = 0;
+	switch (mask) {
+	case 0:
+		report_id = gyro_state->gyro[chan->scan_index].report_id;
+		address = gyro_3d_addresses[chan->scan_index];
+		if (report_id >= 0)
+			*val = sensor_hub_input_attr_get_raw_value(
+				gyro_state->common_attributes.hsdev,
+				HID_USAGE_SENSOR_GYRO_3D, address,
+				report_id);
+		else {
+			*val = 0;
+			return -EINVAL;
+		}
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = gyro_state->gyro[CHANNEL_SCAN_INDEX_X].units;
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = hid_sensor_convert_exponent(
+			gyro_state->gyro[CHANNEL_SCAN_INDEX_X].unit_expo);
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_read_samp_freq_value(
+			&gyro_state->common_attributes, val, val2);
+			ret_type = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_read_raw_hyst_value(
+			&gyro_state->common_attributes, val, val2);
+		ret_type = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret_type = -EINVAL;
+		break;
+	}
+
+	return ret_type;
+}
+
+/* Channel write_raw handler */
+static int gyro_3d_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_write_samp_freq_value(
+				&gyro_state->common_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_write_raw_hyst_value(
+				&gyro_state->common_attributes, val, val2);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int gyro_3d_write_raw_get_fmt(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       long mask)
+{
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static const struct iio_info gyro_3d_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &gyro_3d_read_raw,
+	.write_raw = &gyro_3d_write_raw,
+	.write_raw_get_fmt = &gyro_3d_write_raw_get_fmt,
+};
+
+/* Function to push data to buffer */
+static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
+	int datum_sz;
+
+	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
+	if (!buffer) {
+		dev_err(&indio_dev->dev, "Buffer == NULL\n");
+		return;
+	}
+	datum_sz = buffer->access->get_bytes_per_datum(buffer);
+	if (len > datum_sz) {
+		dev_err(&indio_dev->dev, "Datum size mismatch %d:%d\n", len,
+				datum_sz);
+		return;
+	}
+	iio_push_to_buffer(buffer, (u8 *)data);
+}
+
+/* Callback handler to send event after all samples are received and captured */
+static int gyro_3d_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+
+	dev_dbg(&indio_dev->dev, "gyro_3d_proc_event [%d]\n",
+				gyro_state->common_attributes.data_ready);
+	if (gyro_state->common_attributes.data_ready)
+		hid_sensor_push_data(indio_dev,
+				(u8 *)gyro_state->gyro_val,
+				sizeof(gyro_state->gyro_val));
+
+	return 0;
+}
+
+/* Capture samples in local storage */
+static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				size_t raw_len, char *raw_data,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+	int offset;
+	int ret = -EINVAL;
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS:
+	case HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS:
+	case HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS:
+		offset = usage_id - HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS;
+		gyro_state->gyro_val[CHANNEL_SCAN_INDEX_X + offset] =
+						*(u32 *)raw_data;
+		ret = 0;
+	break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/* Parse report which is specific to an usage id*/
+static int gyro_3d_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				struct iio_chan_spec *channels,
+				unsigned usage_id,
+				struct gyro_3d_state *st)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
+		ret = sensor_hub_input_get_attribute_info(hsdev,
+				HID_INPUT_REPORT,
+				usage_id,
+				HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + i,
+				&st->gyro[CHANNEL_SCAN_INDEX_X + i]);
+		if (ret < 0)
+			break;
+		gyro_3d_adjust_channel_bit_mask(channels,
+				CHANNEL_SCAN_INDEX_X + i,
+				st->gyro[CHANNEL_SCAN_INDEX_X + i].size);
+	}
+	dev_dbg(&pdev->dev, "gyro_3d %x:%x, %x:%x, %x:%x\n",
+			st->gyro[0].index,
+			st->gyro[0].report_id,
+			st->gyro[1].index, st->gyro[1].report_id,
+			st->gyro[2].index, st->gyro[2].report_id);
+
+	return ret;
+}
+
+/* Function to initialize the processing for usage id */
+static int __devinit hid_gyro_3d_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	static const char *name = "gyro_3d";
+	struct iio_dev *indio_dev;
+	struct gyro_3d_state *gyro_state;
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_chan_spec *channels;
+
+	indio_dev = iio_device_alloc(sizeof(struct gyro_3d_state));
+	if (indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	platform_set_drvdata(pdev, indio_dev);
+
+	gyro_state = iio_priv(indio_dev);
+	gyro_state->common_attributes.hsdev = hsdev;
+	gyro_state->common_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev,
+						HID_USAGE_SENSOR_GYRO_3D,
+						&gyro_state->common_attributes);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup common attributes\n");
+		goto error_free_dev;
+	}
+
+	channels = kmemdup(gyro_3d_channels,
+					sizeof(gyro_3d_channels),
+					GFP_KERNEL);
+	if (!channels) {
+		dev_err(&pdev->dev, "failed to duplicate channels\n");
+		goto error_free_dev;
+	}
+
+	ret = gyro_3d_parse_report(pdev, hsdev, channels,
+					HID_USAGE_SENSOR_GYRO_3D, gyro_state);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup attributes\n");
+		goto error_free_dev_mem;
+	}
+
+	indio_dev->channels = channels;
+	indio_dev->num_channels = ARRAY_SIZE(gyro_3d_channels);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &gyro_3d_info;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		NULL, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
+		goto error_free_dev_mem;
+	}
+	gyro_state->common_attributes.data_ready = false;
+	ret = hid_sensor_setup_trigger(indio_dev, name,
+					&gyro_state->common_attributes);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "trigger setup failed\n");
+		goto error_unreg_buffer_funcs;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "device register failed\n");
+		goto error_remove_trigger;
+	}
+
+	gyro_state->callbacks.send_event = gyro_3d_proc_event;
+	gyro_state->callbacks.capture_sample = gyro_3d_capture_sample;
+	gyro_state->callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D,
+					&gyro_state->callbacks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "callback reg failed\n");
+		goto error_iio_unreg;
+	}
+
+	return ret;
+
+error_iio_unreg:
+	iio_device_unregister(indio_dev);
+error_remove_trigger:
+	hid_sensor_remove_trigger(indio_dev);
+error_unreg_buffer_funcs:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_free_dev_mem:
+	kfree(indio_dev->channels);
+error_free_dev:
+	iio_device_free(indio_dev);
+error_ret:
+	return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int __devinit hid_gyro_3d_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
+	iio_device_unregister(indio_dev);
+	hid_sensor_remove_trigger(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	kfree(indio_dev->channels);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver hid_gyro_3d_platform_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= hid_gyro_3d_probe,
+	.remove		= hid_gyro_3d_remove,
+};
+module_platform_driver(hid_gyro_3d_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor Gyroscope 3D");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 4add9bb40ee..d4ad37455a6 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -422,7 +422,7 @@ ssize_t iio_buffer_store_enable(struct device *dev,
 			ret = indio_dev->setup_ops->preenable(indio_dev);
 			if (ret) {
 				printk(KERN_ERR
-				       "Buffer not started:"
+				       "Buffer not started: "
 				       "buffer preenable failed\n");
 				goto error_ret;
 			}
@@ -431,12 +431,12 @@ ssize_t iio_buffer_store_enable(struct device *dev,
 			ret = buffer->access->request_update(buffer);
 			if (ret) {
 				printk(KERN_INFO
-				       "Buffer not started:"
+				       "Buffer not started: "
 				       "buffer parameter update failed\n");
 				goto error_ret;
 			}
 		}
-		/* Definitely possible for devices to support both of these.*/
+		/* Definitely possible for devices to support both of these. */
 		if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) {
 			if (!indio_dev->trig) {
 				printk(KERN_INFO
@@ -456,7 +456,7 @@ ssize_t iio_buffer_store_enable(struct device *dev,
 			ret = indio_dev->setup_ops->postenable(indio_dev);
 			if (ret) {
 				printk(KERN_INFO
-				       "Buffer not started:"
+				       "Buffer not started: "
 				       "postenable failed\n");
 				indio_dev->currentmode = previous_mode;
 				if (indio_dev->setup_ops->postdisable)
@@ -657,7 +657,7 @@ EXPORT_SYMBOL_GPL(iio_scan_mask_query);
 /**
  * struct iio_demux_table() - table describing demux memcpy ops
  * @from:	index to copy from
- * @to:	index to copy to
+ * @to:		index to copy to
  * @length:	how many bytes to copy
  * @l:		list head used for management
  */
@@ -682,12 +682,11 @@ static unsigned char *iio_demux(struct iio_buffer *buffer,
 	return buffer->demux_bounce;
 }
 
-int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data,
-		       s64 timestamp)
+int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data)
 {
 	unsigned char *dataout = iio_demux(buffer, data);
 
-	return buffer->access->store_to(buffer, dataout, timestamp);
+	return buffer->access->store_to(buffer, dataout);
 }
 EXPORT_SYMBOL_GPL(iio_push_to_buffer);
 
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 2ec266ef41a..6eb24dbc081 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -29,7 +29,7 @@
 #include <linux/iio/sysfs.h>
 #include <linux/iio/events.h>
 
-/* IDA to assign each registered device a unique id*/
+/* IDA to assign each registered device a unique id */
 static DEFINE_IDA(iio_ida);
 
 static dev_t iio_devt;
@@ -99,6 +99,7 @@ static const char * const iio_chan_info_postfix[] = {
 	[IIO_CHAN_INFO_FREQUENCY] = "frequency",
 	[IIO_CHAN_INFO_PHASE] = "phase",
 	[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",
+	[IIO_CHAN_INFO_HYSTERESIS] = "hysteresis",
 };
 
 const struct iio_chan_spec
@@ -365,6 +366,7 @@ static ssize_t iio_read_channel_info(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	unsigned long long tmp;
 	int val, val2;
 	bool scale_db = false;
 	int ret = indio_dev->info->read_raw(indio_dev, this_attr->c,
@@ -390,6 +392,11 @@ static ssize_t iio_read_channel_info(struct device *dev,
 			return sprintf(buf, "-%d.%09u\n", val, -val2);
 		else
 			return sprintf(buf, "%d.%09u\n", val, val2);
+	case IIO_VAL_FRACTIONAL:
+		tmp = div_s64((s64)val * 1000000000LL, val2);
+		val2 = do_div(tmp, 1000000000LL);
+		val = tmp;
+		return sprintf(buf, "%d.%09u\n", val, val2);
 	default:
 		return 0;
 	}
@@ -729,7 +736,7 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
 	attrcount = attrcount_orig;
 	/*
 	 * New channel registration method - relies on the fact a group does
-	 * not need to be initialized if it is name is NULL.
+	 * not need to be initialized if its name is NULL.
 	 */
 	if (indio_dev->channels)
 		for (i = 0; i < indio_dev->num_channels; i++) {
@@ -980,6 +987,6 @@ EXPORT_SYMBOL(iio_device_unregister);
 subsys_initcall(iio_init);
 module_exit(iio_exit);
 
-MODULE_AUTHOR("Jonathan Cameron <jic23@cam.ac.uk>");
+MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
 MODULE_DESCRIPTION("Industrial I/O core");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index b5afc2ff34f..f2b78d4fe45 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -111,6 +111,7 @@ struct iio_channel *iio_channel_get(const char *name, const char *channel_name)
 {
 	struct iio_map_internal *c_i = NULL, *c = NULL;
 	struct iio_channel *channel;
+	int err;
 
 	if (name == NULL && channel_name == NULL)
 		return ERR_PTR(-ENODEV);
@@ -130,18 +131,32 @@ struct iio_channel *iio_channel_get(const char *name, const char *channel_name)
 	if (c == NULL)
 		return ERR_PTR(-ENODEV);
 
-	channel = kmalloc(sizeof(*channel), GFP_KERNEL);
-	if (channel == NULL)
-		return ERR_PTR(-ENOMEM);
+	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+	if (channel == NULL) {
+		err = -ENOMEM;
+		goto error_no_mem;
+	}
 
 	channel->indio_dev = c->indio_dev;
 
-	if (c->map->adc_channel_label)
+	if (c->map->adc_channel_label) {
 		channel->channel =
 			iio_chan_spec_from_name(channel->indio_dev,
 						c->map->adc_channel_label);
 
+		if (channel->channel == NULL) {
+			err = -EINVAL;
+			goto error_no_chan;
+		}
+	}
+
 	return channel;
+
+error_no_chan:
+	kfree(channel);
+error_no_mem:
+	iio_device_put(c->indio_dev);
+	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(iio_channel_get);
 
@@ -229,9 +244,21 @@ void iio_channel_release_all(struct iio_channel *channels)
 }
 EXPORT_SYMBOL_GPL(iio_channel_release_all);
 
+static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
+	enum iio_chan_info_enum info)
+{
+	int unused;
+
+	if (val2 == NULL)
+		val2 = &unused;
+
+	return chan->indio_dev->info->read_raw(chan->indio_dev, chan->channel,
+						val, val2, info);
+}
+
 int iio_read_channel_raw(struct iio_channel *chan, int *val)
 {
-	int val2, ret;
+	int ret;
 
 	mutex_lock(&chan->indio_dev->info_exist_lock);
 	if (chan->indio_dev->info == NULL) {
@@ -239,8 +266,7 @@ int iio_read_channel_raw(struct iio_channel *chan, int *val)
 		goto err_unlock;
 	}
 
-	ret = chan->indio_dev->info->read_raw(chan->indio_dev, chan->channel,
-					      val, &val2, 0);
+	ret = iio_channel_read(chan, val, NULL, IIO_CHAN_INFO_RAW);
 err_unlock:
 	mutex_unlock(&chan->indio_dev->info_exist_lock);
 
@@ -248,6 +274,100 @@ err_unlock:
 }
 EXPORT_SYMBOL_GPL(iio_read_channel_raw);
 
+static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
+	int raw, int *processed, unsigned int scale)
+{
+	int scale_type, scale_val, scale_val2, offset;
+	s64 raw64 = raw;
+	int ret;
+
+	ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_SCALE);
+	if (ret == 0)
+		raw64 += offset;
+
+	scale_type = iio_channel_read(chan, &scale_val, &scale_val2,
+					IIO_CHAN_INFO_SCALE);
+	if (scale_type < 0)
+		return scale_type;
+
+	switch (scale_type) {
+	case IIO_VAL_INT:
+		*processed = raw64 * scale_val;
+		break;
+	case IIO_VAL_INT_PLUS_MICRO:
+		if (scale_val2 < 0)
+			*processed = -raw64 * scale_val;
+		else
+			*processed = raw64 * scale_val;
+		*processed += div_s64(raw64 * (s64)scale_val2 * scale,
+				      1000000LL);
+		break;
+	case IIO_VAL_INT_PLUS_NANO:
+		if (scale_val2 < 0)
+			*processed = -raw64 * scale_val;
+		else
+			*processed = raw64 * scale_val;
+		*processed += div_s64(raw64 * (s64)scale_val2 * scale,
+				      1000000000LL);
+		break;
+	case IIO_VAL_FRACTIONAL:
+		*processed = div_s64(raw64 * (s64)scale_val * scale,
+				     scale_val2);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
+	int *processed, unsigned int scale)
+{
+	int ret;
+
+	mutex_lock(&chan->indio_dev->info_exist_lock);
+	if (chan->indio_dev->info == NULL) {
+		ret = -ENODEV;
+		goto err_unlock;
+	}
+
+	ret = iio_convert_raw_to_processed_unlocked(chan, raw, processed,
+							scale);
+err_unlock:
+	mutex_unlock(&chan->indio_dev->info_exist_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iio_convert_raw_to_processed);
+
+int iio_read_channel_processed(struct iio_channel *chan, int *val)
+{
+	int ret;
+
+	mutex_lock(&chan->indio_dev->info_exist_lock);
+	if (chan->indio_dev->info == NULL) {
+		ret = -ENODEV;
+		goto err_unlock;
+	}
+
+	if (iio_channel_has_info(chan->channel, IIO_CHAN_INFO_PROCESSED)) {
+		ret = iio_channel_read(chan, val, NULL,
+				       IIO_CHAN_INFO_PROCESSED);
+	} else {
+		ret = iio_channel_read(chan, val, NULL, IIO_CHAN_INFO_RAW);
+		if (ret < 0)
+			goto err_unlock;
+		ret = iio_convert_raw_to_processed_unlocked(chan, *val, val, 1);
+	}
+
+err_unlock:
+	mutex_unlock(&chan->indio_dev->info_exist_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iio_read_channel_processed);
+
 int iio_read_channel_scale(struct iio_channel *chan, int *val, int *val2)
 {
 	int ret;
@@ -258,10 +378,7 @@ int iio_read_channel_scale(struct iio_channel *chan, int *val, int *val2)
 		goto err_unlock;
 	}
 
-	ret = chan->indio_dev->info->read_raw(chan->indio_dev,
-					      chan->channel,
-					      val, val2,
-					      IIO_CHAN_INFO_SCALE);
+	ret = iio_channel_read(chan, val, val2, IIO_CHAN_INFO_SCALE);
 err_unlock:
 	mutex_unlock(&chan->indio_dev->info_exist_lock);
 
diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
index 6bf9d05f484..5bc5c860e9c 100644
--- a/drivers/iio/kfifo_buf.c
+++ b/drivers/iio/kfifo_buf.c
@@ -6,6 +6,7 @@
 #include <linux/kfifo.h>
 #include <linux/mutex.h>
 #include <linux/iio/kfifo_buf.h>
+#include <linux/sched.h>
 
 struct iio_kfifo {
 	struct iio_buffer buffer;
@@ -22,7 +23,8 @@ static inline int __iio_allocate_kfifo(struct iio_kfifo *buf,
 		return -EINVAL;
 
 	__iio_update_buffer(&buf->buffer, bytes_per_datum, length);
-	return kfifo_alloc(&buf->kf, bytes_per_datum*length, GFP_KERNEL);
+	return __kfifo_alloc((struct __kfifo *)&buf->kf, length,
+			     bytes_per_datum, GFP_KERNEL);
 }
 
 static int iio_request_update_kfifo(struct iio_buffer *r)
@@ -35,6 +37,7 @@ static int iio_request_update_kfifo(struct iio_buffer *r)
 	kfifo_free(&buf->kf);
 	ret = __iio_allocate_kfifo(buf, buf->buffer.bytes_per_datum,
 				   buf->buffer.length);
+	r->stufftoread = false;
 error_ret:
 	return ret;
 }
@@ -81,6 +84,9 @@ static int iio_set_bytes_per_datum_kfifo(struct iio_buffer *r, size_t bpd)
 
 static int iio_set_length_kfifo(struct iio_buffer *r, int length)
 {
+	/* Avoid an invalid state */
+	if (length < 2)
+		length = 2;
 	if (r->length != length) {
 		r->length = length;
 		iio_mark_update_needed_kfifo(r);
@@ -89,14 +95,16 @@ static int iio_set_length_kfifo(struct iio_buffer *r, int length)
 }
 
 static int iio_store_to_kfifo(struct iio_buffer *r,
-			      u8 *data,
-			      s64 timestamp)
+			      u8 *data)
 {
 	int ret;
 	struct iio_kfifo *kf = iio_to_kfifo(r);
-	ret = kfifo_in(&kf->kf, data, r->bytes_per_datum);
-	if (ret != r->bytes_per_datum)
+	ret = kfifo_in(&kf->kf, data, 1);
+	if (ret != 1)
 		return -EBUSY;
+	r->stufftoread = true;
+	wake_up_interruptible(&r->pollq);
+
 	return 0;
 }
 
@@ -106,11 +114,18 @@ static int iio_read_first_n_kfifo(struct iio_buffer *r,
 	int ret, copied;
 	struct iio_kfifo *kf = iio_to_kfifo(r);
 
-	if (n < r->bytes_per_datum)
+	if (n < r->bytes_per_datum || r->bytes_per_datum == 0)
 		return -EINVAL;
 
-	n = rounddown(n, r->bytes_per_datum);
 	ret = kfifo_to_user(&kf->kf, buf, n, &copied);
+	if (ret < 0)
+		return ret;
+
+	if (kfifo_is_empty(&kf->kf))
+		r->stufftoread = false;
+	/* verify it is still empty to avoid race */
+	if (!kfifo_is_empty(&kf->kf))
+		r->stufftoread = true;
 
 	return copied;
 }
@@ -136,7 +151,7 @@ struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev)
 	iio_buffer_init(&kf->buffer);
 	kf->buffer.attrs = &iio_kfifo_attribute_group;
 	kf->buffer.access = &kfifo_access_funcs;
-
+	kf->buffer.length = 2;
 	return &kf->buffer;
 }
 EXPORT_SYMBOL(iio_kfifo_allocate);
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 91d15d2f694..1763c9bcb98 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -42,4 +42,14 @@ config VCNL4000
 	 To compile this driver as a module, choose M here: the
 	 module will be called vcnl4000.
 
+config HID_SENSOR_ALS
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	tristate "HID ALS"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Ambient light sensor.
+
 endmenu
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 13f8a782d29..21a8f0df140 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -5,3 +5,4 @@
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
+obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c
index 9a99f43094f..164b62b91a4 100644
--- a/drivers/iio/light/adjd_s311.c
+++ b/drivers/iio/light/adjd_s311.c
@@ -187,7 +187,7 @@ static irqreturn_t adjd_s311_trigger_handler(int irq, void *p)
 	if (indio_dev->scan_timestamp)
 		*(s64 *)((u8 *)data->buffer + ALIGN(len, sizeof(s64)))
 			= time_ns;
-	iio_push_to_buffer(buffer, (u8 *)data->buffer, time_ns);
+	iio_push_to_buffer(buffer, (u8 *)data->buffer);
 
 done:
 	iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
new file mode 100644
index 00000000000..96e3691e42c
--- /dev/null
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -0,0 +1,385 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include "../common/hid-sensors/hid-sensor-attributes.h"
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+/*Format: HID-SENSOR-usage_id_in_hex*/
+/*Usage ID from spec for Accelerometer-3D: 0x200041*/
+#define DRIVER_NAME "HID-SENSOR-200041"
+
+#define CHANNEL_SCAN_INDEX_ILLUM 0
+
+struct als_state {
+	struct hid_sensor_hub_callbacks callbacks;
+	struct hid_sensor_iio_common common_attributes;
+	struct hid_sensor_hub_attribute_info als_illum;
+	u32 illum;
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec als_channels[] = {
+	{
+		.type = IIO_INTENSITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_ILLUM,
+	}
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void als_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+					int channel, int size)
+{
+	channels[channel].scan_type.sign = 's';
+	/* Real storage bits will change based on the report desc. */
+	channels[channel].scan_type.realbits = size * 8;
+	/* Maximum size of a sample to capture is u32 */
+	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
+}
+
+/* Channel read_raw handler */
+static int als_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	struct als_state *als_state = iio_priv(indio_dev);
+	int report_id = -1;
+	u32 address;
+	int ret;
+	int ret_type;
+
+	*val = 0;
+	*val2 = 0;
+	switch (mask) {
+	case 0:
+		switch (chan->scan_index) {
+		case  CHANNEL_SCAN_INDEX_ILLUM:
+			report_id = als_state->als_illum.report_id;
+			address =
+			HID_USAGE_SENSOR_LIGHT_ILLUM;
+			break;
+		default:
+			report_id = -1;
+			break;
+		}
+		if (report_id >= 0)
+			*val = sensor_hub_input_attr_get_raw_value(
+				als_state->common_attributes.hsdev,
+				HID_USAGE_SENSOR_ALS, address,
+				report_id);
+		else {
+			*val = 0;
+			return -EINVAL;
+		}
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = als_state->als_illum.units;
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = hid_sensor_convert_exponent(
+				als_state->als_illum.unit_expo);
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_read_samp_freq_value(
+				&als_state->common_attributes, val, val2);
+		ret_type = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_read_raw_hyst_value(
+				&als_state->common_attributes, val, val2);
+		ret_type = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret_type = -EINVAL;
+		break;
+	}
+
+	return ret_type;
+}
+
+/* Channel write_raw handler */
+static int als_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct als_state *als_state = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_write_samp_freq_value(
+				&als_state->common_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_write_raw_hyst_value(
+				&als_state->common_attributes, val, val2);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int als_write_raw_get_fmt(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       long mask)
+{
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static const struct iio_info als_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &als_read_raw,
+	.write_raw = &als_write_raw,
+	.write_raw_get_fmt = &als_write_raw_get_fmt,
+};
+
+/* Function to push data to buffer */
+static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
+	int datum_sz;
+
+	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
+	if (!buffer) {
+		dev_err(&indio_dev->dev, "Buffer == NULL\n");
+		return;
+	}
+	datum_sz = buffer->access->get_bytes_per_datum(buffer);
+	if (len > datum_sz) {
+		dev_err(&indio_dev->dev, "Datum size mismatch %d:%d\n", len,
+				datum_sz);
+		return;
+	}
+	iio_push_to_buffer(buffer, (u8 *)data);
+}
+
+/* Callback handler to send event after all samples are received and captured */
+static int als_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct als_state *als_state = iio_priv(indio_dev);
+
+	dev_dbg(&indio_dev->dev, "als_proc_event [%d]\n",
+				als_state->common_attributes.data_ready);
+	if (als_state->common_attributes.data_ready)
+		hid_sensor_push_data(indio_dev,
+				(u8 *)&als_state->illum,
+				sizeof(als_state->illum));
+
+	return 0;
+}
+
+/* Capture samples in local storage */
+static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				size_t raw_len, char *raw_data,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct als_state *als_state = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_LIGHT_ILLUM:
+		als_state->illum = *(u32 *)raw_data;
+		ret = 0;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/* Parse report which is specific to an usage id*/
+static int als_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				struct iio_chan_spec *channels,
+				unsigned usage_id,
+				struct als_state *st)
+{
+	int ret;
+
+	ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
+			usage_id,
+			HID_USAGE_SENSOR_LIGHT_ILLUM,
+			&st->als_illum);
+	if (ret < 0)
+		return ret;
+	als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_ILLUM,
+					st->als_illum.size);
+
+	dev_dbg(&pdev->dev, "als %x:%x\n", st->als_illum.index,
+			st->als_illum.report_id);
+
+	return ret;
+}
+
+/* Function to initialize the processing for usage id */
+static int __devinit hid_als_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	static const char *name = "als";
+	struct iio_dev *indio_dev;
+	struct als_state *als_state;
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_chan_spec *channels;
+
+	indio_dev = iio_device_alloc(sizeof(struct als_state));
+	if (indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	platform_set_drvdata(pdev, indio_dev);
+
+	als_state = iio_priv(indio_dev);
+	als_state->common_attributes.hsdev = hsdev;
+	als_state->common_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev, HID_USAGE_SENSOR_ALS,
+					&als_state->common_attributes);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup common attributes\n");
+		goto error_free_dev;
+	}
+
+	channels = kmemdup(als_channels,
+					sizeof(als_channels),
+					GFP_KERNEL);
+	if (!channels) {
+		dev_err(&pdev->dev, "failed to duplicate channels\n");
+		goto error_free_dev;
+	}
+
+	ret = als_parse_report(pdev, hsdev, channels,
+				HID_USAGE_SENSOR_ALS, als_state);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup attributes\n");
+		goto error_free_dev_mem;
+	}
+
+	indio_dev->channels = channels;
+	indio_dev->num_channels =
+				ARRAY_SIZE(als_channels);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &als_info;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		NULL, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
+		goto error_free_dev_mem;
+	}
+	als_state->common_attributes.data_ready = false;
+	ret = hid_sensor_setup_trigger(indio_dev, name,
+				&als_state->common_attributes);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "trigger setup failed\n");
+		goto error_unreg_buffer_funcs;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "device register failed\n");
+		goto error_remove_trigger;
+	}
+
+	als_state->callbacks.send_event = als_proc_event;
+	als_state->callbacks.capture_sample = als_capture_sample;
+	als_state->callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_ALS,
+					&als_state->callbacks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "callback reg failed\n");
+		goto error_iio_unreg;
+	}
+
+	return ret;
+
+error_iio_unreg:
+	iio_device_unregister(indio_dev);
+error_remove_trigger:
+	hid_sensor_remove_trigger(indio_dev);
+error_unreg_buffer_funcs:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_free_dev_mem:
+	kfree(indio_dev->channels);
+error_free_dev:
+	iio_device_free(indio_dev);
+error_ret:
+	return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int __devinit hid_als_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
+	iio_device_unregister(indio_dev);
+	hid_sensor_remove_trigger(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	kfree(indio_dev->channels);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver hid_als_platform_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= hid_als_probe,
+	.remove		= hid_als_remove,
+};
+module_platform_driver(hid_als_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor ALS");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
new file mode 100644
index 00000000000..c1f0cdd5703
--- /dev/null
+++ b/drivers/iio/magnetometer/Kconfig
@@ -0,0 +1,16 @@
+#
+# Magnetometer sensors
+#
+menu "Magnetometer sensors"
+
+config HID_SENSOR_MAGNETOMETER_3D
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	tristate "HID Magenetometer 3D"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Magnetometer 3D.
+
+endmenu
diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
new file mode 100644
index 00000000000..60dc4f2b196
--- /dev/null
+++ b/drivers/iio/magnetometer/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for industrial I/O Magnetometer sensor drivers
+#
+
+obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
new file mode 100644
index 00000000000..c4f0d274f57
--- /dev/null
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -0,0 +1,419 @@
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include "../common/hid-sensors/hid-sensor-attributes.h"
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+/*Format: HID-SENSOR-usage_id_in_hex*/
+/*Usage ID from spec for Magnetometer-3D: 0x200083*/
+#define DRIVER_NAME "HID-SENSOR-200083"
+
+enum magn_3d_channel {
+	CHANNEL_SCAN_INDEX_X,
+	CHANNEL_SCAN_INDEX_Y,
+	CHANNEL_SCAN_INDEX_Z,
+	MAGN_3D_CHANNEL_MAX,
+};
+
+struct magn_3d_state {
+	struct hid_sensor_hub_callbacks callbacks;
+	struct hid_sensor_iio_common common_attributes;
+	struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
+	u32 magn_val[MAGN_3D_CHANNEL_MAX];
+};
+
+static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
+	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS,
+	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS,
+	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec magn_3d_channels[] = {
+	{
+		.type = IIO_MAGN,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_X,
+	}, {
+		.type = IIO_MAGN,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_Y,
+	}, {
+		.type = IIO_MAGN,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT |
+		IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT,
+		.scan_index = CHANNEL_SCAN_INDEX_Z,
+	}
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void magn_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+						int channel, int size)
+{
+	channels[channel].scan_type.sign = 's';
+	/* Real storage bits will change based on the report desc. */
+	channels[channel].scan_type.realbits = size * 8;
+	/* Maximum size of a sample to capture is u32 */
+	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
+}
+
+/* Channel read_raw handler */
+static int magn_3d_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+	int report_id = -1;
+	u32 address;
+	int ret;
+	int ret_type;
+
+	*val = 0;
+	*val2 = 0;
+	switch (mask) {
+	case 0:
+		report_id =
+			magn_state->magn[chan->scan_index].report_id;
+		address = magn_3d_addresses[chan->scan_index];
+		if (report_id >= 0)
+			*val = sensor_hub_input_attr_get_raw_value(
+				magn_state->common_attributes.hsdev,
+				HID_USAGE_SENSOR_COMPASS_3D, address,
+				report_id);
+		else {
+			*val = 0;
+			return -EINVAL;
+		}
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = magn_state->magn[CHANNEL_SCAN_INDEX_X].units;
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = hid_sensor_convert_exponent(
+			magn_state->magn[CHANNEL_SCAN_INDEX_X].unit_expo);
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_read_samp_freq_value(
+			&magn_state->common_attributes, val, val2);
+		ret_type = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_read_raw_hyst_value(
+			&magn_state->common_attributes, val, val2);
+		ret_type = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret_type = -EINVAL;
+		break;
+	}
+
+	return ret_type;
+}
+
+/* Channel write_raw handler */
+static int magn_3d_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_write_samp_freq_value(
+				&magn_state->common_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->common_attributes, val, val2);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int magn_3d_write_raw_get_fmt(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       long mask)
+{
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static const struct iio_info magn_3d_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &magn_3d_read_raw,
+	.write_raw = &magn_3d_write_raw,
+	.write_raw_get_fmt = &magn_3d_write_raw_get_fmt,
+};
+
+/* Function to push data to buffer */
+static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
+	int datum_sz;
+
+	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
+	if (!buffer) {
+		dev_err(&indio_dev->dev, "Buffer == NULL\n");
+		return;
+	}
+	datum_sz = buffer->access->get_bytes_per_datum(buffer);
+	if (len > datum_sz) {
+		dev_err(&indio_dev->dev, "Datum size mismatch %d:%d\n", len,
+				datum_sz);
+		return;
+	}
+	iio_push_to_buffer(buffer, (u8 *)data);
+}
+
+/* Callback handler to send event after all samples are received and captured */
+static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+
+	dev_dbg(&indio_dev->dev, "magn_3d_proc_event [%d]\n",
+				magn_state->common_attributes.data_ready);
+	if (magn_state->common_attributes.data_ready)
+		hid_sensor_push_data(indio_dev,
+				(u8 *)magn_state->magn_val,
+				sizeof(magn_state->magn_val));
+
+	return 0;
+}
+
+/* Capture samples in local storage */
+static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				size_t raw_len, char *raw_data,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+	int offset;
+	int ret = -EINVAL;
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS:
+	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS:
+	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS:
+		offset = usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS;
+		magn_state->magn_val[CHANNEL_SCAN_INDEX_X + offset] =
+						*(u32 *)raw_data;
+		ret = 0;
+	break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/* Parse report which is specific to an usage id*/
+static int magn_3d_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				struct iio_chan_spec *channels,
+				unsigned usage_id,
+				struct magn_3d_state *st)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
+		ret = sensor_hub_input_get_attribute_info(hsdev,
+				HID_INPUT_REPORT,
+				usage_id,
+				HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS + i,
+				&st->magn[CHANNEL_SCAN_INDEX_X + i]);
+		if (ret < 0)
+			break;
+		magn_3d_adjust_channel_bit_mask(channels,
+				CHANNEL_SCAN_INDEX_X + i,
+				st->magn[CHANNEL_SCAN_INDEX_X + i].size);
+	}
+	dev_dbg(&pdev->dev, "magn_3d %x:%x, %x:%x, %x:%x\n",
+			st->magn[0].index,
+			st->magn[0].report_id,
+			st->magn[1].index, st->magn[1].report_id,
+			st->magn[2].index, st->magn[2].report_id);
+
+	return ret;
+}
+
+/* Function to initialize the processing for usage id */
+static int __devinit hid_magn_3d_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	static char *name = "magn_3d";
+	struct iio_dev *indio_dev;
+	struct magn_3d_state *magn_state;
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_chan_spec *channels;
+
+	indio_dev = iio_device_alloc(sizeof(struct magn_3d_state));
+	if (indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	platform_set_drvdata(pdev, indio_dev);
+
+	magn_state = iio_priv(indio_dev);
+	magn_state->common_attributes.hsdev = hsdev;
+	magn_state->common_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev,
+				HID_USAGE_SENSOR_COMPASS_3D,
+				&magn_state->common_attributes);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup common attributes\n");
+		goto error_free_dev;
+	}
+
+	channels = kmemdup(magn_3d_channels,
+					sizeof(magn_3d_channels),
+					GFP_KERNEL);
+	if (!channels) {
+		dev_err(&pdev->dev, "failed to duplicate channels\n");
+		goto error_free_dev;
+	}
+
+	ret = magn_3d_parse_report(pdev, hsdev, channels,
+				HID_USAGE_SENSOR_COMPASS_3D, magn_state);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup attributes\n");
+		goto error_free_dev_mem;
+	}
+
+	indio_dev->channels = channels;
+	indio_dev->num_channels = ARRAY_SIZE(magn_3d_channels);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &magn_3d_info;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		NULL, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
+		goto error_free_dev_mem;
+	}
+	magn_state->common_attributes.data_ready = false;
+	ret = hid_sensor_setup_trigger(indio_dev, name,
+					&magn_state->common_attributes);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "trigger setup failed\n");
+		goto error_unreg_buffer_funcs;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "device register failed\n");
+		goto error_remove_trigger;
+	}
+
+	magn_state->callbacks.send_event = magn_3d_proc_event;
+	magn_state->callbacks.capture_sample = magn_3d_capture_sample;
+	magn_state->callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D,
+					&magn_state->callbacks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "callback reg failed\n");
+		goto error_iio_unreg;
+	}
+
+	return ret;
+
+error_iio_unreg:
+	iio_device_unregister(indio_dev);
+error_remove_trigger:
+	hid_sensor_remove_trigger(indio_dev);
+error_unreg_buffer_funcs:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_free_dev_mem:
+	kfree(indio_dev->channels);
+error_free_dev:
+	iio_device_free(indio_dev);
+error_ret:
+	return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int __devinit hid_magn_3d_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
+	iio_device_unregister(indio_dev);
+	hid_sensor_remove_trigger(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	kfree(indio_dev->channels);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver hid_magn_3d_platform_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= hid_magn_3d_probe,
+	.remove		= hid_magn_3d_remove,
+};
+module_platform_driver(hid_magn_3d_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor Magnetometer 3D");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_LICENSE("GPL");