RDMA/amso1100: Add driver for Ammasso 1100 RNIC

Add a driver for the Ammasso 1100 gigabit ethernet RNIC.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 1255 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/amso1100/c2.c b/drivers/infiniband/hw/amso1100/c2.c
new file mode 100644
index 00000000000..9e9120f3601
--- /dev/null
+++ b/drivers/infiniband/hw/amso1100/c2.c
@@ -0,0 +1,1255 @@
+/*
+ * Copyright (c) 2005 Ammasso, Inc. All rights reserved.
+ * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/crc32.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+
+#include <rdma/ib_smi.h>
+#include "c2.h"
+#include "c2_provider.h"
+
+MODULE_AUTHOR("Tom Tucker <tom@opengridcomputing.com>");
+MODULE_DESCRIPTION("Ammasso AMSO1100 Low-level iWARP Driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
+    | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
+
+static int debug = -1;		/* defaults above */
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+static int c2_up(struct net_device *netdev);
+static int c2_down(struct net_device *netdev);
+static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+static void c2_tx_interrupt(struct net_device *netdev);
+static void c2_rx_interrupt(struct net_device *netdev);
+static irqreturn_t c2_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void c2_tx_timeout(struct net_device *netdev);
+static int c2_change_mtu(struct net_device *netdev, int new_mtu);
+static void c2_reset(struct c2_port *c2_port);
+static struct net_device_stats *c2_get_stats(struct net_device *netdev);
+
+static struct pci_device_id c2_pci_table[] = {
+	{ PCI_DEVICE(0x18b8, 0xb001) },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, c2_pci_table);
+
+static void c2_print_macaddr(struct net_device *netdev)
+{
+	pr_debug("%s: MAC %02X:%02X:%02X:%02X:%02X:%02X, "
+		"IRQ %u\n", netdev->name,
+		netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
+		netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5],
+		netdev->irq);
+}
+
+static void c2_set_rxbufsize(struct c2_port *c2_port)
+{
+	struct net_device *netdev = c2_port->netdev;
+
+	if (netdev->mtu > RX_BUF_SIZE)
+		c2_port->rx_buf_size =
+		    netdev->mtu + ETH_HLEN + sizeof(struct c2_rxp_hdr) +
+		    NET_IP_ALIGN;
+	else
+		c2_port->rx_buf_size = sizeof(struct c2_rxp_hdr) + RX_BUF_SIZE;
+}
+
+/*
+ * Allocate TX ring elements and chain them together.
+ * One-to-one association of adapter descriptors with ring elements.
+ */
+static int c2_tx_ring_alloc(struct c2_ring *tx_ring, void *vaddr,
+			    dma_addr_t base, void __iomem * mmio_txp_ring)
+{
+	struct c2_tx_desc *tx_desc;
+	struct c2_txp_desc __iomem *txp_desc;
+	struct c2_element *elem;
+	int i;
+
+	tx_ring->start = kmalloc(sizeof(*elem) * tx_ring->count, GFP_KERNEL);
+	if (!tx_ring->start)
+		return -ENOMEM;
+
+	elem = tx_ring->start;
+	tx_desc = vaddr;
+	txp_desc = mmio_txp_ring;
+	for (i = 0; i < tx_ring->count; i++, elem++, tx_desc++, txp_desc++) {
+		tx_desc->len = 0;
+		tx_desc->status = 0;
+
+		/* Set TXP_HTXD_UNINIT */
+		__raw_writeq(cpu_to_be64(0x1122334455667788ULL),
+			     (void __iomem *) txp_desc + C2_TXP_ADDR);
+		__raw_writew(0, (void __iomem *) txp_desc + C2_TXP_LEN);
+		__raw_writew(cpu_to_be16(TXP_HTXD_UNINIT),
+			     (void __iomem *) txp_desc + C2_TXP_FLAGS);
+
+		elem->skb = NULL;
+		elem->ht_desc = tx_desc;
+		elem->hw_desc = txp_desc;
+
+		if (i == tx_ring->count - 1) {
+			elem->next = tx_ring->start;
+			tx_desc->next_offset = base;
+		} else {
+			elem->next = elem + 1;
+			tx_desc->next_offset =
+			    base + (i + 1) * sizeof(*tx_desc);
+		}
+	}
+
+	tx_ring->to_use = tx_ring->to_clean = tx_ring->start;
+
+	return 0;
+}
+
+/*
+ * Allocate RX ring elements and chain them together.
+ * One-to-one association of adapter descriptors with ring elements.
+ */
+static int c2_rx_ring_alloc(struct c2_ring *rx_ring, void *vaddr,
+			    dma_addr_t base, void __iomem * mmio_rxp_ring)
+{
+	struct c2_rx_desc *rx_desc;
+	struct c2_rxp_desc __iomem *rxp_desc;
+	struct c2_element *elem;
+	int i;
+
+	rx_ring->start = kmalloc(sizeof(*elem) * rx_ring->count, GFP_KERNEL);
+	if (!rx_ring->start)
+		return -ENOMEM;
+
+	elem = rx_ring->start;
+	rx_desc = vaddr;
+	rxp_desc = mmio_rxp_ring;
+	for (i = 0; i < rx_ring->count; i++, elem++, rx_desc++, rxp_desc++) {
+		rx_desc->len = 0;
+		rx_desc->status = 0;
+
+		/* Set RXP_HRXD_UNINIT */
+		__raw_writew(cpu_to_be16(RXP_HRXD_OK),
+		       (void __iomem *) rxp_desc + C2_RXP_STATUS);
+		__raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_COUNT);
+		__raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_LEN);
+		__raw_writeq(cpu_to_be64(0x99aabbccddeeffULL),
+			     (void __iomem *) rxp_desc + C2_RXP_ADDR);
+		__raw_writew(cpu_to_be16(RXP_HRXD_UNINIT),
+			     (void __iomem *) rxp_desc + C2_RXP_FLAGS);
+
+		elem->skb = NULL;
+		elem->ht_desc = rx_desc;
+		elem->hw_desc = rxp_desc;
+
+		if (i == rx_ring->count - 1) {
+			elem->next = rx_ring->start;
+			rx_desc->next_offset = base;
+		} else {
+			elem->next = elem + 1;
+			rx_desc->next_offset =
+			    base + (i + 1) * sizeof(*rx_desc);
+		}
+	}
+
+	rx_ring->to_use = rx_ring->to_clean = rx_ring->start;
+
+	return 0;
+}
+
+/* Setup buffer for receiving */
+static inline int c2_rx_alloc(struct c2_port *c2_port, struct c2_element *elem)
+{
+	struct c2_dev *c2dev = c2_port->c2dev;
+	struct c2_rx_desc *rx_desc = elem->ht_desc;
+	struct sk_buff *skb;
+	dma_addr_t mapaddr;
+	u32 maplen;
+	struct c2_rxp_hdr *rxp_hdr;
+
+	skb = dev_alloc_skb(c2_port->rx_buf_size);
+	if (unlikely(!skb)) {
+		pr_debug("%s: out of memory for receive\n",
+			c2_port->netdev->name);
+		return -ENOMEM;
+	}
+
+	/* Zero out the rxp hdr in the sk_buff */
+	memset(skb->data, 0, sizeof(*rxp_hdr));
+
+	skb->dev = c2_port->netdev;
+
+	maplen = c2_port->rx_buf_size;
+	mapaddr =
+	    pci_map_single(c2dev->pcidev, skb->data, maplen,
+			   PCI_DMA_FROMDEVICE);
+
+	/* Set the sk_buff RXP_header to RXP_HRXD_READY */
+	rxp_hdr = (struct c2_rxp_hdr *) skb->data;
+	rxp_hdr->flags = RXP_HRXD_READY;
+
+	__raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
+	__raw_writew(cpu_to_be16((u16) maplen - sizeof(*rxp_hdr)),
+		     elem->hw_desc + C2_RXP_LEN);
+	__raw_writeq(cpu_to_be64(mapaddr), elem->hw_desc + C2_RXP_ADDR);
+	__raw_writew(cpu_to_be16(RXP_HRXD_READY), elem->hw_desc + C2_RXP_FLAGS);
+
+	elem->skb = skb;
+	elem->mapaddr = mapaddr;
+	elem->maplen = maplen;
+	rx_desc->len = maplen;
+
+	return 0;
+}
+
+/*
+ * Allocate buffers for the Rx ring
+ * For receive:  rx_ring.to_clean is next received frame
+ */
+static int c2_rx_fill(struct c2_port *c2_port)
+{
+	struct c2_ring *rx_ring = &c2_port->rx_ring;
+	struct c2_element *elem;
+	int ret = 0;
+
+	elem = rx_ring->start;
+	do {
+		if (c2_rx_alloc(c2_port, elem)) {
+			ret = 1;
+			break;
+		}
+	} while ((elem = elem->next) != rx_ring->start);
+
+	rx_ring->to_clean = rx_ring->start;
+	return ret;
+}
+
+/* Free all buffers in RX ring, assumes receiver stopped */
+static void c2_rx_clean(struct c2_port *c2_port)
+{
+	struct c2_dev *c2dev = c2_port->c2dev;
+	struct c2_ring *rx_ring = &c2_port->rx_ring;
+	struct c2_element *elem;
+	struct c2_rx_desc *rx_desc;
+
+	elem = rx_ring->start;
+	do {
+		rx_desc = elem->ht_desc;
+		rx_desc->len = 0;
+
+		__raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
+		__raw_writew(0, elem->hw_desc + C2_RXP_COUNT);
+		__raw_writew(0, elem->hw_desc + C2_RXP_LEN);
+		__raw_writeq(cpu_to_be64(0x99aabbccddeeffULL),
+			     elem->hw_desc + C2_RXP_ADDR);
+		__raw_writew(cpu_to_be16(RXP_HRXD_UNINIT),
+			     elem->hw_desc + C2_RXP_FLAGS);
+
+		if (elem->skb) {
+			pci_unmap_single(c2dev->pcidev, elem->mapaddr,
+					 elem->maplen, PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(elem->skb);
+			elem->skb = NULL;
+		}
+	} while ((elem = elem->next) != rx_ring->start);
+}
+
+static inline int c2_tx_free(struct c2_dev *c2dev, struct c2_element *elem)
+{
+	struct c2_tx_desc *tx_desc = elem->ht_desc;
+
+	tx_desc->len = 0;
+
+	pci_unmap_single(c2dev->pcidev, elem->mapaddr, elem->maplen,
+			 PCI_DMA_TODEVICE);
+
+	if (elem->skb) {
+		dev_kfree_skb_any(elem->skb);
+		elem->skb = NULL;
+	}
+
+	return 0;
+}
+
+/* Free all buffers in TX ring, assumes transmitter stopped */
+static void c2_tx_clean(struct c2_port *c2_port)
+{
+	struct c2_ring *tx_ring = &c2_port->tx_ring;
+	struct c2_element *elem;
+	struct c2_txp_desc txp_htxd;
+	int retry;
+	unsigned long flags;
+
+	spin_lock_irqsave(&c2_port->tx_lock, flags);
+
+	elem = tx_ring->start;
+
+	do {
+		retry = 0;
+		do {
+			txp_htxd.flags =
+			    readw(elem->hw_desc + C2_TXP_FLAGS);
+
+			if (txp_htxd.flags == TXP_HTXD_READY) {
+				retry = 1;
+				__raw_writew(0,
+					     elem->hw_desc + C2_TXP_LEN);
+				__raw_writeq(0,
+					     elem->hw_desc + C2_TXP_ADDR);
+				__raw_writew(cpu_to_be16(TXP_HTXD_DONE),
+					     elem->hw_desc + C2_TXP_FLAGS);
+				c2_port->netstats.tx_dropped++;
+				break;
+			} else {
+				__raw_writew(0,
+					     elem->hw_desc + C2_TXP_LEN);
+				__raw_writeq(cpu_to_be64(0x1122334455667788ULL),
+					     elem->hw_desc + C2_TXP_ADDR);
+				__raw_writew(cpu_to_be16(TXP_HTXD_UNINIT),
+					     elem->hw_desc + C2_TXP_FLAGS);
+			}
+
+			c2_tx_free(c2_port->c2dev, elem);
+
+		} while ((elem = elem->next) != tx_ring->start);
+	} while (retry);
+
+	c2_port->tx_avail = c2_port->tx_ring.count - 1;
+	c2_port->c2dev->cur_tx = tx_ring->to_use - tx_ring->start;
+
+	if (c2_port->tx_avail > MAX_SKB_FRAGS + 1)
+		netif_wake_queue(c2_port->netdev);
+
+	spin_unlock_irqrestore(&c2_port->tx_lock, flags);
+}
+
+/*
+ * Process transmit descriptors marked 'DONE' by the firmware,
+ * freeing up their unneeded sk_buffs.
+ */
+static void c2_tx_interrupt(struct net_device *netdev)
+{
+	struct c2_port *c2_port = netdev_priv(netdev);
+	struct c2_dev *c2dev = c2_port->c2dev;
+	struct c2_ring *tx_ring = &c2_port->tx_ring;
+	struct c2_element *elem;
+	struct c2_txp_desc txp_htxd;
+
+	spin_lock(&c2_port->tx_lock);
+
+	for (elem = tx_ring->to_clean; elem != tx_ring->to_use;
+	     elem = elem->next) {
+		txp_htxd.flags =
+		    be16_to_cpu(readw(elem->hw_desc + C2_TXP_FLAGS));
+
+		if (txp_htxd.flags != TXP_HTXD_DONE)
+			break;
+
+		if (netif_msg_tx_done(c2_port)) {
+			/* PCI reads are expensive in fast path */
+			txp_htxd.len =
+			    be16_to_cpu(readw(elem->hw_desc + C2_TXP_LEN));
+			pr_debug("%s: tx done slot %3Zu status 0x%x len "
+				"%5u bytes\n",
+				netdev->name, elem - tx_ring->start,
+				txp_htxd.flags, txp_htxd.len);
+		}
+
+		c2_tx_free(c2dev, elem);
+		++(c2_port->tx_avail);
+	}
+
+	tx_ring->to_clean = elem;
+
+	if (netif_queue_stopped(netdev)
+	    && c2_port->tx_avail > MAX_SKB_FRAGS + 1)
+		netif_wake_queue(netdev);
+
+	spin_unlock(&c2_port->tx_lock);
+}
+
+static void c2_rx_error(struct c2_port *c2_port, struct c2_element *elem)
+{
+	struct c2_rx_desc *rx_desc = elem->ht_desc;
+	struct c2_rxp_hdr *rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data;
+
+	if (rxp_hdr->status != RXP_HRXD_OK ||
+	    rxp_hdr->len > (rx_desc->len - sizeof(*rxp_hdr))) {
+		pr_debug("BAD RXP_HRXD\n");
+		pr_debug("  rx_desc : %p\n", rx_desc);
+		pr_debug("    index : %Zu\n",
+			elem - c2_port->rx_ring.start);
+		pr_debug("    len   : %u\n", rx_desc->len);
+		pr_debug("  rxp_hdr : %p [PA %p]\n", rxp_hdr,
+			(void *) __pa((unsigned long) rxp_hdr));
+		pr_debug("    flags : 0x%x\n", rxp_hdr->flags);
+		pr_debug("    status: 0x%x\n", rxp_hdr->status);
+		pr_debug("    len   : %u\n", rxp_hdr->len);
+		pr_debug("    rsvd  : 0x%x\n", rxp_hdr->rsvd);
+	}
+
+	/* Setup the skb for reuse since we're dropping this pkt */
+	elem->skb->tail = elem->skb->data = elem->skb->head;
+
+	/* Zero out the rxp hdr in the sk_buff */
+	memset(elem->skb->data, 0, sizeof(*rxp_hdr));
+
+	/* Write the descriptor to the adapter's rx ring */
+	__raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
+	__raw_writew(0, elem->hw_desc + C2_RXP_COUNT);
+	__raw_writew(cpu_to_be16((u16) elem->maplen - sizeof(*rxp_hdr)),
+		     elem->hw_desc + C2_RXP_LEN);
+	__raw_writeq(cpu_to_be64(elem->mapaddr), elem->hw_desc + C2_RXP_ADDR);
+	__raw_writew(cpu_to_be16(RXP_HRXD_READY), elem->hw_desc + C2_RXP_FLAGS);
+
+	pr_debug("packet dropped\n");
+	c2_port->netstats.rx_dropped++;
+}
+
+static void c2_rx_interrupt(struct net_device *netdev)
+{
+	struct c2_port *c2_port = netdev_priv(netdev);
+	struct c2_dev *c2dev = c2_port->c2dev;
+	struct c2_ring *rx_ring = &c2_port->rx_ring;
+	struct c2_element *elem;
+	struct c2_rx_desc *rx_desc;
+	struct c2_rxp_hdr *rxp_hdr;
+	struct sk_buff *skb;
+	dma_addr_t mapaddr;
+	u32 maplen, buflen;
+	unsigned long flags;
+
+	spin_lock_irqsave(&c2dev->lock, flags);
+
+	/* Begin where we left off */
+	rx_ring->to_clean = rx_ring->start + c2dev->cur_rx;
+
+	for (elem = rx_ring->to_clean; elem->next != rx_ring->to_clean;
+	     elem = elem->next) {
+		rx_desc = elem->ht_desc;
+		mapaddr = elem->mapaddr;
+		maplen = elem->maplen;
+		skb = elem->skb;
+		rxp_hdr = (struct c2_rxp_hdr *) skb->data;
+
+		if (rxp_hdr->flags != RXP_HRXD_DONE)
+			break;
+		buflen = rxp_hdr->len;
+
+		/* Sanity check the RXP header */
+		if (rxp_hdr->status != RXP_HRXD_OK ||
+		    buflen > (rx_desc->len - sizeof(*rxp_hdr))) {
+			c2_rx_error(c2_port, elem);
+			continue;
+		}
+
+		/*
+		 * Allocate and map a new skb for replenishing the host
+		 * RX desc
+		 */
+		if (c2_rx_alloc(c2_port, elem)) {
+			c2_rx_error(c2_port, elem);
+			continue;
+		}
+
+		/* Unmap the old skb */
+		pci_unmap_single(c2dev->pcidev, mapaddr, maplen,
+				 PCI_DMA_FROMDEVICE);
+
+		prefetch(skb->data);
+
+		/*
+		 * Skip past the leading 8 bytes comprising of the
+		 * "struct c2_rxp_hdr", prepended by the adapter
+		 * to the usual Ethernet header ("struct ethhdr"),
+		 * to the start of the raw Ethernet packet.
+		 *
+		 * Fix up the various fields in the sk_buff before
+		 * passing it up to netif_rx(). The transfer size
+		 * (in bytes) specified by the adapter len field of
+		 * the "struct rxp_hdr_t" does NOT include the
+		 * "sizeof(struct c2_rxp_hdr)".
+		 */
+		skb->data += sizeof(*rxp_hdr);
+		skb->tail = skb->data + buflen;
+		skb->len = buflen;
+		skb->dev = netdev;
+		skb->protocol = eth_type_trans(skb, netdev);
+
+		netif_rx(skb);
+
+		netdev->last_rx = jiffies;
+		c2_port->netstats.rx_packets++;
+		c2_port->netstats.rx_bytes += buflen;
+	}
+
+	/* Save where we left off */
+	rx_ring->to_clean = elem;
+	c2dev->cur_rx = elem - rx_ring->start;
+	C2_SET_CUR_RX(c2dev, c2dev->cur_rx);
+
+	spin_unlock_irqrestore(&c2dev->lock, flags);
+}
+
+/*
+ * Handle netisr0 TX & RX interrupts.
+ */
+static irqreturn_t c2_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned int netisr0, dmaisr;
+	int handled = 0;
+	struct c2_dev *c2dev = (struct c2_dev *) dev_id;
+
+	/* Process CCILNET interrupts */
+	netisr0 = readl(c2dev->regs + C2_NISR0);
+	if (netisr0) {
+
+		/*
+		 * There is an issue with the firmware that always
+		 * provides the status of RX for both TX & RX
+		 * interrupts.  So process both queues here.
+		 */
+		c2_rx_interrupt(c2dev->netdev);
+		c2_tx_interrupt(c2dev->netdev);
+
+		/* Clear the interrupt */
+		writel(netisr0, c2dev->regs + C2_NISR0);
+		handled++;
+	}
+
+	/* Process RNIC interrupts */
+	dmaisr = readl(c2dev->regs + C2_DISR);
+	if (dmaisr) {
+		writel(dmaisr, c2dev->regs + C2_DISR);
+		c2_rnic_interrupt(c2dev);
+		handled++;
+	}
+
+	if (handled) {
+		return IRQ_HANDLED;
+	} else {
+		return IRQ_NONE;
+	}
+}
+
+static int c2_up(struct net_device *netdev)
+{
+	struct c2_port *c2_port = netdev_priv(netdev);
+	struct c2_dev *c2dev = c2_port->c2dev;
+	struct c2_element *elem;
+	struct c2_rxp_hdr *rxp_hdr;
+	struct in_device *in_dev;
+	size_t rx_size, tx_size;
+	int ret, i;
+	unsigned int netimr0;
+
+	if (netif_msg_ifup(c2_port))
+		pr_debug("%s: enabling interface\n", netdev->name);
+
+	/* Set the Rx buffer size based on MTU */
+	c2_set_rxbufsize(c2_port);
+
+	/* Allocate DMA'able memory for Tx/Rx host descriptor rings */
+	rx_size = c2_port->rx_ring.count * sizeof(struct c2_rx_desc);
+	tx_size = c2_port->tx_ring.count * sizeof(struct c2_tx_desc);
+
+	c2_port->mem_size = tx_size + rx_size;
+	c2_port->mem = pci_alloc_consistent(c2dev->pcidev, c2_port->mem_size,
+					    &c2_port->dma);
+	if (c2_port->mem == NULL) {
+		pr_debug("Unable to allocate memory for "
+			"host descriptor rings\n");
+		return -ENOMEM;
+	}
+
+	memset(c2_port->mem, 0, c2_port->mem_size);
+
+	/* Create the Rx host descriptor ring */
+	if ((ret =
+	     c2_rx_ring_alloc(&c2_port->rx_ring, c2_port->mem, c2_port->dma,
+			      c2dev->mmio_rxp_ring))) {
+		pr_debug("Unable to create RX ring\n");
+		goto bail0;
+	}
+
+	/* Allocate Rx buffers for the host descriptor ring */
+	if (c2_rx_fill(c2_port)) {
+		pr_debug("Unable to fill RX ring\n");
+		goto bail1;
+	}
+
+	/* Create the Tx host descriptor ring */
+	if ((ret = c2_tx_ring_alloc(&c2_port->tx_ring, c2_port->mem + rx_size,
+				    c2_port->dma + rx_size,
+				    c2dev->mmio_txp_ring))) {
+		pr_debug("Unable to create TX ring\n");
+		goto bail1;
+	}
+
+	/* Set the TX pointer to where we left off */
+	c2_port->tx_avail = c2_port->tx_ring.count - 1;
+	c2_port->tx_ring.to_use = c2_port->tx_ring.to_clean =
+	    c2_port->tx_ring.start + c2dev->cur_tx;
+
+	/* missing: Initialize MAC */
+
+	BUG_ON(c2_port->tx_ring.to_use != c2_port->tx_ring.to_clean);
+
+	/* Reset the adapter, ensures the driver is in sync with the RXP */
+	c2_reset(c2_port);
+
+	/* Reset the READY bit in the sk_buff RXP headers & adapter HRXDQ */
+	for (i = 0, elem = c2_port->rx_ring.start; i < c2_port->rx_ring.count;
+	     i++, elem++) {
+		rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data;
+		rxp_hdr->flags = 0;
+		__raw_writew(cpu_to_be16(RXP_HRXD_READY),
+			     elem->hw_desc + C2_RXP_FLAGS);
+	}
+
+	/* Enable network packets */
+	netif_start_queue(netdev);
+
+	/* Enable IRQ */
+	writel(0, c2dev->regs + C2_IDIS);
+	netimr0 = readl(c2dev->regs + C2_NIMR0);
+	netimr0 &= ~(C2_PCI_HTX_INT | C2_PCI_HRX_INT);
+	writel(netimr0, c2dev->regs + C2_NIMR0);
+
+	/* Tell the stack to ignore arp requests for ipaddrs bound to
+	 * other interfaces.  This is needed to prevent the host stack
+	 * from responding to arp requests to the ipaddr bound on the
+	 * rdma interface.
+	 */
+	in_dev = in_dev_get(netdev);
+	in_dev->cnf.arp_ignore = 1;
+	in_dev_put(in_dev);
+
+	return 0;
+
+      bail1:
+	c2_rx_clean(c2_port);
+	kfree(c2_port->rx_ring.start);
+
+      bail0:
+	pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem,
+			    c2_port->dma);
+
+	return ret;
+}
+
+static int c2_down(struct net_device *netdev)
+{
+	struct c2_port *c2_port = netdev_priv(netdev);
+	struct c2_dev *c2dev = c2_port->c2dev;
+
+	if (netif_msg_ifdown(c2_port))
+		pr_debug("%s: disabling interface\n",
+			netdev->name);
+
+	/* Wait for all the queued packets to get sent */
+	c2_tx_interrupt(netdev);
+
+	/* Disable network packets */
+	netif_stop_queue(netdev);
+
+	/* Disable IRQs by clearing the interrupt mask */
+	writel(1, c2dev->regs + C2_IDIS);
+	writel(0, c2dev->regs + C2_NIMR0);
+
+	/* missing: Stop transmitter */
+
+	/* missing: Stop receiver */
+
+	/* Reset the adapter, ensures the driver is in sync with the RXP */
+	c2_reset(c2_port);
+
+	/* missing: Turn off LEDs here */
+
+	/* Free all buffers in the host descriptor rings */
+	c2_tx_clean(c2_port);
+	c2_rx_clean(c2_port);
+
+	/* Free the host descriptor rings */
+	kfree(c2_port->rx_ring.start);
+	kfree(c2_port->tx_ring.start);
+	pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem,
+			    c2_port->dma);
+
+	return 0;
+}
+
+static void c2_reset(struct c2_port *c2_port)
+{
+	struct c2_dev *c2dev = c2_port->c2dev;
+	unsigned int cur_rx = c2dev->cur_rx;
+
+	/* Tell the hardware to quiesce */
+	C2_SET_CUR_RX(c2dev, cur_rx | C2_PCI_HRX_QUI);
+
+	/*
+	 * The hardware will reset the C2_PCI_HRX_QUI bit once
+	 * the RXP is quiesced.  Wait 2 seconds for this.
+	 */
+	ssleep(2);
+
+	cur_rx = C2_GET_CUR_RX(c2dev);
+
+	if (cur_rx & C2_PCI_HRX_QUI)
+		pr_debug("c2_reset: failed to quiesce the hardware!\n");
+
+	cur_rx &= ~C2_PCI_HRX_QUI;
+
+	c2dev->cur_rx = cur_rx;
+
+	pr_debug("Current RX: %u\n", c2dev->cur_rx);
+}
+
+static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct c2_port *c2_port = netdev_priv(netdev);
+	struct c2_dev *c2dev = c2_port->c2dev;
+	struct c2_ring *tx_ring = &c2_port->tx_ring;
+	struct c2_element *elem;
+	dma_addr_t mapaddr;
+	u32 maplen;
+	unsigned long flags;
+	unsigned int i;
+
+	spin_lock_irqsave(&c2_port->tx_lock, flags);
+
+	if (unlikely(c2_port->tx_avail < (skb_shinfo(skb)->nr_frags + 1))) {
+		netif_stop_queue(netdev);
+		spin_unlock_irqrestore(&c2_port->tx_lock, flags);
+
+		pr_debug("%s: Tx ring full when queue awake!\n",
+			netdev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	maplen = skb_headlen(skb);
+	mapaddr =
+	    pci_map_single(c2dev->pcidev, skb->data, maplen, PCI_DMA_TODEVICE);
+
+	elem = tx_ring->to_use;
+	elem->skb = skb;
+	elem->mapaddr = mapaddr;
+	elem->maplen = maplen;
+
+	/* Tell HW to xmit */
+	__raw_writeq(cpu_to_be64(mapaddr), elem->hw_desc + C2_TXP_ADDR);
+	__raw_writew(cpu_to_be16(maplen), elem->hw_desc + C2_TXP_LEN);
+	__raw_writew(cpu_to_be16(TXP_HTXD_READY), elem->hw_desc + C2_TXP_FLAGS);
+
+	c2_port->netstats.tx_packets++;
+	c2_port->netstats.tx_bytes += maplen;
+
+	/* Loop thru additional data fragments and queue them */
+	if (skb_shinfo(skb)->nr_frags) {
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			maplen = frag->size;
+			mapaddr =
+			    pci_map_page(c2dev->pcidev, frag->page,
+					 frag->page_offset, maplen,
+					 PCI_DMA_TODEVICE);
+
+			elem = elem->next;
+			elem->skb = NULL;
+			elem->mapaddr = mapaddr;
+			elem->maplen = maplen;
+
+			/* Tell HW to xmit */
+			__raw_writeq(cpu_to_be64(mapaddr),
+				     elem->hw_desc + C2_TXP_ADDR);
+			__raw_writew(cpu_to_be16(maplen),
+				     elem->hw_desc + C2_TXP_LEN);
+			__raw_writew(cpu_to_be16(TXP_HTXD_READY),
+				     elem->hw_desc + C2_TXP_FLAGS);
+
+			c2_port->netstats.tx_packets++;
+			c2_port->netstats.tx_bytes += maplen;
+		}
+	}
+
+	tx_ring->to_use = elem->next;
+	c2_port->tx_avail -= (skb_shinfo(skb)->nr_frags + 1);
+
+	if (c2_port->tx_avail <= MAX_SKB_FRAGS + 1) {
+		netif_stop_queue(netdev);
+		if (netif_msg_tx_queued(c2_port))
+			pr_debug("%s: transmit queue full\n",
+				netdev->name);
+	}
+
+	spin_unlock_irqrestore(&c2_port->tx_lock, flags);
+
+	netdev->trans_start = jiffies;
+
+	return NETDEV_TX_OK;
+}
+
+static struct net_device_stats *c2_get_stats(struct net_device *netdev)
+{
+	struct c2_port *c2_port = netdev_priv(netdev);
+
+	return &c2_port->netstats;
+}
+
+static void c2_tx_timeout(struct net_device *netdev)
+{
+	struct c2_port *c2_port = netdev_priv(netdev);
+
+	if (netif_msg_timer(c2_port))
+		pr_debug("%s: tx timeout\n", netdev->name);
+
+	c2_tx_clean(c2_port);
+}
+
+static int c2_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	int ret = 0;
+
+	if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
+		return -EINVAL;
+
+	netdev->mtu = new_mtu;
+
+	if (netif_running(netdev)) {
+		c2_down(netdev);
+
+		c2_up(netdev);
+	}
+
+	return ret;
+}
+
+/* Initialize network device */
+static struct net_device *c2_devinit(struct c2_dev *c2dev,
+				     void __iomem * mmio_addr)
+{
+	struct c2_port *c2_port = NULL;
+	struct net_device *netdev = alloc_etherdev(sizeof(*c2_port));
+
+	if (!netdev) {
+		pr_debug("c2_port etherdev alloc failed");
+		return NULL;
+	}
+
+	SET_MODULE_OWNER(netdev);
+	SET_NETDEV_DEV(netdev, &c2dev->pcidev->dev);
+
+	netdev->open = c2_up;
+	netdev->stop = c2_down;
+	netdev->hard_start_xmit = c2_xmit_frame;
+	netdev->get_stats = c2_get_stats;
+	netdev->tx_timeout = c2_tx_timeout;
+	netdev->change_mtu = c2_change_mtu;
+	netdev->watchdog_timeo = C2_TX_TIMEOUT;
+	netdev->irq = c2dev->pcidev->irq;
+
+	c2_port = netdev_priv(netdev);
+	c2_port->netdev = netdev;
+	c2_port->c2dev = c2dev;
+	c2_port->msg_enable = netif_msg_init(debug, default_msg);
+	c2_port->tx_ring.count = C2_NUM_TX_DESC;
+	c2_port->rx_ring.count = C2_NUM_RX_DESC;
+
+	spin_lock_init(&c2_port->tx_lock);
+
+	/* Copy our 48-bit ethernet hardware address */
+	memcpy_fromio(netdev->dev_addr, mmio_addr + C2_REGS_ENADDR, 6);
+
+	/* Validate the MAC address */
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
+		pr_debug("Invalid MAC Address\n");
+		c2_print_macaddr(netdev);
+		free_netdev(netdev);
+		return NULL;
+	}
+
+	c2dev->netdev = netdev;
+
+	return netdev;
+}
+
+static int __devinit c2_probe(struct pci_dev *pcidev,
+			      const struct pci_device_id *ent)
+{
+	int ret = 0, i;
+	unsigned long reg0_start, reg0_flags, reg0_len;
+	unsigned long reg2_start, reg2_flags, reg2_len;
+	unsigned long reg4_start, reg4_flags, reg4_len;
+	unsigned kva_map_size;
+	struct net_device *netdev = NULL;
+	struct c2_dev *c2dev = NULL;
+	void __iomem *mmio_regs = NULL;
+
+	printk(KERN_INFO PFX "AMSO1100 Gigabit Ethernet driver v%s loaded\n",
+		DRV_VERSION);
+
+	/* Enable PCI device */
+	ret = pci_enable_device(pcidev);
+	if (ret) {
+		printk(KERN_ERR PFX "%s: Unable to enable PCI device\n",
+			pci_name(pcidev));
+		goto bail0;
+	}
+
+	reg0_start = pci_resource_start(pcidev, BAR_0);
+	reg0_len = pci_resource_len(pcidev, BAR_0);
+	reg0_flags = pci_resource_flags(pcidev, BAR_0);
+
+	reg2_start = pci_resource_start(pcidev, BAR_2);
+	reg2_len = pci_resource_len(pcidev, BAR_2);
+	reg2_flags = pci_resource_flags(pcidev, BAR_2);
+
+	reg4_start = pci_resource_start(pcidev, BAR_4);
+	reg4_len = pci_resource_len(pcidev, BAR_4);
+	reg4_flags = pci_resource_flags(pcidev, BAR_4);
+
+	pr_debug("BAR0 size = 0x%lX bytes\n", reg0_len);
+	pr_debug("BAR2 size = 0x%lX bytes\n", reg2_len);
+	pr_debug("BAR4 size = 0x%lX bytes\n", reg4_len);
+
+	/* Make sure PCI base addr are MMIO */
+	if (!(reg0_flags & IORESOURCE_MEM) ||
+	    !(reg2_flags & IORESOURCE_MEM) || !(reg4_flags & IORESOURCE_MEM)) {
+		printk(KERN_ERR PFX "PCI regions not an MMIO resource\n");
+		ret = -ENODEV;
+		goto bail1;
+	}
+
+	/* Check for weird/broken PCI region reporting */
+	if ((reg0_len < C2_REG0_SIZE) ||
+	    (reg2_len < C2_REG2_SIZE) || (reg4_len < C2_REG4_SIZE)) {
+		printk(KERN_ERR PFX "Invalid PCI region sizes\n");
+		ret = -ENODEV;
+		goto bail1;
+	}
+
+	/* Reserve PCI I/O and memory resources */
+	ret = pci_request_regions(pcidev, DRV_NAME);
+	if (ret) {
+		printk(KERN_ERR PFX "%s: Unable to request regions\n",
+			pci_name(pcidev));
+		goto bail1;
+	}
+
+	if ((sizeof(dma_addr_t) > 4)) {
+		ret = pci_set_dma_mask(pcidev, DMA_64BIT_MASK);
+		if (ret < 0) {
+			printk(KERN_ERR PFX "64b DMA configuration failed\n");
+			goto bail2;
+		}
+	} else {
+		ret = pci_set_dma_mask(pcidev, DMA_32BIT_MASK);
+		if (ret < 0) {
+			printk(KERN_ERR PFX "32b DMA configuration failed\n");
+			goto bail2;
+		}
+	}
+
+	/* Enables bus-mastering on the device */
+	pci_set_master(pcidev);
+
+	/* Remap the adapter PCI registers in BAR4 */
+	mmio_regs = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET,
+				    sizeof(struct c2_adapter_pci_regs));
+	if (mmio_regs == 0UL) {
+		printk(KERN_ERR PFX
+			"Unable to remap adapter PCI registers in BAR4\n");
+		ret = -EIO;
+		goto bail2;
+	}
+
+	/* Validate PCI regs magic */
+	for (i = 0; i < sizeof(c2_magic); i++) {
+		if (c2_magic[i] != readb(mmio_regs + C2_REGS_MAGIC + i)) {
+			printk(KERN_ERR PFX "Downlevel Firmware boot loader "
+				"[%d/%Zd: got 0x%x, exp 0x%x]. Use the cc_flash "
+			       "utility to update your boot loader\n",
+				i + 1, sizeof(c2_magic),
+				readb(mmio_regs + C2_REGS_MAGIC + i),
+				c2_magic[i]);
+			printk(KERN_ERR PFX "Adapter not claimed\n");
+			iounmap(mmio_regs);
+			ret = -EIO;
+			goto bail2;
+		}
+	}
+
+	/* Validate the adapter version */
+	if (be32_to_cpu(readl(mmio_regs + C2_REGS_VERS)) != C2_VERSION) {
+		printk(KERN_ERR PFX "Version mismatch "
+			"[fw=%u, c2=%u], Adapter not claimed\n",
+			be32_to_cpu(readl(mmio_regs + C2_REGS_VERS)),
+			C2_VERSION);
+		ret = -EINVAL;
+		iounmap(mmio_regs);
+		goto bail2;
+	}
+
+	/* Validate the adapter IVN */
+	if (be32_to_cpu(readl(mmio_regs + C2_REGS_IVN)) != C2_IVN) {
+		printk(KERN_ERR PFX "Downlevel FIrmware level. You should be using "
+		       "the OpenIB device support kit. "
+		       "[fw=0x%x, c2=0x%x], Adapter not claimed\n",
+			be32_to_cpu(readl(mmio_regs + C2_REGS_IVN)),
+			C2_IVN);
+		ret = -EINVAL;
+		iounmap(mmio_regs);
+		goto bail2;
+	}
+
+	/* Allocate hardware structure */
+	c2dev = (struct c2_dev *) ib_alloc_device(sizeof(*c2dev));
+	if (!c2dev) {
+		printk(KERN_ERR PFX "%s: Unable to alloc hardware struct\n",
+			pci_name(pcidev));
+		ret = -ENOMEM;
+		iounmap(mmio_regs);
+		goto bail2;
+	}
+
+	memset(c2dev, 0, sizeof(*c2dev));
+	spin_lock_init(&c2dev->lock);
+	c2dev->pcidev = pcidev;
+	c2dev->cur_tx = 0;
+
+	/* Get the last RX index */
+	c2dev->cur_rx =
+	    (be32_to_cpu(readl(mmio_regs + C2_REGS_HRX_CUR)) -
+	     0xffffc000) / sizeof(struct c2_rxp_desc);
+
+	/* Request an interrupt line for the driver */
+	ret = request_irq(pcidev->irq, c2_interrupt, SA_SHIRQ, DRV_NAME, c2dev);
+	if (ret) {
+		printk(KERN_ERR PFX "%s: requested IRQ %u is busy\n",
+			pci_name(pcidev), pcidev->irq);
+		iounmap(mmio_regs);
+		goto bail3;
+	}
+
+	/* Set driver specific data */
+	pci_set_drvdata(pcidev, c2dev);
+
+	/* Initialize network device */
+	if ((netdev = c2_devinit(c2dev, mmio_regs)) == NULL) {
+		iounmap(mmio_regs);
+		goto bail4;
+	}
+
+	/* Save off the actual size prior to unmapping mmio_regs */
+	kva_map_size = be32_to_cpu(readl(mmio_regs + C2_REGS_PCI_WINSIZE));
+
+	/* Unmap the adapter PCI registers in BAR4 */
+	iounmap(mmio_regs);
+
+	/* Register network device */
+	ret = register_netdev(netdev);
+	if (ret) {
+		printk(KERN_ERR PFX "Unable to register netdev, ret = %d\n",
+			ret);
+		goto bail5;
+	}
+
+	/* Disable network packets */
+	netif_stop_queue(netdev);
+
+	/* Remap the adapter HRXDQ PA space to kernel VA space */
+	c2dev->mmio_rxp_ring = ioremap_nocache(reg4_start + C2_RXP_HRXDQ_OFFSET,
+					       C2_RXP_HRXDQ_SIZE);
+	if (c2dev->mmio_rxp_ring == 0UL) {
+		printk(KERN_ERR PFX "Unable to remap MMIO HRXDQ region\n");
+		ret = -EIO;
+		goto bail6;
+	}
+
+	/* Remap the adapter HTXDQ PA space to kernel VA space */
+	c2dev->mmio_txp_ring = ioremap_nocache(reg4_start + C2_TXP_HTXDQ_OFFSET,
+					       C2_TXP_HTXDQ_SIZE);
+	if (c2dev->mmio_txp_ring == 0UL) {
+		printk(KERN_ERR PFX "Unable to remap MMIO HTXDQ region\n");
+		ret = -EIO;
+		goto bail7;
+	}
+
+	/* Save off the current RX index in the last 4 bytes of the TXP Ring */
+	C2_SET_CUR_RX(c2dev, c2dev->cur_rx);
+
+	/* Remap the PCI registers in adapter BAR0 to kernel VA space */
+	c2dev->regs = ioremap_nocache(reg0_start, reg0_len);
+	if (c2dev->regs == 0UL) {
+		printk(KERN_ERR PFX "Unable to remap BAR0\n");
+		ret = -EIO;
+		goto bail8;
+	}
+
+	/* Remap the PCI registers in adapter BAR4 to kernel VA space */
+	c2dev->pa = reg4_start + C2_PCI_REGS_OFFSET;
+	c2dev->kva = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET,
+				     kva_map_size);
+	if (c2dev->kva == 0UL) {
+		printk(KERN_ERR PFX "Unable to remap BAR4\n");
+		ret = -EIO;
+		goto bail9;
+	}
+
+	/* Print out the MAC address */
+	c2_print_macaddr(netdev);
+
+	ret = c2_rnic_init(c2dev);
+	if (ret) {
+		printk(KERN_ERR PFX "c2_rnic_init failed: %d\n", ret);
+		goto bail10;
+	}
+
+	c2_register_device(c2dev);
+
+	return 0;
+
+ bail10:
+	iounmap(c2dev->kva);
+
+ bail9:
+	iounmap(c2dev->regs);
+
+ bail8:
+	iounmap(c2dev->mmio_txp_ring);
+
+ bail7:
+	iounmap(c2dev->mmio_rxp_ring);
+
+ bail6:
+	unregister_netdev(netdev);
+
+ bail5:
+	free_netdev(netdev);
+
+ bail4:
+	free_irq(pcidev->irq, c2dev);
+
+ bail3:
+	ib_dealloc_device(&c2dev->ibdev);
+
+ bail2:
+	pci_release_regions(pcidev);
+
+ bail1:
+	pci_disable_device(pcidev);
+
+ bail0:
+	return ret;
+}
+
+static void __devexit c2_remove(struct pci_dev *pcidev)
+{
+	struct c2_dev *c2dev = pci_get_drvdata(pcidev);
+	struct net_device *netdev = c2dev->netdev;
+
+	/* Unregister with OpenIB */
+	c2_unregister_device(c2dev);
+
+	/* Clean up the RNIC resources */
+	c2_rnic_term(c2dev);
+
+	/* Remove network device from the kernel */
+	unregister_netdev(netdev);
+
+	/* Free network device */
+	free_netdev(netdev);
+
+	/* Free the interrupt line */
+	free_irq(pcidev->irq, c2dev);
+
+	/* missing: Turn LEDs off here */
+
+	/* Unmap adapter PA space */
+	iounmap(c2dev->kva);
+	iounmap(c2dev->regs);
+	iounmap(c2dev->mmio_txp_ring);
+	iounmap(c2dev->mmio_rxp_ring);
+
+	/* Free the hardware structure */
+	ib_dealloc_device(&c2dev->ibdev);
+
+	/* Release reserved PCI I/O and memory resources */
+	pci_release_regions(pcidev);
+
+	/* Disable PCI device */
+	pci_disable_device(pcidev);
+
+	/* Clear driver specific data */
+	pci_set_drvdata(pcidev, NULL);
+}
+
+static struct pci_driver c2_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = c2_pci_table,
+	.probe = c2_probe,
+	.remove = __devexit_p(c2_remove),
+};
+
+static int __init c2_init_module(void)
+{
+	return pci_module_init(&c2_pci_driver);
+}
+
+static void __exit c2_exit_module(void)
+{
+	pci_unregister_driver(&c2_pci_driver);
+}
+
+module_init(c2_init_module);
+module_exit(c2_exit_module);